Assessing of Removal Efficiency of Indigo Carmine from Wastewater Using MWCNTs

A sustainable lignin-clay nano-absorbent for highly efficient methylene blue removal

Water pollution caused by toxic dyes such as methylene blue (MB) has become a bottleneck for recycling or reusing enormous industrial wastewater. Designing a green and cost-effective bio-absorbent for the highly efficient removal of MB from wastewater is crucial but remains a great challenge. In this study, abundant, inexpensive, and environmentally benign lignin and bentonite were used as starting materials, and quaternary and amphiphilic lignin as a network macromolecule was designed to be inserted into the galleries of the stacked bentonite clay to prepare lignin-bentonite nanohybrids. The specific surface area of the modified nano-absorbent was significantly increased to 45.60 m2/g and owned a type II-like isothermal mechanism. The absorbent showed a maximum removal of MB of 99.7 % at neutral pH and room temperature with a maximum adsorption capacity of 822.22 mg/g, demonstrating the potential of an excellent adsorbent. The MB adsorption process fits well with both Langmuir and Freundlich isotherm models, the adsorption mechanism includes strong electrostatic attraction between absorbent and MB, and physical adsorption in a complicated monolayer and multiple macroporous structures. This study leverages the economic and environmental benefits of lignin and bentonite clay to prepare a cost-effective bio-absorbent for efficient removal of MB from aqueous solutions.

Hydrothermal chemical modification of red mud for efficient adsorption of methylene blue

Red mud (RM) is the industrial solid waste produced after alumina extraction from bauxite, and most RM is directly discharged to the landfill yards without any treatment. In this study, modified red mud (MRM) was synthesized by a hydrothermal chemical modification method as an efficient adsorbent for methylene blue (MB) removal. The prepared MRM was characterized by X-ray fluorescence spectroscopy, X-ray diffraction, scanning electron microscope, transmission electron microscope, and Fourier transform infrared spectrometer. The effects of reaction time, initial MB concentrations, MRM dosage, temperature, and system pH were investigated in the MB batch adsorption experiments. The results showed that the modification method increased the specific surface area of RM material from 16.72 to 414.47 m2/g. The maximum adsorption capacity of MRM for MB was 280.18 mg/g under the conditions of initial MB concentration of 1000 mg/L, reaction time of 300 min, temperature of 25 ℃, and natural pH of 6.06. Meanwhile, the adsorption kinetics and equilibrium isotherms were demonstrated to fit well with the pseudo-second-order kinetic model and Temkin isotherm, respectively. This study provides a new method for the valorization of RM and demonstrates that MRM can be used as a low cost and environmentally friendly potential adsorbent for the removal of MB from wastewater.

Preparation of magnetic activated carbon fibers@Fe3O4 by electrostatic self-assembly method and adsorption properties for methylene blue

Nano-Fe3O4 was loaded onto coconut-based activated carbon fibres (CACF) using an electrostatic self-assembly method. The effects of the mass ratio of CACF to nano-Fe3O4, loading time, pH and temperature on the loading effect were investigated and ideal loading conditions were determined. To study the adsorption performance of MACF@Fe3O4 for methylene blue, the effects of the initial concentration, pH and time on the adsorption were investigated and the working conditions of adsorption were established. MACF@Fe3O4 was systematically characterized. Adsorption kinetics were investigated under ideal conditions. The ideal loading conditions for MACF@Fe3O4 were as follows: mass ratio of 1:1, 20 min, pH 9.36, 22.5°C. The saturation magnetization of MACF@Fe3O4 was 48.2263 emu·g-1, which could be quickly separated under an external magnetic field. When the dosage was 0.010 g, the adsorption rate reached 97.29% and the maximum adsorption capacity was 12.1616 mg·g-1. The adsorption process conformed to pseudo-first-order kinetics during the first 15 min and pseudo-second-order kinetics during 20-120 min. The equations wereln( Q e - Q t )=2.2394-0.0689t andt Q t =0.0774 + 0.5295t , respectively. The isothermal adsorption model showed that MACF@Fe3O4 was more in line with the Langmuir model, indicating that the adsorption process was mainly monolayer adsorption. The thermodynamic analysis results showed that the adsorption process of MB by MACF@Fe3O4 was an endothermic process. In this study, MACF@Fe3O4 with high adsorption capacity and easy separation from coconut palm fibres has good application prospects in the field of adsorption, which can promote the high-value utilization of coconut palms.

Preparation of MgAl-LDHs loaded with blast furnace slag and its removal of Cu(II) and methylene blue from aqueous solution

Blast furnace slag (BFS) is a kind of waste produced in industrial production, as well as a valuable secondary resource. In this paper, layered double hydroxides composites (BFS/LDHs) were prepared by aqueous polymerization, with industrial waste BFS as modifier and magnesium nitrate, aluminium nitrate, and urea as raw materials. BFS/LDHs have been characterized by using scanning electron microscopy (SEM), fourier infrared spectrometer (FT IR), x-ray diffraction (XRD), and the specific surface area analyser (BET). The adsorption of BFS/LDHs on Cu (II) and methylene blue (MB) was investigated by batch experiments. The results showed that the adsorption capacity of BFS/LDHs to Cu (II) is stronger than that of MB. What's more, the solid concentration effect was found in the process of sorption kinetics and sorption isotherms. The sorption kinetics curves of Cu (II) and MB on BFS/LDHs were well fitted by the quasi-second-order kinetics under different adsorbent concentrations. Langmuir and Freundlich sorption isotherm models were used to analyse the adsorption. It showed that the adsorption conforms to Langmuir and Freundlich's adsorption isotherm models. The BFS/LDHs composites have good recycling availability in this adsorption process of Cu (II) and MB, the removal capacity of which was reduced by 16.1% and 3.8% after being recycled for six times, respectively. More importantly, BFS/LDHs composites are not only expected to become a sewage treatment agent, but also to solve the problem of industrial waste treatment, which is a win-win strategy.

UiO-66-NH2/guanidine-functionalized chitosan: A new bio-based reusable bifunctional adsorbent for removal of methylene blue from aqueous media

Methylene Blue (MB) is a common pollutant found in industrial wastewater, and its removal is crucial to ensure environmental sustainability. Due to MOFs have high surface area, tunable pore size distribution, and excellent adsorption capacity, in the current study, Uio-66-NH2@Cs-ISo-Gu nanohybrid was prepared through soluthermal method and then was used to remove MB dye. The results displayed that dye optimal adsorption by Uio-66-NH2@Cs-ISo-Gu nanohybrid occurred in the first 40 min, pH = 8, and low dye concentrations. Also, with increasing temperature, the amount of adsorption has decreased, which indicated the adsorption process would be exothermic. Based on the results, the Uio-66-NH2@Cs-ISo-Gu nanohybrid has a surface area of 120.9 m2.g-1 and a type IV isotherm. Also, the Freundlich isotherm and pseudo-second order models had the best agreement with the experimental data. The maximum adsorption capacity for this nanohybrid was 178.571, 153.846, and 135.135 mg.g-1 at 25 °C, 45 °C, and 65 °C temperatures, respectively, which could be successfully used as an excellent adsorbent in treatment of wastewater. However, further research is needed to understand the underlying adsorption mechanism and optimize the process for efficient removal of MB from contaminated water sources.

Response surface methodology, and artificial neural network model for removal of textile dye Reactive Yellow 105 from wastewater using Zeolitic Imidazolate-67 modified by Fe3O4 nanoparticles

The applicability of Zeolitic Imidazolate-67, Modified by Fe3O4 Nanoparticles, was studied for removing textile dye Reactive yellow 105 from wastewater by adsorption method using response surface methodology (RSM). For the adsorption characterization of the adsorbent used in HE-4G dye adsorption, BET, FTIR, XRD, and SEM analyses were performed. The impacts of variables, including initial HE-4G dye concentration (X1), pH (X2), adsorbent dosage (X3), and sonication time (X4), the highest removal efficiency as 98%, 10 mg/L initial concentration, pH 6, 0.025 g adsorbent dosage, and 6.0 min time respectively. Adsorption equilibrium and kinetic data it, that data were for the Langmuir isotherm, pseudo-second-order kinetics, and maximum adsorption capacity (105.0 mg/g), respectively. Thermodynamic parameters indicated HE-4G dye adsorption is feasible, spontaneous and exothermic. Promising treatment capabilities of the ZIF-67-Fe3O4NPs have been during the comparative adsorption removal of HE-4G dye from DI water against spiked natural water samples and synthetic Na+, K+, Ca2+, and Mg2+ solutions. The observed outcome is the suitability of the artificial neural network model as a tool for mean square error, (MSEANN = 0.53, and R2 = 0.9926) for removing HE-4G dye. Results that ZIF-67-Fe3O4NPs, like being recyclable, and cost-efficient made it a promising absorbent for wastewater.

Fabrication, Properties, and Performance of Polymer-Clay Nanocomposites for Organic Dye Removal from Aqueous Media

Methylene blue dye (MB dye) is a harmful contaminant for wastewater streams of industries and is harmful to human and aquatic life. An ecofriendly sugar templating process was used to generate porous bentonite/polydimethylsiloxane (PB) and porous magnetite nanoparticles/bentonite/polydimethylsiloxane (PBNP) composite absorbents to remove MB dye in this study. During the infiltration of PDMS solution into the sugar template in the vacuum chamber, bentonite and magnetite particles were integrated on the surface of the PDMS, and the porous structure was generated during the leaching out of sugar particles in water. The absorbents were characterized using Fourier infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The absence of the methyl bond at 2924 cm-1 and phenol bond at 3325 cm-1 in the FTIR spectra of the formed membrane proves that the food grade sugar was completely removed. The SEM images confirm that porosity was achieved as well as uniform mixing of the in the formation of composite. MB dye was effectively removed from wastewater using the as-prepared composite as absorbent. The removal efficiencies of the composite PBNP and PB were ~91% and ~85%, respectively. The experimental data was applied to pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models as well as the Dubinin-Radushkevich, Harkins-Jura, and Elovich models for the adsorption isotherm. The data was found to fit the pseudo-second-order and Elovich models, respectively. The results show that the presence of magnetite nanoparticles improved MB dye removal significantly.

Adsorption Properties of Modified ATP-RGO Composite Aerogel for Removal of Malachite Green and Methyl Orange from Unitary and Binary Aqueous Solutions

In this paper, the modified attapulgite-reduced graphene oxide composite aerogel (ATP-RGO CA) was prepared by sol-gel method using modified attapulgite as silica source. The removal of the cationic dye malachite green (MG) and azo dye methyl orange (MO) onto ATP-RGO CA from unitary and binary systems was investigated. Morphology and microstructure studies of ATP-RGO CA were investigated by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and specific surface area and porosity analysis. Experiments were carried out as a function of pH, contact time, initial dye concentration, and temperature in unitary and binary systems. The adsorption kinetics, isotherms, thermodynamics, and dye desorption were studied in unitary and binary dye systems. The adsorption kinetics was modeled using the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics equations. The equilibrium adsorption data of MG and MO dyes on ATP-RGO CA were analyzed. Thermodynamic parameters of dye adsorption were obtained. In addition, the regeneration of ATP-RGO CA was studied using dye desorption in unitary and binary dye systems. The adsorption kinetics of the dyes followed pseudo-second-order kinetics. The results indicate that the Langmuir model provides the best correlation of the experimental data. The thermodynamic studies showed that the dye adsorption onto ATP-RGO CA was a spontaneous and endothermic reaction. High desorption of MG and MO showed the regeneration of ATP-RGO CA. It can be concluded that ATP-RGO CA is suitable as an adsorbent material to remove MG and MO dyes from unitary and binary systems.

Fabrication of attapulgite-based dual responsive composite hydrogel and its efficient adsorption for methyl violet

In this work, attapulgite (ATP)-based dual sensitive poly (N-isopropylacrylamide-co-acrylic acid) composite hydrogel, P(NIPAM-co-AA)/ATP, was prepared by free radical polymerization. The prepared composite hydrogel was characterized via methods of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), zeta potential analysis and Brunauer, Emmett, and Teller (BET) etc. The composite hydrogel showed pH and temperature sensitive behaviour, with lower critical solution temperature (LCST) of 35°C and highest swelling occurred at pH 8.0. The adsorption of methyl violet (MV) can be controlled by the hydrogel responsiveness, and 95.78% of MV can be removed at pH 8.0 and 35°C. The addition of a small amount of ATP (3 Wt%) can improve the swelling ratio and adsorption capacity. Kinetic analysis demonstrated that the experimental data were best fitted to the pseudo-second order model. Isotherm analysis showed that the equilibrium data followed Langmuir model with the adsorption capacity of 168.35 mg g^-1. In addition, the composite hydrogel has high adsorption selectivity for cationic dyes, and MV-loaded hydrogel is easy to regenerate, which can be used for successive adsorption cycles. These results demonstrate that the composite hydrogel has potential application in dye wastewater treatment.

Iron oxide (Fe3O4)-laden titanium carbide (Ti3C2Tx) MXene stacks for the efficient sequestration of cationic dyes from aqueous solution

We prepared two-dimensional (2D) stack-structured magnetic iron oxide (Fe₃O₄) nanoparticle anchored titanium carbide (Ti₃C₂T_x) MXene material (Ti₃C₂T_x/Fe₃O₄). It was used as a potential adsorbent to remove carcinogenic cationic dyes, such as methylene blue (MB) and rhodamine B (Rh B), from aqueous solutions. Ti₃C₂T_x/Fe₃O₄ exhibited maximum adsorption capacities of 153 and 86 mg g^-1 for MB and Rh B dyes, respectively. Batch adsorption experimental data fits the Langmuir model well, revealing monolayer adsorption of MB and Rh B onto the adsorption sites of Ti₃C₂T_x/Fe₃O₄. Additionally, Ti₃C₂T_x/Fe₃O₄ showed rapid MB/Rh B adsorption kinetics and attained equilibrium within 45 min. Moreover, Ti₃C₂T_x/Fe₃O₄ demonstrated recyclability over four cycles with high stability due to the presence of magnetic Fe₃O₄ nanoparticles. Furthermore, it exhibited remarkable selectivities of 91% and 88% in the presence of co-existing cationic and anionic dyes, respectively. Given the extraordinary adsorption capacities, Ti₃C₂T_x/Fe₃O₄ may be a promising material for the effective removal of cationic dyes from aqueous media.