Preparation of Silica-Based Superficially Porous Silica and its Application in Enantiomer Separations: a Review

Modification of Silica with Sucrose and Ammonium Fluoride Agents: A Facile Route to Prepare Supports of Iridium Catalysts for Hydrogenation Reaction

Mesoporous silica materials were synthesized using inexpensive and environmentally friendly sucrose as a porogeneous agent. It was found that the presence of sucrose and the products of its chemical transformation during synthesis (e.g., furfural polymer) significantly affected the structure of the obtained porous silica. The influence of synthesis conditions (pH, temperature, time) on the textural properties of the final materials was determined. Samples obtained in an acidic medium, at pH = 1, and treated at room temperature, yielded products with a large surface area and a narrow pore size distribution in the range of 2-5 nm, while the synthesis at pH = 8 allowed for the formation of mesoporous systems with pores in the range of 14-20 nm. To generate acidity, the silicas were modified with an ammonium fluoride solution and then used as supports for iridium catalysts in a hydrogenation reaction, with toluene as a model hydrocarbon. The influence of parameters such as specific surface area, support acidity, and iridium dispersion on catalytic activity was determined. It was shown that modification with sucrose improved the porous structure, and NH4F modification generated acidity. These parameters favored better reducibility and dispersion of the active phase, resulting in higher activity of the catalysts in the studied hydrogenation reaction.

Histidine-modified pillar[5]arene-functionalized mesoporous silica materials for highly selective enantioseparation

Chiral enantiomers, especially the enantiomers of chiral drugs often exhibit different pharmacological activity, metabolism and toxicity, thus it is of great research significance to scientifically and reasonably develop single chiral drugs with low toxicity and high efficiency. Among them, high performance liquid chromatographic techniques based on chiral stationary phases (CSPs) has become one of the most attractive methods used to evaluate the enantiomeric purity of single-enantiomers compound of pharmacological relevance. In this work, pillar[5]arene functionalized with L- and D-histidine, respectively, were modified on the surface of mesoporous silica as novel chiral stationary phases called L/DHis-BP5-Sil. Notably, L/D-histidine had the characteristics of low steric hindrance and easy derivatization. Although the π-π interaction of imidazole group was weaker than that of benzene ring, the benzene ring bonding imidazole-conjugated ring in the structure produced better enantioseparation effect. The results showed that L/DHis-BP5-Sil can separate a variety of complex structural enantiomers with excellent reproducibility, thermal stability and separation performance. Hence, the unique advantage of the highly selective separation of L/DHis-BP5-Sil provides new insights into the enantioseparation field.

Recent advances in chiral liquid chromatography stationary phases for pharmaceutical analysis

Chirality is a common phenomenon in nature. Different enantiomers of chiral drug compounds have obvious differences in their effects on the human body. Therefore, the separation of chiral drugs plays an extremely important role in the safe utilization of drugs. High-performance liquid chromatography (HPLC) is an effective tool for the separation and analysis of compounds, in which the chromatographic packing plays a key role in the separation. Chiral pharmaceutical separation and analysis in HPLC rely on chiral stationary phases (CSPs). Thus, various CSPs are being developed to meet the needs of chiral drug separation and analysis. In this review, recent developments in CSPs, including saccharides (cyclodextrin, cellulose, amylose and chitosan), macrocycles (macrocyclic glycopeptides, pillar[n]arene and polyamide) and porous organic materials (metal-organic frameworks, covalent organic frameworks, and porous organic cages), for pharmaceutical analysis in HPLC were summarized, the advantages and disadvantages of various stationary phases were introduced, and their development prospects were discussed.

Recent advances in chiral selectors immobilization and chiral mobile phase additives in liquid chromatographic enantio-separations: A review

For decades now, the separation of chiral enantiomers of drugs has been gaining the interest and attention of researchers. In 1991, the first guidelines for development of chiral drugs were firstly released by the US-FDA. Since then, the development in chromatographic enantioseparation tools has been fast and variable, aiming at creating a suitable environment where the physically and chemically identical enantiomers can be separated. Among those tools, the immobilization of chiral selectors (CS) on different stationary phases and the chiral mobile phase additives (CMPA) which have been progressed and studied extensively. This review article highlights the major advances in immobilization of CS together with their different recognition mechanisms as well as CMPA as a cheaper and successful alternative for chiral stationary phases. Moreover, the role of molecular modeling tool as a pre-step in the choice of CS for evaluating possible interactions with different ligands has been pointed up. Illustrations of reported methods and updates for immobilized CS and CMPA have been included.

Grafting of Tetraphenylethylene on Silica Surface, Characterizations, and Their Chromatographic Performance as Reversed-Phase Stationary Phases

Surface modification is an effective way to functionalize the materials so as to get some special properties. Tetraphenylethylene (TPE) has been widely investigated as a well-known reagent which has the nature of aggregation-induced emission (AIE), but has never been reported in the liquid chromatography stationary phase. In this work, TPE-grafted silica (Sil-TPE) was obtained successfully using the derivative of 1-(4-hydroxyphenyl)-1,2,2-triphenylethylene as a ligand, and then characterized by elemental analysis, Fourier transform infrared spectra, thermogravimetric analysis, and so forth. Laser scanning confocal microscopy images reflected the AIE phenomenon of grafted TPE because the internal vibration and rotation of TPE molecules were restrained in the confined silica space. The contact angle test showed superhydrophobic properties of Sil-TPE. In order to understand thoroughly the mechanism of chromatographic performance and retention behavior for Sil-TPE, Tanaka test mixture, alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), and phenols were separated. This reveals that Sil-TPE has strong aromaticity and certain shape selectivity, especially, has excellent separation performance for PAHs and phenols. The thermodynamic properties and repeatability of Sil-TPE were further studied, which showed the stability of Sil-TPE. This work shows that TPE can be successfully grafted on silica surface and it has the potential to be a new kind of promising stationary phases in the future.

Phosphorus-doped deep eutectic solvent-derived carbon dots-modified silica as a mixed-mode stationary phase for reversed-phase and hydrophilic interaction chromatography

In this work, phosphorus-doped carbon dots (P-DESCDs) were successfully prepared using choline chloride/lactic acid type deep eutectic solvent and phosphoric acid as ingredients, and (3-aminopropyl) trimethoxysilane was used as a bridge to graft P-DESCDs onto the silica surface to obtain a new mixed-mode stationary phase (Sil-P-DESCDs) for reversed-phase and hydrophilic interaction liquid chromatography. The successful preparation of the stationary phase was confirmed by laser scanning confocal microscopy, elemental analysis, and Fourier transform infrared spectrometry. Interestingly, the doping of phosphorus greatly improved the separation performance and hydrophilicity of the Sil-P-DESCDs column. The Sil-P-DESCDs column was found to have certain hydrophobicity, hydrogen bonding ability and shape selectivity by Tanaka and Engelhardt standard test mixtures, and a series of hydrophilic and hydrophobic compounds such as alkylbenzenes, polycyclic aromatic hydrocarbons, sulfonamides, aromatic amines, phenols, flavonoids, nucleoside bases, and alkaloids. In addition, the effects of mobile phase ratio, column temperature, flow rate, salt concentration, and pH on the retention of analytes on Sil-P-DESCDs columns were investigated. Finally, the Sil-P-DESCDs column was applied to the qualitative and quantitative analysis of calcein-7-glucoside in the real sample of medicinal Astragalus pellets, and it was found at a concentration of 0.02 mg/mL.

Deep eutectic solvents-derivated carbon dots-decorated silica stationary phase with enhanced separation selectivity in reversed-phase liquid chromatography

In this work, deep eutectic solvents-based carbon dots (DESCDs) were prepared and bonded to the silica surface for the first time to form a new hydrophobic chromatographic stationary phase (Sil-DESCDs). The successful preparation of DESCDs and Sil-DESCDs were demonstrated by a series of characterizations including transmission electron microscopies, laser scanning confocal microscope, Fourier transform infrared spectrometry, elemental analysis, etc. Retention behavior of Sil-DESCDs was evaluated using Tanaka and Engelhardt standard test mixtures. The results showed that this new stationary phase had excellent separation performance for polycyclic aromatic hydrocarbons, flavonoids, aromatic amines and phenolic compounds. Excellent separation selectivity for the 3-phenylene ring isomers including phenanthrene and anthracene, the 4-phenylene ring isomers including pyrene, triphenylene, chrysene and 1,2-benzanthracene was also obtained. Especially, prednisolone and hydrocortisone, which have very similar structures, can be separated using pure water as the mobile phase. In addition, the flavonoids in Astragalus extracts including calycosin-7-glucoside, ononin, calycosin and formononetin were determined using this new column, their concentrations were 0.050, 0.031, 0.023 and 0.034 mg/mL, respectively.

Metal-organic frameworks in chiral separation of pharmaceuticals

Stereoselective chiral molecules are responsible for specific biological functions in nature. At present, more than half of the prescribed drugs are chiral. Living organisms display divergent pharmacological responses to the enantiomers, leading to altered toxicity, pharmacokinetics, and pharmacodynamics. Thus, chiral analysis, separation, and extraction are crucial for ensuring enantiomeric purity to develop safe and effective medication. In recent times, metal-organic frameworks (MOFs) with appealing structures are gaining importance because of their fascinating properties as a sorbent and stationary phase. MOFs are crystalline porous solid materials built by interconnecting metal ions or clusters and organic linkers. This review explores the advancements in MOFs for the isolation and separation of chiral active pharmaceutical drugs.

Comparison of chromatographic performance of co-grafted silica using octadecene respectively with vinylpyrrolidone, vinylimidazole and vinylpyridine

Three reversed-phase liquid chromatography (RPLC) stationary phases were obtained by using long-chain 1-octadecene (OD) co-grafted with three short-chain monomers, including N-vinylpyrrolidone (NVP), 1-vinylimidazole (VIm) and 4-vinylpyridine (VPy), respectively (noted as Sil@ODNVP, Sil@ODVIm and Sil@ODVPy). Peak broadening phenomenon in RPLC mode which resulted by short-chain was examined carefully. Compared with Sil@ODNVP, both of Sil@ODVIm and Sil@ODVPy had smaller peak width and higher column efficiency in the separation of 10 polycyclic aromatic hydrocarbons (PAHs), 7 alkyl benzenes, 7 aromatic acids, 7 aromatic esters and 9 phenols. In addition, VPy has the strongest ion exchange capacity than other two short-chains. In this case, we can see that VPy and VIm maybe more suitable to be used as functional monomeric modifiers of new chromatographic stationary phases.