An Electrochromic Nickel Phosphate Film for Large-Area Smart Window with Ultra-Large Optical Modulation

Recent advances in tungsten oxide-based chromogenic materials: photochromism, electrochromism, and gasochromism

As n-type and wide-bandgap semiconductor materials which are widely found in nature, tungsten oxides (WOx) have attracted extensive attention because of their rich phase structures and unique sub-stoichiometric properties. Tungsten oxides have a good chromogenic response to optical, electrical, and gaseous stimuli, in which their phase changes with the change of temperature and ionic embeddedness, accompanied by significant changes in their optical properties. In addition, due to the presence of oxygen defects, the conductivity and adsorption capacity of tungsten oxides for surface substances are enhanced. These properties endow tungsten oxides with promising application potential in the optical and electronic device areas. This paper reviews the structural and optoelectrical properties of tungsten oxide-based chromogenic materials. Then we focus on the working mechanisms, performance indexes, and preparation methods of tungsten oxides in the field of intelligent chromogenic technology, including photochromism, electrochromism, and gasochromism of tungsten oxide-based chromogenic materials. Finally, a conclusion and outlook are provided, which may help to further advance the application of tungsten oxides in the field of smart chromogenic changes.

Machine Learning-Guided Cycle Life Prediction for Electrochromic Devices Based on Deuterium and Water Mixing Solvent

Electrochromic devices have demonstrated considerable potential in a range of applications, including smart windows and automotive rearview mirrors. However, traditional cycle life testing methods are time-consuming and require significant resources to process a substantial amount of generated data, which presents a significant challenge and remains an urgent issue to be addressed. To address this challenge, we proposed the use of Long Short-Term Memory (LSTM) networks to construct a prediction model of the cycle life of electrochromic devices and introduced an interpretable analysis method to further analyze the model's predictive capabilities. The original dataset used for modeling was derived from preliminary experiments conducted under 1000 cycles of six devices prepared with varying mixing ratios of heavy water (D2O). Furthermore, validation experiments confirmed the feasibility of the D2O mixing strategy, with 83% of the devices exhibiting a high initial transmittance modulation amplitude (ΔT = 43.95%), a rapid response time (tc = 7 s and tb = 8 s), and excellent cyclic stability (ΔT = 44.92% after 1000 cycles). This study is the first to use machine learning techniques to predict the cycle life of electrochromic devices while proposing performance enhancement and experimental time savings for inorganic all-liquid electrochromic devices.

Design and Implementation of Electrochromic Smart Windows with Self-Driven Thermoelectric Power Generation

Electrochromic smart windows can achieve controllable modulation of color and transmittance under an external electric field with active light and thermal control capabilities, which helps reduce energy consumption caused by building cooling and heating. However, electrochromic smart windows often rely on external power circuits, which greatly affects the independence and portability of smart windows. Based on this, an electrochromic smart window driven by temperature-difference power generation was designed and implemented. This smart window provides automatic and manual control of the reversible cycle of electrochromic glass from light blue to dark blue according to user requirements and changes in the surrounding environment, achieving adaptive adjustment of visual comfort and reducing energy consumption. The infrared radiation rejection (from 780 to 2500 nm) of the electrochromic smart window is as high as 77.3%, and its transmittance (from 380 to 780 nm) fluctuates between 39.2% and 56.4% with changes in working state. Furthermore, the temperature in the indoor simulation device with electrochromic glass as the window was 15 °C lower than that with ordinary glass as the window after heating with a 250 W Philips infrared lamp for ten minutes. After 2000 cycles of testing, the performance of the smart window was basically maintained at its initial values, and it has broad application prospects in buildings, vehicles, and high-speed rail systems.

A Reversible MnO2 Deposition-Enabled Multicolor Electrochromic Device with Efficient Tunability of Ultraviolet-Visible Light

Electrochromic technology offers exciting opportunities for smart applications such as energy-saving and interactive systems. However, achieving dual-band regulation together with the multicolor function is still an unmet challenge for electrochromic devices. Herein, an ingenious electrochromic strategy based on reversible manganese oxide (MnO2) electrodeposition, different from traditional ion intercalation/deintercalation-type electrochromic materials is proposed. Such a deposition/dissolution-based MnO2 brings an intriguing electrochromic feature of dual-band regulation for the ultraviolet (UV) and visible lights with high optical modulation (93.2% and 93.6% at 400 and 550 nm, respectively) and remarkable optical memory. Moreover, a demonstrative smart window assembled by MnO2 and Cu electrodes delivers the electrochromic properties of effective dual-band regulation accompanied by multicolor changes (transparent, yellow, and brown). The robust redox deposition/dissolution process endows the MnO2-based electrochromic device with excellent rate capability and an areal capacity of 570 mAh m-2 at 0.1 mA cm-2. It is believed that the metal oxide-based reversible electrodeposition strategy would be an attractive and promising electrochromic technology and provide a train of thought for the development of multifunctional electrochromic devices and applications.

Approach to Significantly Enhancing the Electrochromic Performance of PANi by In Situ Electrodeposition of the PANi@MXene Composite Film

Electrochromic materials (ECMs) are capable of reversibly adjusting their transmittance or reflectance properties in response to changes in the external biasing voltages. In this study, we enhanced the electrochromic and electrochemical properties of polyaniline (PANi) effectively through the incorporation of MXene Ti2CTx using an in situ composite strategy. This improvement in the electrochromic and electrochemical properties observed can be attributed to the intermolecular forces between the aniline group of PANi and the terminal groups of MXene Ti2CTx sheets. The presence of hydrogen bonds between the PANi monomers and the MXene sheets was confirmed through theoretical calculations and photoluminescence results, which effectively improved the composite interfaces. Additionally, the PANi@MXene composite films were successfully prepared through a simple one-step in situ polymerization process, as verified by SEM and XPS characterization. The electrochemical studies revealed enhanced electronic conductivity, a high ion diffusion coefficient, and a narrow energy redox gap, all contributing to the excellent electrochemical properties observed. Overall, our results demonstrate that the MXene Ti2CTx composition effectively enhances the electrochromic performance of PANi. The PANi@MXene composite films exhibited a high optical modulation range, rapid switching response time, good thermal radiation regulation, and excellent operational stability. This composite strategy significantly improves the performance and practical applicability of ECMs.

Surface modification of rare earth Sm-doped WO3 films through polydopamine for enhanced electrochromic energy storage performance

Electrochromic materials (ECMs) could exhibit reversible color changes upon application of the external electric field, which exhibits huge application prospects in smart windows, energy storage devices, and displays. For the practical application of ECMs, the fast response speed and long cyclic stability are urgent. In this work, the nanoporous Sm-doped WO3 (WSm) films were constructed using hydrothermal technology, then polydopamine (PDA) was modified on the surface of WSm film to obtain the WSm/Px (x = 0.25, 0.5, 1.0, and 2.0) hybrid films. WSm/Px hybrid films displayed high optical contrast and large areal capacitance. In addition, in comparison with WSm film, the WSm/Px hybrid films exhibited faster response speed and better cyclic stability because PDA film enhanced the interface ion transport ability and electrochemical structural stability of the nanoporous WSm film. Notably, the WSm/P1.0 hybrid film displayed the colored/bleached times of 7.4/2.9 s, retained 90.2% of the primitive optical contrast (68.5%) after 5000 electrochromic cycles. Furthermore, the areal capacitance of WSm film could be increased by 224% through the modification of the PDA. Therefore, WSm/Px hybrid films are great prospects for electrochromic energy-saving and storage windows.

Temperature Sensors Integrated with an Electrochromic Readout toward Visual Detection

Temperature sensors have attracted great attention for personal health care and disease diagnosis in recent years. However, it is still a great challenge to fabricate reliable and highly sensitive temperature sensors that can convert physiological signals into easily readable signals in a convenient way. Herein, an integrated smart temperature sensor system based on a traditional temperature sensor and electrochromic display is proposed for real-time visual detection of temperature. Significantly, a voltage-regulated electrochromic device (ECD) based on tungsten oxide (WO3) and polyaniline (PANI) as the real-time visualization window was integrated into the platform to provide feedback on the temperature change. The ECD would change its color from green to blue based on the electrical signal of the temperature sensor, resulting in a visualized readout that can be monitored through our naked eye. Additionally, the smart temperature sensor system possesses an extremely durable property and cycle stability, remaining around 90% of the initial value even after 15,000 s continuous cycle. Thus, the novel design and low power consumption advantages make it a good candidate to pave the way for developing interactive wearable electronics and intelligent robots as real-time temperature feedback systems.

Poly (Aryl Amino Ketone/Sulfones) with Obvious Electrochromic Effect Prepared by One-Step Low-Cost and Facile Synthesis

High-performance donor-acceptor (D-A) polymers, as an important class of electrochromic (EC) materials, have attracted extensive attention. In this paper, a series of novel poly (aryl amino ketone) (PAAK) and poly (aryl amino sulfone) (PAAS) type high-performance polymers (HPP) with electrochromism were prepared by a simple C-N coupling reaction and were coated on an indium tin oxide (ITO) substrate as EC films. All four polymers were prepared by a nucleophilic substitution reaction using commercially purchased amine monomers with difluoride sulfone/ketone using potassium carbonate as a catalyst. A series of tests were performed to compare and analyze the effects of the different electron-withdrawing abilities of sulfone and carbonyl groups, and the different conjugation lengths of these two TPA structures were connected to the EC properties of the polymer. The different phenyl or biphenyl of the two TPA structures mainly affected the oxidation potential of the polymer, while the sulfone group and the carbonyl group, with a different electron absorption ability, had a greater influence on the energy band and cyclic stability. The optical contrast of PAAS-BT at 850 nm was up to 58% and maintained 450 cycles, indicating that this series of materials had a broad application prospect waiting for further research. In addition to the performance, the raw materials used in this work could be directly and commercially purchased for a low price; the two aniline monomers were priced at about $0.43 /g and $0.15 /g, respectively. This method significantly reduces the cost and provides a new idea for subsequent large-scale production and practical applications.