Characterization of a replication mutant of the bacteriocinogenic plasmid Clo DF13

Structure and regulation of gene expression of a Clo DF13 plasmid DNA region involved in plasmid segregation and incompatibility

The bacteriocinogenic plasmid Clo DF13 contains genetic information involved in the accurate partitioning of the plasmid (parA and parB) as well as in incompatibility phenomena (incA, B, C and D). In this paper we report on the primary structure and regulation of gene expression of the 29% - 50% part of Clo DF13, containing the DNA regions incA, incB and parB as well as genes K and L. According to the results of our DNA sequence analysis, mapping of transposon insertions, RNA blotting and S1 mapping experiments, we conclude that: a) genes K and L are transcribed as one operon; transcription of this operon is initiated at a promoter (P2) located at 32.5% and proceeds in a clockwise direction. b) treatment of cells with mitomycin-C, significantly enhances transcription from P2, although this promoter is probably not directly repressed by lexA protein. c) Termination of transcription of this operon occurs between genes K and L, as well as distal to gene L. The possible role of gene products and/or sites, located within the 29-50% DNA region, in plasmid incompatibility and segregation is discussed.

Partial characterization of a small, multiple-copy plasmid from Streptomyces espinosus and the derivation of a high copy-number deletion mutant

An organism classified as Streptomyces espinosus was found to carry an approx. 9.2-kb plasmid. This plasmid, designated pUC6, has a copy number of 30-40 per host genome equivalent. Plasmid pUC1061, a copy-number mutant of pUC6, was isolated after in vitro deletion of an approx. 2.0-kb XhoI restriction fragment. Plasmid pUC1061 has a copy number of 500-600. Plasmid pUC1061 appears to be incompatible with pUC6 and will transform a pUC6-containing culture at a frequency of approx. 1%. The sizes, restriction maps and copy numbers of plasmids pUC6 and pUC1061 indicate these may be valuable vectors for gene cloning Streptomyces.

Protein H encoded by plasmid Clo DF13 involved in lysis of the bacterial host. II. Functions and regulation of synthesis of the gene H product

We studied the expression of gene H, located between 9.3% and 11% on the CLo DF13 genome, as well as the functions of the gene product. We found that treatment of bacterial cells with mitomycin-C results in the induced synthesis of three Clo DF13 specified proteins namely cloacin DF13, immunity protein and protein H. Evidence was obtained that the genes encoding these proteins form one, mitomycin-C induceable, operon; the promoter at 32% in front of the cloacin gene is essential for the induced expression. Furthermore we could demontrate that protein H is involved in the lethal effect of mitomycin-C treatment of bacteriocinogenic cells. The data in this paper show that a high concentration of protein H in cells, due either to an induced expression of gene H (mitomycin-C induction) or to a gene dosage effect (Clo DF13 copl Ts copy control mutant), results in the lysis of bacterial cells. The implication of these data are discussed.

Mitomycin C-induced synthesis of cloacin DF13 and lethality in cloacinogenic Escherichia coli cells

Treatment of cloacinogenic cultures with increasing concentrations of mitomycin C induced an increasing synthesis of cloacin DF13 accompanied by a decreasing number of colony-forming cells. Cells grown in the presence of glucose required a 10-fold-higher concentration of mitomycin C for optimal induction of cloacin production than did cells grown with lactate. Release of the cloacin was hampered in glucose-grown cells. Experiments with various CloDF13 insertion and deletion mutants revealed that the transcription of CloDF13 deoxyribonucleic acid sequences adjacent to the cloacin structural gene was essential for mitomycin C-induced lethality.

Transcription of bacteriocinogenic plasmid CloDF13 in vivo and in vitro: structure of the cloacin immunity operon

Escherichia coli minicells harboring plasmid CloDF13 synthesized at least 25 messenger ribonucleic acid (RNA) species; three of these RNAs, a 2,400-, a 2,200-, and a 100-nucleotide RNA, were synthesized in relatively large amounts. Using insertion and deletion mutants of CloDF13 as well as an RNA blotting technique, we could demonstrate that these three RNAs are transcripts from the CloDF13 DNA region from 0 to 40%. This region contains the cloacin and immunity genes and the genetic information involved in plasmid DNA replication. A transcription map of this region is presented and discussed. The data indicate that the cloacin and immunity genes were coordinately transcribed into messenger RNAs of about 2,400 and 2,200 nucleotides, which differ in length at their 3' terminus. RNA polymerase binding studies and in vitro transcription assays indicated that transcription of these genes initiates at a promoter located around 32% on the CloDF13 map. Furthermore, it is shown that a 100-nucleotide RNA is encoded by the CloDF13 DNA region between 7.7 and 8.8% on the plasmid genome; the synthesis of this RNA proceeds in a direction opposite to the transcription of the cloacin and immunity genes.

Molecular structure of the immunity gene and immunity protein of the bacteriocinogenic plasmid Clo DF13

The nucleotide sequence of the Clo DF13 DNA region comprising the immunity gene has been determined. We also elucidated the aminoacid sequence of the 40 N-terminal and 7 C-terminal aminoacids of the purified immunity protein. From analysis of the data obtained we were able to locate the immunity gene between 11.7 and 14.5% on the Clo DF13 map, and to determine the complete aminoacid sequence of the immunity protein. It was observed that the Clo DF13 immunity gene encodes an 85 aminoacid protein and is transcribed in the same direction as the cloacin gene. These experimental data support our model, presented elsewhere, which implicates that the cloacin and immunity genes of Clo DF13 are coordinately transcribed from the cloacin promoter. We also present DNA sequence data indicating that an extra ribosome binding site precedes the immunity gene on the polycistronic mRNA. This ribosome binding site might explain the fact that in cloacinogenic cells more immunity protein than cloacin is synthesized. The comparison of the complete aminoacid sequence of the Clo DF13 immunity protein, with the aminoacid sequence data of the purified, comparable Col E3 immunity protein revealed that both proteins have extensive homologies in primary and secondary structure, although they are exchangeable only to a low extent in vivo and in vitro. It was also observed that a lysine residue was modified in immunity protein isolated from excreted bacteriocin complexes.

Genetic information of the bacteriocinogenic plasmid Clo DF13 involved in the inhibition of the multiplication of double stranded DNA phages

The presence of plasmid Clo DF13 in Escherichia coli cells alters the response of these cells to infection with the double stranded DNA phages P1vir, lambda vir or T1. The multiplication of these phages is reduced in Clo DF13 harbouring cells, resulting in an altered burstsize and plaque morphology. The degree of reduction is correlated to the amount of particular Clo DF13 gene product(s) in the cell. The genetic information of Clo DF13 involved in this plasmid-phage interaction could be located, using insertion and deletion mutants of Clo DF13, between 29 an 62% on the Clo DF13 physical map. The genetic analysis of this region shows that at least two different genes, K and L, coding for polypeptides with a molecular weight of respectively 21 KD and 10.5 KD, are located in this region. The results presented, indicate that gene L and not gene K is involved in the interaction of Clo DF13 with the propagation of double stranded DNA phages.

Isolation and characterization of a Clo DF13::Tn901 plasmid mutant with thermosensitive control of DNA replication

After nitrosoguanidine mutagenesis, a mutant Escherichia coli strain harboring the Clo DF13::Tn901 plasmid pJN03 was isolated that is thermosensitive (Ts) for growth at 43 degrees C. The mutation responsible for this thermosensitive phenotype resides on the pJN03 plasmid genome. Cells harboring the pJN03 cop-1(Ts) plasmid mutant showed a large increase in plasmid copy number at 43 degrees C accompanied by an increase in the synthesis of plasmid-specified gene products like cloacin DF13 and beta-lactamase. The pJN03 cop-1(Ts) mutant showed uncontrolled plasmid DNA replication at the nonpermissive temperature. Analysis of plasmid deletions showed that the mutation is located in the Clo DF13 map interval from 0 to 12% or 29 to 45%. This implies that native cloacin DF13 and the Clo DF13-specified polypeptides B, C, D, E, and G are not involved in the pleiotropic phenotype of the plasmid mutant pJN03 cop-1(Ts).