3D printing of calcium phosphate bioceramic with tailored biodegradation rate for skull bone tissue reconstruction

3D Printed Calcium Phosphate Physiochemically Dual-Regulating Pro-Osteogenesis and Antiosteolysis for Enhancing Bone Tissue Regeneration

Osteoblasts and osteoclasts are two of the most important types of cells in bone repair, and their bone-forming and bone-resorbing activities influence the process of bone repair. In this study, we proposed a physicochemical bidirectional regulation strategy via ration by physically utilizing hydroxyapatite nanopatterning to recruit and induce MSCs osteogenic differentiation and by chemically inhibiting osteolysis activity through the loaded zoledronate. The nanorod-like hydroxyapatite coating was fabricated via a modified hydrothermal process while the zoledronic acid was loaded through the chelation within the calcium ions. The fabrication of a hydroxyapatite/zoledronic acid composite biomaterial. This biomaterial promotes bone tissue regeneration by physically utilizing hydroxyapatite nanopatterning to recruit and induce MSCs osteogenic differentiation and by chemically inhibiting osteolysis activity through the loaded zoledronate. The nanorod-like hydroxyapatite coating was fabricated via a modified hydrothermal process while the zoledronic acid was loaded through the chelation within the calcium ions. The in vitro results tested on MSCs and RAW 246.7 indicated that the hydroxyapatite enhanced cells' physical sensing system, therefore enhancing the osteogenesis. At the same time the zoledronic acid inhibited osteolysis by downregulating the RANK-related genes. This research provides a promising strategy for enhancing bone regeneration and contributes to the field of orthopedic implants.

Influence of physicochemical characteristics of calcium phosphate-based biomaterials in cranio-maxillofacial bone regeneration. A systematic literature review and meta-analysis of preclinical models

Objectives

Calcium phosphate-based biomaterials (CaP) are the most widely used biomaterials to enhance bone regeneration in the treatment of alveolar bone deficiencies, cranio-maxillofacial and periodontal infrabony defects, with positive preclinical and clinical results reported. This systematic review aimed to assess the influence of the physicochemical properties of CaP biomaterials on the performance of bone regeneration in preclinical animal models.

Methods

The PubMed, EMBASE and Web of Science databases were searched to retrieve the preclinical studies investigating physicochemical characteristics of CaP biomaterials. The studies were screened for inclusion based on intervention (physicochemical characterization and in vivo evaluation) and reported measurable outcomes.

Results

A total of 1532 articles were retrieved and 58 studies were ultimately included in the systematic review. A wide range of physicochemical characteristics of CaP biomaterials was found to be assessed in the included studies. Despite a high degree of heterogeneity, the meta-analysis was performed on 39 studies and evidenced significant effects of biomaterial characteristics on their bone regeneration outcomes. The study specifically showed that macropore size, Ca/P ratio, and compressive strength exerted significant influence on the formation of newly regenerated bone. Moreover, factors such as particle size, Ca/P ratio, and surface area were found to impact bone-to-material contact during the regeneration process. In terms of biodegradability, the amount of residual graft was determined by macropore size, particle size, and compressive strength.

Conclusion

The systematic review showed that the physicochemical characteristics of CaP biomaterials are highly determining for scaffold's performance, emphasizing its usefulness in designing the next generation of bone scaffolds to target higher rates of regeneration.

Mn Single-Atom Nanozyme Functionalized 3D-Printed Bioceramic Scaffolds for Enhanced Antibacterial Activity and Bone Regeneration

Infective bone defect is increasingly threatening human health. How to achieve the optimal antibacterial activity and regenerative repair of infective bone defect simultaneously is a huge challenge in clinic. Herein, this work reports a rational integration of Mn single-atom nanozyme into the 3D-printed bioceramic scaffolds (Mn/HSAE@BCP scaffolds). The integrated Mn/HSAE@BCP scaffolds can catalyze the conversion of H2O2 to produce hydroxyl radical (•OH) and superoxide anion (O2 •-) through cascade reaction. Besides, the prominent thermal conversion efficiency of Mn/HSAE@BCP scaffolds can be utilized for sonodynamic therapy (SDT). The synergetic strategy of chemodynamic therapy (CDT)/SDT enables the sufficient generation of reactive oxygen species (ROS) to kill Staphylococcus aureus (S. aureus) or Escherichia coli (E. coli). Furthermore, the enhanced antibacterial efficacy of Mn/HSAE@BCP scaffolds is beneficial to upregulate the expression of osteogenesis-related markers (such as collagen 1(COL1), Runt-related transcription factor 2 (Runx2), osteocalcin (OCN), and osteoprotegerin (OPG)) in vitro and further promote bone regeneration in vivo. The results demonstrate the good potential of Mn/HSAE@BCP scaffolds for the enhanced antibacterial activity and bone regeneration, which provide an effective method for the treatment of clinical infective bone defect.

3D printing of customized bioceramics for promoting bone tissue regeneration by regulating sympathetic nerve behavior

Numerous studies have shown that there are multiple neural activities involved in the process of bone resorption and bone regeneration, and promoting osteogenesis by promoting neural network reconstruction is an effective strategy for repairing critical size bone defects. However, traumatic bone defects often cause activation of the sympathetic nervous system (SNS) in the damaged area, releasing excess catecholamines (CAs), resulting in a decrease in the rate of bone formation. Herein, a 3D-printed scaffold loaded with propranolol (PRN) is proposed to reduce CA concentrations in bone defect areas and promote bone regeneration through drug release. For this purpose, PRN-loaded methacrylated gelatin (GelMA) microspheres were mixed with low-concentration GelMA and perfused into a 3D-printed porous hydroxyapatite (HAp) scaffold. By releasing PRN, which can block β-adrenergic receptors, it hinders the activation of sympathetic nerves and inhibits the release of excess CA by the SNS. At the same time, the composite scaffold recruits bone marrow mesenchymal stem cells (BMSCs) and promotes the differentiation of BMSCs in the direction of osteoblasts, which effectively promotes bone regeneration in the rabbit femoral condyle defect model. The results of the study showed that the release of PRN from the composite scaffold could effectively hinder the activation of sympathetic nerves and promote bone regeneration, providing a new strategy for the treatment of bone defects.

3D printed strontium-doped calcium phosphate ceramic scaffold enhances early angiogenesis and promotes bone repair through the regulation of macrophage polarization

The vascularization of bone repair materials is one of the key issues that urgently need to be addressed in the process of bone repair. The changes in macrophage phenotype and function play an important role in the process of vascularization, and endowing bone repair materials with immune regulatory characteristics to enhance angiogenesis is undoubtedly a new strategy to improve the effectiveness of bone repair. In order to improve the effect of tricalcium phosphate (TCP) on vascularization and bone repair, we doped strontium ions (Sr) into TCP (SrTCP) and prepared porous 3D printed SrTCP scaffolds using 3D printing technology, and studied the scaffold mediated macrophage polarization and subsequent vascularization and bone regeneration. The results of the interaction between the scaffold and macrophages showed that the SrTCP scaffold can promote the polarization of macrophages from M1 to M2 and secrete high concentrations of VEGF and PDGF-bb cytokines, which shows excellent angiogenic potential. When human umbilical vein endothelial cells (HUVECs) were co-cultured with macrophage-conditioned medium of SrTCP scaffold, HUVECs exhibited excellent early angiogenesis-promoting effects in terms of scratch healing, angiogenic gene expression, and in vitro tube formation performance. The results of in vivo bone repair experiments showed that the SrTCP scaffold formed a vascular network with high density and quantity in the bone defect area, which could increase the rate of new bone formation and advance the period of bone formation, and finally achieved a better bone repair effect. We observed a cascade effect in which Sr-doped SrTCP scaffold regulate macrophage polarization to enhance angiogenesis and promote bone repair, which may provide a new strategy for the repair of clinical bone defects.

Effect of Mechanical Loading on Bone Regeneration in HA/β-TCP/SF Scaffolds Prepared by Low-Temperature 3D Printing In Vivo

It has been well demonstrated that a dynamic culture environment improves tissue-engineered bone formation in vitro, but little is known about how cyclical mechanical loading induced bone formation in scaffolds in situ. To mimic the organic and inorganic components and multilevel structure of a bony microenvironment, hydroxyapatite/β tricalcium phosphate/silk fibroin(HA/β-TCP/SF) composite scaffolds with macro- and micropores were fabricated in this study. The mechanical properties and structure of the scaffolds were adjusted based on the ratio of organic and inorganic components and three-dimensional (3D) printing parameters. Dynamic sinusoidal loading with different frequencies was applied to the composite scaffold. Mouse bone precursor cells MC3T3-E1 were seeded on the scaffolds, and the cell compatibility of the scaffolds was investigated by MTT, SEM, and HE. The effect of the loading on bone formation in the scaffold in situ was investigated in a rabbit tibia defect model. The scaffold showed viscoelasticity and hysteresis under dynamic sinusoidal loading with different frequencies. With an increase in HA/β-TCP, the stress and modulus of the scaffolds increased. MTT, SEM, and HE results showed that MC3T3-E1 cells could adhere and proliferate on the composite scaffolds. After loading in vivo, the quantity of newly formed bone and the bone volume fraction increased. Micro-CT, undecalcified Van Gieson (VG) staining, and fluorescent double-labeling results suggested that appropriate cyclical mechanical loading at frequencies of 1 and 10 Hz had positive effects on bone formation in situ and it may play a role in clinical bone defect repair.

Research on Cartilage 3D Printing Technology Based on SA-GA-HA

Cartilage damage is difficult to heal and poses a serious problem to human health as it can lead to osteoarthritis. In this work, we explore the application of biological 3D printing to manufacture new cartilage scaffolds to promote cartilage regeneration. The hydrogel made by mixing sodium alginate (SA) and gelatin (GA) has high biocompatibility, but its mechanical properties are poor. The addition of hydroxyapatite (HA) can enhance its mechanical properties. In this paper, the preparation scheme of the SA-GA-HA composite hydrogel cartilage scaffold was explored, the scaffolds prepared with different concentrations were compared, and better formulations were obtained for printing and testing. Mathematical modeling of the printing process of the bracket, simulation analysis of the printing process based on the mathematical model, and adjustment of actual printing parameters based on the results of the simulation were performed. The cartilage scaffold, which was printed using Bioplotter 3D printer, exhibited useful mechanical properties suitable for practical needs. In addition, ATDC-5 cells were seeded on the cartilage scaffolds and the cell survival rate was found to be higher after one week. The findings demonstrated that the fabricated chondrocyte scaffolds had better mechanical properties and biocompatibility, providing a new scaffold strategy for cartilage tissue regeneration.

3D printed PEKK bone analogs with internal porosity and surface modification for mandibular reconstruction: An in vivo rabbit model study

Polyetheretherketone (PEEK) and its derivative polyetherketoneketone (PEKK) have been used as implant materials for spinal fusing and enjoyed their success for many years because of their mechanical properties similar to bone and their chemical inertness. The osseointegration of PEEKs is datable. Our strategy was to use custom-designed and 3D printed bone analogs with an optimized structure design and a modified PEKK surface to augment bone regeneration for mandibular reconstruction. Those bone analogs had internal porosities and a bioactive titanium oxide surface coating to promote osseointegration between native bone and PEKK analogs. Our workflow was 3D modeling, bone analog designing, structural optimization, mechanical analysis via finite element modeling, 3D printing of bone analogs and subsequently, an in vivo rabbit model study on mandibular reconstruction and histology evaluation. Our results showed the finite element analysis validated that the porous PEKK analogs provided a mechanical-sound structure for functional loadings. The bone analogs offered a perfect replacement for segmented bones in the terms of shape, form and volume for surgical reconstruction. The in vivo results showed that bioactive titanium oxide coating enhanced new bone in-growth into the porous PEKK analogs. We have validated our new approach in surgical mandibular reconstruction and we believe our strategy has a significant potential to improve mechanical and biological outcomes for patients who require mandibular reconstruction procedures.

Study on the influence of scaffold morphology and structure on osteogenic performance

The number of patients with bone defects caused by various bone diseases is increasing yearly in the aging population, and people are paying increasing attention to bone tissue engineering research. Currently, the application of bone tissue engineering mainly focuses on promoting fracture healing by carrying cytokines. However, cytokines implanted into the body easily cause an immune response, and the cost is high; therefore, the clinical treatment effect is not outstanding. In recent years, some scholars have proposed the concept of tissue-induced biomaterials that can induce bone regeneration through a scaffold structure without adding cytokines. By optimizing the scaffold structure, the performance of tissue-engineered bone scaffolds is improved and the osteogenesis effect is promoted, which provides ideas for the design and improvement of tissue-engineered bones in the future. In this study, the current understanding of the bone tissue structure is summarized through the discussion of current bone tissue engineering, and the current research on micro-nano bionic structure scaffolds and their osteogenesis mechanism is analyzed and discussed.

Combined Application of Dentin Noncollagenous Proteins and Odontogenic Biphasic Calcium Phosphate in Rabbit Maxillary Sinus Lifting

BACKGROUND

Teeth can be used as a raw material for preparing bone substitutes due to their similar chemical composition to bone. The objective of our study was to evaluate the effect of odontogenic biphasic calcium phosphate (BCP) incorporating dentin noncollagenous proteins (DNCPs) on osteogenesis and stability in maxillary sinus augmentation.

METHODS

The composition, structure and morphology of the odontogenic BCP were tested by X-ray powder diffraction (XRD), Brunauer-Emmett-Teller, and scanning electron microscopy methods. The biocompatibility and osteoinduction of DNCPs and materials were examined in vitro and their bone regeneration capacity was verified in vivo.

RESULTS

The results showed that the cells adhered and proliferated well on the DNCP-loaded BCP scaffold. The odontogenic BCP and DNCPs promoted osteogenic differentiation of cells, The new bone formation in the BCP groups and DNCP subgroups was significantly higher than the new bone formation in the control, and the new bone quality was better. The bone regeneration effect of odontogenic BCP was similar to the effect of deproteinized bovine bone mineral, but β-TCP did not maintain the height and volume of bone reconstruction.

CONCLUSION

In conclusion, the combined application of DNCPs and odontogenic BCP is an effective strategy for tissue engineering osteogenesis in the maxillary sinus region. The biomimetic strategy could provide a new approach for patients requiring maxillary sinus lifting.

Biofabricating the vascular tree in engineered bone tissue

The development of tissue engineering strategies for treatment of large bone defects has become increasingly relevant, given the growing demand for bone substitutes. Native bone is composed of a dense vascular network necessary for the regulation of bone development, regeneration and homeostasis. A major obstacle in fabricating living, clinically relevant-sized bone mimics (1-10 cm³) is the limited supply of nutrients, including oxygen to the core of the construct. Therefore, strategies to support vascularization are pivotal for the development of tissue engineered bone constructs. Creating a functional bone construct integrated with a vascular network, capable of delivering the necessary nutrients for optimal tissue development is imperative for translation into the clinics. The vascular system is composed of a complex network that runs throughout the body in a tree-like hierarchical branching fashion. A significant challenge for tissue engineering approaches lies in mimicking the intricate, multi-scale structures consisting of larger vessels (macro-vessels) which interconnect with multiple sprouting vessels (microvessels) in a closed network. The advent of biofabrication has enabled complex, out of plane channels to be generated and has laid the groundwork for the creation of multi-scale vasculature in recent years. This review highlights the key state-of-the-art achievements for the development of vascular networks of varying scales in the field of biofabrication with a particular focus for its application in developing a functional tissue engineered bone construct. STATEMENT OF SIGNIFICANCE: There is a growing need for bone substitutes to overcome the limited supply of patient-derived bone. Bone tissue engineering aims to overcome this by combining stem cells with scaffolds to restore missing bone. The current bottleneck in upscaling is the lack of an integrated vascular network, required for the delivery of nutrients to cells. 3D bioprinting techniques has enabled the creation of complex hollow structures of varying dimensions that resemble native blood vessels. The convergence of multiple materials, cell types and fabrication approaches, opens the possibility of developing clinically-relevant sized vascularized bone constructs. This review provides an up-to-date insight of the technologies currently available for the generation of complex vascular networks, with a focus on their application in bone tissue engineering.

Calcium Phosphate-Based Biomaterials for Bone Repair

Traumatic, tumoral, and infectious bone defects are common in clinics, and create a big burden on patient's families and society. Calcium phosphate (CaP)-based biomaterials have superior properties and have been widely used for bone defect repair, due to their similarities to the inorganic components of human bones. The biological performance of CaPs, as a determining factor for their applications, are dependent on their physicochemical properties. Hydroxyapatite (HAP) as the most thermally stable crystalline phase of CaP is mostly used in the form of ceramics or composites scaffolds with polymers. Nanostructured CaPs with large surface areas are suitable for drug/gene delivery systems. Additionally, CaP scaffolds with hierarchical nano-/microstructures have demonstrated excellent ability in promoting bone regeneration. This review focuses on the relationships and interactions between the physicochemical/biological properties of CaP biomaterials and their species, sizes, and morphologies in bone regeneration, including synthesis strategies, structure control, biological behavior, and the mechanisms of CaP in promoting osteogenesis. This review will be helpful for scientists and engineers to further understand CaP-based biomaterials (CaPs), and be useful in developing new high-performance biomaterials for bone repair.

Dopamine/DOPAC-assisted immobilization of bone morphogenetic protein-2 loaded Heparin/PEI nanogels onto three-dimentional printed calcium phosphate ceramics for enhanced osteoinductivity and osteogenicity

Nowadays, the three-dimensional (3D) printed calcium phosphate (CaP) ceramics have well-designed geometric structure, but suffer from relative weak osteoinductivity. Surface modification by incorporating bone morphogenetic protein-2 (BMP2) onto scaffolds is considered as an efficient approach to improve their bioactivity. However, high dose and uncontrolled burst release of BMP2 may cause undesired side effect. In the present study, porous BCP ceramics with inverse face-centred cube structure prepared by digital light processing (DLP)-based 3D printing technique were used as the substrates. BMP2 proteins were loaded in the self-assembled Heparin/PEI nanogels (NP/BMP2), and then immobilized onto BCP substrates through the intermediate mussel-derived bioactive dopamine and dihydroxyphenylacetic acid (DA/DOPAC) coating layers to construct functional BCP/layer/NP/BMP2 scaffolds. Our results showed that Heparin/PEI nanogel was a potent delivery system for BMP2, and BCP/layer/NP/BMP2 scaffolds exhibited the high loading capacity, controlled release rate, and sustained local delivery of BMP2. In vitro cell experiments with bone marrow stromal cells (BMSCs) found that BCP/layer/NP/BMP2 could promote cell proliferation, facilitate cell spreading, accelerate cell migration, up-regulate expression of osteogenic genes, and improve synthesis of osteoblast-related proteins. Moreover, the murine intramuscular implantation model suggested that BCP/layer/NP/BMP2 had a superior osteoinductive capacity, and the rat femoral condyle defect repair model showed that BCP/layer/NP/BMP2 could enhance in situ bone repair and regeneration. These findings demonstrate that the incorporation of BMP2 loaded Heparin/PEI nanogels to 3D printed scaffolds holds great promise in fabricating bone graft with a superior biological performance for orthopedic application.

Comparison of off-the-shelf β-tricalcium phosphate implants with novel resorbable 3D printed implants in mandible ramus of pigs

Facial reconstructive surgery has already implemented the use of 3D printed Patient Specific Implants derived from CAD/CAM-based technologies as an alternative to preformed bone graft substitutes. 3D-printed patient-specific implants derived from CAD/CAM-based technologies are used in facial reconstructive surgery as an alternative to preformed bone graft substitutes. However, to minimize the invasiveness and long-term adverse effects of surgical interventions, the implant needs to exhibit exact fitting, porosity, density, and volume and be made from resorbable materials that allow ingrowth and formation of new bone tissue. Therefore, we present this pilot study using 3D-printed implants consisting of pure β-TCP, produced using a novel technique that assures these properties. Eight pigs received 3D-printed truncated porous cone bone implants paired with either an off-the-shelve a chronOS (DePuy Synthes chronOS Vivify Preforms) preformed block (n = 4) or a no-implant void (n = 4) in a surgically created defect on each side of the angle of the mandible. After 6 months, CT data showed that all 3D-printed implants performed as well as did the off-the-shelve implants, with predicted osteointegration medially and laterally and with minimal gapping between the implants and native bone. The CT findings were confirmed by histological analysis that revealed that the 3D-printed implants together with the off-the-shelve implants were almost complete resorbed. Much of the resorbed volume had been replaced by vascularized compact bone, and fusion between newly formed bone and native bone was observed in all implants, further indicating that the 3D-printed implants and off-the-shelve implants performed equally well. Only soft tissue developed in the void control sites. Further studies are needed to confirm these initial findings.

Ultra-low binder content 3D printed calcium phosphate graphene scaffolds as resorbable, osteoinductive matrices that support bone formation in vivo

Bone regenerative engineering could replace autografts; however, no synthetic material fulfills all design criteria. Nanocarbons incorporated into three-dimensional printed (3DP) matrices can improve properties, but incorporation is constrained to low wt%. Further, unmodified nanocarbons have limited osteogenic potential. Functionalization to calcium phosphate graphene (CaPG) imparts osteoinductivity and osteoconductivity, but loading into matrices remained limited. This work presents ultra-high content (90%), 3DP-CaPG matrices. 3DP-CaPG matrices are highly porous (95%), moderately stiff (3 MPa), and mechanically robust. In vitro, they are cytocompatible and induce osteogenic differentiation of human mesenchymal stem cells (hMSCs), indicated by alkaline phosphatase, mineralization, and COL1α1 expression. In vivo, bone regeneration was studied using a transgenic fluorescent-reporter mouse non-union calvarial defect model. 3DP-CaPG stimulates cellular ingrowth, retains donor cells, and induces osteogenic differentiation. Histology shows TRAP staining around struts, suggesting potential osteoclast activity. Apparent resorption of 3DP-CaPG was observed and presented no toxicity. 3DP-CaPG represents an advancement towards a synthetic bone regeneration matrix.

A 3D-printed biphasic calcium phosphate scaffold loaded with platelet lysate/gelatin methacrylate to promote vascularization

3D-printed biphasic calcium phosphate (BCP) scaffolds show great clinical application potential in bone tissue engineering; however, vascularization of the scaffold is a crucial step for bone regeneration and is still difficult to be controlled. To enhance scaffold vascularization, a novel bioactive scaffold loaded with platelet lysate/gelatin methacrylate (PL/GelMA) in a BCP scaffold was proposed for promoting vascularization. The PL/GelMA/BCP scaffold was successfully prepared via digital light processing (DLP) printing and filled with PL/GelMA to promote the vascularization effect. In vitro evaluation indicated that human umbilical vein endothelial cells (HUVECs) adhered well on the PL/GelMA/BCP scaffold, and cell proliferation was significantly promoted by coculture with the scaffold. Moreover, a variety of growth factors (GFs) in the PL were detected which were slowly released from the scaffold to modulate the cell behaviour and promote the formation of blood vessel-like structures. Co-culturing with the PL/GelMA/BCP scaffold upregulated the expression of angiogenesis-related genes in cells. In vitro results showed that a higher capillary formation was also observed in PL/GelMA/BCP scaffolds implanted subcutaneously on the back of the rats. These results indicated that the vascularization ability of BCP was enhanced by filling it with PL/GelMA. The PL/GelMA/BCP scaffold has the potential to promote vascularization in tissue engineering.

Apoptotic cells derived micro/nano-sized extracellular vesicles in tissue regeneration

Extracellular vesicles (EVs), products released by cells in multiple biological activities, are currently widely accepted as functional particles and intercellular communicators. From the orthodox perspective, EVs derived from apoptotic cells (apoEVs) are responsible for cell debris clearance, while recent studies have demonstrated that apoEVs participate in tissue regeneration. However, the underlying mechanisms and particular functions in tissue regeneration promotion of apoEVs remain ambiguous. Some molecules, such as caspases, active during apoptosis also function in tissue regeneration triggered by apoptosis,. ApoEVs are generated in the process of apoptosis, carrying cell contents to manifest biological effects, and possessing biomarkers to target phagocytes. The regenerative effect of apoEVs might be due to their abilities to facilitate cell proliferation and regulate inflammation. Such regenerative effect has been observed in various tissues, including skin, bone, cardiovascular system, and kidney. Engineered apoEVs are produced to amplify the biological benefits of apoEVs, rendering them optional for drug delivery. Meanwhile, challenges exist in thorough mechanistic exploration and standardization of production. In this review, we discussed the link between apoptosis and regeneration, current comprehension of the origination and investigation strategies of apoEVs, and mechanisms in tissue regeneration by apoEVs and their applications. Challenges and prospects are also discussed here.

Three-Dimensional Printing of Large-Scale, High-Resolution Bioceramics with Micronano Inner Porosity and Customized Surface Characterization Design for Bone Regeneration

Three-dimensional printing technologies have opened up new possibilities for manufacturing bioceramics with complex shapes in a completely digital fabrication process. Some bioceramics have demonstrated elaborate design and high resolution in their small parts through digital light projection (DLP) printing. However, it is still a challenge to prepare large-scale, high-precision ceramics that can effectively regulate the bioactivity of materials. In this study, we fabricated a large-scale hydroxyapatite porous bioceramic (length >150 mm) using DLP. This bioceramic had highly micronanoporous surface structures (printing resolution <65 μm), which could be controlled by adjusting the solid content and sintering process. Both in vitro and in vivo results indicated that the designed bioceramic had promising bone regeneration ability. This study provides significant evidence for exploring the effects of microenvironments on bone tissue regeneration. These results indicated that DLP technology has the potential to produce large-scale bone tissue engineering scaffolds with accurate porosity.

The Study of Biological Glue Droplet Impact Behavior of Bioceramic Powders Applied in 3D Printing of Bone Scaffolds

This paper aims to develop a reliable and effective model to investigate the behavior of micron-sized biological glue droplets impacting micron-sized bioceramic powder beds applied to the 3D printing process. It also endeavours to explore the common rules of droplet impact affected by particle size and the wettability of powder, which are supposed to provide process parameters guidance for the application of new materials in 3D printing. Firstly, based on the low impulse impact model, the simplified model was proposed. Then, the observation and simulation experiments of millimeter-scale droplet impacting were carried out under the same conditions to prove the effectiveness of the model. Furthermore, the characterization of a parametric experiment of a 3D printing practice was used to verify the significance and effectiveness of the simulation study method. Lastly, the method was performed to investigate the effect of wettability and particle size of the micron powder on the micron droplet impact. The results showed that the binder powder’s wettability and particle size could directly influence the droplet spreading behavior. The characterization results of samples printed in the simulation-predicted parameter showed that the amount of binder used could be reduced by 38.8~50.1%, while the green strength only lost 17.9~20%. The significance of this simulation method for prediction of 3D printing process parameters was verified.

Fabrication of chitosan/alginate/hydroxyapatite hybrid scaffolds using 3D printing and impregnating techniques for potential cartilage regeneration

Three-dimensional (3D) printed hydrogel scaffolds enhanced with ceramics have shown potential applications for cartilage regeneration, but leaving biological and mechanical properties to be desired. This paper presents our study on the development of chitosan /alginate scaffolds with nano hydroxyapatite (nHA) by combining 3D printing and impregnating techniques, forming a hybrid, yet novel, structure of scaffolds for potential cartilage regeneration. First, we incorporated nHA into chitosan scaffold printing and studied the printability by examining the difference between the printed scaffolds and their designs. Then, we impregnated alginate with nHA into the printed chitosan scaffolds to forming a hybrid structure of scaffolds; and then characterized the scaffolds mechanically and biologically, with a focus on identifying the influence of nHA and alginate for potential cartilage regeneration. The results of compression tests on the scaffolds showed that the inclusion of nHA increased the elastic moduli of scaffolds; while the live/dead assay illustrated that nHA had a great effect on improving attachment and viability of ATCD5 cells on the scaffolds. Also, our results illustrated scaffolds with nHA impregnated in alginate hydrogel enhanced the cell viability and attachment. Furthermore, antibacterial activity of hybrid scaffolds was characterized with results indicating that the chitosan scaffolds had favourable antibacterial ability, which was further enhanced with the impregnated nHA. Taken together, our study has illustrated that chitosan/HA/alginate hybrid scaffolds are promising for cartilage regeneration and the methods developed to create hybrid scaffolds based on 3D printing and impregnating techniques, which can also be extended to fabricating scaffolds for other tissue engineering applications.

Mineralized collagen as a bioactive ink to support encapsulation of human adipose stem cells: A step towards the future of bone regeneration

Bioprinting - printing with incorporated living cells - has earned special attention on tissue engineering approaches, aiming to closer reproduce the 3D microenvironment of the target tissue. However, it raises extra complexity related to the need to use cell-friendly printing conditions that still comply with material printing fidelity. Inspired by the composite nano structural organization of mineralized tissues, this work reports the efficiency of the chemical approach followed to in situ mineralize blue shark skin collagen, at a nano scale level, to ultimately produce stable inks. The influence of initial cellular density was evaluated by assessing three different concentrations (2.5, 5 and 7.5 × 10⁶ cells·ml^-1) of human adipose stem cells (hASC), with the higher density of encapsulated cells presenting improved viability in a long culture term. Immunodetection of osteogenic-related markers, like RUNX2 and osteopontin, 21 days after cell culture in basal conditions confirmed the potential of the ink to be applied for osteogenic purposes, which may be associated with the success of the cell-to-ink interaction and the Ca²⁺ ions released from the co-precipitated hydroxyapatite. A combination of mineralized shark collagen, alginate and hASC is thus proposed as a bioactive bioink with potential properties for regeneration of bone tissue.

Hydroxyapatite coating on an aluminum/bioplastic scaffold for bone tissue engineering

Three-dimensional printing can produce scaffolds with shapes and dimensions tailored for practical clinical applications. Enhanced osteoconductivity of such scaffolds is generally desired. Hydroxyapatite (HA) is an inorganic ceramic that can be used to coat such scaffolds and to accelerate healing during the bone restoration process. In this study, HA-coated aluminum/bioplastic scaffolds were fabricated, and their structural characteristics and osteoconductivity were evaluated. Aluminum/bioplastic scaffolds were fabricated by three-dimensional printing, and HA slurries with solids loadings of 10–20 vol% were used for coating. As solids loadings increased, the thickness of the coating layers slightly increased, whereas pore sizes decreased. The average compressive strength was comparable to that of cancellous bone. Potential osteoconductivity was tested by simulated body fluid immersion for 28 days, and the formation of the HA phase on the surface along with a weight increase indicates the potential bioactivity of the samples.

Schematic representation of hydroxyapatite synthesis, 3D printing of Al/PLA scaffolds, and hydrothermal coating of the scaffolds. The best uniformity of coating and the greatest compressive strength were observed in samples coated with 10 vol% slurry.

Biomimetic Methacrylated Gelatin Hydrogel Loaded With Bone Marrow Mesenchymal Stem Cells for Bone Tissue Regeneration

Large-segment bone defect caused by trauma or tumor is one of the most challenging problems in orthopedic clinics. Biomimetic materials for bone tissue engineering have developed dramatically in the past few decades. The organic combination of biomimetic materials and stem cells offers new strategies for tissue repair, and the fate of stem cells is closely related to their extracellular matrix (ECM) properties. In this study, a photocrosslinked biomimetic methacrylated gelatin (Bio-GelMA) hydrogel scaffold was prepared to simulate the physical structure and chemical composition of the natural bone extracellular matrix, providing a three-dimensional (3D) template and extracellular matrix microenvironment. Bone marrow mesenchymal stem cells (BMSCS) were encapsulated in Bio-GelMA scaffolds to examine the therapeutic effects of ECM-loaded cells in a 3D environment simulated for segmental bone defects. In vitro results showed that Bio-GelMA had good biocompatibility and sufficient mechanical properties (14.22kPa). A rat segmental bone defect model was constructed in vivo. The GelMA-BMSC suspension was added into the PDMS mold with the size of the bone defect and photocured as a scaffold. BMSC-loaded Bio-GelMA resulted in maximum and robust new bone formation compared with hydrogels alone and stem cell group. In conclusion, the bio-GelMA scaffold can be used as a cell carrier of BMSC to promote the repair of segmental bone defects and has great potential in future clinical applications.

3D printing of bioinspired compartmentalized capsular structure for controlled drug release

Drug delivery with customized combinations of drugs, controllable drug dosage, and on-demand release kinetics is critical for personalized medicine. In this study, inspired by successive opening of layered structures and compartmentalized structures in plants, we designed a multiple compartmentalized capsular structure for controlled drug delivery. The structure was designed as a series of compartments, defined by the gradient thickness of their external walls and internal divisions. Based on the careful choice and optimization of bioinks composed of gelatin, starch, and alginate, the capsular structures were successfully manufactured by fused deposition modeling three-dimensional (3D) printing. The capsules showed fusion and firm contact between printed layers, forming complete structures without significant defects on the external walls and internal joints. Internal cavities with different volumes were achieved for different drug loading as designed. In vitro swelling demonstrated a successive dissolving and opening of external walls of different capsule compartments, allowing successive drug pulses from the capsules, resulting in the sustained release for about 410 min. The drug release was significantly prolonged compared to a single burst release from a traditional capsular design. The bioinspired design and manufacture of multiple compartmentalized capsules enable customized drug release in a controllable fashion with combinations of different drugs, drug doses, and release kinetics, and have potential for use in personalized medicine.

Fabrication and properties of PLA/nano-HA composite scaffolds with balanced mechanical properties and biological functions for bone tissue engineering application

Repair of critical bone defects is a challenge in the orthopedic clinic. 3D printing is an advanced personalized manufacturing technology that can accurately shape internal structures and external contours. In this study, the composite scaffolds of polylactic acid (PLA) and nano-hydroxyapatite (n-HA) were manufactured by the fused deposition modeling (FDM) technique. Equal mass PLA and n-HA were uniformly mixed to simulate the organic and inorganic phases of natural bone. The suitability of the composite scaffolds was evaluated by material characterization, mechanical property, and in vitro biocompatibility, and the osteogenesis induction in vitro was further tested. Finally, the printed scaffold was implanted into the rabbit femoral defect model to evaluate the osteogenic ability in vivo. The results showed that the composite scaffold had sufficient mechanical strength, appropriate pore size, and biocompatibility. Most importantly, the osteogenic induction performance of the composite scaffold was significantly better than that of the pure PLA scaffold. In conclusion, the PLA/n-HA scaffold is a promising composite biomaterial for bone defect repair and has excellent clinical transformation potential.

Nano-hybrid gradient scaffold for articular repair

Osteoarthritis disease can easily lead to articular cartilage degeneration and subchondral bone damage, so the demand for suitable articular substitutes is gradually increasing. In order to simulate the complex environment of different layers in natural joint, we fabricate the continuous one-phase gradient scaffold. In the study, CS (chitosan) was modified with SH (sodium hyaluronate) and GO (graphene oxide) to form the whole scaffold. nHAP (Nano-hydroxyapatite) was in situ generated with gradient distribution in the scaffold. Continuous interface can better imitate the combination style of cartilage and subchondral bone at joint. The diverseness of scaffold's different layer in water absorption/retention rate and mechanical property is similar to the difference of articular cartilage and subchondral bone. Meanwhile, the cell experiments demonstrated that the bionic scaffold can well promote the proliferation of bone marrow mesenchymal stem cell. Articular defect model further confirmed that the scaffold can better induce articular regeneration. Herein, the prepared scaffold might be an excellent candidate for endogenous articular repair.

3D printable magnesium-based cements towards the preparation of bioceramics

HYPOTHESIS

Among all the materials used so far to replace and repair damaged bone tissues, magnesium silicate bioceramics are one of the most promising, thanks to their biocompatibility, osteoinductive properties and good mechanical stability.

EXPERIMENTS

Magnesium silicate cement pastes were prepared by hydration of MgO mixed with different SiO₂ batches at different Mg/Si molar ratios. Pastes were either moulded or 3D printed to obtain set cements that were then calcined at 1000 °C to produce biologically relevant ceramic materials. Both cements and ceramics were characterized by means of X-ray diffraction, while two selected formulations were thoroughly characterized by means of injectability tests, Raman confocal microscopy, scanning electron microscopy, atomic force microscopy, gas porosimetry, X-ray microtomography and compressive tests.

FINDINGS

The results show that bioceramic scaffolds, namely forsterite and clinoenstatite, can be effectively obtained by 3D printing MgO/SiO₂ cement pastes, paving the way towards important advances in the field of bone tissue engineering.

Bilayered scaffold with 3D printed stiff subchondral bony compartment to provide constant mechanical support for long-term cartilage regeneration

BACKGROUND/OBJECTIVE

We seek to figure out the effect of stable and powerful mechanical microenvironment provided by Ti alloy as a part of subchondral bone scaffold on long-term cartilage regeneration.Methods: we developed a bilayered osteochondral scaffold based on the assumption that a stiff subchondral bony compartment would provide stable mechanical support for cartilage regeneration and enhance subchondral bone regeneration. The subchondral bony compartment was prepared from 3D printed Ti alloy, and the cartilage compartment was created from a freeze-dried collagen sponge, which was reinforced by poly-lactic-co-glycolic acid (PLGA).

RESULTS

In vitro evaluations confirmed the biocompatibility of the scaffold materials, while in vivo evaluations demonstrated that the mechanical support provided by 3D printed Ti alloy layer plays an important role in the long-term regeneration of cartilage by accelerating osteochondral formation and its integration with the adjacent host tissue in osteochondral defect model at rabbit femoral trochlea after 24 weeks.

CONCLUSION

Mechanical support provided by 3D printing Ti alloy promotes cartilage regeneration by promoting subchondral bone regeneration and providing mechanical support platform for cartilage synergistically.

TRANSLATIONAL POTENTIAL STATEMENT

The raw materials used in our double-layer osteochondral scaffolds are all FDA approved materials for clinical use. 3D printed titanium alloy scaffolds can promote bone regeneration and provide mechanical support for cartilage regeneration, which is very suitable for clinical scenes of osteochondral defects. In fact, we are conducting clinical trials based on our scaffolds. We believe that in the near future, the scaffold we designed and developed can be formally applied in clinical practice.

Three-dimensional-poly(lactic acid) scaffolds coated with gelatin/magnesium-doped nano-hydroxyapatite for bone tissue engineering

BACKGROUND

Treatment of critical-sized bone defects has progressively evolved over the years from metallic implants to more ingenious three-dimensional-based scaffolds. The use of three-dimensional scaffolds for bone regeneration from biodegradable polymers like poly(lactic acid) (PLA) is gaining popularity. Scaffolds with surface functionalization using gelatin (Gel) have the advantages of biocompatibility and cell adhesion. Nano-hydroxyapatite (nHAp) is one of the most promising implant materials utilized in orthopaedics. The osteogenic potential of the nHAp can be improved by the substitution of magnesium (Mg) ions onto the crystal lattice of nHAp. Thus, the goal of this work was to make three-dimensional-PLA scaffolds covered with Gel/Mg-nHAp for osteogenic effect.

METHODS AND RESULTS

The designed three-dimensional-PLA/Gel/Mg-nHAp scaffolds were attributed to various characterizations for the examination of their physicochemical, mechanical properties, cyto-compatibility, and biodegradability as well as their ability to promote osteogenesis in vitro. Mouse mesenchymal stem cells (mMSCs) were cytocompatible with these scaffolds. The osteogenic potential of three-dimensional-PLA/Gel/Mg-nHAp scaffolds employing mMSCs was validated at the cellular and molecular levels. The three-dimensional-PLA/Gel/Mg-nHAp scaffolds stimulated the differentiation of mMSCs towards osteoblastic lineage.

CONCLUSION

Based on these findings, we suggest that the three-dimensional-PLA/Gel/Mg-nHAp scaffolds' osteogenic capability may be advantageous in the mending of bone defects in orthopedic applications.

3D bio-printed biphasic scaffolds with dual modification of silk fibroin for the integrated repair of osteochondral defects

Repair of osteochondral defects is still a challenge, especially the regeneration of hyaline cartilage. Parathyroid hormone (PTH) can inhibit the hypertrophy of chondrocytes to maintain the phenotype of hyaline cartilage. Here, we aimed to construct a bio-printed biphasic scaffold with a mechanical gradient based on dual modification of silk fibroin (SF) for the integrated repair of osteochondral defects. Briefly, SF was grafted with PTH (SF-PTH) and covalently immobilized with methacrylic anhydride (SF-MA), respectively. Next, gelatin methacryloyl (GM) mixed with SF-PTH or SF-MA was used as a bio-ink for articular cartilage and subchondral bone regeneration. Finally, the GM + SF-PTH/GM + SF-MA osteochondral biphasic scaffold was constructed using 3D bioprinting technology, and implanted in a rabbit osteochondral defect model. In this study, the SF-PTH bio-ink was synthesized for the first time. In vitro results indicated that the GM + SF-MA bio-ink had good mechanical properties, while the GM + SF-PTH bio-ink inhibited the hypertrophy of chondrocytes and was beneficial for the production of hyaline cartilage extracellular matrix. Importantly, an integrated GM + SF-PTH/GM + SF-MA biphasic scaffold with a mechanical gradient was successfully constructed. The results in vivo demonstrated that the GM + SF-PTH/GM + SF-MA scaffold could promote the regeneration of osteochondral defects and maintain the phenotype of hyaline cartilage to a large extent. Collectively, our results indicate that the integrated GM + SF-PTH/GM + SF-MA biphasic scaffold constructed by 3D bioprinting is expected to become a new strategy for the treatment of osteochondral defects.

Repair calvarial defect of osteoporotic rats by berberine functionalized porous calcium phosphate scaffold

In this article, we propose a simple scheme of using berberine (BBR) to modify porous calcium phosphate ceramics (named PCPC). These BBR molecules regulate the crystallization of hydroxyapatite nanorods on PCPC. We found that these nanorods and the adsorbed BBR changed the interface micro-environment of PCPC by SEM images. The microenvironment of PCPC surface is essential for promoting BMSCs’ proliferation and differentiation. These results demonstrated that PCPC/BBR markedly improved the bone regeneration of osteoporosis rats. Moreover, PCPC/BBR had significantly increased the expression levels of ALP, osteocalcin and bone morphogenetic protein2 and RUNX2 in BMSCs originated from osteoporosis rats.

NEURAL NETWORK-BASED REPAIRING SKULL DEFECTS: AN INITIAL ASSESSMENT OF PERFORMANCE AND FEASIBILITY

Accurate 3D reconstruction of the defective part is critically important for repairing defects in the human skull. After investigating the feasibility of 3D convolution neural network (CNN)-based approach, DeepMedic CNN is chosen for repairing defects of the human skull. Training set of 3D CNN model is produced by randomly segmenting the initial 3D model of the skull which come from a whole CT scan of a healthy person. The 3D CNN model was evaluated using a computer-simulated 3D skull model containing the defective part, and in vivo patient. The results showed that based on 160 groups of computer-simulated 3D CT data, the average dice similarity coefficient (DSC), sensitivity (SE) and Hausdorff distance (HD) are 89.31%, 91.81%, and 25.9%, respectively. These quantitative indexes showed that the proposed method is able to do a reliable bone structure predication. For in vivo patient, the obtained model is also able to generate a suitable 3D bone model for the data under consideration. This approach could increase the computational efficiency of the repairing process without the need for segmentation and reconstruction of the skull, and thereby has potential applications to motivating further accurate repairing of defects of skull.

Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Hydroxyapatite (HA) and HA-based nanocomposites have been recognized as ideal biomaterials in hard tissue engineering because of their compositional similarity to bioapatite. However, the traditional HA-based nanocomposites fabrication techniques still limit the utilization of HA in bone, cartilage, dental, applications, and other fields. In recent years, three-dimensional (3D) printing has been shown to provide a fast, precise, controllable, and scalable fabrication approach for the synthesis of HA-based scaffolds. This review therefore explores available 3D printing technologies for the preparation of porous HA-based nanocomposites. In the present review, different 3D printed HA-based scaffolds composited with natural polymers and/or synthetic polymers are discussed. Furthermore, the desired properties of HA-based composites via 3D printing such as porosity, mechanical properties, biodegradability, and antibacterial properties are extensively explored. Lastly, the applications and the next generation of HA-based nanocomposites for tissue engineering are discussed.

Preparation and application of chitosan biomaterials in dentistry

Chitosan is a biodegradable and biocompatible natural polysaccharide that has a wide range of applications in the field of dentistry due to its functional versatility and ease of access. Recent studies find that chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antimicrobial agent to better manage oral diseases. In this paper, we provide a comprehensive overview on the preparation, applications, and major breakthroughs of chitosan biomaterials. Furthermore, incorporation of chitosan additives for the modification and improvement of dental materials has been discussed in depth to promote more advanced chitosan-related research in the future.

Hyaluronic acid as a bioactive component for bone tissue regeneration: Fabrication, modification, properties, and biological functions

Hyaluronic acid (HA) is widely distributed in the human body, and it is heavily involved in many physiological functions such as tissue hydration, wound repair, and cell migration. In recent years, HA and its derivatives have been widely used as advanced bioactive polymers for bone regeneration. Many medical products containing HA have been developed because this natural polymer has been proven to be nontoxic, noninflammatory, biodegradable, and biocompatible. Moreover, HA-based composite scaffolds have shown good potential for promoting osteogenesis and mineralization. Recently, many HA-based biomaterials have been fabricated for bone regeneration by combining with electrospinning and 3D printing technology. In this review, the polymer structures, processing, properties, and applications in bone tissue engineering are summarized. The challenges and prospects of HA polymers are also discussed.

Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine

Three-dimensional (3D) printing technology allows fabricating complex and precise structures by stacking materials layer by layer. The fabrication method has a strong potential in the regenerative medicine field to produce customizable and defect-fillable scaffolds for tissue regeneration. Plus, biocompatible materials, bioactive molecules, and cells can be printed together or separately to enhance scaffolds, which can save patients who suffer from shortage of transplantable organs. There are various 3D printing techniques that depend on the types of materials, or inks, used. Here, different types of organs (bone, cartilage, heart valve, liver, and skin) that are aided by 3D printed scaffolds and printing methods that are applied in the biomedical fields are reviewed.

Additive manufacturing of PLA-based scaffolds intended for bone regeneration and strategies to improve their biological properties

Polylactic acid (PLA) is one of the most commonly used materials in the biomedical sector because of its processability, mechanical properties and biocompatibility. Among the different techniques that are feasible to process this biomaterial, additive manufacturing (AM) has gained attention recently, as it provides the possibility of tuning the design of the structures. This flexibility in the design stage allows the customization of the parts in order to optimize their use in the tissue engineering field. In the recent years, the application of PLA for the manufacture of bone scaffolds has been especially relevant, since numerous studies have proven the potential of this biomaterial for bone regeneration. This review contains a description of the specific requirements in the regeneration of bone and how the state of the art have tried to address them with different strategies to develop PLA-based scaffolds by AM techniques and with improved biofunctionality.

Construction of Biomimetic Natural Wood Hierarchical Porous-Structure Bioceramic with Micro/Nanowhisker Coating to Modulate Cellular Behavior and Osteoinductive Activity

Scaffolds with a biomimetic hierarchy micro/nanoscale pores play an important role in bone tissue regeneration. In this study, multilevel porous calcium phosphate (CaP) bioceramic orthopedic implants were constructed to mimic the micro/nanostructural hierarchy in natural wood. The biomimetic hierarchical porous scaffolds were fabricated by combining three-dimensional (3D) printing technology and hydrothermal treatment. The first-level macropores (∼100-600 μm) for promoting bone tissue ingrowth were precisely designed using a set of 3D printing parameters. The second-level micro/nanoscale pores (∼100-10,000 nm) in the scaffolds were obtained by hydrothermal treatment to promote nutrient/metabolite transportation. Micro- and nanoscale-sized pores in the scaffolds were recognized as in situ formation of whiskers, where the shape, diameter, and length of whiskers were modulated by adjusting the components of calcium phosphate ceramics and hydrothermal treatment parameters. These biomimetic natural wood-like hierarchical structured scaffolds demonstrated unique physical and biological properties. Hydrophilicity and the protein adsorption rate were characterized in these scaffolds. In vitro studies have identified micro/nanowhisker coating as potent modulators of cellular behavior through the onset of focal adhesion formation. In addition, histological results indicate that biomimetic scaffolds with porous natural wood hierarchical pores exhibited good osteoinductive activity. In conclusion, these findings combined suggested that micro/nanowhisker coating is a critical factor to modulate cellular behavior and osteoinductive activity.

Biphasic ceramic biomaterials with tunable spatiotemporal evolution for highly efficient alveolar bone repair

Alveolar bone defects, which are characterized by a relatively narrow space and location adjacent to the cementum, require promising substitute biomaterials for their regeneration. In this study, we introduced novel yolk-shell biphasic bio-ceramic granules with/without a customized porous shell and evaluated their biological effect together with structural transformation. Firstly, a self-made coaxial bilayer capillary system was applied for the fabrication of granules. Secondly, thorough morphological and physicochemical characterizations were performed in vitro. Subsequently, the granules were implanted into critical-size alveolar bone defects (10 × 4 × 3 mm) in New Zealand white rabbits, with Bio-Oss® as the positive control. Finally, at 2, 4, 8, and 16 weeks postoperatively, the alveolar bone specimens were harvested and assessed via radiological and histological examination. Our results showed that the yolk-shell biphasic bio-ceramic granules, especially those with porous shells, exhibited a tunable ion release performance, improved biodegradation behavior and satisfactory osteogenesis compared with the homogeneously hybrid and Bio-Oss® granules both in vitro and in vivo. This study provides the first evidence that novel yolk-shell bio-ceramic granules, on account of their adjustable porous microstructure, have great potential in alveolar bone repair.

Review of Plastic Surgery Biomaterials and Current Progress in Their 3D Manufacturing Technology

Plastic surgery is a broad field, including maxillofacial surgery, skin flaps and grafts, liposuction and body contouring, breast surgery, and facial cosmetic procedures. Due to the requirements of plastic surgery for the biological safety of materials, biomaterials are widely used because of its superior biocompatibility and biodegradability. Currently, there are many kinds of biomaterials clinically used in plastic surgery and their applications are diverse. Moreover, with the rise of three-dimensional printing technology in recent years, the macroscopically more precise and personalized bio-scaffolding materials with microporous structure have made good progress, which is thought to bring new development to biomaterials. Therefore, in this paper, we reviewed the plastic surgery biomaterials and current progress in their 3D manufacturing technology.

A glance on the role of actin in osteogenic and adipogenic differentiation of mesenchymal stem cells

Mesenchymal stem cells (MSCs) have the capacity to differentiate into multiple lineages including osteogenic and adipogenic lineages. An increasing number of studies have indicated that lineage commitment by MSCs is influenced by actin remodeling. Moreover, actin has roles in determining cell shape, nuclear shape, cell spreading, and cell stiffness, which eventually affect cell differentiation. Osteogenic differentiation is promoted in MSCs that exhibit a large spreading area, increased matrix stiffness, higher levels of actin polymerization, and higher density of stress fibers, whereas adipogenic differentiation is prevalent in MSCs with disrupted actin networks. In addition, the mechanical properties of F-actin empower cells to sense and transduce mechanical stimuli, which are also reported to influence differentiation. Various biomaterials, mechanical, and chemical interventions along with pathogen-induced actin alteration in the form of polymerization and depolymerization in MSC differentiation were studied recently. This review will cover the role of actin and its modifications through the use of different methods in inducing osteogenic and adipogenic differentiation.

Berberine/Ag nanoparticle embedded biomimetic calcium phosphate scaffolds for enhancing antibacterial function

In the past decade, biomimetic calcium phosphate (CaP) ceramics have been considered as practicable grafts and biomaterial substitutes in repairing jaw bone defect after tumor resection or traffic accident. Nowadays, increasing incidence of biomedical material-associated infection has raised a concern when applying these materials. In this work, a new porous CaP scaffold with antibacterial coating was proposed. This biomimetic scaffold was composited with berberine (BBR), Ag nanoparticles (nAg), and silk fibroin (SF). The microstructures and phase composition of the scaffolds were analyzed. The cytocompatibility and osteogenic potential of the prepared samples were evaluated in vitro. The scaffolds held hierarchical structure: the first-level porous CaP ceramic with micron pores ranged from 250 to 600 µm; the second-level spongy-like structure with abundant capillary pores ranged from 500 nm to 10 µm; and the third-level structure was achieved by filling BBR, nAg, and SF gel coatings into the above porous structures. The experimental results showed that the antimicrobial capability of single BBR coating is inconspicuous. However, the introduction of nAg could significantly promote the antibacterial effect of scaffolds. At the same time, such scaffolds showed improved osteoinductivity. This new biomimetic CaP scaffold with antibacterial and osteoinductive properties may be a promising candidate for bone tissue engineering.

Advances in biomaterials for adipose tissue reconstruction in plastic surgery

Adipose tissue reconstruction is an important technique for soft tissue defects caused by facial plastic surgery and trauma. Adipose tissue reconstruction can be repaired by fat transplantation and biomaterial filling, but there are some problems in fat transplantation, such as second operation and limited resources. The application of advanced artificial biomaterials is a promising strategy. In this paper, injectable biomaterials and three-dimensional (3D) tissue-engineered scaffold materials for adipose tissue reconstruction in plastic surgery are reviewed. Injectable biomaterials include natural biomaterials and artificial biomaterials, which generally have problems such as high absorptivity of fillers, repeated injection, and rejection. In recent years, the technology of new 3D tissue-engineering scaffold materials with adipose-derived stem cells (ADSCs) and porous scaffold as the core has made good progress in fat reconstruction, which is expected to solve the current problem of clinical adipose tissue reconstruction, and various biomaterials preparation technology and transformation research also provide the basis for clinical transformation of fat tissue reconstruction.

An insight into cell-laden 3D-printed constructs for bone tissue engineering

In this review, we have spotlighted various combinations of bioinks to optimize the biofabrication of 3D bone constructs.