Anti-corrosion Properties of 2-Phenyl-4(3H)-quinazolinone-Substituted Compounds: Electrochemical, Quantum Chemical, Monte Carlo, and Molecular Dynamic Simulation Investigation

Cysteine as an Eco-Friendly Anticorrosion Inhibitor for Mild Steel in Various Acidic Solutions: Electrochemical, Adsorption, Surface Analysis, and Quantum Chemical Calculations

The corrosion of iron in acidic environments has a negative impact on global industry. Herewith, the inhibitory effect of cysteine (Cys.) on mild steel (MSL) corrosion in different acidic solutions (1 M HCl, 1 M H2SO4, and 1 M H3PO4) was investigated through weight loss, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy, scanning electron microscopy (SEM), and theoretical calculations. The measurement results indicated that the adsorption of Cys. molecules on the metal surface caused corrosion inhibition. As a result, a protective layer or insoluble compound, or both, is obtained, blocking the active sites, preventing corrosion. The effectiveness (IE %) of the Cys. was enhanced by increasing concentration and lowering temperature. The maximum IE % of inhibition at 1 × 10-2 M of Cys. obtained are 97.3, 89.7, and 84.4% in HCl, H3PO4, and H2SO4 solutions, respectively. At the same inhibitor concentration, the double-layer capacity decreased, and the charge-transfer resistance increased from 17.17 to 188.5, 3.564 to 31.91, and 1.325 to 8.715 Ω cm2 in HCl, H3PO4, and H2SO4 solutions, respectively. Adsorption and PDP studies confirmed that it obeys the Langmuir adsorption isotherm and acts as a mixed-type inhibitor of physicochemical nature. The corresponding thermodynamic and kinetic parameters were also calculated and discussed. Moreover, the inhibitory effect on the surface was inspected by SEM. The findings demonstrated that the order of IE % using Cys as anticorrosion agent for MSL is HCl > H3PO4 > H2SO4 solutions.

[4-(3-Amino-4-mehoxy-5-methylphenyl)-1-oxo-1H-phthalaz-2-yl] acetic acid hydrazide and its synergetic effect with KI as a novel inhibitor for low carbon steel corrosion in 0.5 M H2SO4

We report the synthesis of novel [4-(3-amino-4-mehoxy-5-methyl phenyl)-1-oxo-1H-phthalaz-2-yl] acetic acid hydrazide (APPH), followed by its characterization using X-ray diffraction (XRD), Fourier transforms infrared (FT-IR) spectroscopy, ¹H-NMR spectroscopy, and LC/MS. Further, the inhibition effect of the varying concentration of APPH on the corrosion of low steel (LCS) in 0.5 M H₂SO₄ was investigated by weight loss and electrochemical measurements at 30 °C. The percentage inhibition efficacy of APPH increased with concentration and reached about 84% at 0.5 mM at 30 °C, also rising to 88% after 6 h of exposure. According to the polarization measurements, the investigated APPH works as a mixed-type inhibitor. Furthermore, the synergistic corrosion inhibition mechanism APPH showed that the inhibition efficiency maximizes with increasing inhibitor concentration, and the maximum value was 83% at 0.5 mM APPH. The adsorption of APPH on the LCS surface is more fitting to the Langmuir isotherm model. The free energy value (–ΔG° ads) was 33.3 kJ mol⁻¹. Quantum chemical calculation was applied to APPH and acted as excellent support for the experimental data.

One-Pot Hydrothermal Synthesized Nitrogen and Sulfur Codoped Carbon Dots for Acid Corrosion Inhibition of Q235 Steel

N and S codoped carbon dots having good water solubility have been successfully made by a novel hydrothermal method and characterized by FTIR, XPS, and TEM. The as-synthesized CDs were carbon particles rich in polar functional groups less than 10 nm in size. Electrochemical measurements, gravimetry, and surface analysis methods were utilized to examine the inhibition characteristics and adsorption mechanism of CDs on the carbon steel in acid pickling solutions. Electrochemical measurements verified that the CDs displayed adequate protection with high inhibition efficiency of 97.8%. The long-term weight-loss experiments up to 72 h further confirmed the excellent corrosion inhibition at room temperature and 313 K. The results presented are helpful for the formulation of more effective acid pickling corrosion inhibitors.

Green inhibitor of carbon steel corrosion in 1 M hydrochloric acid: Eruca sativa seed extract (experimental and theoretical studies)

The adsorption activity and inhibition effect of Eruca sativa seed extract as a green inhibitor for the dissolution of carbon steel in 1 M hydrochloric acid solution were investigated. In this study, we used a chemical technique (gravimetric method), electrochemical techniques, electrical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques, and theoretical studies. In addition to these techniques, we examined the surface morphology of the carbon steel utilizing different methods. The measurements of the polarization technique indicate that this extract acts as a mixed-type inhibitor. Thermodynamic parameters were calculated and discussed. The adsorption of Eruca sativa seed extracts on the alloy obeys the Langmuir and Henry adsorption isotherms. The extract gives an excellent inhibition efficiency 94.8% by a gravimetric method at 0.3 g L-1 from the extract. The relationship between the calculated % IE from experiments and the theoretical studies was established.

Evaluation of inhibitive corrosion potential of symmetrical hydrazine derivatives containing nitrophenyl moiety in 1M HCl for C38 steel: experimental and theoretical studies

The exploitation of cost-effective, sustainable, green and efficient compounds is a renewed science and a demanding mission for today's chemists and technologists. In this view, the inhibitive corrosion properties of some hydrazine derivatives named (1E,2E)-bis(1-(2-nitrophenyl)ethylidene)hydrazine (SSBO), (1E,2E)-bis(1-(3-nitrophenyl)ethylidene)hydrazine (SSBM) and (1E,2E)-bis(1-(4-nitrophenyl)ethylidene)hydrazine (SSBP) on the C38 steel corrosion in 1M HCl media has been evaluated by different techniques like electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy. The EIS results showed that SSBM is the greatest inhibitor (η>93%) among the three tested compounds. The SSBM gives considerable inhibition efficiency against corrosion of steel compared to the previous studies. The PDP curves indicated that the studied inhibitors were a mixed-type inhibitor with a predominantly cathodic control. Quantum calculations of some descriptors derived from the density functional theory (DFT), the transition state theory (TST), the quantum theory of atoms in molecules (QTAIM) and molecular dynamics simulation have delivered helpful information regarding electron transfer and mechanism during adsorption of inhibitors on C38 steel surface.