Switching to the Dry-Powder Inhaler Easyhaler®: A Narrative Review of the Evidence

Formulation of Resveratrol-Loaded Polycaprolactone Inhalable Microspheres Using Tween 80 as an Emulsifier: Factorial Design and Optimization

Resveratrol (RSV) is a bioactive phytoconstituent that has potential applications in respiratory diseases. However, poor oral bioavailability is the major hurdle to its clinical use. In the present work, resveratrol-loaded polycaprolactone (PCL) inhalable microspheres (MSs) were formulated to improve their therapeutic potential. The inhalable microspheres were formulated using the emulsion-solvent evaporation method. In this research, inhalable resveratrol microspheres were prepared using Tween 80 in place of polyvinyl alcohol which formed insoluble lumps. A 3² factorial design was applied taking polymer (PCL) and emulsifier (Tween 80) as independent variables and drug loading (DL) and encapsulation efficiency (EE) as dependent variables. The DL and EE of the optimized formulation were found to be 30.6% and 63.84% respectively. The in vitro aerosolization study performed using the Anderson cascade impactor showed that the fine particle fraction (FPF) of optimized resveratrol polycaprolactone microspheres (RSV-PCL-MSs) blended with lactose, and RSV-PCL-MSs were significantly higher than those of the pure drugs. The MMAD_T (theoretical mass median aerodynamic diameter) of optimized RSV-PCL-MSs was found to be 3.25 ± 1.15. The particle size of microspheres was within the inhalable range, i.e., between 1 and 5 µm. The morphological analysis showed spherical-shaped particles with smooth surfaces. The in vitro release study showed sustained drug release from the microspheres for up to 12 h. The study concluded that resveratrol-loaded inhalable microspheres may be an efficient delivery system to treat COPD.

The assessment of effectiveness, tolerance, and patient satisfaction with the use of a new fixed-dose combination product, containing salmeterol and fluticasone propionate, Salflumix Easyhaler® in the treatment of asthma in the daily clinical practice

BACKGROUND

The effectiveness of a fix-dose salmeterol/fluticasone combination therapy in asthma was previously shown for the original product. The study aim was to evaluate the clinical effectiveness and safety of a second entry DPI - dry powder inhaler (Salflumix Easyhaler) in patients with asthma in everyday clinical practice.

PATIENTS AND METHODS

This multicenter Investigator-Initiated Study that enrolled 2,037 adult outpatients with asthma treated with Salflumix Easyhaler, was conducted by 220 pulmonologists across Poland. Asthma control was assessed during 3 visits with 6 ± 2 weeks intervals based on the Asthma Control Test (ACT). In addition, patient Satisfaction with Asthma Treatment Questionnaire (SATQ) and adherence and adverse events (AEs) were monitored.

RESULTS

During the observation (86 ± 30 days) the percentage of patients with controlled asthma (ACT 20-25 pts) increased from 35.5% at the first visit to 86.5% at the third visit (p < 0.001). In the subgroup analysis, there were more patients not obtaining asthma control among patients that switched from the treatment with other devices than in naive ones. Global SATQ scores increased from 5.8 ± 0.7 to 6.2 ± 0.6 during the observation. Patients' satisfaction with the use of the Salflumix Easyhaler was high. Adherence exceeded 95%. Eight AEs were reported.

CONCLUSIONS

Salflumix Easyhaler is highly effective and well-tolerated by naïve patients with asthma and those switching from another device. In general, patients show good compliance with medical product and are satisfied with the use of this new device, and not reporting difficulties and errors related to its' use. Their physicians' overall perception of Salflumix Easyhaler use is very positive.

The Efficacy, Tolerance and Acceptance of a New Fixed-Dose Salmeterol and Fluticasone Propionate Dry-Powder Inhaler—Salflumix Easyhaler® in COPD Patients in the Daily Clinical Practice

The efficacy of the fix-dose salmeterol/fluticasone propionate combination in chronic obstructive pulmonary disease (COPD) was only shown for the original product. This investigator-initiated study aimed to prove the efficacy and safety of Salflumix Easyhaler®, a second-entry product (dry-powder inhaler) in a real-life setting. The efficacy of the therapy was assessed in 440 COPD outpatients (36.1% classified as C&D groups according to GOLD) using the COPD assessment test (CAT) and the modified Medical Research Council (mMRC). During 86 ± 30 days, the frequency of COPD with a big and very big impact on life (CAT > 20 pts); and high scores of dyspnea (mMRC ≥ 2) decreased from 60.7% and 57.5% at I visit to 15.2% and 22.6% at III visits, respectively (p < 0.001). There was a greater improvement in newly diagnosed patients than those who switched from other devices due to insufficient disease control or patient dissatisfaction with the used inhaler. Patients’ satisfaction was scored 3.2–3.5 in a 4 pts scale. Physicians scored the burden related to the use of Salflumix Easyhaler® as very low. Adherence exceeded 90%. This study supports effectiveness, satisfaction, and convenience with the use of this new product in COPD, and shows that ICS-containing DPI therapy is still improperly prescribed for patients with a low risk of COPD exacerbation in real-life settings.

Dry powder inhalers of antitubercular drugs

Despite advancements in the medical and pharmaceutical fields, tuberculosis remains a major health problem globally. Patients do not widely accept the conventional approach to treating tuberculosis (TB) due to prolonged treatment periods with multiple high doses of drugs and associated side effects. A pulmonary route is a non-invasive approach to delivering drugs, hormones, nucleic acid, steroids, proteins, and peptides directly to the lungs, improving the efficacy of the treatment and consequently decreasing the adverse effect of the treatment. This route has been successfully developed for the treatment of various respiratory diseases such as asthma, chronic obstructive pulmonary disease (COPD), tuberculosis (TB), lung cancer, and other pulmonary infections. The major approaches of inhalation delivery systems include nebulizers, metered-dose inhalers (MDIs), and dry powder inhalers (DPIs). However, dry powder inhalers (DPIs) are more advantageous due to their stability and ability to deliver a high dose of the drug to the lungs. The present review analyzes the modern therapeutic approach of inhaled dry powders, with a special focus on novel drug delivery system (NDDS) based DPIs for the treatment of TB. The article also discussed the challenges of preparing inhalable dry powder formulations for the treatment of TB. The clinical development of inhalable anti-TB drugs is also reviewed.

[Reduction of greenhouse gas emissions by inhaler choice in the therapy of asthma and COPD patients]

BACKGROUND

The global warming potential of inhaled medication depends on the applied inhaler. Pressurised metered dose inhalers (pMDI) contain green-house gases (GHG) and are associated with a 10 to 40 times higher CO₂-footprint than GHG-free dry-powder inhalers (DPI).

AIM

Feasibility and relevance of prescription conversion from pMDI to DPI were investigated in a pulmonology outpatient clinic regarding the CO₂-footprint and the economic costs under real-world conditions.

METHODS

Based on exemplary therapy regimens of different intensity for three patients, the annual CO₂-footprint and daily therapy costs were investigated. The effect of converting from pMDI to DPI on CO₂-footprint and economic costs were calculated on the basis of prescriptions during the first quarter of 2020 compared to the first quarter of 2021.

RESULTS

Conversion of a pMDI-based inhalative therapy of exemplary asthma and COPD patients to a DPI-based therapy saved between 115 and 480 kg CO₂ equivalents (CO₂e) per year and patient depending on intensity of therapy and GHG used. A total of 184,297 and 164,165 defined daily doses (DDD) were prescribed by the clinic for 2,610 (January-March 2020) and 2,693 (January-March 2021) patients, respectively. The proportion of DPI prescribed increased from 49 to 78% of total inhaler prescriptions. The increase in prescriptions for single-agent inhaled corticosteroids from 19.8 to 74.1% of total inhaler prescriptions was particularly striking. Due to the conversion, emissions were reduced by 35,000 to 40,000 kg CO₂e between January-March 2020 and January-March 2021 in our clinic. During the same period, there was no increase in costs compared to nationwide costs. The relation of prescribed DPI and pMDI in the same period did not change among the pulmonologists in Saxony nor nationwide in Germany. If all ambulant pulmonologists in Germany would prescribe 75% DPI, CO₂-emissions could be reduced by 11,650 tonnes CO₂e per quarter and 46,600 tonnes CO₂e per year, respectively.

CONCLUSION

The type of inhalers can be converted from pMDI to DPI in a real-world setting. Thereby, a significant reduction of GHG emissions is possible without increased costs.