Advances in Mn-Based Electrode Materials for Aqueous Sodium-Ion Batteries

Cu1.4Mn1.6O4 as a bifunctional transducer for potentiometric Cu2+ solid-contact ion-selective electrode

Current potentiometric Cu2+ sensors mostly rely on polymer-membrane-based solid-contact ion-selective electrodes (SC-ISEs) that constitute ion-selective membranes (ISM) and solid contact (SC) for respective ion recognition and ion-to-electron transduction. Herein, we report an ISM-free Cu2+-SC-ISE based on Cu-Mn oxide (Cu1.4Mn1.6O4) as a bifunctional SC layer. The starting point is simplifying complex multi-interfaces for Cu2+-SC-ISEs. Specifically, ion recognition and signal transduction have been achieved synchronously by an ion-coupled-electron transfer of crystal ion transport and electron transfer of Mn4+/3+ in Cu1.4Mn1.6O4. The proposed Cu1.4Mn1.6O4 electrode discloses comparable sensitivity, response time, high selectivity and stability compared with present ISM-based potentiometric Cu2+ sensors. In addition, the Cu1.4Mn1.6O4 electrode also exhibits near Nernstian responses toward Cu2+ in natural water background. This work emphasizes an ISM-free concept and presents a scheme for the development of potentiometric Cu2+ sensors.

Sulfur-bridged bonds enabled structure modulation and space confinement of MnS for superior sodium-ion capacitors

Manganese sulfide (MnS) is a promising converion-type anode for sodium storage, owing to the virtues of high theoretical capacity, coupled with it crustal abundance and cost-effectiveness. Nevertheless, MnS suffers from inadequate electronic conductivity, sluggish Na+ reaction kinetics and considerable volume variation during discharge/charge process, thereby impeding its rate capability and capacity retention. Herein, a novel lamellar heterostructured composite of Fe-doped MnS nanoparticles/positively charged reduced graphene oxide (Fe-MnS/PG) was synthesized to overcome these issues. The Fe-doping can accelerate the ion/electron transfer, endowing fast electrochemical kinetics of MnS. Meanwhile, the graphene space confinement with strong MnSC bond interactions can facilite the interfacial electron transfer, hamper volume expansion and aggregation of MnS nanoparticles, stabilizing the structural integrity, thus improving the Na+ storage reversibility and cyclic stability. Combining the synergistic effect of Fe-doping and space confinement with strong MnSC bond interactions, the as-produced Fe-MnS/PG anode presents a remarkable capacity of 567 mAh/g at 0.1 A/g and outstanding rate performance (192 mAh/g at 10 A/g). Meanwhile, the as-assembled sodium-ion capacitor (SIC) can yield a high energy density of 119 Wh kg-1 and a maximum power density of 17500 W kg-1, with capacity retention of 77 % at 1 A/g after 5000 cycles. This work offers a promising strategy to develop MnS-based practical SICs with high energy and long lifespan, and paves the way for fabricating advanced anode materials.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

A carbonyl-rich conjugated organic compound for aqueous rechargeable Na+ storage with wide voltage window workability

Organic compounds have become an important electrode material for aqueous electrochemical energy storage. However, organic electrodes still face poor performance in aqueous batteries due to insufficient electrochemical activity. In this work, a novel conjugated quinone compound containing a rich carbonyl group was designed. The quinone compound was synthesized by a simple dehydration reaction of pyrene-4,5,9,10-tetrone (PTO) and 1,2-diaminoanthraquinone (1,2-AQ); it contains 4 pyrazines (CN) from AQ and 4 carbonyl groups (CO), as well as a large number of active sites and the excellent conductivity brought by its conjugated structure ensures the high theoretical capacity of PTO-AQ. In the context of aqueous sodium ion batteries (ASIBs), the electrode material known as PTO-AQ exhibits a notable reversible discharge capacity of 117.9 mAh/g when subjected to a current density of 1 A/g; impressively, it maintained a capacity retention rate of 74.3 % even after undergoing 500 charge and discharge cycles, a performance significantly surpassing that of pristine PTO and AQ. Notably, PTO-AQ exhibits a wide operating voltage range (-1.0-0.5 V) and a cycle life of up to 10,000 cycles. In situ Raman and ex situ measurements were used to analyze the structural changes of PTO-AQ during charge and discharge and the energy storage mechanism in NaAC. The effective promotion of Na+ storage brought by a rich carbonyl group was obtained. The structural energy level and electrostatic potential of PTO-AQ were calculated, and the active center distribution of PTO-AQ was obtained. This work serves as a guide for designing high-performance aqueous organic electrode materials that operate across a wide voltage range while also explaining their energy storage mechanism.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Fully-Printed Flexible Aqueous Rechargeable Sodium-Ion Batteries

The flexible aqueous rechargeable sodium-ion batteries (ARSIBs) are a promising portable energy storage system that can meet the flexibility and safety requirements of wearable electronic devices. However, it faces huge challenges in mechanical stability and facile manufacturing processes. Herein, the first fully-printed flexible ARSIBs with appealing mechanical performance by screen-printing technique is prepared, which utilizes Na3 V2 (PO4 )2 F3 /C (NVPF/C) as the cathode and 2% nitrogenous carbon-loaded Na3 MnTi(PO4 )3 /C (NMTP/C/NC) as the anode. In particular, the organic co-solvent ethylene glycol (EG) is cleverly added to 17 m (mol kg-1 ) NaClO4 electrolyte to prepare a 17 m NaClO4 -EG mixed electrolyte. This mixed electrolyte can withstand low temperatures of -20 °C in practical applications. Encouragingly, the fully-printed flexible ARSIBs (NMTP/C/NC//NVPF/C) exhibit a discharge capacity of 40.1 mAh g-1 , an energy density of 40.1 Wh kg-1 , and outstanding cycle performance. Moreover, these batteries with various shapes can be used as an energy wristband for an electronic watch in the bending states. The fully-printed flexible ARSIBs in this work are expected to shed light on the development of energy for wearable electronics.