Detecting ventricular fibrillation using efficient techniques for computing a normalized autocorrelation

Normalized Spatial Autocorrelation in Ultrasound B-Mode Imaging for Point-Scatterer Detection

OBJECTIVE

Point-scatterer detection plays a key role in medical ultrasound B-mode imaging. Speckle noise and insufficient spatial resolution are important factors affecting point-scatterer detection. To address this issue, normalized spatial autocorrelation in ultrasound B-mode imaging (NSACB) is proposed.

METHODS

First, the acquired data are pre-processed by adding Gaussian white noise (GWN) with a certain signal-to-Gaussian white noise ratio (SGWNR). Next, normalized spatial autocorrelation is applied to the pre-processed data, and the data are divided into several new signals with different spatial lags. Then, the new signals are performed unsigned delay multiply and sum. Finally, the NSACB beamformed data are bandpass filtered by extracting the frequency component around twice the center frequency. Simulated and in vitro experiments were designed for validation.

RESULTS

Simulations revealed that the lateral resolution of NSACB measured by the -6-dB mainlobe width can reach as high as 11.11% of delay and sum (DAS), 25.01% of filtered delay multiply and sum (F-DMAS) and 50% of LAG-FDMAS-SCF. The sidelobe level of the NSACB can be reduced at most by 28 dB. Experimental results of simple and complex scatterer phantoms indicate the image resolution of the proposed NSACB can even reach up to 18.76% of DAS, 27.28% of F-DMAS and 14.29% of LAG-FDMAS-SCF. Compared with these methods, the proposed NSACB can reduce the sidelobe level at least by 18 dB.

CONCLUSION

Although the proposed method causes loss of the ability to observe hypo-echoic structures, these results suggest future work to determine the ability to detect breast microcalcifications, kidney stones, biopsy needle tracking and other scenarios requiring scatterer detection.

Robust artefact detection in long-term ECG recordings based on autocorrelation function similarity and percentile analysis

Artefacts can pose a big problem in the analysis of electrocardiogram (ECG) signals. Even though methods exist to reduce the influence of these contaminants, they are not always robust. In this work a new algorithm based on easy-to-implement tools such as autocorrelation functions, graph theory and percentile analysis is proposed. This new methodology successfully detects corrupted segments in the signal, and it can be applied to real-life problems such as for example to sleep apnea classification.

Comprehensive scheme for detection of ventricular fibrillation for implantable cardioverter defibrillators

Implantable cardioverter defibrillators (ICDs) detect and defibrillate ventricular fibrillation (VF) and ventricular tachycardia (VT). Other therapies which use less energy are also available to terminate VT. Previous studies have shown that ICD rate schemes often misdiagnose VT as VF. In this study, an improved VF classification scheme was designed and tested, which employs the classic rate criteria plus paired signal concordance (PSC); PSC uniquely detects VF where VT and VF rates overlap (220-340 ms). Two signals from a bipolar pair (1 cm) recorded in a unipolar sense exhibit similar signal shape for concordant rhythms, such as sinus rhythm and VT, and disconcordance for VF. Once the rate criterion is met, PSC is measured by the peak normalized cross-correlation coefficient calculated over the depolarization. Variability, measured by a modified range, determined the contextual diagnosis over a passage. Sinus rhythm (20), VT (12), VF (22), atrial fibrillation (10), sinus rhythm with ventricular premature depolarizations (7), and polymorphic VT (4) passages were recorded from 38 patients. Rate-PSC was tested with unfiltered, digitized signals (1-500 Hz, 1,000 samples per second) and with filtered, downsampled signals (1-50 Hz, 100 samples per second). Sensitivity values, or percentage of correct VF detection, and specificity values, or detection of all other rhythms, were generated and compared with simulations of three commercial ICDs programmed to similar settings as rate-PSC and to nominal settings. The sensitivity values for rate-PSC with unfiltered and with filtered signals and for ICDs with 220 ms and with nominal settings were 100%, 100%, 48-80%, and 100%, respectively; the corresponding specificity values were 95%, 83%, 93%, and 7-13%, respectively. It was concluded that the rate-PSC scheme was able to reliably separate VF from other rhythms, even rhythms that have a variable morphology or variable rate. With the confidence of accurate VF detection, use of low-energy therapies for non-VF rhythms will increase device longevity and enhance patient comfort.

A comparison of similarity measures for digital subtraction radiography

Subtraction is useful in detecting small changes in sequentially acquired radiographs. Even if the imaging geometry is constant, radiographs must be registered after their digitization. To compare different algorithms for image registration and to register digital X-rays themselves, various similarity measures have been proposed. This study compares eight mathematical similarity standards using 172 radiographs acquired in different, but exactly known projection. Whenever the computation time is a critical factor, e.g. registering images using methods similar to correlation techniques, the entropy of the subtraction image's histogram function (EHDI) is found to be the best similarity standard. If not, e.g. comparative assessing different image registration techniques, the cross covariance coefficient (CCC) is appropriate.