Substrate-induced evolution of lysozymes

Aromatic residues in the catalytic center of chitinase A from Serratia marcescens affect processivity, enzyme activity, and biomass converting efficiency

The processive Serratia marcescens chitinases A (ChiA) and B (ChiB) are thought to degrade chitin in the opposite directions. A recent study of ChiB suggested that processivity is governed by aromatic residues in the +1 and +2 (aglycon) subsites close to the catalytic center. To further investigate the roles of aromatic residues in processivity and to gain insight into the structural basis of directionality, we have mutated Trp(167), Trp(275), and Phe(396) in the -3, +1, and +2 subsites of ChiA, respectively, and characterized the hydrolytic activities of the mutants toward beta-chitin and the soluble chitin-derivative chitosan. Although the W275A and F396A mutants showed only modest reductions in processivity, it was almost abolished by the W167A mutation. Thus, although aglycon subsites seem to steer processivity in ChiB, a glycon (-3) subsite seems to be adapted to do so in ChiA, in line with the notion that the two enzymes have different directionalities. Remarkably, whereas all three single mutants and the W167A/W275A double mutant showed reduced efficiency toward chitin, they showed up to 20-fold higher activities toward chitosan. These results show that the processive mechanism is essential for an efficient conversion of crystalline substrates but comes at a large cost in terms of intrinsic enzyme speed. This needs to be taken into account when devising enzymatic strategies for biomass turnover.

Endo-N-acetyl-beta-D-glucosaminidases and their potential substrates: structure/function relationships

Endo-N-acetyl-beta-D-glucosaminidases (ENGases) have been defined as the enzymes that hydrolyse the glycosidic bond between an N-acetyl-beta-D-glucosamine residue and the adjacent (partner) monosaccharide within an oligosaccharide chain. Three types of enzymes have been distinguished according to this definition: ENGases acting on murein (type I), those acting on chitin (type II) and, finally, those acting on N-glycans (type III). Considering that N-acetylmuramic acid is a derivative of N-acetylglucosamine (3-O-substituted by a lactyl group), only ENGases acting between two N-acetylglucosamine residues are actually known despite the fact that other possibilities of partner monosaccharides for N-acetyl-beta-D-glucosamine are reported. Similarities in the amino acid sequences were found to occur only between chitin-ENGases and N-glycan-ENGases, but the substrate specificities of these two types of enzymes are different. However, it is possible that certain enzymes are able to cleave more than one type of substrate, and this could in particular explain why the N-glycan-ENGases are largely produced by bacteria in which no potential substrate for this type of enzymes was identified. Further study in this area is expected.

Construction of a multifunctional pneumococcal murein hydrolase by module assembly

A chimeric trifunctional pneumococcal peptidoglycan hydrolase (CHL) has been constructed by fusing a choline-binding domain with two catalytic modules that provide lysozyme and amidase activity. The chimeric enzymes behaves as a choline-dependent enzyme and its activity is comparable to that of the parent enzymes. Site-directed mutagenesis of CHL produced a mutated enzyme [D9A,36A]CHL) that only exhibited an amidase activity. Comparative biochemical analyses of CHL and [D9A, E36A]CHL strongly suggest that the lysozyme catalytic module confers 88% of the total activity of CHL, whereas 12% of the activity can be ascribed to the amidase module. Both enzymatic activities are affected by the process of activation or conversion induced by choline suggesting that the conversion process is produced by a conformational change in the choline-binding domain. Our findings demonstrate that the three modules can acquire the proper folding conformation in the-three domain chimeric CHL enzyme. This experimental evidence supports the modular theory of protein evolution, and demonstrates that modular assembly of functional domains can be a rational approach to construct fully active chimeric enzymes with novel biological or biotechnological properties.

Phage lysozymes

Bacteriophage genomes encode lysozymes whose role is to favour the release of virions by lysis of the host cells or to facilitate infection. In this review, the evolutionary relationships between the phage lysozymes are described. They are grouped into several classes: the V-, the G-, the lambda- and the CH-type lysozymes. The results of structure determinations and of enzymological studies indicate that the enzymes belonging to the first two classes, and possibly the third, share common structural elements with C-type lysozymes (eg. hen egg white lysozyme). The proteins of the fourth class, on the other hand, are structurally similar to the S. erythraeus lysozyme. Several phage lysozymes feature a modular construction: besides the catalytic domain, they contain additional domains or repeated motifs presumed to be important for binding to the bacterial walls and for efficient catalysis. The mechanism of action of these enzymes is described and the role of the important amino acid residues is discussed on the basis of sequence comparisons and of mutational studies. The effects of mutations affecting the structure and of multiple mutations are also discussed, particularly in the case of the T4 lysozyme: from these studies, proteins appear to be quite tolerant of potentially disturbing modifications.

Lysozyme substrates

The natural substrate of lysozyme is the rigid layer of bacterial cell walls, the murein (peptidoglycan), which is a gigantic polymer of (GlcNAc-MurNAc)n polysaccharide strands crosslinked through short peptide bridges at the lactyl groups of the muramic acid residues. Thus, lysozyme lyses bacteria by degrading their protective exoskeleton, the murein sacculus. The high molecular weight murein is thereby hydrolysed to low molecular weight muropeptides, a process that can be followed quantitatively by different methods. However, due to the insolubility of the murein sacculus, the enzyme kinetics are rather complex. Therefore, a variety of different low molecular weight substrates have been prepared, both murein degradation products and synthetic compounds. These substrates allow a better characterization of the binding and catalytic mechanism of lysozyme. In addition, they are used in various photometric, isotopic and immunological lysozyme assays.

The catalytic domain of a bacterial lytic transglycosylase defines a novel class of lysozymes

The 70-kDa soluble lytic transglycosylase (SLT70) from Escherichia coli is a bacterial exo-muramidase that cleaves the cell wall peptidoglycan, producing 1,6-anhydro-muropeptides. The X-ray structure of SLT70 showed that one of its domains is structurally related to lysozyme, although there is no obvious similarity in amino acid sequence. To relate discrete structural features to differences in reaction mechanism and substrate/product specificity, we compared the three-dimensional structure of the catalytic domain of SLT70 with the structures of three typical representatives of the lysozyme superfamily: chicken-type hen egg-white lysozyme, goose-type swan egg-white lysozyme, and phage-type lysozyme from bacteriophage T4. We find a particularly close relationship between the catalytic domain of SLT70 and goose-type lysozyme, with not only a significant similarity in overall structure, but even a weak homology in amino acid sequence. This finding supports the notion that the goose-type lysozyme takes up a central position in the lysozyme superfamily and that it is structurally closest to the lysozyme ancestors. The saccharide-binding groove is the most conserved part in the four structures, but only two residues are absolutely preserved: the "catalytic" glutamic acid and a structurally required glycine. The "catalytic" aspartate is absent in SLT70, a difference that can be related to a different mechanism of cleavage of the beta-1,4-glycosidic bond. The unique composition of amino acids at the catalytic site, and the observation of a number of differences in the arrangements of secondary structure elements, define the catalytic domain of SLT70 as a novel class of lysozymes. Its fold is expected to be exemplary for other bacterial and bacteriophage muramidases with lytic transglycosylase activity.

What's new in lysozyme research? Always a model system, today as yesterday

The present review is focused on the main achievements realized in the lysozyme research field since the meeting held in 1972 to commemorate the fiftieth anniversary of the discovery of this enzyme. Despite of extensive structural, physico-chemical, crystallographic, genetic, immunological and evolutionary studies devoted to lysozymes, their biological role is still not exactly known.

Purification and characterization of three separate bacteriolytic enzymes excreted by Staphylococcus aureus, Staphylococcus simulans, and Staphylococcus saprophyticus

As a further development of previous investigations showing that different staphylococcal species display different bacteriolytic activity patterns (lyogroups), the bacteriolytic enzymes excreted by three different Staphylococcus species, Staphylococcus aureus (lyogroup I), S. simulans (lyogroup II), and S. saprophyticus (lyogroup IV); have been purified and characterized. A representative strain from each species was grown in a preselected medium made of fully dialyzable products. Culture supernatants were collected in the appropriate growth phase. Two different affinity adsorbents were used for enzyme purification. One was obtained by coupling lysozyme-digested pure peptidoglycan from Micrococcus luteus to cyanogen bromide-activated Sepharose 4B. The second affinity adsorbent used was chitin. The S. aureus bacteriolytic enzyme bound to the solubilized peptidoglycan but not to chitin, whereas the opposite was true for the S. simulans enzyme. The bacteriolytic enzyme from S. saprophyticus did not bind to either the Sepharose 4B-peptidoglycan resin or to chitin, and its purification was achieved by two ion-exchange chromatography steps combined with gel filtration. All three enzymes were purified to apparent homogeneity. Their subsequent characterization indicated that all acted as endo-beta-N-acetylglucosaminidases. However, the three glucosaminidases differed significantly in their kinetics of activity and bacteriolytic spectrum against heat-killed cells of a variety of microorganisms. Very different values also resulted from molecular weight determinations: 80,000 for the S. aureus enzyme, 45,000 for the S. simulans enzyme, and 31,000 for the S. saprophyticus enzyme. Other important differences were observed in their stability, optimal pH and ionic strength for their activity, and their responses to temperature and divalent cations. These results confirmed the previous proposal that different staphylococcal species excrete different lytic enzymes.

The specificity requirements of bacteriophage T4 lysozyme. Involvement of N-acetamido groups

Bacillus cereus peptidoglycan with N-unsubstituted glucosamine residues was insensitive to treatment with bacteriophage T4 lysozyme. After N-acetylation with acetic anhydride, T4 lysozyme cleared solutions of the peptidoglycan and reducing sugars were liberated. The digestion products were mainly of high molecular weight, since the peptidoglycan is peptide cross-linked to a great extent. N-Propylation did not convert the partially N-unsubstituted peptidoglycan to a sensitive form. It is concluded that the acetamido groups are required for binding and/or catalysis by T4 lysozyme.

Low-molecular-weight substrate for the lysozyme of T4 bacteriophage

It has been shown that muropeptide CB, the chemically defined product of Escherichia coli B murein digestion by phage lambda endolysin, is the substrate for T4 lysozyme. This is the tetrasaccharide GlcNAc-MurNAc-GlcNAc-anMurNAc in which the carboxyl groups of MurNAc and anMurNAc residues are substituted by tetrapeptide LAla-DGlu-msA2pm-DAla (MurNAc = N-acetylmuramic acid, GlcNAc = N-acetyl-D-glucosamine, anMurNAc = 1,6-anhydro-N-acetylmuramic acid, LAla = L-alanine, DGlu = D-glutamic acid, msA2pm = meso-diaminopimelic acid). The substrate contains one bond hydrolysable by T4 lysozyme. The products of hydrolysis are the easily identifiable disaccharide muropeptides C6 (GlcNAc-MurNAc-LAla-DGlu-msA2pm-DAla) and CA (GlcNAc-anMurNac-LAla-DGlu-msA2pm-DAla). Thus the substrate may be used for the specific identification of murein N-acetylmuramoylhydrolases of the T4 lysozyme type, as well as for any quantitative measurement of the enzymatic reaction.