Post-Synthetic and In Situ Vacancy Repairing of Iron Hexacyanoferrate Toward Highly Stable Cathodes for Sodium-Ion Batteries

High Capacity and Fast Kinetics Enabled by Metal-Doping in Prussian Blue Analogue Cathodes for Sodium-Ion Batteries

Prussian blue analogues (PBAs) have gained tremendous attention as promising low-cost electrochemically-tunable electrode materials, which can accommodate large Na+ ions with attractive specific capacity and charge-discharge kinetics. However, poor cycling stability caused by lattice strain and volume change remains to be improved. Herein, metal-doping strategy has been demonstrated in FeNiHCF, Na1.40Fe0.90Ni0.10[Fe(CN)6]0.85 ⋅ 1.3H2O, delivering a capacity as high as 148 mAh g-1 at 10 mA g-1. At an exceptionally high rate of 25.6 A g-1, a reversible capacity of ~55 mAh g-1 still can be obtained with a very small capacity decay rate of 0.02 % per cycle for 1000 cycles, considered one of the best among all metal-doped PBAs. This exhibits the stabilizing effect of Ni doping which enhances structural stability and long-term cyclability. In situ synchrotron X-ray diffraction reveals an extremely small (~1 %) change in unit cell parameters. The Ni substitution is found to increase the electronic conductivity and redox activity, especially at the low-spin (LS) Fe center due to inductive effect. This larger capacity contribution from LS Fe2+C6/Fe3+C6 redox couple is responsible for stable high-rate capability of FeNiHCF. The insight gained in this work may pave the way for the design of other high-performance electrode materials for sustainable sodium-ion batteries.

Recent advances in rational design for high-performance potassium-ion batteries

The growing global energy demand necessitates the development of renewable energy solutions to mitigate greenhouse gas emissions and air pollution. To efficiently utilize renewable yet intermittent energy sources such as solar and wind power, there is a critical need for large-scale energy storage systems (EES) with high electrochemical performance. While lithium-ion batteries (LIBs) have been successfully used for EES, the surging demand and price, coupled with limited supply of crucial metals like lithium and cobalt, raised concerns about future sustainability. In this context, potassium-ion batteries (PIBs) have emerged as promising alternatives to commercial LIBs. Leveraging the low cost of potassium resources, abundant natural reserves, and the similar chemical properties of lithium and potassium, PIBs exhibit excellent potassium ion transport kinetics in electrolytes. This review starts from the fundamental principles and structural regulation of PIBs, offering a comprehensive overview of their current research status. It covers cathode materials, anode materials, electrolytes, binders, and separators, combining insights from full battery performance, degradation mechanisms, in situ/ex situ characterization, and theoretical calculations. We anticipate that this review will inspire greater interest in the development of high-efficiency PIBs and pave the way for their future commercial applications.

Cathode Electrolyte Interphase Engineering for Prussian Blue Analogues in Lithium-Ion Batteries

The increasing use of low-cost lithium iron phosphate cathodes in low-end electric vehicles has sparked interest in Prussian blue analogues (PBAs) for lithium-ion batteries. A major challenge with iron hexacyanoferrate (FeHCFe), particularly in lithium-ion systems, is its slow kinetics in organic electrolytes and valence state inactivation in aqueous ones. We have addressed these issues by developing a polymeric cathode electrolyte interphase (CEI) layer through a ring-opening reaction of ethylene carbonate triggered by OH- radicals from structural water. This facile approach considerably mitigates the sluggish electrochemical kinetics typically observed in organic electrolytes. As a result, FeHCFe has achieved a specific capacity of 125 mAh g-1 with a stable lifetime over 500 cycles, thanks to the effective activation of Fe low-spin states and the structural integrity of the CEI layers. These advancements shed light on the potential of PBAs to be viable, durable, and efficient cathode materials for commercial use.

Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries

Prussian blue analogues (PBAs) are considered to be one of the most suitable sodium storage materials, especially with the introduction of the high-entropy (HE) concept into their structure to further improve their various abilities. However, severe agglomeration of the HEPBA particles still limits the fast charging capabilities. Here, an HEPBA (Nax(FeMnCoNiCu)[Fe(CN)6]y□1-y·nH2O) with a hollow stair-stepping spherical structure has been prepared through the chemical etching process of the traditional cubic structure of HEPBA. Electrochemical characterization (sodium ion battery), kinetic analysis, and COMSOL Multiphysics simulations reveal that the nature of the high-entropy and the hollow stair-stepping spherical structure can greatly improve the diffusion behavior of Na+ ions. Moreover, the hollow structure effectively mitigates the volume change of HEPBA during SIBs operation, ultimately extending the lifespan. Consequently, the as-prepared HEPBA cathode exhibits excellent rate performance (126.5 and 76.4 mAh g-1 at 0.1 and 4.0 A g-1, respectively) and stable long-term capability (maintaining its 75.6% capacity after 1000 cycles) due to its unique structure. Furthermore, the waste of the etching process can easily be recycled to prepare more HEPBA product. This processing method holds great promise for designing nanostructures of advanced high-entropy Prussian blue analogues for sodium ion batteries.

Interior-Confined Vacancy in Potassium Manganese Hexacyanoferrate for Ultra-Stable Potassium-Ion Batteries

Metal hexacyanoferrates (HCFs) are viewed as promising cathode materials for potassium-ion batteries (PIBs) because of their high theoretical capacities and redox potentials. However, the development of an HCF cathode with high cycling stability and voltage retention is still impeded by the unavoidable Fe(CN)6 vacancies (VFeCN) and H2O in the materials. Here, a repair method is proposed that significantly reduces the VFeCN content in potassium manganese hexacyanoferrate (KMHCF) enabled by the reducibility of sodium citrate and removal of ligand H2O at high temperature (KMHCF-H). The KMHCF-H obtained at 90 °C contains only 2% VFeCN, and the VFeCN is concentrated in the lattice interior. Such an integrated Fe-CN-Mn surface structure of the KMHCF-H cathode with repaired surface VFeCN allows preferential decomposition of potassium bis(fluorosulfonyl)imide (KFSI) in the electrolyte, which constitutes a dense anion-dominated cathode electrolyte interphase (CEI) , inhibiting effectively Mn dissolution into the electrolyte. Consequently, the KMHCF-H cathode exhibits excellent cycling performance for both half-cell (95.2 % at 0.2 Ag-1 after 2000 cycles) and full-cell (99.4 % at 0.1 Ag-1 after 200 cycles). This thermal repair method enables scalable preparation of KMHCF with a low content of vacancies, holding substantial promise for practical applications of PIBs.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

In Situ Fe-Substituted Hexacyanoferrate for High-Performance Aqueous Potassium Ion Batteries

The eco-friendliness, safety, and affordability of aqueous potassium batteries (AKIBs) have made them popular for large-scale energy storage devices. However, the cycling and rate performance of research materials, particularly cobalt hexacyanoferrate, have yet to meet satisfactory standards. Herein, a room-temperature drafted K1.66 Fe0.25 Co0.75 [Fe(CN)6 ]·0.83H2 O (KFCHCF) sample is reported using an in situ substitution strategy. A higher concentration of ferrocyanide ions decreases the water content and increases the potassium content, while citric acid works as a chelating agent and is responsible for Fe-substitution in the KFCHCF sample. The resultant KFCHCF sample exhibits good rate performance, and about 97% and 90.6% of discharge capacity are conserved after 400 and 1000 cycles at 100 and 200 mA g-1 , respectively. The full cell using the KFCHCF cathode and 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide (PNTCDA) anode maintains ≈74.93% and 74.35% of discharge capacity at 200 mA g-1 and 1000 mA g-1 for 1000 and >10,000 cycles, respectively. Furthermore, ex situ characterizations demonstrate the high reversibility of K-ions and structural stability during the charge-discharge process. Such high performance is attributed to the fast K-ion migration and crystal structure stabilization caused by in situ Fe-substitution in the KFCHCF sample. Other hexacyanoferrates can be synthesized using this method and used in grid-scale storage systems.

KI-Assisted Formation of Spindle-like Prussian White Nanoparticles for High-Performance Potassium-Ion Battery Cathodes

Prussian white (PW) is considered as a promising cathode material for potassium-ion batteries (KIBs) due to its low cost and high theoretical capacity. However, the high water content and structural defects and the strict synthesis conditions of PW lead to its unsatisfactory cycling performance and low specific capacity, hindering its practical applications. Herein, a template-engaged reduction method is proposed, using MIL-88B(Fe) as a self-template and KI as the reducing agent to prepare K-rich PW with low defects and water content. Furthermore, the hierarchical porous spindle-like morphology can be inherited from the precursor, furnishing sufficient active sites and reducing the ion diffusion path. Consequently, when applied as a KIB cathode material, spindle-like PW (K1.72Fe[Fe(CN)6]0.96·0.342H2O) manifested remarkable potassium storage properties. Notably, a full cell assembled by the spindle-like PW cathode and graphite anode exhibited a large energy density of ∼216.7 Wh kg-1, demonstrating its huge potential for energy storage systems.

Isostructural Synthesis of Iron-Based Prussian Blue Analogs for Sodium-Ion Batteries

Rechargeable sodium ion batteries (SIBs) have promising applications in large-scale energy storage systems. Iron-based Prussian blue analogs (PBAs) are considered as potential cathodes owing to their rigid open framework, low-cost, and simple synthesis. However, it is still a challenge to increase the sodium content in the structure of PBAs and thus suppress the generation of defects in the structure. Herein, a series of isostructural PBAs samples are synthesized and the isostructural evolution of PBAs from cubic to monoclinic after modifying the conditions is witnessed. Accompanied by, the increased sodium content and crystallinity are discovered in PBAs structure. The as-obtained sodium iron hexacyanoferrate (Na1.75 Fe[Fe(CN)6 ]0.9743 ·2.76H2 O) exhibits high charge capacity of 150 mAh g-1 at 0.1 C (17 mA g-1 ) and excellent rate performance (74 mAh g-1 at 50 C (8500 mA g-1 )). Moreover, their highly reversible Na+ ions intercalation/de-intercalation mechanism is verified by in situ Raman and Powder X-ray diffraction (PXRD) techniques. More importantly, the Na1.75 Fe[Fe(CN)6 ]0.9743 ·2.76H2 O sample can be directly assembled in a full cell with hard carbon (HC) anode and shows excellent electrochemical performances. Finally, the relationship between PBAs structure and electrochemical performance is summarized and prospected.

Enabling long-cycling aqueous sodium-ion batteries via Mn dissolution inhibition using sodium ferrocyanide electrolyte additive

Aqueous sodium-ion batteries (AIBs) are promising candidates for large-scale energy storage due to their safe operational properties and low cost. However, AIBs have low specific energy (i.e., <80 Wh kg^-1) and limited lifespans (e.g., hundreds of cycles). Mn-Fe Prussian blue analogues are considered ideal positive electrode materials for AIBs, but they show rapid capacity decay due to Jahn-Teller distortions. To circumvent these issues, here, we propose a cation-trapping method that involves the introduction of sodium ferrocyanide (Na₄Fe(CN)₆) as a supporting salt in a highly concentrated NaClO₄-based aqueous electrolyte solution to fill the surface Mn vacancies formed in Fe-substituted Prussian blue Na_1.58Fe_0.07Mn_0.97Fe(CN)₆ · 2.65H₂O (NaFeMnF) positive electrode materials during cycling. When the engineered aqueous electrolyte solution and the NaFeMnF-based positive electrode are tested in combination with a 3, 4, 9, 10-perylenetetracarboxylic diimide-based negative electrode in a coin cell configuration, a specific energy of 94 Wh kg^-1 at 0.5 A g^-1 (specific energy based on the active material mass of both electrodes) and a specific discharge capacity retention of 73.4% after 15000 cycles at 2 A g^-1 are achieved.

Electrochemical behavior of Mg electrode in sodium salt electrolyte system

A suitable electrolyte is crucial to enhancing the electrochemical performance of magnesium (Mg) batteries. Here, the influence of Na₂SiO₃ on the electrochemical behavior of AZ31B Mg alloy in the Na₂SO₄-NaNO₃ composite electrolyte was investigated. The results revealed that the activation potential of the AZ31B Mg alloy first represented a negative shift and then a positive shift with the increase in Na₂SiO₃. The most negative activation potential (−1.51 V) and the lowest polarization (−3.20 V) were found when 6 mM of Na₂SiO₃ was added; no discharge hysteresis was observed, and the polarization resistance value (R₁) was 3,806 Ω. After 24 h immersion in the composite electrolyte with Na₂SiO₃, more and wider cracks appeared on the alloy surface, where a thick, dense film was formed, showing excellent discharge performance and corrosion resistance.