Photoluminescence methods for evaluation of solubilization parameters and dynamics or micellar aggregates. Limiting cases which allow estimation of partition coefficients, aggregation numbers, entrance and exit rates

Synthesis, Structural Properties and Applications of Gemini Surfactants: A Review

Gemini surfactants are most exciting new types of surfactants. They have two hydrophilic head groups and two hydrophobic groups in a molecule separated by a spacer group. Nowadays different types of geminis have been synthesized. Geminis show some characteristic features like low cmc, high surface activity, high solubility in water, good foaming and wetting properties, as well as low Krafft temperature. Geminis imply low eye and skin irritation. These surfactants are widely used as antifoaming and antimicrobial agents. This review paper deals with synthesis, properties and applications of various gemini surfactants.

New insights in the study of pyrene excimer fluorescence to characterize macromolecules and their supramolecular assemblies in solution

This report highlights some of the recent developments that have been made in the quantitative analysis of fluorescence decays acquired with pyrene-labeled macromolecules. With these new analytical tools, macromolecules of different composition and architecture can now be labeled in a variety of ways with the pyrene chromophore, and the kinetics of pyrene excimer formation can be described to retrieve quantitative information about the internal dynamics of the macromolecules studied. In particular, this review presents the procedure that was followed to develop these new analytical tools and how the process of pyrene excimer formation with vinyl polymers, poly(L-glutamic acid), dendrimers, associative polymers, surfactants, and lipids labeled with pyrene has been successfully characterized thanks to these analysis programs.

Fluorescence study of drug-carrier interactions in CTAB/PBS buffer model systems

The well-known cationic surfactant hexadecyltrimethylammonium bromide (CTAB) was used as a model carrier to study drug-carrier interactions with fluorescence probes (5-hexadecanoylaminofluorescein (HAF) and 2,10-bis-(3-aminopropyloxy)dibenzo[a,j]perylene-8,16-dione (NIR 628) by applying ensemble as well as single molecule fluorescence techniques. The impact of the probes on the micelle parameters (critical micelle concentration, average aggregation number, hydrodynamic radius) was investigated under physiological conditions. In the presence of additional electrolytes, such as buffer, the critical micelle concentration decreased by a factor of about 10. In contrast, no influence of the probes on the critical micelle concentration and on average aggregation number was observed. The results show that HAF does not affect the characteristics of CTAB micelles. Analyzing fluorescence correlation spectroscopy data and time-resolved anisotropy decays in terms of the "two-step" in combination with the "wobbling-in-cone" model, it was proven that HAF and NIR 628 are differently associated with the micelles. Based on ensemble and single molecule fluorescence experiments, intra- and intermicellar energy transfer process between the two dyes were probed and characterized.

Spectral and electrochemical studies of bis(diimine)copper(II) complexes in anionic, cationic and nonionic micelles

The spectral and redox behavior of bis(diimine)copper(II) complexes, where diimine is bipyridine, 1,10-phenanthroline, 4-methyl-1,10-phenanthroline, 5-methyl-1,10-phenanthroline, 5-nitro-1,10-phenanthroline, 4,7-dimethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline and dipyrido-[3,2-d:2',3'-f]-quinoxaline, are significantly different in aqueous and in aqueous SDS, CTAB and Triton X-100 micellar solutions. The (1)H NMR spectral study in aqueous (D(2)O) and aqueous micelles reveals that the Cu(II) complexes interact more strongly with SDS than with CTAB and Triton X-100 micelles and at sites on SDS micelles different from those on the latter. Ligand Field spectral studies reveal that the complexes exist as the dicationic aquated species [Cu(diimine)(2)(H(2)O)(2)](2+), which interacts strongly with the anionic SDS micelles through columbic forces. However, they exist as [Cu(diimine)(2)(H(2)O)Cl](+) and/or [Cu(diimine)(2)H(2)] located in the hydrophobic microenvironments in Triton X-100 and CTAB micelles. The attainment of reversibility of the redox systems in the micellar microenvironments is remarkable and this illustrates that the Cu(II) and Cu(I) species undergo stereochemical changes suitable for reversible electron-transfer. The remarkable differences in spectral and electrochemical properties of Cu(II) complexes in aqueous and aqueous micellar solutions illustrate that the complexes are nestled largely within the micellar environments and imply that the accessibilities of the complexes to electron-transfer are different and are dependent on the nature of micelles as well as the nature and hydrophobicity of the diimine ligands.

Compartmental analysis in photophysics: Kinetics and identifiability of models for quenching of fluorescent probes in micelles

The parameters describing the kinetics of excited-state processes can possibly be recovered by analysis of the fluorescence decay surface measured as a function of the experimental variables. The identifiability analysis of a photophysical model assuming errorless time-resolved fluorescence data can verify whether the model parameters can be determined. In this work, we have used the methods of similarity transformation and Taylor series to investigate the identifiability of two models utilized to describe the time-resolved fluorescence quenching of stationary probes in micelles. The first model assumes that exchange of the quencher between micelles is much slower than the fluorescence decay of the unquenched probe (the 'immobile' quencher model). The second model assumes that quenchers exchange between the aqueous and micellar phases (the 'mobile' quencher model). For the 'immobile' quencher model, the rate constants for deactivation (k(0)) and quenching (k(q)) of the excited probe are uniquely identified together with the average number of quencher molecules per micelle. For the 'mobile' quencher model, the rate constants k(0) and k(q) are uniquely identified, as are the rate constants for entry (k(+)) and exit (k(-)) of one quencher molecule into and from a micelle, and the micellar aggregation number. The concomitant rate equations describing the time-resolved fluorescence are solved using z-transforms.

Cholesterol Mesogen Containing Water-Soluble Copolymers: Design and Organization Behavior at Different Interfaces

Cholesterol mesogen containing monomer, cholesteryl acrylamido butyrate (CAB) with the novel spacer group drawn from 4-amino butyric acid has been demonstrated to exhibit good reactivity with 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) to yield copolymers with CAB content as high as 15 mol % hitherto not achieved. The spacer group is shown to provide the twin benefits of enhanced reactivity and solubility in water. The high pK(a) at > or =9.90 of these copolymers estimated from potentiometric studies demonstrates packing of AMPS segments as ionic clusters. The higher CAB in copolymer C provides the most densely packed nonpolar microdomains. From fluorescence quenching studies, the cross-linking provided by the cholesterol chains favoring intra- or intermolecular aggregated structures has been established. At the air/solution interface, copolymer C exhibits the most close-packed structures exhibiting "a" of 41.2 A(2)/molecule. The effect of neutralization on the adsorption characteristics is investigated.

Aggregation numbers of cationic oligomeric surfactants: a time-resolved fluorescence quenching study

The micelle aggregation numbers (N(agg)) of several series of cationic oligomeric surfactants were determined by time-resolved fluorescence quenching (TRFQ) experiments, using advantageously 9,10-dimethylanthracene as fluorophore. The study comprises six dimeric ("gemini"), three trimeric, and two tetrameric surfactants, which are quaternary ammonium chlorides, with medium length spacer groups (C(3)-C(6)) separating the individual surfactant fragments. Two standard cationic surfactants served as references. The number of hydrophobic chains making up a micellar core is relatively low for the oligomeric surfactants, the spacer length playing an important role. For the dimers, the number decreases from 32 to 21 with increasing spacer length. These numbers decrease further with increasing degree of oligomerization down to values of about 15. As for many conventional ionic surfactants, the micelles of all oligomers studied grow only slightly with the concentration, and they remain in the regime of small micelles up to concentrations of at least 3 wt %.

Distribution of amines in water/AOT/n-hexane reverse micelles: influence of the amine chemical structure

The distribution of different aliphatic and aromatic amines: n-butylamine (n-BA), isobutylamine (i-BA), tert-butylamine (t-BA), piperidine (PIP), N,N-dimethylaniline (DMA) and N-methylaniline (MA) in water/sodium 1,4-bis(2-ethylhexyl)sulfosuccinate(AOT)/n-hexane reverse micelles was investigated by steady-state fluorescence measurements. The partition constants were measured by an indirect method based on the effect that amine partitioning exert on the bimolecular rate of the reaction between a microphase incorporated fluorophore (Ru(bpy)2+(3)) and the quencher, (Fe(CN)3-(6)). For MA, that can act as a quencher of the fluorophore a direct method was used. The results show that primary amines have larger partition constants than the secondary ones. For tertiary amines the distribution constants were practically negligible. Laser flash photolysis experiments confirmed that tertiary amines, both aliphatic and aromatic, are not incorporated to the micellar pseudophase. The effect of the amine structure on the partition constant was analyzed through linear solvation free energy relationships (LSER) using solute parameters and compared with those obtained for alcohols. Hydrogen bond interactions with the AOT polar heads appear to be the main driving force for the distribution of amines between the organic and micellar pseudophases, whereas the size of the alkyl or aromatic group tends to hinder it.

Fluorescence resonance energy transfer—a spectroscopic probe for organized surfactant media

Dyes commonly used as biological labels have been used to probe resonance energy transfer in organized media. In neat water, energy transfer between the dye pairs fluorescein (donor):Nile red (acceptor) and acridine orange (donor):Nile red (acceptor) has a very low probability of occurrence. This study shows that the rate constant of energy transfer increases by more than an order of magnitude in organized surfactant media, viz., micelles and reverse micelles of the surfactant Triton X-100. The reverse micelles provide a better medium for energy transfer than the micelles. The energy transfer studies also provide an idea about the location and proximity of donor and acceptor dyes within the various organized media. Assuming Poissonian statistics for dye distribution, the donor-acceptor distances within micelles and reverse micelles are determined from energy transfer parameters. Acridine orange has been found to function better as a donor than fluorescein. This may be due to steric and electrostatic factors.

Using micelles for a new approach to fluorescent sensors for metal cations

A new approach based on self-assembly inside micelles has been individuated to prepare a system behaving as a water-operating selective fluorescent sensor for Cu2+ and Ni2+.

Fate of excited probes in micellar systems

This article presents studies on the photophysical and photochemical behavior of probes within micellar systems: organized emulsifier/polymer aggregates; the intra- and interpolymer association of amphiphilic polymers; monomer-swollen micelles (microdroplets); and the interfacial layer. Pyrene (Py) as a probe is particularly attractive because of its ability to measure the polarity of its microenvironment. Dipyme yields information on the microviscosity of micellar systems. Probes such as laurdan and prodan can be used to explore the surface characteristics of micelles or microdroplets. The dansyl group has a special photophysical property that gives information about the local polarity and mobility (viscosity) of the microenvironment. The organized association of amphiphilic polymer and emulsifier introduces a heterogeneity in the local concentration of the reactants. This heterogeneity also results from the attractive interaction between hydrophilic monomer and emulsifier in the case when the monomer carries a positive charge and the counterpart a negative one, and vice versa. Some emulsifiers can bind to the amphiphilic copolymers by simple partitioning between the aqueous phase and the polymer--non-cooperative association. The interaction between micelles (microdroplets) and charged polymers leads to the formation of mixed micelles. Binding emulsifiers to these polymers was detected at emulsifier concentrations much below the critical micellar concentration (CMC). Emulsifiers often interact cooperatively with polymers at the critical aggregation concentration (CAC) below the CMC, forming micelle-like aggregates within the polymer. The CAC can be taken as a measure of interaction between the emulsifier and polymer. A decrease in the monomer fluorescence intensity of probe-labeled polymer results from increased excimer formation, or higher aggregates within the unimolecular polymeric micelles. An increase in the monomer fluorescence intensity of probe-labeled polymer within the micellar system can be ascribed to shielding of the probe chromophores by emulsifier micelles. The quenching of probe emission by (un)charged hydrophilic monomer depends on partitioning of the monomer between the aqueous phase and the micelles. Penetration of reactants into the interfacial layer determines the quenching of the hydrophobic probe by hydrophilic quencher, or vice versa. Quenching depends on the thickness, density and charge of the interfacial layer. Compartmentalization prevents the carbonyl compound and unsaturated monomer from coming into sufficiently close contact to allow singlet or triplet-monomer interaction. All negatively charged carbonyl probe molecules are quenched with significantly lower rates than the parent neutral hydrophobic benzophenone molecules, which were located further inside the aggregates. This results from the different conformation and allocation of reactants within the micellar system. In the reverse micelles, quenching depends on the amount of water in the interfacial layer and the total area of the water/oil interface.

Substituent Effects on Binding Constants of Carotenoids to n-Heptane/AOT Reverse Micelles

The absorption spectra of 6'-apo-beta-caroten-6'-ol (1), 6'-apo-beta-caroten-6'-oic acid (2), and ethyl 6'-apo-beta-caroten-6'-oate (3) were analyzed in homogeneous media and in reversed micelles of AOT (sodium 1,4-bis(2-ethylhexyl) sulfosuccinate) in n-heptane. The possible solute-solvent interactions of these compounds were analyzed in pure solvents by Taft and Kamlet's solvatochromic comparison method. These carotenoids show sensitivity similar to that of medium polarity-polarizability as measured by pi*. Moreover, the absorption spectra of carotenoid 3 and to much less extent carotenoid 2 display broadening of the visible bands induced by polar solvents characteristic of carotenoids that contain a carbonyl functional group in conjugation with the carbon-carbon pi-electron system. They are also sensitive to the ability of the solvent to accept protons in a hydrogen bond interaction measured by beta. This sensitivity follows the expected order: 2>1>3. In the reverse micellar system, while the spectra for 3 remain unchanged, the intensity of the absorption band characteristic of n-heptane for 1 and 2 decreases as the AOT concentration increases, and a new band develops. This new band is attributed to the solute bound to the micelle interface. These changes allowed us to determine the binding constant (K(b)) between these compounds and AOT. At W(0)=[H(2)O]/[AOT]=0 the values of K(b) of 326+/-5 and 6.2+/-0.3 were found for the acid 2 and the alcohol 1, respectively. The strength of binding is interpreted considering their hydrogen-bond donor ability and the solubility in the organic pseudophase. For 1 K(b) decreases as W(0) is increased, while for 2 no variation was observed. These effects are discussed in terms of carotenoid-water competition for interfacial binding sites. Copyright 2001 Academic Press.

Aggregation Behavior of Nonionic Surfactants Synperonic A7 and A50 in Aqueous Solution

The aggregation behavior of Synperonic A7 and A50, fatty alcohol ethoxylate nonionic surfactants (C(m)E(n)) with mean polyoxyethylene chain lengths of 7 and 50, respectively, was investigated in aqueous solution by means of surface tension, laser light scattering, steady-state fluorescence, and fluorescence quenching experiments. Surface tension measurements at room temperature indicate that the critical micelle concentration of A7 is 0.1 g/L (0.22 mM) and that of A50 is 0.17 g/L (0.07 mM). Static light scattering measurements reveal that the averaged aggregation number of A7 in water is 417 and that of A50 is 23. When solutions of A7 were allowed to age over a period of months at room temperature, the micelle M(w) and hydrodynamic radius increased. The aggregation numbers found from fluorescence quenching measurements, using excimer formation from 1-ethylpyrene as a probe, were about 300 for freshly prepared solutions of A7 and about 40 for A50. We also found that the presence of air has a strong effect on the data obtained from the fluorescence quenching measurements. Copyright 2001 Academic Press.