Hydrothermal approached 1-D molybdenum oxide nanostructures for high-performance supercapacitor application

Harnessing plasma-generated reactive species for the synthesis of different phases of molybdenum oxide to study adsorption and photocatalytic activity

This study employs plasma-liquid interaction technique to synthesize different phases of molybdenum oxide using air and argon as plasma-forming gases. In situ plasma-generated nitrogen species primarily NO3-/NO2- and hydrogen species (H+) facilitate the reduction of the molybdenum precursor anion (Mo7O24-). The reduced Mo species subsequently reacts with reactive oxygen species, forming MoO6 octahedra, which is the building block of a molybdenum oxide crystal. Varied concentrations of NO3-/NO2- and H+ species in air and argon plasma treatment significantly influence the growth process. Air plasma synthesis yields hexagonal molybdenum oxide microrods, which upon calcination changes its phase to orthorhombic 2D layered structure. Moreover, the argon plasma synthesized sample exhibits a mixed phase of hexagonal and orthorhombic molybdenum oxide due to the heavy argon ion bombardment, inducing material porosity and surface oxygen vacancies. The mixed-phase material exhibits superior adsorption and photo-degradation towards cationic dye compared to the other two phases. The higher photocatalytic performance may be responsible for the extended lifetime of the photo-generated charge carriers possessed by the mixed-phase material. Radical scavenging tests have identified holes and hydroxyl radicals as the key reactive species that take part in the photo-degradation process.

Semitransparent Perovskite Solar Cells with Ultrathin Protective Buffer Layers

Semitransparent perovskite solar cells (ST-PSCs) are increasingly important in a range of applications, including top cells in tandem devices and see-through photovoltaics. Transparent conductive oxides (TCOs) are commonly used as transparent electrodes, with sputtering being the preferred deposition method. However, this process can damage exposed layers, affecting the electrical performance of the devices. In this study, an indium tin oxide (ITO) deposition process that effectively suppresses sputtering damage was developed using a transition metal oxides (TMOs)-based buffer layer. An ultrathin (<10 nm) layer of evaporated vanadium oxide or molybdenum oxide was found to be effective in protecting against sputtering damage in ST-PSCs for tandem applications, as well as in thin perovskite-based devices for building-integrated photovoltaics. The identification of minimal parasitic absorption, the high work function and the analysis of oxygen vacancies denoted that the TMO layers are suitable for use in ST-PSCs. The highest fill factor (FF) achieved was 76%, and the efficiency (16.4%) was reduced by less than 10% when compared with the efficiency of gold-based PSCs. Moreover, up-scaling to 1 cm2-large area ST-PSCs with the buffer layer was successfully demonstrated with an FF of ∼70% and an efficiency of 15.7%. Comparing the two TMOs, the ST-PSC with an ultrathin V2Ox layer was slightly less efficient than that with MoOx, but its superior transmittance in the near infrared and greater light-soaking stability (a T80 of 600 h for V2Ox compared to a T80 of 12 h for MoOx) make V2Ox a promising buffer layer for preventing ITO sputtering damage in ST-PSCs.

Efficient Samarium-Grafted-C3N4-Doped α-MoO3 Used as a Dye Degrader and Antibacterial Agent: In Silico Molecular Docking Study

This study was used to evaluate the catalytic activity (CA) and bactericidal activity of α-MoO3 and Sm-g-C3N4-doped α-MoO3 composites prepared through an efficient, cost-effective coprecipitation route. Their characteristic studies verify the formation of α-MoO3 and its composites (3, 6, and 9 mL Sm-g-C3N4-doped α-MoO3), which showed high crystallinity, as confirmed by X-ray diffraction (XRD) analysis. The production of superoxide and hydroxyl radicals due to charge transfer through α-MoO3 and g-C3N4 eventually forms electrons in g-C3N4 and holes around α-MoO3. CA against Rhodamine B (RhB) in basic medium provides maximum results compared to acidic and neutral media. The bactericidal efficacy of the (9 mL) doped sample represents a greater inhibition zone of 6.10 mm against the negative bacterial strain Escherichia coli. Furthermore, in silico studies showed that the generated nanorods may inhibit DNA gyrase and dihydropteroate synthase (DHPS) enzymes.

Interfacial engineering and chemical reconstruction of Mo/Mo2C@CoO@NC heterostructure for promoting oxygen evolution reaction

Chemical reorganization and interfacial engineering in hybrid nanomaterials are promising strategies for enhancing electrocatalytic performance. Herein, MoO₃@zeolitic imidazolate framework-67 (ZIF-67) heterogeneous nanoribbons are designed through coordination assembly. By following heat treatment, a Mo/Mo₂C@CoO@NC heterostructure with nitrogen-doped carbon-encapsulated CoO hexagons (CoO@NC) anchored on the Mo/Mo₂C jag matrix was fabricated. Notably, through controllable experimental optimization, the as-prepared Mo/Mo₂C@CoO@NC heterostructure exhibits numerous active centers (e.g. Mo, Mo₂C, CoO, and NC), fully exposed active sites (numerous pores and jagged structures), and abundant heterointerfaces (Mo/Mo₂C, Mo₂C/CoO@NC, Mo₂C/amorphous, and CoO@NC/amorphous), and exhibits good conductivity (localized single-crystal behavior, graphitized carbon). As a result, the as-developed Mo/Mo₂C@CoO@NC heterostructures inherit impressive oxygen evolution reaction (OER) performance with an overpotential of only 215 mV at 10 mA cm^-2. Furthermore, Mo/Mo₂C@CoO@NC heterostructures exhibit excellent stability with a current density retention of 98.4% after 20 h chronoamperometry. This work provides deep insights into chemical reconstructions and tuning heterointerfaces to efficiently enhance the OER activity of heterostructure-based electrocatalysts.