Phospholipid polymers--synthesis and spectral characteristics

Photopolymerizable robust lipids towards reliability and their applications

Synthetic lipids have been studied as components in membrane models and drug delivery systems. Polymerizable phospholipids, especially photosensitive ones, can form new bilayer bonds when UV light irradiates. These phospholipids have been known since the 1980s, but in the last few years, new applications have been highlighted. Its use in drug delivery systems is interesting since the photopolymerization reaction produces highly stable vesicles. Additionally, the rearrangement of the acyl chains during the photopolymerization process can be applied in the generation of pores, resulting in systems that serve for drug-controlled release. In this article, our goal was to envision earlier photopolymers' publications towards the implications of these versatile phospholipids that led to proposed systems for drug delivery and controlled release of drugs at specific sites. This review offers a broad background towards a simple, reliable, and robust platform to make its application available.

Structures and strategies for enhanced sensitivity of polydiacetylene(PDA) based biosensor platforms

Polydiacetylene (PDA) is a versatile polymer that has been studied in numerous fields because of its unique optical properties derived from alternating multiple bonds in the polymer backbone. The conjugated structure in the polymer backbone enables PDA to possess the ability of blue-red colorimetric transition when π-π interactions in the PDA backbone chain are disturbed by the external environment. The chromatic property of PDA disturbed by external stimuli can also emit fluorescence in the red region. Owing to the unique characteristics of PDA, it has been widely studied in facile and label-free sensing applications based on colorimetric or fluorescence signals for several decades. Among the various PDA structures, membrane structures assembled by amphiphilic molecules are widely used as a versatile platform because facile modification of the synthetic membrane provides extensive applications, such as receptor-ligand interactions, resulting in potent biosensors. To use PDA as a sensory material, several methods have been studied to endow the specificity to PDA molecules and to amplify the signal from PDA supramolecules. This is because selective and sensitive detection of target materials is required at an appropriate level corresponding to each material for applicable sensor applications. This review focuses on factors that affect the sensitivity of PDA composites and several strategies to enhance the sensitivity of the PDA sensor to various structures. Owing to these strategies, the PDA sensor system has achieved a higher level of sensitivity and selectivity, enabling it to detect multiple target materials for a full field of application.

Membrane-Associated Nucleobase-Functionalized β-Peptides (β-PNAs) Affecting Membrane Support and Lipid Composition

Protein-membrane interactions are essential to maintain membrane integrity and control membrane morphology and composition. Cytoskeletal proteins in particular are known to interact to a high degree with lipid bilayers and to line the cytoplasmic side of the plasma membrane with an extensive network structure. In order to gain a better mechanistical understanding of the protein-membrane interplay and possible membrane signaling, we started to develop a model system based on β-peptide nucleic acids (β-PNAs). These β-peptides are known to form stable hydrogen-bonded aggregates due to their helical secondary structure, which serve to pre-organize the attached nucleobases. After optimization of the β-PNA solid-phase peptide synthesis and validation of helix formation, the ability of the novel β-PNAs to dimerize and interact with lipid bilayers was investigated by both fluorescence and circular dichroism spectroscopy. It was shown that duplex formation occurs rapidly and with high specificity and could also be detected on the surfaces of the lipid bilayers. Hereby, the potential of a β-PNA-based peptide system to mimic membrane-associated protein networks could be demonstrated.

Lipopolymers and lipids from lung surfactants in association with N-acetyl-l-cysteine: Characterization and cytotoxicity

In the present work, we obtained polymeric diacetylene liposomes that can associate N-Acetyl-l-Cysteine (NAC), a broad spectrum mucolytic. The reason for studying these formulations is that they could be applied in the future as NAC delivery systems, with a possible dose reduction but maintaining its effect. Liposomes used herein are obtained by a photopolymerization reaction, thus gaining stability and rigidity. Lipids belonging to lung surfactant were added in different ratios to the formulations in order to maximize its possible interaction with the lung tissue. Because of lipopolymer stability, the oral or nasal route could be appropriated. This formulation could efficiently transport NAC to exert its mucolytic activity and help in diseases such as cystic fibrosis, which has abnormal mucus production. Also, this type of treatment could be useful in other types of diseases, interacting with the mucus layer and making the lung tissue more permeable to other therapies. Formulations so obtained presented high levels of polymerization. Also, they present small hollow fibers structures with a high number of polymeric units. These types of arrangements could present advantages in the field of drug delivery, giving the possibility of a controlled release. Lipopolymers with lipids from lung surfactant associated with NAC are promising complexes in order to treat not only respiratory illnesses. The stability of the formulation would allow its inoculation through other routes such as the oral one, helping the reposition of NAC as an antioxidant drug. Finally, these formulations are non-toxic and easy to produce.

Photopolymerized microdomains in both lipid leaflets establish diffusive transport pathways across biomimetic membranes

Controlled transport within a network of aqueous subcompartments provides a foundation for the construction of biologically-inspired materials. These materials are commonly assembled using the droplet interface bilayer (DIB) technique, adhering droplets together into a network of lipid membranes. DIB structures may be functionalized to generate conductive pathways by enhancing the permeability of pre-selected membranes, a strategy inspired by nature. Traditionally these pathways are generated by dissolving pore-forming toxins (PFTs) in the aqueous phase. A downside of this approach when working with larger DIB networks is that transport is enabled in all membranes bordering the droplets containing the PFT, instead of occurring exclusively between selected droplets. To rectify this limitation, photopolymerizable phospholipids (23:2 DiynePC) are incorporated within the aqueous phase of the DIB platform, forming conductive pathways in the lipid membranes post-exposure to UV-C light. Notably these pathways are only formed in the membrane if both adhered droplets contain the photo-responsive lipids. Patterned DIB networks can then be generated by controlling the lipid composition within select droplets which creates conductive routes one droplet thick. We propose that the incorporation of photo-polymerizable phospholipids within the aqueous phase of DIB networks will improve the resolution of the patterned conductive pathways and reduce diffusive loss within the synthetic biological network.

Standing, lying, and sitting: translating building principles of the cell membrane to synthetic 2D material interfaces

Lessons can be drawn from cell membranes in controlling noncovalent functionalization of 2D materials to optimize interactions with the environment.

Sitting Phase Monolayers of Polymerizable Phospholipids Create Dimensional, Molecular-Scale Wetting Control for Scalable Solution-Based Patterning of Layered Materials

The use of dimensionally ordered ligands on layered materials to direct local electronic structure and interactions with the environment promises to streamline integration into nanostructured electronic, optoelectronic, sensing, and nanofluidic interfaces. Substantial progress has been made in using ligands to control substrate electronic structure. Conversely, using the exposed face of the ligand layer to structure wetting and binding interactions, particularly with scalable solution- or spray-processed materials, remains a significant challenge. However, nature routinely utilizes wetting control at scales from nanometer to micrometer to build interfaces of striking geometric precision and functional complexity, suggesting the possibility of leveraging similar control in synthetic materials. Here, we assemble striped "sitting" phases of polymerizable phospholipids on highly oriented pyrolytic graphite, producing a surface consisting of 1 nm wide hydrophilic stripes alternating with 5 nm wide hydrophobic stripes. Protruding, strongly wetting headgroup chemistries in these monolayers enable formation of rodlike wetted patterns with widths as little as ∼6 nm and lengths up to 100 nm from high-surface-tension liquids (aqueous solutions of glycerol) commonly utilized to assess interfacial wetting properties at larger length scales. In contrast, commonly used lying-down phases of diynoic acids with in-plane headgroups do not promote droplet sticking or directional spreading. These results point to a broadly applicable strategy for achieving high-resolution solution-based patterning on layered materials, utilizing nanometer-wide patterns of protruding, charged functional groups in a noncovalent monolayer to define pattern edges.

Can PEI microgels become biocompatible upon betainization?

Polyethylene imine (PEI) microgels prepared via micro emulsion polymerization technique were treated with 1,3-propane sultone to obtained betainized PEI (b-PEI) microgels. The betainization reaction generated zwitterions on PEI microgel that are positive charges from quarternized amine groups of PEI, and the newly formed negative charges from SO₃^- groups from the modifying agent, 1,3-propane sultone offered interesting properties. The smaller size of b-PEI microgels that are obtained by simple filtration were increased with betainization from 512±14 to 1114±86nm. Also, the betainization of PEI microgel provided negative zeta potential values at high pH values as 9, 10, 11, and 12. Moreover, the b-PEI microgels render more effective dye absorption capabilities for anionic or cationic organic dyes such as Methyl Orange (MO) and Methylene Blue (MB) separately with the significant increase dye adsorption capacity of 354±31 and 274±19mg/g respectively. Moreover, antibacterial properties of b-PEI microgels tested on the E. coli ATCC 8739 and S. aureus ATCC 6538 were diminished whereas bare PEI has low MIC and MBC values (strong antibacterial properties). Interestingly, the PEI microgels known for their strong antibacterial and toxic nature found to be biocompatible upon betainization reaction. The biocompatibility test were carried with WST-1 tests and double staining methods. The cytotoxicity, apoptotic and necrotic cell tests were shown that PEI microgels induce no cytotoxicity up to 400μg/mL whereas PEI microgels possessed 50% toxicity at this concentration, suggesting that b-PEI microgels become biocompatible upon betainization with, 3-propane sultone.

Lipid Cross-Linking of Nanolipoprotein Particles Substantially Enhances Serum Stability and Cellular Uptake

Nanolipoprotein particles (NLPs) consist of a discoidal phospholipid lipid bilayer confined by an apolipoprotein belt. NLPs are a promising platform for a variety of biomedical applications due to their biocompatibility, size, definable composition, and amphipathic characteristics. However, poor serum stability hampers the use of NLPs for in vivo applications such as drug formulation. In this study, NLP stability was enhanced upon the incorporation and subsequent UV-mediated intermolecular cross-linking of photoactive DiynePC phospholipids in the lipid bilayer, forming cross-linked nanoparticles (X-NLPs). Both the concentration of DiynePC in the bilayer and UV exposure time significantly affected the resulting X-NLP stability in 100% serum, as assessed by size exclusion chromatography (SEC) of fluorescently labeled particles. Cross-linking did not significantly impact the size of X-NLPs as determined by dynamic light scattering and SEC. X-NLPs had essentially no degradation over 48 h in 100% serum, which is a drastic improvement compared to non-cross-linked NLPs (50% degradation by ∼10 min). X-NLPs had greater uptake into the human ATCC 5637 bladder cancer cell line compared to non-cross-linked particles, indicating their potential utility for targeted drug delivery. X-NLPs also exhibited enhanced stability following intravenous administration in mice. These results collectively support the potential utility of X-NLPs for a variety of in vivo applications.

Anti-fouling Coatings of Poly(dimethylsiloxane) Devices for Biological and Biomedical Applications

Fouling initiated by nonspecific protein adsorption is a great challenge in biomedical applications, including biosensors, bioanalytical devices, and implants. Poly(dimethylsiloxane) (PDMS), a popular material with many attractive properties for device fabrication in the biomedical field, suffers serious fouling problems from protein adsorption due to its hydrophobic nature, which limits the practical use of PDMS-based devices. Effort has been made to develop biocompatible materials for anti-fouling coatings of PDMS. In this review, typical nonfouling materials for PDMS coatings are introduced and the associated basic anti-fouling mechanisms, including the steric repulsion mechanism and the hydration layer mechanism, are described. Understanding the relationships between the characteristics of coating materials and the accompanying anti-fouling mechanisms is critical for preparing PDMS coatings with desirable anti-fouling properties.

Magnetic nanosensors optimized for rapid and reversible self-assembly

Magnetic nanoparticle-based sensors for MRI have been accelerated to a timescale of seconds using densely-functionalized particles of small size. Parameters that increase response rates also result in large nuclear magnetic relaxation rate and light scattering changes, allowing signals to be detected almost immediately after changes in calcium concentration.

Triggered release of molecules across droplet interface bilayer lipid membranes using photopolymerizable lipids

A combination of nonpolymerizable phospholipids (DPPC or DPhPC) and a smaller amount of cross-linking photopolymerizable phospholipids (23:2 DiynePC) is incorporated in an unsupported artificial lipid bilayer formed using the droplet interface bilayer (DIB) approach. The DIB is formed by contacting lipid monolayer-coated aqueous droplets against each other in a dodecane-lipid medium. Cross-linking of the photopolymerizable lipids incorporated in the DIB was obtained by exposure to UV-C radiation (254 nm), resulting in pore formation. The effect of cross-linking on the DIB properties was characterized optically by measuring the diffusion of selectively encapsulated dye molecules (calcein) from one droplet of the DIB to the other droplet. Changes in DIB conductivity due to UV-C exposure were investigated using current-voltage (I-V) measurements. The leakage of dye molecules across the DIB and the increase in DIB conductivity after UV-C exposure indicates the formation of membrane pores. The results indicate that the DIB approach offers a simple and flexible platform for studying phototriggered drug delivery systems in vitro.

Material properties of matrix lipids determine the conformation and intermolecular reactivity of diacetylenic phosphatidylcholine in the lipid bilayer

Photopolymerizable phospholipid DC(8,9)PC (1,2-bis-(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) exhibits unique assembly characteristics in the lipid bilayer. Because of the presence of the diacetylene groups, DC(8,9)PC undergoes polymerization upon UV (254 nm) exposure and assumes chromogenic properties. DC(8,9)PC photopolymerization in gel-phase matrix lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monitored by UV-vis absorption spectroscopy occurred within 2 min after UV treatment, whereas no spectral shifts were observed when DC(8,9)PC was incorporated into liquid-phase matrix 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC). Liquid chromatography-tandem mass spectrometry analysis showed a decrease in the amount of DC(8,9)PC monomer in both DPPC and POPC environments without any change in the matrix lipids in UV-treated samples. Molecular dynamics (MD) simulations of DPPC/DC(8,9)PC and POPC/DC(8,9)PC bilayers indicate that the DC(8,9)PC molecules adjust to the thickness of the matrix lipid bilayer. Furthermore, the motions of DC(8,9)PC in the gel-phase bilayer are more restricted than in the fluid bilayer. The restricted motional flexibility of DC(8,9)PC (in the gel phase) enables the reactive diacetylenes in individual molecules to align and undergo polymerization, whereas the unrestricted motions in the fluid bilayer restrict polymerization because of the lack of appropriate alignment of the DC(8,9)PC fatty acyl chains. Fluorescence microscopy data indicates the homogeneous distribution of lipid probe 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-lissamine rhodamine B sulfonyl ammonium salt (N-Rh-PE) in POPC/DC(8,9)PC monolayers but domain formation in DPPC/DC(8,9)PC monolayers. These results show that the DC(8,9)PC molecules cluster and assume the preferred conformation in the gel-phase matrix for the UV-triggered polymerization reaction.

Polymeric lipid assemblies as novel theranostic tools

Polymerizable lipids have been used in research and medical applications such as membrane models, imaging platforms, drug delivery systems, vaccine carriers, biosensors, and coating materials. The polymerization of these lipid molecules forms a covalent bond between lipid moieties, which improves the noncovalent interactions that maintain the lipid lamellar phase architecture and increases the stability of the polymerized system. Because such lipid molecules form nanoassemblies with modifiable structures that acquire the stability of polymers following covalent bond formation, these lipids are of considerable interest in the emerging field of theranostics. In this Account, we summarize the biomedical applications of polymerizable lipids (primarily phospholipids) in the context of various nanoplatforms. We discuss stable nanoplatforms, which have been used in a variety of theranostics applications. In addition, we describe methods for assembling triggerable theranostics by combining appropriate nonpolymerizable lipids with polymerizable lipids. Polymeric lipids hold promise as nanotools in the field of medical imaging, targeting, and on-demand drug delivery. Because of their similarity to biological lipids, long-term toxicity issues from polymerizable lipid nanoplatforms are predicted to be minimal. Although the field of polymeric nanocapsules is still in development, intensive efforts are underway to produce systems which could be applied to disease diagnosis and treatment. We envision that nanoimaging platforms coupled with localized drug delivery technology will have a significant impact on cancer therapy and other related diseases. The existing wealth of clinical knowledge both in the photochemistry of imaging agents and/or drugs and modifications of these agents using light will prove valuable in the further development of polymeric theranostic lipid-based nanoparticles.

Interface of covalently bonded phospholipids with a phosphorylcholine head: characterization, protein nonadsorption, and further functionalization

Surface anchored poly(methylhydrosiloxane) (PMHS) thin films on oxidized silicon wafers or glass substrates were functionalized via the SiH hydrosilylation reaction with the internal double bonds of 1,2-dilinoleoyl-sn-glycero-3-phosphorylcholine (18:2 Cis). The surface was characterized by X-ray photoelectron spectroscopy, contact angle measurements, atomic force microscopy, and scanning electron microscopy. These studies showed that the PMHS top layer could be efficiently modified resulting in an interfacial high density of phospholipids. Grafted phospholipids made the initially hydrophobic surface (θ = 106°) very hydrophilic and repellent toward avidin, bovine serum albumin, bovine fibrinogen, lysozyme, and α-chymotrypsin adsorption in phosphate saline buffer pH 7.4. The surface may constitute a new background-stable support with increased biocompatibility. Further possibilities of functionalization on the surface remain available owing to the formation of interfacial SiOH groups by Karstedt-catalyzed side reactions of SiH groups with water. The presence of interfacial SiOH groups was shown by zeta potential measurements. The reactivity and surface density of SiOH groups were checked by fluorescence after reaction of a monoethoxy silane coupling agent bearing Alexa as fluorescent probe.

Polymerized surfactant vesicles: novel membrane mimetic systems

Vesicles formed from dialkyl surfactants containing vinyl, methacrylate, diacetylene, isocyano, and styrene groups have been stabilized by polymerization across their bilayers of head groups. Polymerized vesicles have shelf lives of many months and controllable permeabilities and sizes. The kinetics of surfactant vesicle photopolymerzation have been determined, and the mechanism of photopolymerization has been discussed as a two-dimensional surface process. Polymerized surfactant vesicles concentrate reagents in their aqueous interiors, in bilayers, and in their inner or outer surfaces. This, in turn, leads to altered reaction rates and sites. Polymerized surfactant vesicles also provide a good media for the generation, in situ, of small, uniform, and efficient colloidal catalysts.

Structure of lipid tubules formed from a polymerizable lecithin

We have studied tubules formed from a polymerizable lipid in aqueous dispersion using freeze-fracture replication and transmission electron microscopy. The polymerizable diacetylenic lecithin 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine converts from liposomes to hollow cylinders, which we call tubules, on cooling through its chain melting phase transition temperature. These tubules differ substantially from cochleate cylinders formed by phosphatidylserines on binding of calcium. The tubules have diameters that range from 0.3 to 1 mum and lengths of up to hundreds of micrometers depending on conditions of formation. The thickness of the walls varies from as few as two bilayers to tens of bilayers in some longer tubules. Their surfaces may be either smooth, gently rippled, or with spiral steps depending on sample preparation conditions, including whether the lipids have been polymerized. The spiral steps may reflect the growth of the tubules by rolling up of flattened liposomes.

Light scattering investigation of electric field alignment of phospholipid tubules

The polymerizable diacetylenic phospholipid 1,2-bis(10,12,tricosadiynoyl)-sn-glycero-3-phosphocholine (DC(23)PC) forms straight hollow cylinders in water. Using an ac electric field it was possible to achieve significant orientational alignment of the tubules parallel to the field direction, and from light scattering results deduce an effective dielectric susceptibility anisotropy Deltachi(E). Moreover, we suggest that the alignment arises from an orientational anisotropy of the total electrostatic enthalpy for a dielectric tubule in an electric field, rather than an inherent polarizability anisotropy of the constituent DC(23)PC molecules, as was the case with magnetic field alignment.

DESIGN OF LIPOSOMES CONTAINING PHOTOPOLYMERIZABLE PHOSPHOLIPIDS FOR TRIGGERED RELEASE OF CONTENTS

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC(8,9)PC (1,2- bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0-45 minutes at 25 degrees C resulted in photo-polymerization of DC(8,9)PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC(8,9)PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC(8,9)PC but not from Egg PC/DC(8,9)PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.

Two-dimensional polymers: just a dream of synthetic chemists?

In light of the considerable impact synthetic 2D polymers are expected to have on many fundamental and applied aspects of the natural and engineering sciences, it is surprising that little research has been carried out on these intriguing macromolecules. Although numerous approaches have been reported over the last several decades, the synthesis of a one monomer unit thick, covalently bonded molecular sheet with a long-range ordered (periodic) internal structure has yet to be achieved. This Review provides an overview of these approaches and an analysis of how to synthesize 2D polymers. This analysis compares polymerizations in (initially) a homogeneous phase with those at interfaces and considers structural aspects of monomers as well as possibly preferred connection modes. It also addresses issues such as shrinkage as well as domain and crack formation, and briefly touches upon how the chances for a successful structural analysis of the final product can possibly be increased.

Adsorption of fibrinogen and lysozyme on silicon grafted with poly(2-methacryloyloxyethyl phosphorylcholine) via surface-initiated atom transfer radical polymerization

Surfaces based on grafted poly(2-methacryloyloxyethyl phosphorylcholine) (poly(MPC)) "brushes" with a constant graft density of 0.39 chain/nm2 and chain length from 5 to 200 monomer units were prepared by surface-initiated atom transfer radical polymerization (ATRP) on silicon wafers. The chain length and layer thickness of the poly(MPC) grafts were varied via the ratio of MPC to sacrificial initiator. The surfaces were characterized by water contact angle, XPS, and AFM. The effect of poly(MPC) chain length on fibrinogen and lysozyme adsorption was studied in TBS buffer at pH 7.4. The adsorption of both proteins on the poly(MPC)-grafted surfaces was greatly reduced compared to the unmodified silicon. Adsorption decreased with increasing chain length of the poly(MPC) grafts. Grafts of chain length 200 (MW 59 000) gave adsorption levels of 7 and 2 ng/cm2, respectively, for fibrinogen and lysozyme at 1 mg/mL protein concentration, corresponding to reductions of greater than 98% compared to the unmodified silicon. Adsorption experiments using mixtures of the two proteins showed that the suppression of protein adsorption on the poly(MPC)-grafted surfaces was not strongly dependent on protein size or charge.

Characterization of diacetylenic liposomes as carriers for oral vaccines

In order to evaluate liposomes as vehicle for oral vaccines the characterization and stability of polymerized and non-polymerized liposomes were examined. Mixtures of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3 phosphocholine) (DC8,9PC) with saturated 1,2-dimiristoyl-sn-glycero-3-phosphocholine in molar ratio 1:1 were used. Saturated and non-saturated lipids were combined to give a chemically modified membrane by UV polymerization derived from DC8,9PC. Characterization was carried out by electronic microscopy, differential scanning calorimetry (DSC) and by hydrophobicity factor (HF). The stability towards the digestive tract (including saliva): acidic solutions, bile and pancreatin are compared to buffer pH 7.4, measuring the release of Glucose-6-phosphate or bovine plasma albumin entrapment. The polymerized liposomes showed further augmentation of the HF and the size. DSC showed phase separation and lower Tt if compared to data obtained for DC8,9PC. The HF, as main factor is discussed in relation to in vitro stability, suggesting that polymerized and non-polymerized liposomes would serve effectively as an oral delivery vehicle.