Biochemical studies of the c-type cytochromes of the sulfate reducer Desulfovibrio africanus. Characterization of two tetraheme cytochromes c3 with different specificity

A brief survey of the "cytochromome"

Multihaem cytochromes c are widespread in nature where they perform numerous roles in diverse anaerobic metabolic pathways. This is achieved in two ways: multihaem cytochromes c display a remarkable diversity of ways to organize multiple hemes within the protein frame; and the hemes possess an intrinsic reactive versatility derived from diverse spin, redox and coordination states. Here we provide a brief survey of multihaem cytochromes c that have been characterized in the context of their metabolic role. The contribution of multihaem cytochromes c to dissimilatory pathways handling metallic minerals, nitrogen compounds, sulfur compounds, organic compounds and phototrophism are described. This aims to set the stage for the further exploration of the vast unknown "cytochromome" that can be anticipated from genomic databases.

Effect of Fe(iii) on the performance of sediment microbial fuel cells in treating waste-activated sludge

Chemical energy stored in sludge can be directly converted into electricity using sediment microbial fuel cell (SMFC) technology.

Analysis of the electrochemistry of hemes with E(m)s spanning 800 mV

The free energy of heme reduction in different proteins is found to vary over more than 18 kcal/mol. It is a challenge to determine how proteins manage to achieve this enormous range of E(m)s with a single type of redox cofactor. Proteins containing 141 unique hemes of a-, b-, and c-type, with bis-His, His-Met, and aquo-His ligation were calculated using Multi-Conformation Continuum Electrostatics (MCCE). The experimental E(m)s range over 800 mV from -350 mV in cytochrome c(3) to 450 mV in cytochrome c peroxidase (vs. SHE). The quantitative analysis of the factors that modulate heme electrochemistry includes the interactions of the heme with its ligands, the solvent, the protein backbone, and sidechains. MCCE calculated E(m)s are in good agreement with measured values. Using no free parameters the slope of the line comparing calculated and experimental E(m)s is 0.73 (R(2) = 0.90), showing the method accounts for 73% of the observed E(m) range. Adding a +160 mV correction to the His-Met c-type hemes yields a slope of 0.97 (R(2) = 0.93). With the correction 65% of the hemes have an absolute error smaller than 60 mV and 92% are within 120 mV. The overview of heme proteins with known structures and E(m)s shows both the lowest and highest potential hemes are c-type, whereas the b-type hemes are found in the middle E(m) range. In solution, bis-His ligation lowers the E(m) by approximately 205 mV relative to hemes with His-Met ligands. The bis-His, aquo-His, and His-Met ligated b-type hemes all cluster about E(m)s which are approximately 200 mV more positive in protein than in water. In contrast, the low potential bis-His c-type hemes are shifted little from in solution, whereas the high potential His-Met c-type hemes are raised by approximately 300 mV from solution. The analysis shows that no single type of interaction can be identified as the most important in setting heme electrochemistry in proteins. For example, the loss of solvation (reaction field) energy, which raises the E(m), has been suggested to be a major factor in tuning in situ E(m)s. However, the calculated solvation energy vs. experimental E(m) shows a slope of 0.2 and R(2) of 0.5 thus correlates weakly with E(m)s. All other individual interactions show even less correlation with E(m). However the sum of these terms does reproduce the range of observed E(m)s. Therefore, different proteins use different aspects of their structures to modulate the in situ heme electrochemistry. This study also shows that the calculated E(m)s are relatively insensitive to different heme partial charges and to the protein dielectric constant used in the simulation.

Strategic roles of axial histidines in structure formation and redox regulation of tetraheme cytochrome c3

Tetraheme cytochrome c 3 (cyt c 3) exhibits extremely low reduction potentials and unique properties. Since axial ligands should be the most important factors for this protein, every axial histidine of Desulfovibrio vulgaris Miyazaki F cyt c 3 was replaced with methionine, one by one. On mutation at the fifth ligand, the relevant heme could not be linked to the polypeptide, revealing the essential role of the fifth histidine in heme linking. The fifth histidine is the key residue in the structure formation and redox regulation of a c-type cytochrome. A crystal structure has been obtained for only H25M cyt c 3. The overall structure was not affected by the mutation except for the sixth methionine coordination at heme 3. NMR spectra revealed that each mutated methionine is coordinated to the sixth site of the relevant heme in the reduced state, while ligand conversion takes place at hemes 1 and 4 during oxidation at pH 7. The replacement of the sixth ligand with methionine caused an increase in the reduction potential of the mutated heme of 222-244 mV. The midpoint potential of a triheme H52M cyt c 3 is higher than that of the wild type by approximately 50 mV, suggesting a contribution of the tetraheme architecture to the lowering of the reduction potentials. The hydrogen bonding of Thr24 with an axial ligand induces a decrease in reduction potential of approximately 50 mV. In conclusion, the bis-histidine coordination is strategically essential for the structure formation and the extremely low reduction potential of cyt c 3.

Functional properties of type I and type II cytochromes c3 from Desulfovibrio africanus

Type I cytochrome c(3) is a key protein in the bioenergetic metabolism of Desulfovibrio spp., mediating electron transfer between periplasmic hydrogenase and multihaem cytochromes associated with membrane bound complexes, such as type II cytochrome c(3). This work presents the NMR assignment of the haem substituents in type I cytochrome c(3) isolated from Desulfovibrio africanus and the thermodynamic and kinetic characterisation of type I and type II cytochromes c(3) belonging to the same organism. It is shown that the redox properties of the two proteins allow electrons to be transferred between them in the physiologically relevant direction with the release of energised protons close to the membrane where they can be used by the ATP synthase.

Proton thrusters: overview of the structural and functional features of soluble tetrahaem cytochromes c 3

Tetrahaem cytochromes c (3) from sulfate-reducing bacteria have revealed exquisite complexity in their ligand binding properties and they couple the cooperative binding of two electrons with the binding of protons. In this review, the molecular mechanisms for these cooperative effects are described, and the functional consequences of these cooperativities are discussed in the context of the general mechanisms of biological energy transduction and the specific physiological metabolism of Desulfovibrio.

Hydrogenases in Desulfovibrio vulgaris Hildenborough: structural and physiologic characterisation of the membrane-bound [NiFeSe] hydrogenase

The genome of Desulfovibrio vulgaris Hildenborough (DvH) encodes for six hydrogenases (Hases), making it an interesting organism to study the role of these proteins in sulphate respiration. In this work we address the role of the [NiFeSe] Hase, found to be the major Hase associated with the cytoplasmic membrane. The purified enzyme displays interesting catalytic properties, such as a very high H(2) production activity, which is dependent on the presence of phospholipids or detergent, and resistance to oxygen inactivation since it is isolated aerobically in a Ni(II) oxidation state. Evidence was obtained that the [NiFeSe] Hase is post-translationally modified to include a hydrophobic group bound to the N-terminal, which is responsible for its membrane association. Cleavage of this group originates a soluble, less active form of the enzyme. Sequence analysis shows that [NiFeSe] Hases from Desulfovibrionacae form a separate family from the [NiFe] enzymes of these organisms, and are more closely related to [NiFe] Hases from more distant bacterial species that have a medial [4Fe4S](2+/1+) cluster, but not a selenocysteine. The interaction of the [NiFeSe] Hase with periplasmic cytochromes was investigated and is similar to the [NiFe](1) Hase, with the Type I cytochrome c (3) as the preferred electron acceptor. A model of the DvH [NiFeSe] Hase was generated based on the structure of the Desulfomicrobium baculatum enzyme. The structures of the two [NiFeSe] Hases are compared with the structures of [NiFe] Hases, to evaluate the consensual structural differences between the two families. Several conserved residues close to the redox centres were identified, which may be relevant to the higher activity displayed by [NiFeSe] Hases.

The type I/type II cytochrome c3 complex: an electron transfer link in the hydrogen-sulfate reduction pathway

In Desulfovibrio metabolism, periplasmic hydrogen oxidation is coupled to cytoplasmic sulfate reduction via transmembrane electron transfer complexes. Type II tetraheme cytochrome c3 (TpII-c3), nine-heme cytochrome c (9HcA) and 16-heme cytochrome c (HmcA) are periplasmic proteins associated to these membrane-bound redox complexes and exhibit analogous physiological function. Type I tetraheme cytochrome c3 (TpI-c3) is thought to act as a mediator for electron transfer from hydrogenase to these multihemic cytochromes. In the present work we have investigated Desulfovibrio africanus (Da) and Desulfovibrio vulgaris Hildenborough (DvH) TpI-c3/TpII-c3 complexes. Comparative kinetic experiments of Da TpI-c3 and TpII-c3 using electrochemistry confirm that TpI-c3 is much more efficient than TpII-c3 as an electron acceptor from hydrogenase (second order rate constant k = 9 x 10(8) M(-1) s(-1), K(m) = 0.5 microM as compared to k = 1.7 x 10(7) M(-1) s(-1), K(m) = 40 microM, for TpI-c3 and TpII-c3, respectively). The Da TpI-c3/TpII-c3 complex was characterized at low ionic strength by gel filtration, analytical ultracentrifugation and cross-linking experiments. The thermodynamic parameters were determined by isothermal calorimetry titrations. The formation of the complex is mainly driven by a positive entropy change (deltaS = 137(+/-7) J mol(-1) K(-1) and deltaH = 5.1(+/-1.3) kJ mol(-1)) and the value for the association constant is found to be (2.2(+/-0.5)) x 10(6) M(-1) at pH 5.5. Our thermodynamic results reveal that the net increase in enthalpy and entropy is dominantly produced by proton release in combination with water molecule exclusion. Electrostatic forces play an important role in stabilizing the complex between the two proteins, since no complex formation is detected at high ionic strength. The crystal structure of Da TpI-c3 has been solved at 1.5 angstroms resolution and structural models of the complex have been obtained by NMR and docking experiments. Similar experiments have been carried out on the DvH TpI-c3/TpII-c3 complex. In both complexes, heme IV of TpI-c3 faces heme I of TpII-c3 involving basic residues of TpI-c3 and acidic residues of TpII-c3. A secondary interacting site has been observed in the two complexes, involving heme II of Da TpII-c3 and heme III of DvH TpI-c3 giving rise to a TpI-c3/TpII-c3 molar ratio of 2:1 and 1:2 for Da and DvH complexes, respectively. The physiological significance of these alternative sites in multiheme cytochromes c is discussed.

Modeling electron transfer thermodynamics in protein complexes: interaction between two cytochromes c(3)

Redox protein complexes between type I and type II tetraheme cytochromes c(3) from Desulfovibrio vulgaris Hildenborough are here analyzed using theoretical methodologies. Various complexes were generated using rigid-body docking techniques, and the two lowest energy complexes (1 and 2) were relaxed using molecular dynamics simulations with explicit solvent and subjected to further characterization. Complex 1 corresponds to an interaction between hemes I from both cytochromes c(3). Complex 2 corresponds to an interaction between the heme IV from type I and the heme I from type II cytochrome c(3). Binding free energy calculations using molecular mechanics, Poisson-Boltzmann, and surface accessibility methods show that complex 2 is more stable than complex 1. Thermodynamic calculations on complex 2 show that complex formation induces changes in the reduction potential of both cytochromes c(3), but the changes are larger in the type I cytochrome c(3) (the largest one occurring on heme IV, of approximately 80 mV). These changes are sufficient to invert the global titration curves of both cytochromes, generating directionally in electron transfer from type I to type II cytochrome c(3), a phenomenon of obvious thermodynamic origin and consequences, but also with kinetic implications. The existence of processes like this occurring at complex formation may constitute a natural design of efficient redox chains.

Sulfate respiration in Desulfovibrio vulgaris Hildenborough. Structure of the 16-heme cytochrome c HmcA AT 2.5-A resolution and a view of its role in transmembrane electron transfer

The crystal structure of the high molecular mass cytochrome c HmcA from Desulfovibrio vulgaris Hildenborough is described. HmcA contains the unprecedented number of sixteen hemes c attached to a single polypeptide chain, is associated with a membrane-bound redox complex, and is involved in electron transfer from the periplasmic oxidation of hydrogen to the cytoplasmic reduction of sulfate. The structure of HmcA is organized into four tetraheme cytochrome c(3)-like domains, of which the first is incomplete and contains only three hemes, and the final two show great similarity to the nine-heme cytochrome c from Desulfovibrio desulfuricans. An isoleucine residue fills the vacant coordination space above the iron atom in the five-coordinated high-spin Heme 15. The characteristics of each of the tetraheme domains of HmcA, as well as its surface charge distribution, indicate this cytochrome has several similarities with the nine-heme cytochrome c and the Type II cytochrome c(3) molecules, in agreement with their similar genetic organization and mode of reactivity and further support an analogous physiological function for the three cytochromes. Based on the present structure, the possible electron transfer sites between HmcA and its redox partners (namely Type I cytochrome c(3) and other proteins of the Hmc complex), as well as its physiological role, are discussed.

Molecular dynamics study of Desulfovibrio africanus cytochrome c3 in oxidized and reduced forms

A 5-ns molecular dynamics study of a tetraheme cytochrome in fully oxidized and reduced forms was performed using the CHARMM molecular modeling program, with explicit water molecules, Langevin dynamics thermalization, Particle Mesh Ewald long-range electrostatics, and quantum mechanical determination of heme partial charges. The simulations used, as starting points, crystallographic structures of the oxidized and reduced forms of the acidic cytochrome c(3) from Desulfovibrio africanus obtained at pH 5.6. In this paper we also report structures for the two forms obtained at pH 8. In contrast to previous cytochrome c(3) dynamics simulations, our model is stable. The simulation structures agree reasonably well with the crystallographic ones, but our models show higher flexibility and the water molecules are more labile. We have compared in detail the differences between the simulated and experimental structures of the two redox states and observe that the hydration structure is highly dependent on the redox state. We have also analyzed the interaction energy terms between the hemes, the protein residues, and water. The direct electrostatic interaction between hemes is weak and nearly insensitive to the redox state, but the remaining terms are large and contribute in a complex way to the overall potential energy differences that we see between the redox states.

Spectroscopic investigation and determination of reactivity and structure of the tetraheme cytochromec3fromDesulfovibrio desulfuricansEssex 6

Cytochrome c3, a small (14-kDa) soluble tetraheme protein was isolated from the periplasmic fraction of Desulfovibrio desulfuricans strain Essex 6. Its major physiological function appears to be that of an electron carrier for the periplasmic hydrogenase. It has been also shown to interact with the high-molecular-mass cytochrome complex in the cytoplasmic membrane, which eventually feeds electrons into the membraneous quinone pool, as well as with the membrane-associated dissimilatory sulfite reductase. The EPR spectra show features of four different low-spin Fe(III) hemes. Orthorhombic crystals of cytochrome c3 were obtained and X-ray diffraction data were collected to below 2 A resolution. The structure was solved by molecular replacement using cytochrome c3 from D. desulfuricans ATCC 27774 as a search model.

A membrane-bound cytochrome c3: a type II cytochrome c3 from Desulfovibrio vulgaris Hildenborough

A new tetraheme cytochrome c3 was isolated from the membranes of Desulfovibrio vulgaris Hildenborough (DvH). This cytochrome has a molecular mass of 13.4 kDa and a pI of 5.5 and contains four heme c groups with apparent reduction potentials of -170 mV, -235 mV, -260 mV and -325 mV at pH 7.6. The complete sequence of the new cytochrome, retrieved from the preliminary data of the DvH genome, shows that this cytochrome is homologous to the "acidic" cytochrome c3 from Desulfovibrio africanus (Da). A model for the structure of the DvH cytochrome was built based on the structure of the Da cytochrome. Both cytochromes share structural features that distinguish them from other cytochrome c3 proteins, such as a solvent-exposed heme 1 surrounded by an acidic surface area, and a heme 4 which lacks most of the surface lysine patch proposed to be the site of hydrogenase interaction in other cytochrome c3 proteins. Furthermore, in contrast to previously discovered cytochrome c3 proteins, the genes coding for these two cytochromes are adjacent to genes coding for two membrane-associated FeS proteins, which indicates that they may be part of membrane-bound oxidoreductase complexes. Altogether these observations suggest that the DvH and Da cytochromes are a new type of cytochrome c3 proteins (Type II: TpII-c3) with different redox partners and physiological function than the other cytochrome c3 proteins (Type I: TpI-c3). The DvH TpII-c3 is reduced at considerable rates by the two membrane-bound [NiFe] and [NiFeSe] hydrogenases, but catalytic amounts of TpI-c3 increase these rates two- and fourfold, respectively. With the periplasmic [Fe] hydrogenase TpII-c3 is reduced much slower than TpI-c3, and no catalytic effect of TpI-c3 is observed.

Cytochrome c(3) mutants of Desulfovibrio desulfuricans

To explore the physiological role of tetraheme cytochrome c(3) in the sulfate-reducing bacterium Desulfovibrio desulfuricans G20, the gene encoding the preapoprotein was cloned, sequenced, and mutated by plasmid insertion. The physical analysis of the DNA from the strain carrying the integrated plasmid showed that the insertion was successful. The growth rate of the mutant on lactate with sulfate was comparable to that of the wild type; however, mutant cultures did not achieve the same cell densities. Pyruvate, the oxidation product of lactate, served as a poor electron source for the mutant. Unexpectedly, the mutant was able to grow on hydrogen-sulfate medium. These data support a role for tetraheme cytochrome c(3) in the electron transport pathway from pyruvate to sulfate or sulfite in D. desulfuricans G20.

Sequencing the gene encoding desulfovibrio desulfuricans ATCC 27774 nine-heme cytochrome c

Contradicting early suggestions, the sequencing of the gene encoding the Desulfovibrio desulfuricans (ATCC 27774) nine-heme cytochrome c proves that this cytochrome is not the product of the degradation of the 16-heme containing cytochrome c [Coelho et al. (1996) Acta Cryst. D52, 1202-1208]. However, preliminary data indicate that the cytochrome gene is part of an operon similar to the DvH hmc operon, which contains the gene coding for the 16-heme cytochrome c [Rossi et al. (1993) J. Bacteriol. 175, 4699-4711]. Also, the amino acid sequence deduced from the DNA sequence shows four residues in the C-terminal not predicted in the amino acid sequence obtained by X-ray methods [Matias et al. (1999) Structure 7, 119-130].

Crystal structure of the oxidised and reduced acidic cytochrome c3from Desulfovibrio africanus

Unique among sulphate-reducing bacteria, Desulfovibrio africanus has two periplasmic tetraheme cytochromes c3, one with an acidic isoelectric point which exhibits an unusually low reactivity towards hydrogenase, and another with a basic isoelectric point which shows the usual cytochrome c3reactivity. The crystal structure of the oxidised acidic cytochrome c3of Desulfovibrio africanus (Dva.a) was solved by the multiple anomalous diffraction (MAD) method and refined to 1.6 A resolution. Its structure clearly belongs to the same family as the other known cytochromes c3, but with weak parentage with those of the Desulfovibrio genus and slightly closer to the cytochromes c3of Desulfomicrobium norvegicum. In Dva.a, one edge of heme I is completely exposed to the solvent and surrounded by a negatively charged protein surface. Heme I thus seems to play an important role in electron exchange, in addition to heme III or heme IV which are the electron exchange ports in the other cytochromes c3. The function of Dva.a and the nature of its redox partners in the cell are thus very likely different. By alignment of the seven known 3D structures including Dva.a, it is shown that the structure which is most conserved in all cytochromes c3is the four-heme cluster itself. There is no conserved continuous protein structure which could explain the remarkable invariance of the four-heme cluster. On the contrary, the proximity of the heme edges is such that they interact directly by hydrophobic and van der Waals contacts. This direct interaction, which always involves a pyrrole CA-CB side-chain and its bound protein cysteine Sgammaatom, is probably the main origin of the four-heme cluster stability. The same kind of interaction is found in the chaining of the hemes in other multihemic redox proteins.The crystal structure of reduced Dva. a was solved at 1.9 A resolution. The comparison of the oxidised and reduced structures reveals changes in the positions of water molecules and polar residues which probably result from changes in the protonation state of amino acids and heme propionates. Water molecules are found closer to the hemes and to the iron atoms in the reduced than in the oxidised state. A global movement of a chain fragment in the vicinity of hemes III and IV is observed which result very likely from the electrostatic reorganization of the polypeptide chain induced by reduction.

[3Fe-4S] to [4Fe-4S] cluster conversion in Desulfovibrio fructosovorans [NiFe] hydrogenase by site-directed mutagenesis

The role of the high potential [3Fe-4S]1+,0 cluster of [NiFe] hydrogenase from Desulfovibrio species located halfway between the proximal and distal low potential [4Fe-4S]2+,1+ clusters has been investigated by using site-directed mutagenesis. Proline 238 of Desulfovibrio fructosovorans [NiFe] hydrogenase, which occupies the position of a potential ligand of the lacking fourth Fe-site of the [3Fe-4S] cluster, was replaced by a cysteine residue. The properties of the mutant enzyme were investigated in terms of enzymatic activity, EPR, and redox properties of the iron-sulfur centers and crystallographic structure. We have shown on the basis of both spectroscopic and x-ray crystallographic studies that the [3Fe-4S] cluster of D. fructosovorans hydrogenase was converted into a [4Fe-4S] center in the P238 mutant. The [3Fe-4S] to [4Fe-4S] cluster conversion resulted in a lowering of approximately 300 mV of the midpoint potential of the modified cluster, whereas no significant alteration of the spectroscopic and redox properties of the two native [4Fe-4S] clusters and the NiFe center occurred. The significant decrease of the midpoint potential of the intermediate Fe-S cluster had only a slight effect on the catalytic activity of the P238C mutant as compared with the wild-type enzyme. The implications of the results for the role of the high-potential [3Fe-4S] cluster in the intramolecular electron transfer pathway are discussed.

Characterization of the cytochromes C from Desulfovibrio desulfuricans G201

A monoheme cytochrome c553 and a hexadecaheme high molecular weight cytochrome (Hmc) have been isolated and characterized from the sulfate-reducing bacteria Desulfovibrio desulfuricans G201, in addition to the tetraheme cytochrome c3 (Mr 13000) that has been previously described. Both cytochromes are homologous with respect to several biochemical properties to the corresponding cytochromes found in other Desulfovibrio species. However, they are acidic proteins while the corresponding molecules, isolated from other Desulfovibrio species, are relatively more basic. The D. desulfuricans cytochrome content appears identical to that of D. vulgaris Hildenborough. Isolation of these cytochromes from a Desulfovibrio desulfuricans strain is of great interest in order to get more insight on the physiological function of these molecules.

Further characterization of the two tetraheme cytochromes c3 from Desulfovibiro africanus: nucleotide sequences, EPR spectroscopy and biological activity

The genes encoding the basic and acidic tetraheme cytochromes c3 from Desulfovibrio africanus have been sequenced. The corresponding amino acid sequences of the basic and acidic cytochromes c3 indicate that the mature proteins consist of a single polypeptide chain of 117 and 103 residues, respectively. Their molecular masses, 15102 and 13742 Da, respectively, determined by mass spectrometry, are in perfect agreement with those calculated from their amino acid sequences. Both D. africanus cytochromes c3 are synthesized as precursor proteins with signal peptides of 23 and 24 residues for the basic and acidic cytochromes, respectively. These cytochromes c3 exhibit the main structural features of the cytochrome c3 family and contain the 16 strictly conserved cysteine + histidine residues directly involved in the heme binding sites. The D. africanus acidic cytochrome c3 differs from all the other homologous cytochromes by its low content of basic residues and its distribution of charged residues in the amino acid sequence. The presence of four hemes per molecule was confirmed by EPR spectroscopy in both cytochromes c3. The g-value analysis suggests that in both cytochromes, the angle between imidazole planes of the axial histidine ligands is close to 90 degrees for one heme and much lower for the three others. Moreover, an unusually high exchange interaction (approximately 10[-2] cm[-1]) was evidenced between the highest potential heme (-90 mV) and one of the low potential hemes in the basic cytochrome c3. The reactivity of D. africanus cytochromes c3 with heterologous [NiFe] and [Fe] hydrogenases was investigated. Only the basic one interacts with the two types of hydrogenase to achieve efficient electron transfer, whereas the acidic cytochrome c3 exchanges electrons specifically with the basic cytochrome c3. The difference in the specificity of the two D. africanus cytochromes c3 has been correlated with their highly different content of basic and acidic residues.

A single mutation in the heme 4 environment of Desulfovibrio desulfuricans Norway cytochrome c3 (Mr 26,000) greatly affects the molecule reactivity

The gene encoding Desulfovibrio desulfuricans Norway cytochrome c3 (Mr 26,000), a dimeric octaheme cytochrome belonging to the polyheme cytochrome c3 superfamily, has been cloned and successfully expressed in another sulfate reducing bacteria, D. desulfuricans G201. The gene, named cycD, is monocistronic and encodes a cytochrome precursor of 135 amino acids with an extension at the NH2 terminus of 24 amino acids. This extension acts as a signal sequence which allows export across the cytoplasmic membrane into the periplasmic space. Tyrosine 73, which is in a close contact with the histidine sixth axial ligand to the heme 4 iron atom, has been replaced by a glutamate residue using site-directed mutagenesis. The cytochrome mutant when expressed in D. desulfuricans G201, is correctly folded and matured. A global increase of the oxidoreduction potentials of about 50 mV is measured for the Y73E cytochrome. The mutation also has a strong influence on the interaction of the cytochrome with its redox partner, the hydrogenase. This suggests, like the tetraheme cytochrome c3 (Mr 13, 000), heme 4 is the interactive heme in the cytochrome-hydrogenase complex and that alteration of the heme 4 environment can greatly affect the electron transfer reaction with its redox partner.

The cytochrome c3 superfamily: amino acid sequence of a dimeric octahaem cytochrome c3 (M(r) 26,000) isolated from Desulfovibrio gigas

Cytochrome c3 (M(r) 26000) isolated from Desulfovibrio gigas is a dimeric cytochrome consisting of two identical subunits of 109 amino acids, each of which contains four haem groups. On the basis of its amino acid sequence, this cytochrome clearly belongs to the cytochrome c3 superfamily, and will be classified in class III of the c-type cytochromes as defined by Ambler [(1980) in From Cyclotrons to Cytochromes (Robinson, A. B. and Kaplan, N. O., eds.), pp. 263-279, Academic Press, London]. It contains ten cysteine and nine histidine residues in each subunit, and eight cysteines and eight histidines linked to the four haem groups were found to be invariant on alignment of all known cytochrome c3 sequences. Two intermolecular disulphide bridges have been determined between cysteine residues 5 and 46 of the two monomers. Cytochrome c3 (M(r) 26,000) from D gigas is clearly different from cytochrome c3 (M(r) 13,000) from the same strain, with which it shows only 27% sequence identity. Compared with cytochrome c3 (M(r) 26,000) from D. desulfuricans Norway, the three-dimensional structure of which has been determined, 26.95% of the residues have been conserved. In the enzyme from D. desulfuricans Norway, hydrophobic interactions have been described across the dimer interface. Residues involved in similar interactions seem to be well conserved in the equivalent D. gigas cytochrome. This sequence provides structural data to allow specification of this new subclass of polyhaem cytochromes. Furthermore, D. gigas cytochrome c3 (M(r) 26,000) is the first polyhaem cytochrome shown to contain two disulphide bridges linking two identical subunits, which could induce more rigid folding. The folding and the evolution of this family of polyhaem cytochromes are discussed.