Heteroatom-Induced Accelerated Kinetics on Nickel Selenide for Highly Efficient Hydrazine-Assisted Water Splitting and Zn-Hydrazine Battery

Ruthenium Nanoclusters and Single Atoms on α-MoC/N-Doped Carbon Achieves Low-Input/Input-Free Hydrogen Evolution via Decoupled/Coupled Hydrazine Oxidation

The hydrazine oxidation-assisted H2 evolution method promises low-input and input-free hydrogen production. However, developing high-performance catalysts for hydrazine oxidation (HzOR) and hydrogen evolution (HER) is challenging. Here, we introduce a bifunctional electrocatalyst α-MoC/N-C/RuNSA, merging ruthenium (Ru) nanoclusters (NCs) and single atoms (SA) into cubic α-MoC nanoparticles-decorated N-doped carbon (α-MoC/N-C) nanowires, through electrodeposition. The composite showcases exceptional activity for both HzOR and HER, requiring -80 mV and -9 mV respectively to reach 10 mA cm-2. Theoretical and experimental insights confirm the importance of two Ru species for bifunctionality: NCs enhance the conductivity, and its coexistence with SA balances the H ad/desorption for HER and facilitates the initial dehydrogenation during the HzOR. In the overall hydrazine splitting (OHzS) system, α-MoC/N-C/RuNSA excels as both anode and cathode materials, achieving 10 mA cm-2 at just 64 mV. The zinc hydrazine (Zn-Hz) battery assembled with α-MoC/N-C/RuNSA cathode and Zn foil anode can exhibit 97.3 % energy efficiency, as well as temporary separation of hydrogen gas during the discharge process. Therefore, integrating Zn-Hz with OHzS system enables self-powered H2 evolution, even in hydrazine sewage. Overall, the amalgamation of NCs with SA achieves diverse catalytic activities for yielding multifold hydrogen gas through advanced cell-integrated-electrolyzer system.

Taking Advantage of Potential Coincidence Region: Insights into Gas Production Behavior in Advanced Self-Activated Hydrazine-Assisted Alkaline Seawater Electrolysis

Water electrolysis assisted by hydrazine has emerged as a prospective energy conversion method for achieving efficient hydrogen generation. Due to the potential coincidence region (PCR) between the hydrogen evolution reaction (HER) and the electro-oxidation of hydrazine, the hydrazine oxidation reaction (HzOR) offers distinct advantages in terms of strategy amalgamation, device architecture, and the broadening of application horizons. Herein, we report a bifunctional electrocatalyst of interfacial heterogeneous Fe2P/Co2P microspheres supported on Ni foam (FeCoP/NF). Benefiting from the strong interfacial coupling effect between Fe2P and Co2P and the three-dimensional microsphere structure, FeCoP/NF exhibits outstanding bifunctional electrocatalytic performance, achieving 10 mA cm-2 with low overpotentials of 10 and 203 mV for HER and HzOR, respectively. Utilizing FeCoP/NF for both electrodes in HzOR-assisted water electrolysis results in significantly reduced potentials of 820 mV for 1 A cm-2 in contrast to the electro-oxidation of alternative chemical substrates. The presence of a potential coincidence region makes the application of self-activated seawater electrolysis realistic. The gas production behavior at different current densities in this interesting hydrogen production system is discussed, and some rules that are distinguished from conventional water electrolysis are summarized. Furthermore, a new self-powered hydrogen production system with a direct hydrazine fuel cell, rechargeable Zn-hydrazine battery, and hydrazine-assisted seawater electrolysis is proposed, emphasizing the distinct benefits of HzOR and its potential role in electrochemical energy conversion technologies powered by renewable sources.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

Highly bifunctional Rh2P on N,P-codoped carbon for hydrazine oxidation assisted energy-saving hydrogen production

Highly pure Rh2P nanoparticles on N,P-codoped carbon were synthesized by a simple "mix-and-pyrolyze" method using one kind of low-cost nucleotide as the carbon, nitrogen and phosphorus source, which exhibits excellent bifunctional activity for the hydrogen reduction and hydrazine oxidation reactions, achieving energy-efficient hydrogen production.

In Situ Electrochemical Rapid Induction of Highly Active γ-NiOOH Species for Industrial Anion Exchange Membrane Water Electrolyzer

Limited by the strong oxidation environment and sluggish reconstruction process in oxygen evolution reaction (OER), designing rapid self-reconstruction with high activity and stability electrocatalysts is crucial to promoting anion exchange membrane (AEM) water electrolyzer. Herein, trace Fe/S-modified Ni oxyhydroxide (Fe/S-NiOOH/NF) nanowires are constructed via a simple in situ electrochemical oxidation strategy based on precipitation-dissolution equilibrium. In situ characterization techniques reveal that the successful introduction of Fe and S leads to lattice disorder and boosts favorable hydroxyl capture, accelerating the formation of highly active γ-NiOOH. The Density Functional Theory (DFT) calculations have also verified that the incorporation of Fe and S optimizes the electrons redistribution and the d-band center, decreasing the energy barrier of the rate-determining step (*O→*OOH). Benefited from the unique electronic structure and intermediate adsorption, the Fe/S-NiOOH/NF catalyst only requires the overpotential of 345 mV to reach the industrial current density of 1000 mA cm-2 for 120 h. Meanwhile, assembled AEM water electrolyzer (Fe/S-NiOOH//Pt/C-60 °C) can deliver 1000 mA cm-2 at a cell voltage of 2.24 V, operating at the average energy efficiency of 71% for 100 h. In summary, this work presents a rapid self-reconstruction strategy for high-performance AEM electrocatalysts for future hydrogen economy.

Highly stable and reversible Zn anodes enabled by an electrolyte additive of sucrose

Aqueous zinc-ion batteries (ZIBs) are one of the most promising candidates for electric energy storage devices due to their merits of low cost and high safety. However, the notorious side reactions and dendrite formation on zinc anodes impede the commercialization of ZIBs. In this work, a cheap and edible electrolyte additive sucrose is applied to address the above issues. Sucrose with hydroxyl groups can react as zincophilic sites to adsorb Zn2+. As verified by Raman and FT-IR spectroscopy, the solvation structure of Zn2+ and the hydrogen bonds can be regulated by the sucrose molecule. The weakened solvated structure of Zn2+ and lowered coupling degree between Zn2+ and SO42- can inhibit the hydrogen evolution reaction (HER) and the generation of the sulfate by-product. Furthermore, a solid electrolyte interphase (SEI)-like ion buffer layer is formed because of the preferentially adsorbed sucrose, which can increase the nucleation overpotential and equalize the ion distribution. The enriched Zn nucleation sites and inhibited 2D diffusion of Zn2+ resulting from the sucrose additive enable uniform Zn deposition. Thus, improved performances of symmetric Zn||Zn, asymmetric Zn||Cu and Zn||VO2 cells are realized. The Zn||Zn cell exhibits a highly reversible cycling performance for 1200 h and 400 h at 5 mA cm-2/1 mA h cm-2 and 10 mA cm-2/5 mA h cm-2, respectively. This work provides a readily available and edible additive to improve the performance of ZIBs.

Spindle Nanorods of CeO2 and NiS Heterointerface Coated by the NC Layer: A High-Performance Bifunctional Electrocatalyst for Water Splitting

Currently, nickel sulfides are widely employed in the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), thanks to the narrow electronegativity difference of only 0.67 eV between nickel and sulfur. Among them, NiS stands out in terms of the OER performance; however, its HER performance and stability remain somewhat inadequate. The construction of heterogeneous interfaces can efficiently improve the HER performance and regulate the electronic structure of the NiS catalyst. CeO2 has been discovered to possess exceptional electronic modulation capabilities, which may lead to the effective enhancement of both HER and OER of the NiS catalyst. As a result, a nitrogen-doped carbon-coated CeO2-NiS heterogeneous interface catalyst (NC/NiS-CeO2) is designed as a bifunctional electrocatalyst for HER and OER with high performance. The NC/NiS-CeO2 catalyst demonstrates excellent HER (47 mV at 10 mA cm-2) and OER (92 mV at 10 mA cm-2) performances in a 1 M KOH alkaline solution. Characterization analysis reveals that the coupling of the heterostructure interface, which consists of CeO2 and NiS, significantly enhances electron conduction, the synergistic effect, and the electrocatalytic activity of the electrode. This study demonstrates that the HER and OER activity can be effectively improved by constructing a rational heterogeneous interface.

Coupling of Adhesion and Anti-Freezing Properties in Hydrogel Electrolytes for Low-Temperature Aqueous-Based Hybrid Capacitors

Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety, mechanical and thermal stability and easy-to-direct stacking. Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness, high conductivity and intrinsic flexibility. However, the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors. Here, we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance. The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode. Meanwhile, the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures. More significantly, the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance, delivering high-energy density of 39 Wh kg-1 at -60 °C with capacity retention of 98.7% over 10,000 cycles. With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte, the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at -60 °C. This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.

Adsorption Site Regulations of [W-O]-Doped CoP Boosting the Hydrazine Oxidation-Coupled Hydrogen Evolution at Elevated Current Density

Hydrazine oxidation reaction (HzOR) assisted hydrogen evolution reaction (HER) offers a feasible path for low power consumption to hydrogen production. Unfortunately however, the total electrooxidation of hydrazine in anode and the dissociation kinetics of water in cathode are critically depend on the interaction between the reaction intermediates and surface of catalysts, which are still challenging due to the totally different catalytic mechanisms. Herein, the [W-O] group with strong adsorption capacity is introduced into CoP nanoflakes to fabricate bifunctional catalyst, which possesses excellent catalytic performances towards both HER (185.60 mV at 1000 mA cm-2) and HzOR (78.99 mV at 10,00 mA cm-2) with the overall electrolyzer potential of 1.634 V lower than that of the water splitting system at 100 mA cm-2. The introduction of [W-O] groups, working as the adsorption sites for H2O dissociation and N2H4 dehydrogenation, leads to the formation of porous structure on CoP nanoflakes and regulates the electronic structure of Co through the linked O in [W-O] group as well, resultantly boosting the hydrogen production and HzOR. Moreover, a proof-of-concept direct hydrazine fuel cell-powered H2 production system has been assembled, realizing H2 evolution at a rate of 3.53 mmol cm-2 h-1 at room temperature without external electricity supply.

Phosphorus-induced activation of Ir metallene for efficient acidic overall water electrolysis

In this work, we synthesize P-doped Ir metallene (P-Ir metallene) with rich defects as a highly active bifunctional catalyst towards the hydrogen evolution reaction and oxygen evolution reaction, requiring overpotentials of 28 and 279 mV to drive 10 mA cm-2 in 0.5 M H2SO4, respectively. Moreover, P-Ir metallene exhibits excellent electrocatalytic performance for overall water splitting, producing hydrogen at 10 mA cm-2 with a low operation voltage of 1.508 V. This study proposes the incorporation of phosphorus into noble metals to improve the electrocatalytic performance for water splitting.