Activation of persulfate by magnetic MnFe2O4-bentonite for catalytic degradation of 2,4-dichlorophenol in aqueous solutions

Magnetic MnFe2O4/ZIF-67 nanocomposites with high activation of peroxymonosulfate for the degradation of tetracycline hydrochloride in wastewater

Advanced oxidation processes (AOPs) based on PMS have been used to degrade various refractory pollutants such as drugs, endocrine disruptors, dyes and perfluorinated compounds due to their wide application range, mild reaction conditions, fast reaction rate and simple operation. In this study, tetracycline hydrochloride (TCH) was degraded based on this method. Magnetic MnFe2O4/ZIF-67 nanocomposites were successfully prepared by a hydrothermal method, which combined the magnetic separation characteristics of MnFe2O4 with the high catalytic activity of ZIF-67 and were used to activate peroxymonosulfate (PMS) to efficiently degrade TCH. Satisfactory removal results were obtained with this simple and readily available material, with 82.6% of TCH removed in 15 min. The effect of different conditions on the degradation effect was investigated, and the optimal catalyst concentration and PMS concentration were determined to be 0.1 g L-1 and 0.2 g L-1, respectively, and all had good degradation effects at pH 5 to 10. XPS, impedance test and radical quenching experiments were used to investigate the degradation mechanism. The results showed that sulfate radical (SO4-˙) was the main active species in the degradation process. In addition, the catalyst has good cyclic stability, which provides a new idea for the removal of TCH in wastewater. It is worth mentioning that the catalyst also has good degradation property for other pollutants.

Degradation of tetracycline hydrochloride in aqueous via combined dielectric barrier discharge plasma and Fe-Mn doped AC

Dielectric barrier discharge (DBD) plasma coupled with Fe-Mn doped AC (Fe-Mn/AC) was used to enhance the degradation of tetracycline hydrochloride (TCH) wastewater. Fe-Mn/AC catalysts with different Fe/Mn molar ratios were prepared by hydrothermal method, and the physical and chemical properties of the samples were explored by different characterization techniques, including XRD, SEM, TEM and XPS. The results showed that the combination of DBD with Fe₂-Mn₁/AC system had the highest effect, and the degradation efficiency of TCH could reach 98.8 % after 15 min treatment, which was 25.5 % higher than that of DBD-only. With the increase of discharge voltage and catalyst dosage, the degradation efficiency of TCH promoted. And initial pH had little effect on the degradation of TCH. In the combined system, the Fe₂-Mn₁/AC catalyst could retain an excellent stability and reusability. The addition of dimethyl sulfoxide (DMSO) showed that ·OH participated in the TCH degradation. The generated O₃ might be catalyzed by Fe-Mn/AC catalyst to produce more ·OH. And more H₂O₂ was produced in DBD-only system than that in DBD-catalytic system. Nine main degradation intermediate products in the combined system were detected by HPLC-MS, and three possible degradation pathways were proposed.

Alkylpolyglycoside modified MnFe2O4 with abundant oxygen vacancies boosting singlet oxygen dominated peroxymonosulfate activation for organic pollutants degradation

A novel alkylpolyglycoside (APG)-modified MnFe₂O₄ nanocomposite (APG@MnFe₂O₄) enriched with oxygen vacancies (VOs) was developed via co-precipitation and characterized as a peroxymonosulfate (PMS) activator to degrade 2,4-dichlorophenol (2,4-DCP) as the model contaminant. The APG effectively promoted the in situ formation of VOs on MnFe₂O₄ and subsequently enhanced the production of singlet oxygen (¹O₂). Furthermore, the APG@MnFe₂O₄ initialized an even more efficient non-radical pathway and dominated the degradation of 2,4-DCP. The constructed APG@MnFe₂O₄ exhibited a much higher reaction rate constant (0.0522) by ~12.73 times of that of the bare MnFe₂O₄ (0.0041). The degradation efficiency of 2,4-DCP in the APG@MnFe₂O₄/PMS system approached 93% within 90 min, a rate significantly higher than that in the MnFe₂O₄/PMS system (32%) given the same condition. The reasonable catalytic mechanism can be attributed to the Fe/Mn/VOs species. The APG@MnFe₂O₄ also exhibits universally high removal activity for various pollutants and excellent cyclic stability. Thus, the APG@MnFe₂O₄ is a promising PMS activator, and its utilization offers a useful strategy for developing VOs-enriched MnFe₂O₄ catalysts as a means of eliminating organic pollutants from wastewater.

Mn-based catalysts for sulfate radical-based advanced oxidation processes: A review

Sulfate radical-based advanced oxidation processes (AOPs) have drawn increasing attention during the past two decades, and Mn-based materials have been proven to be effective catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS) to degrade many contaminants. This article presents a comprehensive review of various Mn-based materials to activate PMS and PDS. The activation mechanisms of different Mn-based catalysts (i.e., Mn oxides MnO_x, MnO_x hybrids, and MnO_x‑carbonaceous material composites) were first summarized and discussed in detail. Besides the commonly reported free radicals (SO₄^-• and ^•OH), non-radical mechanisms such as singlet oxygen and direct electron transfer have also been discovered for selected materials. The effects of pH, inorganic ions, natural organic matter (NOM), dissolved oxygen content, temperature, and the crystallinity of the materials on the catalytic reactivity were also discussed. Then, important instrumentations and technologies employed to characterize Mn-based materials and to understand the reaction mechanisms were concisely summarized. Three common overlooks in the experimental designs for examining the PMS/PDS-MnO_x systems were also discussed. Finally, future research directions were suggested to further improve the technology and to provide a guidance to develop cost-effective Mn-based materials to activate PMS/PDS.