A compact wrist rehabilitation robot with accurate force/stiffness control and misalignment adaptation

Lightweight Bioinspired Exoskeleton for Wrist Rehabilitation Powered by Twisted and Coiled Artificial Muscles

Stroke, cerebral palsy, and spinal cord injuries represent the most common leading causes of upper limb impairment. In recent years, rehabilitation robotics has progressed toward developing wearable technologies to promote the portability of assistive devices and to enable home rehabilitation of the upper extremities. However, current wearable technologies mainly rely on electric motors and rigid links or soft pneumatic actuators and are usually bulky and cumbersome. To overcome the limitations of existing technologies, in this paper, a first prototype of a lightweight, ungrounded, soft exoskeleton for wrist rehabilitation powered by soft and flexible carbon fibers-based twisted and coiled artificial muscles (TCAMs) is proposed. The device, which weighs only 0.135 kg, emulates the arrangement and working mechanism of skeletal muscles in the upper extremities and is able to perform wrist flexion/extension and ulnar/radial deviation. The range of motion and the force provided by the exoskeleton is designed through simple kinematic and dynamic theoretical models, while a thermal model is used to design a thermal insulation system for TCAMs during actuation. The device’s ability to perform passive and active-resisted wrist rehabilitation exercises and EMG-based actuation is also demonstrated.

Design, modeling and control of an index finger exoskeleton for rehabilitation

With diverse areas of applications, wearable robotic exoskeleton devices have gained attention in the past decade. These devices cover one or more human limbs/joints and have been presented for rehabilitation, strength augmentation and interaction with virtual reality. This research is focused towards design, modeling and control of a novel series elastic actuation (SEA) based index finger exoskeleton with a targeted torque rendering capability of 0.3 Nm and a force control bandwidth of 3 Hz. The proposed design preserves the natural range of motion of the finger by incorporating five passive and two actively actuated joints and provides active control of metacarpophalangeal and proximal interphalangeal joints. Forward and inverse kinematics for both position and velocity have been solved using closed loop vector analysis by including human finger as an integral part of the system. For accurate force control, a cascaded control structure has been presented. Force controlled trajectories have been proposed to guide the finger along preprogrammed virtual paths. Such trajectories serve to gently guide the finger towards the correct rehabilitation protocol, thus acting as an effective replacement of intervention by a human therapist. Extensive computer simulations have been performed before fabricating a prototype and performing experimental validation. Results show accurate modeling and control of the proposed design.

A Cable-Driven Three-DOF Wrist Rehabilitation Exoskeleton With Improved Performance

This paper developed a cable-driven three-degree-of-freedom (DOF) wrist rehabilitation exoskeleton actuated by the distributed active semi-active (DASA) system. Compared with the conventional cable-driven robots, the workspace of this robot is increased greatly by adding the rotating compensation mechanism and by optimizing the distribution of the cable attachment points. In the meanwhile, the efficiency of the cable tension is improved, and the parasitic force (the force acting on the joint along the limb) is reduced. Besides, in order to reduce the effects of compliant elements (e.g., cables or Bowden cables) between the actuators and output, and to improve the force bandwidth, we designed the DASA system composed of one geared DC motor and four magnetorheological (MR) clutches, which has low output inertia. A fast unbinding strategy is presented to ensure safety in abnormal conditions. A passive training algorithm and an assist-as-needed (AAN) algorithm were implemented to control the exoskeleton. Several experiments were conducted on both healthy and impaired subjects to test the performance and effectiveness of the proposed system for rehabilitation. The results show that the system can meet the needs of rehabilitation training for workspace and force-feedback, and provide efficient active and passive training.

Design and testing of a soft parallel robot based on pneumatic artificial muscles for wrist rehabilitation

Wrist rehabilitation is needed to help post-stroke and post-surgery patients recover from wrist fracture or injury. Traditional rehabilitation training is conducted by a therapist in a hospital, which hinders timely treatment due to the corresponding time and space constraints. This paper presents the design and implementation of a soft parallel robot for automated wrist rehabilitation. The presented wrist rehabilitation robot integrates the advantages of both soft robot and parallel robot structures. Unlike traditional rigid-body based rehabilitation robots, this soft parallel robot exhibits a compact structure, which is highly secure, adaptable, and flexible and thus a low-cost solution for personalized treatment. The proposed soft wrist-rehabilitation robot is driven by six evenly distributed linear actuators using pneumatic artificial muscles and one central linear electric motor. The introduced parallel-kinematic mechanism design enables the enhancement of the output stiffness of the soft robot for practical use. An electromyography sensor is adopted to provide feedback signals for evaluating the rehabilitation training process. A kinematic model of the designed robot is derived, and a prototype is fabricated for experimental testing. The results demonstrate that the developed soft rehabilitation robot can assist the wrist to realize all the required training motions, including abduction-adduction, flexion-extension, and supination-pronation. The compact and lightweight structure of this novel robot makes it convenient to use, and suitable rehabilitation training modes can be chosen for tailored rehabilitation at home or in a hospital.

A domestic robotic rehabilitation device for assessment of wrist function for outpatients

Introduction

Available robot-assisted stroke rehabilitation systems are often limited in their utilization in the home environment, due to several barriers such as high cost, absence of therapists, tedious training tasks, or encumbering interfaces. This paper presents a low-cost robotic rehabilitation and assessment device for restoring wrist function, offering wrist exercises incorporating pronation-supination and flexion-extension movements. Furthermore, the device is designed for the assessment of joint stiffness of the wrist, and range of motion in two degrees of freedom. Methods: Mechanical/electrical design of the device as well as the control system is described. A preliminary evaluation focused on the measurement of the torsional stiffness of the limb is presented. It is evaluated by reconstructing the known stiffness values of torsional springs by measuring the motor current required to displace them.

Results

The device demonstrates the ability to determine the stiffness of an object with low-cost hardware. Use case scenarios of the device for training and assessment of the wrist are presented, allowing for a range of motion of ± 75 ° and ± 65 ° , for pronation-supination and flexion-extension respectively.

Conclusion

The device shows potential to help objectively quantify the stiffness of the wrist movement, which consecutively could be used to represent and quantify the degree of impairment of patients after stroke in a more objective manner. Further clinical study is necessary to examine this.

A fairly simple mechatronic device for training human wrist motion

This article proposes a novel device for wrist motion rehabilitation. The proposed mechatronic architecture is based on a simple user-friendly design, which includes a mobile platform for hand support, which is operated by a single actuator. A dedicated assist-as-needed control is designed to operate the device for the required movements. The proposed control strategy is also integrated into a gaming software for stimulating the exercising by means of various interactions with patients. Experimental tests are carried out with 14 healthy subjects at the Physiotherapy Clinical Hospital of the Federal University of Uberlandia. Also, three patients with stroke have been enrolled in a pilot clinical testing. Each of the patients has been involved in four sessions per month with 15 min of assisted treatment. Results of experimental tests are analyzed in terms of improvements and amplitude gains for the flexion and extension wrist movements. Experimental results are reported as evidence for the feasibility and soundness of the proposed device as a tool to assist professionals in procedures of wrist rehabilitation.