The transition of alpha-helix to beta-structure of poly(L-lysine) induced by phosphatidic acid vesicles and its kinetics at alkaline pH

Effect of peptide secondary structure on adsorption and adsorbed film properties on end-grafted polyethylene oxide layers

Poly-l-lysine (PLL), in α-helix or β-sheet configuration, was used as a model peptide for investigating the effect of secondary structures on adsorption events to poly(ethylene oxide) (PEO) modified surfaces formed using θ solvents. Circular dichroism results showed that the secondary structure of PLL persisted upon adsorption to Au and PEO modified Au surfaces. Quartz crystal microbalance with dissipation (QCM-D) was used to characterize the chemisorbed PEO layer in different solvents (θ and good solvents), as well as the sequential adsorption of PLL in different secondary structures (α-helix or β-sheet). QCM-D results suggest that chemisorption of PEO 750 and 2000 from θ solutions led to brushes 3.8 ± 0.1 and 4.5 ± 0.1 nm thick with layer viscosities of 9.2 ± 0.8 and 4.8 ± 0.5 cP, respectively. The average number of H2O per ethylene oxides, while in θ solvent, was determined as ~0.9 and ~1.2 for the PEO 750 and 2000 layers, respectively. Upon immersion in good solvent (as used for PLL adsorption experiments), the number of H2O per ethylene oxides increased to ~1.5 and ~2.0 for PEO 750 and 2000 films, respectively. PLL adsorbed masses for α-helix and β-sheet on Au sensors was 231 ± 5 and 1087 ± 14 ng cm(-2), with layer viscosities of 2.3 ± 0.1 and 1.2 ± 0.1 cP, respectively; suggesting that the α-helix layer was more rigid, despite a smaller adsorbed mass, than that of β-sheet layers. The PEO 750 layer reduced PLL adsorbed amounts to ~10 and 12% of that on Au for α-helices and β-sheets respectively. The PLL adsorbed mass to PEO 2000 layers dropped to ~12% and 4% of that on Au, for α-helix and β-sheet respectively. No significant differences existed for the viscosities of adsorbed α-helix and β-sheet PLL on PEO surfaces. These results provide new insights into the fundamental understanding of the effects of secondary structures of peptides and proteins on their surface adsorption.

Effect of peptide secondary structure on adsorption and adsorbed film properties

Protein adsorption at the biomaterial-tissue interface is of utmost importance to the widespread application of engineered materials. The present study asked what role the secondary structures of peptides play in their adsorption, as well as how these structures affect the physicochemical properties of the final adsorbed layer. To this end, α-helices and β-sheets were induced in poly-l-lysine, and their adsorption to Au surfaces was monitored using quartz crystal microbalance with dissipation. It was observed that secondary structures played an important role in governing both the adsorption process and the final film properties. Higher initial adsorption rates were obtained for α-helices compared with β-sheets, regardless of solution salt concentration. Adsorption half-time for β-sheets was greater than that for α-helices, and the final amount adsorbed on β-sheet was significantly higher than that on α-helix. The adsorbed amount and adsorption half-time decreased with increasing salt concentration, suggesting that electrostatic interactions played a role. It was found that the differences in Zeta potential coupled with the apparent effect of surface contact area differences between α-helix and β-sheet conformations are ultimately responsible for these different peptide adsorption behaviours at the Au interface. The initial adsorption rate of α-helix increased with salt concentrations up to 50mM, whereas β-sheet initial adsorption rates increased with salt concentrations up to 500 mM. Viscosities for films formed from α-helices were about twice those of β-sheets films, regardless of solution ionic strength. It was evident that the peptide secondary structures influence all aspects of their adsorption, as well as affecting the adsorbed film properties.

The effect of a peptide-containing synthetic lung surfactant on gas exchange and lung mechanics in a rabbit model of surfactant depletion

Background

Currently, a new generation of synthetic pulmonary surfactants is being developed that may eventually replace animal-derived surfactants used in the treatment of respiratory distress syndrome. Enlightened by this, we prepared a synthetic peptide-containing surfactant (Synsurf) consisting of phospholipids and poly-l-lysine electrostatically bonded to poly-l-glutamic acid. Our objective in this study was to investigate if bronchoalveolar lavage (BAL)-induced acute lung injury and surfactant deficiency with accompanying hypoxemia and increased alveolar and physiological dead space is restored to its prelavage condition by surfactant replacement with Synsurf, a generic prepared Exosurf, and a generic Exosurf containing Ca²⁺.

Methods

Twelve adult New Zealand white rabbits receiving conventional mechanical ventilation underwent repeated BAL to create acute lung injury and surfactant-deficient lung disease. Synthetic surfactants were then administered and their effects assessed at specified time points over 5 hours. The variables assessed before and after lavage and surfactant treatment included alveolar and physiological dead space, dead space/tidal volume ratio, arterial end-tidal carbon dioxide tension (PCO₂) difference (mainstream capnography), arterial blood gas analysis, calculated shunt, and oxygen ratios.

Results

BAL led to acute lung injury characterized by an increasing arterial PCO₂ and a simultaneous increase of alveolar and physiological dead space/tidal volume ratio with no intergroup differences. Arterial end-tidal PCO₂ and dead space/tidal volume ratio correlated in the Synsurf, generic Exosurf and generic Exosurf containing Ca²⁺ groups. A significant and sustained improvement in systemic oxygenation occurred from time point 180 minutes onward in animals treated with Synsurf compared to the other two groups (P < 0.001). A statistically significant decrease in pulmonary shunt (P < 0.001) was found for the Synsurf-treated group of animals, as well as radiographic improvement in three out of four animals in that group.

Conclusion

In general, surfactant-replacement therapy in the animals did not fully restore the lung to its prelavage condition. However, our data show that the formulated surfactant Synsurf improves oxygenation by lowering pulmonary shunt.

Double-shell gold nanoparticle-based DNA-carriers with poly-L-lysine binding surface

In view of the prospective applications of polyamine coatings in functional gold nanoparticles for use as carriers in gene delivery systems, in tissue repair and as bactericidal and virucidal non-toxic vehicle, we have investigated the interactions of poly-l-lysine (PLL) with gold nanoparticles (AuNP). Since direct binding of PLL to AuNP is not strong at neutral pH, we have focused on PLL interactions with carboxylated self-assembled monolayers (SAM) on AuNP, such as the citrate-capped AuNP. The double-shell nanoparticles AuNP@Cit/PLL thus produced do not contain any toxic thiols. We have observed strong electrostatic interactions between polycationic chains of PLL and AuNP@Cit in weakly acidic to weakly alkaline solutions (pH 5-9), as evidenced by the bathochromic shift of the local surface plasmon (SP) band and strong increase in resonance elastic light scattering (RELS) intensity. The stoichiometry of interactions evaluated on the basis of RELS data indicates on a hyper-Langmuirian type of interactions with stoichiometric coefficient n = 1.35 (PLL : AuNP@Cit). From the RELS titration data, a shift of the deprotonation constant for the bound PLL has been determined (pK(a) = 11.6 for the bound PLL vs. 10.48 for the free PLL). The deprotonation of PLL leads to AuNP aggregate disassembly, evidenced by sharp RELS decline and hypsochromic shift of SP band. We have found that under these conditions, a residual aggregation due to the interparticle interactions between β-sheets of PLL overcoat become predominant. The molecular dynamics simulations indicate that multiple hydrogen bonds can also be formed between the PLL linker and the shell molecules of AuNP@Cit. The double-shell nanoparticles, AuNP@Cit/PLL, have been shown to attract DNA molecules using highly sensitive RELS measurements presenting the proof-of-concept for the suitability of this non-toxic nanostructured material for gene delivery applications. The advantage of the proposed material is no toxicity related to the ligand release in gene delivery processes in contrast to the thiol-functionalized AuNP.

Secondary and tertiary polydiallylammonium salts: novel polymers with high antimicrobial activity

Antimicrobial activity of secondary and tertiary poly(diallylammonium) salts (PDAAs) had not been reported before. Due to difficulties with preparation of polymers from the monomers of the diallylamine (DAA) series in the nonquaternary form, up to recently it was not possible to obtain PDAAs with a sufficiently high molecular mass. Here, we describe the investigations of antimicrobial activity of novel water-soluble cationic polyelectrolytes of the PDAA series, namely secondary poly(diallylammonium trifluoroacetate) (PDAATFA) and tertiary poly(diallylmethylammonium trifluoroacetate) (PDAMATFA), in synthesis of which we have recently succeeded, against gram-positive and gram-negative bacteria, and fungi. We have studied the effect of molecular weight (polymeric chain length) and ionic strength of solution on the biocidal efficiency of those polymers; in addition, the concentration dependences of PDAATFA reduced viscosity in salt-free and KCl aqueous solutions have been investigated. The antimicrobial properties of polybase polydiallylamine (BPDAA), which was obtained in an aqueous solution of PDAATFA in presence of alkali, have been also studied as well as biocidal activity of commercial open-chain polybase branched PEI. Those PDAATFA, BPDAA and PEI polymers served as the systems to study the structure-activity relationships. Transmission electronic microscopy study was carried out to characterize the mode of antimicrobial action of PDAATFA using E. coli . It was shown that the synthesized PDAATFA and PDAMATFA exhibit, unlike the quaternary polymers of this series, a rather high biocidal efficiency that is comparable with the activity of known effective cationic polymer biocides or exceeds it. Novel polyelectrolytes exhibit quite strong biocidal properties at different conditions including aqueous solutions of moderate ionic strength (serum, 0.01 M/0.1 M) and aqueous-alkaline solutions (pH 10.5) until the macrochain retains some positive charge, but complete neutralization of the polyelectrolyte in a 1 M salt solution results in the loss of its biocidal activity. The obtained results evidence that the structure of links, which combine the hydrophobic pyrrolidinium rings with the hydrophilic secondary/tertiary ammonium groups, is responsible for the high biocidal activity of the PDAAs. Polymeric nature of the synthesized compounds is one of the most significant factors of their bactericidal efficiency, unlike their high fungicidal activity, which is evidently related to the secondary/tertiary pyrrolidinium cycle.

Polyelectrolyte-coated liposomes: stabilization of the interfacial complexes

Anionic liposomes, composed of egg lecithin (EL) or dipalmitoylphosphatidylcholine (DPPC) with 20 mol% of cardiolipin (CL(2-)), were mixed with cationic polymers, poly(4-vinylpyridine) fully quaternized with ethyl bromide (P2) or poly-L-lysine (PL). Polymer/liposome binding studies were carried out using electrophoretic mobility (EPM), fluorescence, and conductometry as the main analytical tools. Binding was also examined in the presence of added salt and polyacrylic acid (PAA). The following generalizations arose from the experiments: (a) Binding of P2 and PL to small EL/CL(2-) liposomes (60-80 nm in diameter) is electrostatic in nature and completely reversed by addition of salt or PAA. (b) Binding can be enhanced by hydrophobization of the polymer with cetyl groups. (c) Binding can also be enhanced by changing the phase state of the lipid bilayer from liquid to solid (i.e. going from EL to DPPC) or by increasing the size of the liposomes (i.e. going from 60-80 to 300 nm). By far the most promising systems, from the point of view of constructing polyelectrolyte multilayers on liposome cores without disruption of liposome integrity, involve small, liquid, anionic liposomes coated initially with polycations carrying pendant alkyl groups.

Contrasting behavior of zwitterionic and cationic polymers bound to anionic liposomes

Zwitterionic polymers were prepared by quaternizing polyvinylpyridine (DP = 1100) with bromoacids (Br(CH2)nCOOH, where n = 1, 2, 3, and 5). The resulting polymers were then added to unilamellar liposomes composed of egg lecithin or dipalmitoylphosphatidylcholine admixed with 20 mol % of cardiolipin (a phospholipid with two negative charges). These systems were compared (along with polyethylvinylpyridinium chloride, a polycation) by light scattering, electrophoretic mobility, fluorescence, and high-sensitivity differential scanning calorimetry. The external zwitterionic polymers induce no flip-flop of cardiolipin from the inner leaflet to the outer leaflet as does the polycation. Aside from this similarity, the four zwitterionic polymers all behave differently from each other toward the anionic liposomes: (a) For n = 1, there is no detectable interaction between the polymer and the liposomes. (b) For n = 2, electrostatic attraction induces polymer-liposome association (reversed by the addition of NaCl) that maintains the original negative charge on the liposome. Aggregation of the liposomes accompanies polymer adsorption. (c) For n = 3, electrostatic binding also occurs along with aggregation. However, the binding is so strong that NaCl is unable to induce polymer/liposome dissociation. (d) For n = 5, there is polymer binding and NaCl-promoted dissociation but no substantial aggregation. These differences among the closely related polymers are discussed and analyzed in molecular terms.

Complexation of phosphocholine liposomes with polylysine. Stabilization by surface coverage versus aggregation

Complexation between linear poly-L-lysine (PLL) and negatively charged phosphocholine unilamellar liposomes has been investigated by means of dynamic light scattering, microelectrophoresis, and differential scanning calorimetry. It is found that complexation results in charge inversion (vesicle coating/stabilization) or vesicle aggregation depending on various experimental conditions. Complexation in dependence on PLL concentration and molecular mass, lipid phase state, rate and order of liposome and PLL mixing and time evolution of complexes are investigated and discussed. Aggregation profiles are determined and size distribution of the aggregates formed is studied, leading to the possibility of aggregation control. The time evolution of vesicle aggregation shows particle enlargement consisting in particle growth up to the irreversible formation of thermodynamically stable aggregates of about 2 microm in diameter. The formation of stable aggregates is in agreement with theoretical predictions of colloid particles aggregation by an interplay of long range electrostatic repulsion and short range attraction. Differential scanning calorimetry reveals that physical adsorption occurs exclusively on the vesicle surface and the lipidic organization is not significantly disturbed. The present study describes multivariable aspects of the complexation process between liposomes and polyions which results in the formation of a new class of still poorly defined colloids. These results allow establishing and optimization of a procedure for fabrication of polycation-stabilized vesicles to be used for various applications such as drug delivery.

Membrane transport of a polyacid-tied doxorubicin

A model, based on fluorescence data, is developed for the poly(acrylic acid)-assisted transport of doxorubicin, a cationic antitumor drug, through a bilayer membrane. Accordingly, the doxorubicin binds to the poly(acrylic acid) via electrostatic polymer-drug interactions plus drug-drug stacking within the complex. This complex associates with neutral egg lecithin vesicles by means of hydrophobic attraction between the doxorubicin and the vesicle bilayers. In the process, the doxorubicin "destacks", providing a fluorescence change that can be monitored. Finally, the doxorubicin enters the vesicle interior which has been imparted with an acidic pH to protonate the doxorubicin and thus, in a second stage, yield an additional fluorescence change that can also be detected. A portion of the poly(acrylic acid), now devoid of doxorubicin, then leaves the outer vesicle surface and enters to external solution.

Effect of polylysine on transformations and permeability of negative vesicular membranes

Small (40-60 nm in diameter) and large (300-350 nm) negative vesicles were complexed with a cationic polypeptide, poly-L-lysine (PL). Laser microelectrophoresis experiments showed that in small vesicles rendered anionic with the addition of cardiolipin (CL(2-)), only the CL(2-) in the outer leaflet is involved in the complexation with PL. Calorimetric and other data demonstrate that the binding of PL to the membrane surface causes domains ("rafts") of CL(2-) to form in the outer leaflet, and it is these domains that electrostatically bind the polymer. The kinetics of transmembrane permeation of doxorubicin (Dox, a fluorescent anti-tumor drug) was monitored with and without PL binding to the outer surface of the vesicles. It was found that PL mediates the permeation of Dox into the vesicle interior. In the absence of PL, the Dox molecule (possessing an amino group of pK(a)=8.6) binds to the anionic vesicles in the protonated form and, consequently, suffers an impaired mobility through the membrane. On the other hand, when the PL covers the vesicle surface, Dox passes though the membrane with greater ease. The effects of salt and polyanion on the stability of PL-vesicle complexes and the PL-mediated Dox permeation are also discussed.

Poly(L-lysine) as a model drug macromolecule with which to investigate secondary structure and membrane transport, part I: Physicochemical and stability studies

Low oral bioavailability of therapeutic peptides and proteins generally results from their poor permeability through biological membranes and enzymatic degradation in the gastrointestinal tract. Since different secondary structures exhibit different physicochemical properties such as hydrophobicity, size and shape, changing the secondary structure of a therapeutic polypeptide may be another approach to increasing its membrane permeation. Poly(L-lysine) was used as a model polypeptide. The objectives of this study were to induce secondary structural changes in poly(L-lysine) and to determine the time course over which a given conformer was retained. In addition, the hydrophobicity of each secondary structure of poly(L-lysine) was assessed. The circular dichroism (CD) studies demonstrated that the conditions employed could successfully induce the desired secondary structural changes in poly(L-lysine). The alpha-helix conformer appeared to be more stable at 25 degrees C whereas the beta-sheet conformer could be preserved at 37 degrees C. On the other hand, the random coil conformer was retained at both temperatures. Significant losses of the alpha-helix and the beta-sheet conformers were observed when the pH was reduced. The change in ionic strength did not affect any of the conformers. The octanol/buffer partitioning studies indicated that the alpha-helix and the beta-sheet conformers exhibited significantly different (P < 0.05) hydrophobicities. In conclusion, variation of pH and temperature conditions can be used to induce secondary structural changes in poly(L-lysine). These changes are reversible when the stimuli are removed. The alpha-helix and the beta-sheet conformers of poly(L-lysine) are more lipophilic than the native random coil conformer. Thus, poly(L-lysine) may represent an ideal model polypeptide with which to further investigate the effects of secondary structure on membrane diffusion or permeation.

Effect of phospholipid bilayers on solution conformation of branched polymeric polypeptides and peptide-polymer conjugates

This report provides a detailed analysis on the influence of phosholipid bilayers on the conformation of poly[Lys(X(i)-DL-Ala(m))] (XAK, where X = Ser, Orn, Glu, or AcGlu) type branched polypeptides and their peptide conjugates. CD spectra of polycationic (SAK, OAK), amphoteric (EAK), or polyanionic (Ac-EAK) polylysine derivatives were recorded in 0.25M acetate buffer at pH 7.4 as well as in the presence of DPPC or DPPC/PG (95/5, 80/20 mol/mol) liposomes. Based on these data, two groups of polypeptides are described. Group one contains polypeptides with significantly ordered conformation even in buffer solution (SAK, AcEAK), which is essentially not altered by phospholipids. Group two, branched polypeptides (OAK, EAK), with only partially ordered conformation in aqueous solution in the presence of phospholipid bilayers with high PG content, could adopt more (EAK) or less (OAK) ordered alpha-helical structure depending on their charge properties. In addition, we report on the synthesis of two new sets of oligopeptide-branched polypeptide conjugates. Studies with selected conjugates suggest that these compounds are highly ordered in buffer solution almost regardless from the helix-forming ability of the carrier (AK, SAK, EAK) and from the hydrophilic/hydrophobic character of peptides attached (AVKDEL vs FWRGDLVFDFQV). Addition of phospholipid bilayers with different composition essentially had no modifying effect on conformation of conjugates. From this we can conclude that the covalently coupled oligopeptides has a predominant effect of the conformational properties of conjugates.

Interpolyelectrolyte and block ionomer complexes for gene delivery: physico-chemical aspects

Interpolyelectrolyte complexes formed as a result of the polyion coupling reaction between polynucleotide and polycation chains have been used for gene delivery. A general disadvantage of these systems is their reduced solubility. To overcome this problem, cationic copolymers comprised of polycation and poly(ethylene oxide) segments have been developed. These copolymers form block ionomer complexes with DNA that are water soluble even if all electrostatic charges are neutralized. This paper discusses physico-chemical aspects of formation and behavior of interpolyelectrolyte and block ionomer complexes and presents recent results on the use of block ionomer complexes for gene delivery.

Structure and phase behaviour of dimyristoylphosphatidic acid/poly(L-lysine) systems

Differential scanning calorimetry (DSC) and X-ray diffraction studies on (DMPA)/poly(L-lysine) systems are reported. DSC studies revealed that addition of poly(L-lysine) to DMPA bilayers raises the gel to liquid-crystalline phase transition of the systems, and that this effect depends on the molecular weight of the poly(L-lysine). Small-angle X-ray diffraction measurements showed that, in the liquid-crystalline phase, the lamellar spacing of a DMPA/short-poly(L-lysine) (approximately 4000 mol. wt.) system is shorter than that of a DMPA/long-poly(L-lysine) (approximately 22000 mol. wt.). In this connection wide-angle X-ray diffraction measurements indicate that the long-poly(L-lysine) adopts a beta-sheet conformation on the DMPA bilayers in both the gel and the liquid-crystalline phases, but the short-poly(L-lysine) adopts this conformation only on gel phase DMPA bilayers. We found that the spacings of the hydrocarbon chain packing in a DMPA bilayer in the gel phase increases with temperature, while the spacing between neighbouring polypeptide chains in long-poly(L-lysine) in the beta-sheet conformation remains almost constant. These observations indicate that the positively charged lysine residues are structurally independent of the negatively charged head groups of the phospholipid. On the basis of the present results we propose a model to explain the elementary behaviour of extrinsic membrane proteins in biomembranes.