Ferrite Materials for Photoassisted Environmental and Solar Fuels Applications

Surface Adsorption and Photoinduced Degradation: A Study of Spinel Ferrite Nanomaterials for Removal of a Model Organic Pollutant from Water

Spinel oxide nanocrystals are attractive materials for photoinduced advanced oxidation processes that degrade organic pollutants in water due to their chemical stability and tunability, visible light absorption, and magnetic recoverability. However, a systematic understanding of the structural and chemical factors that control the reactivity of specific spinel oxide nanocrystal materials toward photoinduced degradation processes is lacking. This Perspective illustrates these knowledge gaps through an investigation into the impacts of surface chemistry and composition of spinel ferrite nanocrystals of formula MFe2O4 (M = Mg, Fe, Co, Ni, Cu, Zn) on their ability to remove a model organic pollutant (methyl orange (MO)) from water. We identify two mechanisms by which the nanocrystals remove MO from water: (i) surface adsorption and (ii) photoinduced degradation under visible light irradiation in the presence of hydrogen peroxide via the photo-Fenton reaction. Nanocrystals that do not contain any surface ligands are more effective at removing MO from water than nanocrystals that contain surface ligands, despite our observation that the ligand-less nanocrystals do not form stable colloidal dispersions in water, while ligand-coated nanocrystals are colloidally stable. For many of the spinel ferrite compositions studied here, the fraction of methyl orange removal via adsorption to the nanocrystal surface in the absence of photoexcitation is larger than the fraction removed under irradiation. Our data indicate that the composition-dependent surface charge of the nanocrystals controls the degree of surface adsorption of the charged MO molecule. Overall, these results demonstrate that careful consideration of the impacts of surface chemistry on the behavior of spinel ferrite nanocrystals is required to accurately assess and subsequently understand their activity toward the photoinduced degradation of organic molecules.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Recent advances toward structural incorporation for stabilizing heavy metal contaminants: A critical review

Heavy metal pollution has resulted in serious environmental damage and raised significant public health concerns. One potential solution in terminal waste treatment is to structurally incorporate and immobilize heavy metals in some robust frameworks. Yet extant research offers a limited perspective on how metal incorporation behavior and stabilization mechanisms can effectively manage heavy metal-laden waste. This review sets forth detailed research on the feasibility of treatment strategies to incorporate heavy metals into structural frameworks; this paper also compares common methods and advanced characterization techniques for identifying metal stabilization mechanisms. Furthermore, this review analyses the typical hosting structures for heavy metal contaminants and metal incorporation behavior, highlighting the importance of structural features on metal speciation and immobilization efficiency. Lastly, this paper systematically summarizes key factors (i.e., intrinsic properties and external conditions) affecting metal incorporation behavior. Drawing on these impactful findings, the paper discusses future directions in the design of waste forms that efficiently, effectively treat heavy metal contaminants. By examining tailored composition-structure-property relationships in metal immobilization strategies, this review reveals possible solutions for crucial challenges in waste treatment and enhances the development of structural incorporation strategies for heavy metal immobilization in environmental applications.

Catalytic Degradation of Ciprofloxacin in Aqueous Solution by Peroxymonosulfate Activated with a Magnetic CuFe2O4@Biochar Composite

A magnetic copper ferrite and biochar composite (CuFe2O4@BC) catalyst was prepared by an improved sol-gel calcination method and initially used for the removal of antibiotics ciprofloxacin (CIP) by activated peroxymonosulfate (PMS). Using CuFe2O4@BC as the activator, 97.8% CIP removal efficiency could be achieved in 30 min. After a continuous degradation cycle, CuFe2O4@BC catalyst still exhibited great stability and repeatability and could also be quickly recovered by an external magnetic field. Meanwhile, the CuFe2O4@BC/PMS system presented good stability for metal ion leaching, which was far less than the leaching of metal ions in the CuFe2O4/PMS system. Moreover, the effects of various influencing factors, such as initial solution pH, activator loading, PMS dosage, reaction temperature, humic acid (HA), and the inorganic anions were explored. The quenching experiments and the electron paramagnetic resonance (EPR) analysis manifested that hydroxyl radical (•OH), sulfate radical (SO4•−), superoxide radical (O2•−), and singlet oxygen (1O2) were generated in the CuFe2O4@BC/PMS system, while 1O2 and O2•− are mainly involved in the degradation process. The synergistic effect between CuFe2O4 and BC enhanced the structural stability and electrical conductivity of the material, which promoted the bonding between the catalyst and PMS, resulting in the enhanced catalytic activity of CuFe2O4@BC. This indicates that CuFe2O4@BC activating PMS is a promising remediation technique for CIP-contaminated water.

An efficient and eco-compatible multicomponent synthesis of 2,4,5-trisubstituted imidazole derivatives using modified-silica-coated cobalt ferrite nanoparticles with tungstic acid

The aim of this study has been to offer a method for the synthesis of 2,4,5-trisubstituted imidazole derivatives based on green chemistry principles. Therefore, a one-pot multicomponent cyclocondensation reaction through aldehyde interaction with ammonium acetate and 1,2-diketone under solvent-free conditions was utilized as an eco-effective synthetic route using CoFe₂O₄@SiO₂@(-CH₂)₃OWO₃H NPs as the catalyst. The stabilized tungstic acid on 3-chloropropyl-anchored SiO₂-coated CoFe₂O₄ magnetic nanoparticles was designed, prepared, and applied as a recyclable heterogeneous acid catalyst to attain high product yield in a short reaction time. The nanocatalyst structure was confirmed using FT-IR, Raman, XRD, FE-SEM, EDX, VSM, and TGA techniques, and the organic product structures were examined by melting point, FT-IR and ¹H NMR analyses.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Microwave-Enhanced Crystalline Properties of Zinc Ferrite Nanoparticles

Two series of ZnFe₂O₄ mixed cubic spinel nanoparticles were prepared by a coprecipitation method, where a solution of Fe³⁺ and Zn²⁺ was alkalised by a solution of NaOH. While the first series was prepared by a careful mixing of the two solutions, the microwave radiation was used to enhance the reaction in the other series of samples. The effect of the microwave heating on the properties of the prepared particles is investigated. X-ray powder diffraction (XRD), ⁵⁷Fe Mössbauer spectroscopy and magnetometry were employed to prove the cubic structure and superparamagnetic behavior of the samples. The particle size in the range of nanometers was investigated by a transmission electron microscopy (TEM), and the N₂ adsorption measurements were used to determine the BET area of the samples. The stoichiometry and the chemical purity were proven by energy dispersive spectroscopy (EDS). Additionally, the inversion factor was determined using the low temperature Mössbauer spectra in the external magnetic field. The microwave heating had a significant effect on the mean coherent length. On the other hand, it had a lesser influence on the size and BET surface area of the prepared nanoparticles.

Antibacterial Properties of PMMA Functionalized with CuFe2O4/Cu2O/CuO Nanoparticles

We have prepared a composite thin coating by incorporation of CuFe2O4/Cu2O/CuO nanoparticles in polymethyl methacrylate (PMMA) matrix by using the solution casting method. The electrical explosion of two twisted wires (EETW) was used to obtain multicomponent CuFe2O4/Cu2O/CuO nanoparticles with an average particle size of 20–70 nm. The microscopic studies showed that the nanoparticles in the composite coatings are evenly distributed. However, nanoparticles are strongly agglomerated as the powder concentration in the coating increases to 5 wt.% and 10 wt.%, as the size of particle agglomerates increases to 50 and 100 μm, respectively. Therefore, nanoparticles were pre-treated with ultrasound when introduced into the PMMA matrix. The thermal stability of the composite coating does not change with the introduction of CuFe2O4/Cu2O/CuO nanoparticles in the amount of 5 wt.%. The inclusion of nanoparticles in the PMMA matrix significantly enhances its antibacterial activity. The addition of 5 wt.% nanoparticles inhibited the growth of E. coli by 100% and the growth of MRSA by 99.94% compared to pure PMMA already after 3 h of exposure of bacteria on the surface of the composites. This research provides an easy-to-manufacture and cost-efficient method for producing a CuFe2O4/Cu2O/CuO/PMMA composite coating with a broad application as an antibacterial material.

Facile synthesis of magnetic framework composite MgFe2O4@UiO-66(Zr) and its applications in the adsorption-photocatalytic degradation of tetracycline

Recently, metal-organic framework (MOF)-based hybrid composites have attracted significant attention in photocatalytic applications. In this work, MgFe₂O₄@UiO-66(Zr) (MFeO@UiO) composites with varying compositions were successfully synthesized via facile in situ assemblies. Depositing the UiO-66(Zr) framework onto ferrite nanoparticles yielded a composite structure having a lower bandgap energy (2.28-2.60 eV) than that of the parent UiO-66(Zr) (~3.8 eV). Moreover, the MFeO@UiO composite exhibited magnetic separation property and improved porosity. The removal experiment for tetracycline (TC) in aqueous media revealed that the MFeO@UiO composite exhibited a high total TC removal efficiency of ca. ~94% within 45-min preadsorption and 120-min visible-light illumination, which is higher than that of pristine ferrite and UiO-66(Zr). The enhanced photodegradation efficiency of MFeO@UiO is attributed to efficient interfacial charge transfer at the heterojunction and the synergistic effect between the semiconductors. Radical scavenging experiments revealed that photogenerated holes (h⁺) and hydroxyl radicals (·OH) were the major reactive species involved in TC photodegradation. Moreover, the prepared MFeO@UiO nanocomposite showed good recyclability and renewability, making it a potential material for wastewater treatments.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

A facile green synthesis of MgCoFe2O4 nanomaterials with robust catalytic performance in the synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives

In this study, an efficient, rapid and simple plant-mediated green sol-gel auto-combustion procedure was presented to synthesis magnesium-cobalt ferrite (MgCoFe2O4) nanocatalyst using an aqueous extract of apple skins as a chelating/combustion agent. The catalyst was assessed by multiple techniques, including FT-IR, XRD, FE-SEM, EDS, elemental mapping, TGA-DTA and VSM. Then, the catalytic potential of the as-prepared MgCoFe2O4 nanocatalyst was examined in the three-component condensation reaction of 1,3-dimethyl barbituric acid, aldehydes and malononitrile for the one-pot synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives. The obtained results indicated the excellent catalytic activity of the MgCoFe2O4 in the three-component reaction. The high catalytic activity of these nanomaterials could be attributed to the synergistic electronic effect between nanoparticles, which showcased the enormous potential of multi-metallic nanomaterials in the catalysis field. More importantly, MgCoFe2O4 showed excellent magnetic properties, and it could be successfully separated and recovered by applying an external magnetic for further reuses. To the best of our knowledge, green synthesis of MgCoFe2O4 mediated by aqueous plant extract was reported here for the first time, and this work, therefore, can open up a new insight in the course of design, green synthesis and application of excellent green nanocatalyst for the sustainable processes. MgCoFe2O4 as a magnetically recyclable heterogeneous catalyst, has been synthesized through plant-mediated procedure using an aqueous extract of apple skins.

Catalytic activity comparison of natural ferrous minerals in photo-Fenton oxidation for tertiary treatment of dyeing wastewater

Natural ferrous minerals are readily available and recyclable catalysts in photo-Fenton-like oxidation for wastewater treatment. In this work, typical ferrous oxide and sulfide minerals including magnetite, chalcopyrite, and pyrrhotite were exploited as catalysts in heterogeneous photo-Fenton oxidation for purification of biological effluent of dyeing wastewater. In a wide initial pH range (3.0~7.5), ferrous mineral-based heterogeneous photo-Fenton-like reactions were proven to be effective on the oxidation of recalcitrant pollutants. COD removals achieved 60.57%, 58.83%, and 57.41% using pyrrhotite, chalcopyrite, and magnetite, respectively, as catalyst under ultraviolet irradiation of 220~275 nm at H₂O₂ concentration of 9.8 mM. The corresponding COD removals were 51.75% and 34.09% with or without ferrous sulfate additions in UV/H₂O₂ systems. Minerals exhibited excellent stability and reusability with photo-catalytic activity reduction of less than 10% in the reuse of 5 cycles. Dissolved iron concentrations were determined to be 1.86 mg L^-1, 4.62 mg L^-1, and 7.53 mg L^-1 for magnetite, chalcopyrite, and pyrrhotite, respectively, at pH 3 and decreased to zero in neutral pH environment, which were much lower than those required for homogenous Fenton reaction. It was deduced that oxidation of recalcitrant pollutants was mainly catalyzed by Fe(II) on the mineral surface. The more reactive oxygen species such as hydroxyl radicals were resulted from the reaction of surface Fe (II) with H₂O₂, H₂O₂ photolysis, and charge separation of minerals under UV irradiation.

Activity enhancement pathways in LaFeO3@TiO2 heterojunction photocatalysts for visible and solar light driven degradation of myclobutanil pesticide in water

LaFeO₃@TiO₂ heterojunction composites with a core-shell porous structure and LaFeO₃ contents in the 2.5-25 wt.% range have been synthesized via consecutive sol-gel syntheses and tested for the photocatalytic oxidation of the myclobutanil pesticide in water under solar light and pure visible light. Whatever the light spectrum, the kinetic rate constants for both myclobutanil degradation and TOC conversion exhibited a volcano-like profile with increasing the narrow band-gap (2.1 eV) LaFeO₃ content, the optimum composite strongly overperforming both single phases, with full myclobutanil mineralization achieved in 240 min in the best case. The light spectrum influenced the optimum LaFeO₃ content in the composite, being observed at 5 wt.% and 12.5 wt.% under solar and visible light, respectively. This has been attributed to the existence of different light-mediated reaction mechanisms. The optimum LaFeO₃/TiO₂ composite photocatalyst was active and stable after several runs under solar light with leached iron concentration below 0.1 mg/L in solution.

Synthesis of Spinel Ferrite MFe2O4 (M = Co, Cu, Mn, and Zn) for Persulfate Activation to Remove Aqueous Organics: Effects of M-Site Metal and Synthetic Method

Metal species and synthetic method determine the characteristics of spinel ferrite MFe₂O₄. Herein, a series of MFe₂O₄ (M = Co, Cu, Mn, Zn) were synthesized to investigate the effect of M-site metal on persulfate activation for the removal of organics from aqueous solution. Results showed that M-site metal of MFe₂O₄ significantly influenced the catalytic persulfate oxidation of organics. The efficiency of the removal of organics using different MFe₂O₄ + persulfate systems followed the order of CuFe₂O₄ > CoFe₂O₄ > MnFe₂O₄ > ZnFe₂O₄. Temperature-programmed oxidation and cyclic voltammetry analyses indicated that M-site metal affected the catalyst reducibility, reversibility of M²⁺/M³⁺ redox couple, and electron transfer, and the strengths of these capacities were consistent with the catalytic performance. Besides, it was found that surface hydroxyl group was not the main factor affecting the reactivity of MFe₂O₄ in persulfate solution. Moreover, synthetic methods (sol–gel, solvothermal, and coprecipitation) for MFe₂O₄ were further compared. Characterization showed that sol–gel induced good purity, porous structure, large surface area, and favorable element chemical states for ferrite. Consequently, the as-synthesized CuFe₂O₄ showed better catalytic performance in the removal of organics (96.8% for acid orange 7 and 62.7% for diclofenac) along with good reusability compared with those obtained by solvothermal and coprecipitation routes. This work provides a deeper understanding of spinel ferrite MFe₂O₄ synthesis and persulfate activation.

Recent Achievements in Development of TiO2-Based Composite Photocatalytic Materials for Solar Driven Water Purification and Water Splitting

Clean water and the increased use of renewable energy are considered to be two of the main goals in the effort to achieve a sustainable living environment. The fulfillment of these goals may include the use of solar-driven photocatalytic processes that are found to be quite effective in water purification, as well as hydrogen generation. H2 production by water splitting and photocatalytic degradation of organic pollutants in water both rely on the formation of electron/hole (e-/h+) pairs at a semiconducting material upon its excitation by light with sufficient photon energy. Most of the photocatalytic studies involve the use of TiO2 and well-suited model compounds, either as sacrificial agents or pollutants. However, the wider application of this technology requires the harvesting of a broader spectrum of solar irradiation and the suppression of the recombination of photogenerated charge carriers. These limitations can be overcome by the use of different strategies, among which the focus is put on the creation of heterojunctions with another narrow bandgap semiconductor, which can provide high response in the visible light region. In this review paper, we report the most recent advances in the application of TiO2 based heterojunction (semiconductor-semiconductor) composites for photocatalytic water treatment and water splitting. This review article is subdivided into two major parts, namely Photocatalytic water treatment and Photocatalytic water splitting, to give a thorough examination of all achieved progress. The first part provides an overview on photocatalytic degradation mechanism principles, followed by the most recent applications for photocatalytic degradation and mineralization of contaminants of emerging concern (CEC), such as pharmaceuticals and pesticides with a critical insight into removal mechanism, while the second part focuses on fabrication of TiO2-based heterojunctions with carbon-based materials, transition metal oxides, transition metal chalcogenides, and multiple composites that were made of three or more semiconductor materials for photocatalytic water splitting.

Interaction-determined sensitization photodegradation of dye complexes by boron nitride under visible light irradiation: experimental and theoretical studies

In this paper, the sensitization photodegradation of single and mixed dyes by wide band gap boron nitride (BN, 3.94 eV) under visible light irradiation has been investigated for the first time.