Development rheological and thermal properties of a novel propellant RDX/TEGDN/NBC

Cellulose Nitrates-Blended Composites from Bacterial and Plant-Based Celluloses

Cellulose nitrates (CNs)-blended composites based on celluloses of bacterial origin (bacterial cellulose (BC)) and plant origin (oat-hull cellulose (OHC)) were synthesized in this study for the first time. Novel CNs-blended composites made of bacterial and plant-based celluloses with different BC-to-OHC mass ratios of 70/30, 50/50, and 30/70 were developed and fully characterized, and two methods were employed to nitrate the initial BC and OHC, and the three cellulose blends: the first method involved the use of sulfuric-nitric mixed acids (MAs), while the second method utilized concentrated nitric acid in the presence of methylene chloride (NA + MC). The CNs obtained using these two nitration methods were found to differ between each other, most notably, in viscosity: the samples nitrated with NA + MC had an extremely high viscosity of 927 mPa·s through to the formation of an immobile transparent acetonogel. Irrespective of the nitration method, the CN from BC (CN BC) was found to exhibit a higher nitrogen content than the CN from OHC (CN OHC), 12.20-12.32% vs. 11.58-11.60%, respectively. For the starting BC itself, all the cellulose blends of the starting celluloses and their CNs were detected using the SEM technique to have a reticulate fiber nanostructure. The cellulose samples and their CNs were detected using the IR spectroscopy to have basic functional groups. TGA/DTA analyses of the starting cellulose samples and the CNs therefrom demonstrated that the synthesized CN samples were of high purity and had high specific heats of decomposition at 6.14-7.13 kJ/g, corroborating their energy density. The CN BC is an excellent component with in-demand energetic performance; in particular, it has a higher nitrogen content while having a stable nanostructure. The CN BC was discovered to have a positive impact on the stability, structure, and energetic characteristics of the composites. The presence of CN OHC can make CNs-blended composites cheaper. These new CNs-blended composites made of bacterial and plant celluloses are much-needed in advanced, high-performance energetic materials.

Simultaneous Production of Cellulose Nitrates and Bacterial Cellulose from Lignocellulose of Energy Crop

This study is focused on exploring the feasibility of simultaneously producing the two products, cellulose nitrates (CNs) and bacterial cellulose (BC), from Miscanthus × giganteus. The starting cellulose for them was isolated by successive treatments of the feedstock with HNO3 and NaOH solutions. The cellulose was subjected to enzymatic hydrolysis for 2, 8, and 24 h. The cellulose samples after the hydrolysis were distinct in structure from the starting sample (degree of polymerization (DP) 1770, degree of crystallinity (DC) 64%) and between each other (DP 1510-1760, DC 72-75%). The nitration showed that these samples and the starting cellulose could successfully be nitrated to furnish acetone-soluble CNs. Extending the hydrolysis time from 2 h to 24 h led to an enhanced yield of CNs from 116 to 131%, with the nitrogen content and the viscosity of the CN samples increasing from 11.35 to 11.83% and from 94 to 119 mPa·s, respectively. The SEM analysis demonstrated that CNs retained the fiber shape. The IR spectroscopy confirmed that the synthesized material was specifically CNs, as evidenced by the characteristic frequencies of 1657-1659, 1277, 832-833, 747, and 688-690 cm-1. Nutrient media derived from the hydrolyzates obtained in 8 h and 24 h were of good quality for the synthesis of BC, with yields of 11.1% and 9.6%, respectively. The BC samples had a reticulate structure made of interlaced microfibrils with 65 and 81 nm widths and DPs of 2100 and 2300, respectively. It is for the first time that such an approach for the simultaneous production of CNs and BC has been employed.

Promising Energetic Polymers from Nanostructured Bacterial Cellulose

This study investigated the nitration of nanostructured bacterial cellulose (NBC). The NBC, obtained using symbiotic Medusomyces gisevii Sa-12 as the microbial producer and then freeze-dried, was nitrated herein by two methods, the first using mixed sulphuric-nitric acids (MA) and the second using concentrated nitric acid in the presence of methylene chloride (NA+MC). The synthesized samples of NBC nitrates (NBCNs) exhibited 11.77-12.27% nitrogen content, a viscosity of 1086 mPa·s or higher, 0.7-14.5% solubility in an alcohol-ester mixture, and 0.002% ash. Scanning electron microscopy showed that the nitration compacted the NBC structure, with the original reticulate pattern of the structure being preserved in full. Infrared spectroscopy for the presence of functional nitro groups at 1658-1659, 1280, 838-840, 749-751 and 693-694 cm^-1 confirmed the synthesis of cellulose nitrates in particular. Thermogravimetric and differential thermal analyses showed the resultant NBCNs to have a high purity and high specific heats of decomposition of 6.94-7.08 kJ/g. The NBCN samples differ conceptually from plant-based cellulose nitrates by having a viscosity above 1086 mPa·s and a unique 3D reticulate structure that is retained during the nitration. The findings suggest that the NBCNs can be considered for use in novel high-tech materials and science-driven fields distinct from the application fields of plant-based cellulose nitrates. The NBCN sample obtained with NA+MC has the ability to generate an organogel when it is dissolved in acetone. Because of the said property, this NBCN sample can find use as a classical adhesive scaffold and an energetic gel matrix for creating promising energetic polymers.

Glycerol-controlled synthesis of a series of cobalt acid composites and their catalytic decomposition toward several energetic materials

One of the challenges in solid propellant formulation is the ability to extend the combustion performance by efficiently catalyzing the decomposition of energetic additives.