Recent Progress on Asymmetric Carbon- and Silica-Based Nanomaterials: From Synthetic Strategies to Their Applications

Stable and Durable Superhydrophobic Cotton Fabrics Prepared via a Simple 1,4-Conjugate Addition Reaction for Ultrahigh Efficient Oil-Water Separation

Superhydrophobic materials used for oil-water separation have received wide attention. However, the simple and low-cost strategy for making durable superhydrophobic materials remains a major challenge. Here, this work reports that stable and durable superhydrophobic cotton fabrics can be prepared using a simple two-step impregnation process. Silica nanoparticles are surface modified by hydrolysis condensation of 3-aminopropyltrimethoxysilane (APTMS). 1,4-conjugate addition reaction between the acrylic group of cross-linking agent pentaerythritol triacrylate (PETA) and the amino group of octadecylamine (ODA) forms a covalent cross-linked rough network structure. The long hydrophobic chain of ODA makes the cotton fabric exhibit excellent superhydrophobic properties, and the water contact angle (WCA) of the fabric surface reaches 158°. The modified cotton fabric has good physical and chemical stability, self-cleaning, and anti-fouling. At the same time, the modified fabric shows excellent oil/water separation efficiency (98.16% after 20 cycles) and ultrahigh separation flux (15413.63 L m-2 h-1) due to its superhydrophobicity, superoleophilicity, and inherent porous structure. The method provides a broad prospect in the future diversification applications of oil/water separation and oil spill cleaning.

Nano-Micron Combined Hydrogel Microspheres: Novel Answer for Minimal Invasive Biomedical Applications

Hydrogels, key in biomedical research for their hydrophilicity and versatility, have evolved with hydrogel microspheres (HMs) of micron-scale dimensions, enhancing their role in minimally invasive therapeutic delivery, tissue repair, and regeneration. The recent emergence of nanomaterials has ushered in a revolutionary transformation in the biomedical field, which demonstrates tremendous potential in targeted therapies, biological imaging, and disease diagnostics. Consequently, the integration of advanced nanotechnology promises to trigger a new revolution in the realm of hydrogels. HMs loaded with nanomaterials combine the advantages of both hydrogels and nanomaterials, which enables multifaceted functionalities such as efficient drug delivery, sustained release, targeted therapy, biological lubrication, biochemical detection, medical imaging, biosensing monitoring, and micro-robotics. Here, this review comprehensively expounds upon commonly used nanomaterials and their classifications. Then, it provides comprehensive insights into the raw materials and preparation methods of HMs. Besides, the common strategies employed to achieve nano-micron combinations are summarized, and the latest applications of these advanced nano-micron combined HMs in the biomedical field are elucidated. Finally, valuable insights into the future design and development of nano-micron combined HMs are provided.

Physicochemical and Adsorption Characterization of Char Derived from Resorcinol-Formaldehyde Resin Modified with Metal Oxide/Silica Nanocomposites

A series of metal- and silica-containing carbon-based nanocomposites were synthesized by pyrolysis of a resorcinol-formaldehyde polymer modified with metal oxide/silica nanocomposites (MxOy/SiO2, where M = Mg, Mn, Ni, Cu and Zn) via the thermal oxidative destruction of metal acetates adsorbed on highly dispersed silica (A380). The concentration of metals was 3.0 mmol/g SiO2. The phase composition and morphological, structural and textural properties of the carbon materials were analyzed by X-ray diffraction, SEM, Raman spectroscopy and low-temperature N2 adsorption. Thermal decomposition under a nitrogen atmosphere and in air was analyzed using TG-FTIR and TG-DTG-DSC techniques to determine the influence of the filler on the decomposition process. The synthesized composites show mesoporous structures with high porosity and narrow pore size distributions. It could be shown that the textural properties and the final composition of the nanocomposites depend on the metal oxide fillers of the precursors. The data obtained show that nickel and copper promote the degree of graphitization and a structural order with the highest porosity and largest specific surface area of the hybrid composites. The good adsorption properties of the obtained materials were shown for the recovery of p-chlorophenol and p-nitrophenol from aqueous solutions.

Mesoporous carbon hemispheres integrated with Fe-Gd nanoparticles for potential MR/PA imaging-guided photothermal therapy

Asymmetric carbon has emerged as an important material to enrich morphologies as well as enhance functions for bioapplications. Here, asymmetric mesoporous carbon hemispheres (CHS) integrated with γ-Fe2O3 and GdPO4 (Fe-Gd) nanoparticles are proposed and prepared for potential imaging-guided photothermal therapy (PTT). Interestingly, Fe-Gd/CHS contributes to an almost 1.5 times enhancement in light harvesting and photothermal conversion efficiency as compared with its corresponding spherical analogue. The possible underlying mechanism is discussed in view of the unique asymmetric structure-featured carbon. Further identification of the inherited photoacoustic (PA) and magnetic resonance (MR) imaging properties leads to the consequent in vivo evaluation of its imaging and PTT performances, which demonstrates its capability as a function-integrated system for potential theranostics.

Photothermal-driven micro/nanomotors: From structural design to potential applications

Micro/nanomotors (MNMs) that accomplish autonomous movement by transforming external energy into mechanical work are attractive cargo delivery vehicles. Among various propulsion mechanisms of MNMs, photothermal propulsion has gained considerable attention because of their unique advantages, such as remote, flexible, accurate, biocompatible, short response time, etc. Moreover, besides as a propulsion source, the light has been extensively investigated as an excitation source in bioimaging, photothermal therapy (PTT), photodynamic therapy (PDT) and so on. Furthermore, the geometric topology and morphology of MNMs have a tremendous impact on improving their performance in motion behavior under NIR light propulsion, environmental suitability and functional versatility. Hence, this review article provides a comprehensive overview of structural design principles and construction strategies of photothermal-driven MNMs, and their emerging nanobiomedical applications. Finally, we further provide an outlook towards prospects and challenges during the development of photothermal-driven MNMs in the future. STATEMENT OF SIGNIFICANCE: Photothermal-driven micro/nanomotors (MNMs) that are regarded as functional cargo delivery tools have gained considerable attention because of unique advantages in propulsion mechanisms, such as remote, flexible, accurate and fully biocompatible light manipulation and extremely short light response time. The geometric topology and morphology of MNMs have a tremendous impact on improving their performance in motion behavior under NIR light propulsion, environmental suitability and functional versatility of MNMs. There are no reports about the review focusing on photothermal-driven MNMs up to now. Herein, we systematically review the latest progress of photothermal-driven MNMs including design principle, fabrication strategy of various MNMs with different structures and nanobiomedical applications. Moreover, the summary and outlook on the development prospects and challenges of photothermal-driven MNMs are proposed, hoping to provide new ideas for the future design of photothermal-driven MNMs with efficient propulsion, multiple functions and high biocompatibility.

Intelligent Jellyfish-type Janus Nanoreactor Targeting Synergistic Treatment of Bacterial Infections

Infections caused by multidrug-resistant bacteria continue to pose a serious threat to human health, and therefore it is important to explore the availability of antimicrobial drugs and modalities. Herein, jellyfish-type irregular mesoporous iron oxide nanoreactors containing ciprofloxacin, Janus Fe₃O₄@mSiO₂@Cip nanoparticles (JFmS@Cip NPs), were developed for pH-responsive synergistic antimicrobial therapy in a microacidic environment. Compared with the use of symmetric nanocarriers, the asymmetric decoration on both sides of the particles allows different components to act on bacteria, Fe₃O₄ NPs have good magnetic and peroxidase-like catalytic activity, and the antibiotic ciprofloxacin can kill bacteria efficiently. Notably, due to the synergistic effect between different components of Janus particles, in vitro antibacterial experiments showed that JFmS@Cip NPs can kill bacteria efficiently at low concentrations, reaching an antibacterial rate of 99.6%. JFmS@Cip NPs combine multiple antibacterial properties that can be used to improve the therapeutic efficacy of current nanomedicines against drug-resistant bacteria.

Recent Advances in Nano-Enabled Seed Treatment Strategies for Sustainable Agriculture: Challenges, Risk Assessment, and Future Perspectives

Agro seeds are vulnerable to environmental stressors, adversely affecting seed vigor, crop growth, and crop productivity. Different agrochemical-based seed treatments enhance seed germination, but they can also cause damage to the environment; therefore, sustainable technologies such as nano-based agrochemicals are urgently needed. Nanoagrochemicals can reduce the dose-dependent toxicity of seed treatment, thereby improving seed viability and ensuring the controlled release of nanoagrochemical active ingredients However, the applications of nanoagrochemicals to plants in the field raise concerns about nanomaterial safety, exposure levels, and toxicological implications to the environment and human health. In the present comprehensive review, the development, scope, challenges, and risk assessments of nanoagrochemicals on seed treatment are discussed. Moreover, the implementation obstacles for nanoagrochemicals use in seed treatments, their commercialization potential, and the need for policy regulations to assess possible risks are also discussed. Based on our knowledge, this is the first time that we have presented legendary literature to readers in order to help them gain a deeper understanding of upcoming nanotechnologies that may enable the development of future generation seed treatment agrochemical formulations, their scope, and potential risks associated with seed treatment.

A Review of In-Situ Techniques for Probing Active Sites and Mechanisms of Electrocatalytic Oxygen Reduction Reactions

Electrocatalytic oxygen reduction reaction (ORR) is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal-O2/air batteries, etc. However, the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process, and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction. This makes them difficult to be accurately captured, making the identification of ORR active sites and the elucidation of ORR mechanisms difficult. Thus, it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR. This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts. Specifically, the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized, such as phase, valence, electronic transfer, coordination, and spin states varies. In-situ revelation of intermediate adsorption/desorption behavior, and the real-time monitoring of the product nucleation, growth, and reconstruction evolution are equally emphasized in the discussion. Other interference factors, as well as in-situ signal assignment with the aid of theoretical calculations, are also covered. Finally, some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.

Synergistically Enhancing the Therapeutic Effect on Cancer, via Asymmetric Bioinspired Materials

The undesirable side effects of conventional chemotherapy are one of the major problems associated with cancer treatment. Recently, with the development of novel nanomaterials, tumor-targeted therapies have been invented in order to achieve more specific cancer treatment with reduced unfavorable side effects of chemotherapic agents on human cells. However, the clinical application of nanomedicines has some shortages, such as the reduced ability to cross biological barriers and undesirable side effects in normal cells. In this order, bioinspired materials are developed to minimize the related side effects due to their excellent biocompatibility and higher accumulation therapies. As bioinspired and biomimetic materials are mainly composed of a nanometric functional agent and a biologic component, they can possess both the physicochemical properties of nanomaterials and the advantages of biologic agents, such as prolonged circulation time, enhanced biocompatibility, immune modulation, and specific targeting for cancerous cells. Among the nanomaterials, asymmetric nanomaterials have gained attention as they provide a larger surface area with more active functional sites compared to symmetric nanomaterials. Additionally, the asymmetric nanomaterials are able to function as two or more distinct components due to their asymmetric structure. The mentioned properties result in unique physiochemical properties of asymmetric nanomaterials, which makes them desirable materials for anti-cancer drug delivery systems or cancer bio-imaging systems. In this review, we discuss the use of bioinspired and biomimetic materials in the treatment of cancer, with a special focus on asymmetric nanoparticle anti-cancer agents.

NIR light-propelled bullet-shaped carbon hollow nanomotors with controllable shell thickness for the enhanced dye removal

Materials with asymmetric nanostructures have attracted tremendous research attention due to their unique structural characteristics, excellent physicochemical properties, and promising prospects. However, it is still difficult to design and fabricate bullet-shaped nanostructure due to its structural complexity. Herein, for the first time, we successfully constructed NIR light-propelled bullet-shaped hollow carbon nanomotors (BHCNs) with an open mouth on the bottom of nano-bullet for the enhanced dye removal, by employing bullet-shaped silica nanoparticles (B-SiO₂ NPs) as a hard template. BHCNs were formed by the growth of polydopamine (PDA) layer on the heterogeneous surface of B-SiO₂ NPs, followed by the carbonization of PDA and subsequent selective etching of SiO₂. The shell thickness of BHCNs was able to be facilely controlled from ≈ 14 to 30 nm by tuning the added amount of dopamine. The combination of streamlined bullet-shaped nanostructure with good photothermal conversion efficiency of carbon materials facilitated the generation of asymmetric thermal gradient field around itself, thus driving the motion of BHCNs by self-thermophoresis. Noteworthily, the diffusion coefficient (De) and velocity of BCHNs with shell thickness of 15 nm (BHCNs-15) reached to 43.8 μm⋅cm^-2 and 11.4 μm⋅s^-1, respectively, under the illumination of 808 nm NIR laser with the power density of 1.5 W⋅cm^-2. The NIR laser propulsion caused BCHNs-15 to enhance the removal efficiency (53.4% vs. 25.4%) of methylene blue (MB) as a typical dye because the faster velocity could produce the higher micromixing role between carbon adsorbent and MB. Such a smart design of the streamlined nanomotors may provide a promising potential in environmental treatment, biomedical and biosensing applications.

Pickering emulsions as an alternative to traditional polymers: trends and applications

Pickering emulsions have gained increasing interest because of their unique features, including easy preparation and stability. In contrast to classical emulsions, in Pickering emulsions, the stabilisers are solid micro/nanoparticles that accumulate on the surfaces of liquid phases. In addition to their stability, Pickering emulsions are less toxic and responsive to external stimuli, which make them versatile material that can be flexibly designed for specific applications, e.g., catalysis, pharmaceuticals and new materials. The potential toxicity and adverse impact on the environment of classic emulsions is related to the extractable nature of the water emulsifier. The impacts of some emulsifiers are related to not only their chemical natures but also their stabilities; after base or acid hydrolysis, some emulsifiers can be turned into sulphates and fatty alcohols, which are dangerous to aquatic life. In this paper, recent research on Pickering emulsion preparations is reviewed, with a focus on styrene as one of the main emulsion components. Moreover, the effects of the particle type and morphology and the critical parameters of the emulsion production process on emulsion properties and applications are discussed. Furthermore, the current and prospective applications of Pickering emulsion, such as in lithium-ion batteries and new vaccines, are presented.

Tailoring head-tail mesoporous silica nanoparticles for enhanced gene transfection

Plasmid DNA (pDNA) delivery has attracted extensive research interest due to its great potential in gene therapy. The design of efficient nano-vectors to promote cellular delivery and transfection of gene molecules is the key to success. Compared to conventional nanocarriers with spherical geometry, asymmetric nanoparticles have been well documented showing enhanced cellular uptake and drug delivery capability. However, the impact of asymmetric nanostructures on pDNA binding and following intracellular delivery performance has been less reported. Herein, asymmetric head-tail mesoporous silica nanoparticles (HTMSNs) with tailored tail lengths were synthesized and employed as nano-vectors for pDNA delivery. The nanostructures of HTMSNs were carefully characterized by electron tomography. The pDNA binding, cellular uptake and gene transfection capabilities of engineered asymmetric nanoparticles were compared with symmetric dendritic mesoporous silica nanoparticles (DMSNs). The results showed that the asymmetric morphology of nanoparticles promoted pDNA binding and cell internalization, where HTMSNs-66 with a specific tail length of 66 nm achieved the highest transfection efficiency. This study reveals the impact of asymmetric nanostructure on DNA interaction, and provides guidance in future designs of non-viral nano-vectors for efficient gene delivery.

Ratiometric fluorescence enzyme-linked immunosorbent assay based on carbon dots@SiO2@CdTe quantum dots with dual functionalities for alpha-fetoprotein

Molecular tags such as fluorophores are increasingly being replaced with nanoparticles thanks to their superior optical properties, substantial chemical stability, and stability against photobleaching. Herein, we innovatively constructed a new ratiometric fluorescence enzyme-linked immunosorbent assay (RF-ELISA) for the screening of alpha-fetoprotein (AFP) in early hepatocellular carcinoma in vitro diagnostics using carbon dots@SiO₂@CdTe quantum dots (CDs@SiO₂@CdTe QDs). Carbon dots with blue fluorescence were initially encapsulated into SiO₂ nanospheres through the typical Stöber method. Thereafter, CdTe QDs with red fluorescence were modified onto the surface of CDs@SiO₂ nanospheres. Dual-emission nanotags with blue and red fluorescent signals were utilized to design a RF-ELISA method for the determination of AFP on the anti-AFP capture antibody-coated microplate using glucose oxidase (GOx)-labeled anti-AFP secondary antibody. After the formation of the sandwiched immunocomplex, GOx catalyzed glucose to generate hydrogen peroxide (H₂O₂), which could quench the red fluorescence of CdTe QDs on the surface of nanotags. Meanwhile, the encapsulated carbon dots in the nanotags could still maintain the initial blue fluorescence intensity. The ratio between red fluorescence intensity and blue-emission intensity could be used for the quantitative monitoring of AFP concentration under optimum conditions. The experimental results indicated that CDs@SiO₂@CdTe QDs-based RF-ELISA could exhibit a good fluorescence signal with a dynamic linear range of 0.05-60 ng mL^-1 at a low detection limit of 8.7 pg mL^-1. Moreover, the fluorescence color of the solution including CDs@SiO₂@CdTe QDs changed from pink to purple to blue with the increasing AFP level when viewed by the naked eye. Good reproducibility, high specificity, and acceptable stability were achieved for the analysis of target AFP. Importantly, the accuracy of ratiometric fluorescence immunoassay was evaluated to determine human serum samples, giving well-matched results relative to commercially usable human AFP ELISA method.