Reactivities of carbonyl sulfide (COS), carbon disulfide (CS2) and carbon dioxide(CO2)with transition metal complexes

Palladium-anchored calix[4]arene-derived porous organic polymer towards efficient hydrolytic cleavage of carbon disulfide

The release of carbon disulfide can have adverse effects on our environment and human health. The stability of carbon disulfide and the slow kinetics of hydrolysis can make it challenging to achieve efficient and practical cleavage of the CS bonds. Herein, a calix[4]arene-based porous organic polymer (CPOP-1) is innovatively synthesized through an optimized polycondensation reaction using C-Methylcalix[4]resorcinarene and hexafluoro-hexaazatriphenylene as monomers. Subsequently, palladium-induced calix[4]arene-based porous organic polymer was also synthesized via strong Pd-N coordination bonds to construct the metal-induced porous catalyst (CPOP-2). The polymeric catalyst active center [Pd2+(N^N)(NO3-)2] demonstrated outstanding catalytic hydrolysis performance (11.14 μmol g-1 h-1) in 10.5 h which is significantly enhanced by ca.13.2 times as compared to reported mononuclear Bpy-Pd(NO3)2, and 7.07 times than model trinuclear complex catalyst HATN-Pd-1, respectively. The control experiments revealed that POP catalysts showcased robust stability, prolonged effectiveness, and feasible recyclability during the hydrolytic cleavage of carbon disulfide at room temperature in aqueous solutions. Furthermore, the coordination environment of [Pd2+(N^N)] was validated through XPS, EXAFS, and isotope labeling measurements, and the hydrolysis cleavage products were confirmed e. g. CO2, sulfide, and protons. More importantly, a reaction mechanism was formulated coupled with theoretical calculations, and simulations. The proposed mechanism involves sequential OH- nucleophilic attacks on the carbon atoms of insert-coordinated CS2 and COS, leading to the cleavage of double CS bonds and the formation of CO bonds. The concurrent dissociation of the C-S bond and liberation of CO2 result in an intermediate structure characterized by [(N^N)Pd2+](SH-)2. This intermediate motif serves as the source of the thermodynamic driving force for the reaction.

Bimetallic Perthiocarbonate Complexes of Cobalt: Synthesis, Structure and Bonding

The syntheses and structural elucidation of bimetallic thiolate complexes of early and late transition metals are described. Thermolysis of the bimetallic hydridoborate species [{Cp*CoPh}{µ-TePh}{µ-TeBH3-ĸ2Te,H}{Cp*Co}] (Cp* = ɳ5-C5Me5) (1) in the presence of CS2 afforded the bimetallic perthiocarbonate complex [(Cp*Co)2(μ-CS4-κ1S:κ2S')(μ-S2-κ2S″:κ1S‴)] (2) and the dithiolene complex [(Cp*Co)(μ-C3S5-κ1S,S'] (3). Complex 2 contains a four-membered metallaheterocycle (Co2S2) comprising a perthiocarbonate [CS4]2- unit and a disulfide [S2]2- unit, attached opposite to each other. Complex 2 was characterized by employing different multinuclear NMR, infrared spectroscopy, mass spectrometry, and single-crystal X-ray diffraction studies. Preliminary studies show that [Cp*VCl2]3 (4) with an intermediate generated from CS2 and [LiBH4·THF] yielded thiolate species, albeit different from the cobalt system. Furthermore, a computational analysis was performed to provide insight into the bonding of this bimetallic perthiocarbonate complex.

Ligand-Dominated Activation of CO2 and CS2 by the Putative Nickel Phosphiniminato Intermediates

Room-temperature photoactivation of the first- and second-generation PN3P-pincer nickel azido complexes 1a and 1b in the presence of CO2 or CS2 afforded N-bound carbamates, dithiocarbamates, and isothiocyanates, providing insights into CO2 and CS2 activation and demonstrating how a seemingly small difference in the ligand structure significantly influences the reactivity. Theoretical calculations disclosed that the charge of the phosphorus atom plays a critical role in determining the nitrogen atom transfer to form a plausible nickel phosphiniminato intermediate.

Metal-Tuned Ligand Reactivity Enables CX2 (X = O, S) Homocoupling with Spectator Cu Centers

Ligand non-innocence is ubiquitous in catalysis with ligands in synthetic complexes contributing as electron reservoirs or co-sites for substrate activation. The latter chemical non-innocence is manifested in H+ storage or relay at sites beyond the metal primary coordination sphere. Reaction of a competent CO2-to-oxalate reduction catalyst, namely, [K(THF)3](Cu3SL), where L3- is a tris(β-diketiminate) cyclophane, with CS2 affords tetrathiooxalate at long reaction times or at high CS2 concentrations, where otherwise an equilibrium is established between the starting species and a complex-CS2 adduct in which the CS2 is bound to the C atom on the ligand backbone. X-ray diffraction analysis of this adduct reveals no apparent metal participation, suggesting an entirely ligand-based reaction controlled by the charge state of the cluster. Thermodynamic parameters for the formation of the aforementioned Cligand-CS2 bond were experimentally determined, and trends with cation Lewis acidity were studied, where more acidic cations shift the equilibrium toward the adduct. Relevance of such an adduct in the reduction of CO2 to oxalate by this complex is supported by DFT studies, similar effects of countercation Lewis acidity on product formation, and the homocoupled heterocumulene product speciation as determined by isotopic labeling studies. Taken together, this system extends chemical non-innocence beyond H+ to effect catalytic transformations involving C-C bond formation and represents the rarest example of metal-ligand cooperativity, that is, spectator metal ion(s) and the ligand as the reaction center.

Probing the binding and activation of small molecules by gas-phase transition metal clusters via IR spectroscopy

Isolated transition metal clusters have been established as useful models for extended metal surfaces or deposited metal particles, to improve the understanding of their surface chemistry and of catalytic reactions. For this objective, an important milestone has been the development of experimental methods for the size-specific structural characterization of clusters and cluster complexes in the gas phase. This review focusses on the characterization of molecular ligands, their binding and activation by small transition metal clusters, using cluster-size specific infrared action spectroscopy. A comprehensive overview and a critical discussion of the experimental data available to date is provided, reaching from the initial results obtained using line-tuneable CO₂ lasers to present-day studies applying infrared free electron lasers as well as other intense and broadly tuneable IR laser sources.

Toward a Comprehensive Understanding of Amorphous Photocatalysts: Fundamental Hypotheses and Applications in CO2 Photoreduction

In principle, photocatalytic activity can be precisely controlled with crystalline catalysts. However, an amorphous photocatalyst could be a viable candidate for CO₂ photoreduction to form value-added products. The amorphous phase is currently part of the crystalline material in several ongoing CO₂ photoreduction studies. Additionally, no study indicates the amorphous material required for overall CO₂ photoreduction. This perspective review article highlights fundamental assumptions that are necessary to gain insights and understand the effectiveness of amorphous photocatalysts for CO₂ photoreduction. We start with basic ideas and theories about these materials, including light harvesting, variable coordination number, and the interaction of CO₂ molecules with the amorphous catalytic surface. To understand the prospects of the amorphous photocatalyst, we explore machine learning with EXAFS. Furthermore, we discuss product selectivity and regeneration of photocatalysts in detail. Finally, we briefly review the work in progress on amorphous materials and compare it to that on crystalline ones.

Methyl Effects on the Stereochemistry and Reactivity of PPP-Ligated Iron Hydride Complexes

Iron dihydride complexes are key intermediates in many iron-catalyzed reactions. Previous efforts to study molecules of this type have led to the discovery of a remarkably stable cis-FeH₂ complex, which is supported by bis[2-(diisopropylphosphino)phenyl]phosphine (^iPrPP^HP) along with CO. In this work, the hydrogen on the central phosphorus has been replaced with a methyl group, and the corresponding iron carbonyl dichloride, hydrido chloride, and dihydride complexes have been synthesized. The addition of the methyl group favors the anti configuration for the Me-P-Fe-H moiety and the trans geometry for the H-Fe-CO motif, which is distinctively different from the ^iPrPP^HP system. Furthermore, it increases the thermal stability of the dihydride complex, cis-(^iPrPP^MeP)Fe(CO)H₂ (^iPrPP^MeP = bis[2-(diisopropylphosphino)phenyl]methylphosphine). The variations in stereochemistry and compound stability contribute greatly to the differences between the two PPP systems in reactions with PhCHO, CS₂, and HCO₂H.

Activation of CS2 with the 2H-Phosphindole Complex to Construct P,S-Polycycles

The activation of CS₂ by the 2H-phosphindole complex with a low-coordinate phosphadiene moiety is reported. The successive hetero-Diels-Alder reaction between 2H-phosphindoles and CS₂ constructs two bridged rings and one spirocycle simultaneously, affording structurally complex P,S-polycyclic products. The two 2H-phosphindoles approach the C═S bond in a head-to-head disposition to minimize steric hindrance. This work reveals the unique reactivity of low-coordinate organophosphorus species and their potential applications in small molecule activation.

ORGANOMETALLIC GAS-PHASE ION CHEMISTRY AND CATALYSIS: INSIGHTS INTO THE USE OF METAL CATALYSTS TO PROMOTE SELECTIVITY IN THE REACTIONS OF CARBOXYLIC ACIDS AND THEIR DERIVATIVES

Carboxylic acids are valuable organic substrates as they are widely available, easy to handle, and exhibit structural and functional variety. While they are used in many standard synthetic protocols, over the past two decades numerous studies have explored new modes of metal-mediated reactivity of carboxylic acids and their derivatives. Mass spectrometry-based studies can provide fundamental mechanistic insights into these new modes of reactivity. Here gas-phase models for the following catalytic transformations of carboxylic acids and their derivatives are reviewed: protodecarboxylation; dehydration; decarbonylation; reaction as coordinated bases in C-H bond activation; remote functionalization and decarboxylative C-C bond coupling. In each case the catalytic problem is defined, insights from gas-phase studies are highlighted, comparisons with condensed-phase systems are made and perspectives are reached. Finally, the potential role for mechanistic studies that integrate both gas- and condensed-phase studies is highlighted by recent studies on the discovery of new catalysts for the selective decomposition of formic acid and the invention of the new extrusion-insertion class of reactions for the synthesis of amides, thioamides, and amidines. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

Direct sulfidation using a high concentration of H₂S (HC-H₂S) has shown potential for heavy metals removal in various acidic effluents. However, the lack of a smooth method for producing HC-H₂S is a critical challenge. Herein, a novel short-process hydrolysis method was developed for the on-site production of HC-H₂S. Near-perfect 100% efficiency and selectivity were obtained via CS₂ hydrolysis over the ZrO₂-based catalyst. Meanwhile, no apparent residual sulfur/sulfate poisoning was detected, which guaranteed long-term operation. The coexistence of CO₂ in the products had a negligible effect on the complete hydrolysis of CS₂. H₂S production followed a sequential hydrolysis pathway, with the reactions for CS₂ adsorption and dissociation being the rate-determining steps. The energy balance indicated that HC-H₂S production was a mildly exothermic reaction, and the heat energy could be maintained at self-balance with approximately 80% heat recovery. The batch sulfidation efficiencies for As(III), Hg(II), Pb(II), and Cd(II) removal were over 99.9%, following the solubilities (K_sp) of the corresponding metal sulfides. CO₂ in the mixed gas produced by CS₂ hydrolysis did not affect heavy metals sulfidation due to the presence of abundant H⁺. Finally, a pilot-scale experiment successfully demonstrated the practical effects. Therefore, this novel on-site HC-H₂S production method adequately achieved heavy metals removal requirements in acidic effluents.

Role of Metals and Thiolate Ligands in the Structures and Electronic Properties of Group 5 Bimetallic-Thiolate Complexes

Syntheses, structures, and electronic properties of group 5 metal-thiolate complexes that exhibit unusual coordination modes of thiolate ligands have been established. Room-temperature reaction of [Cp*VCl₂]₃ (Cp* = η⁵-C₅Me₅) with Na₅[B(SCH₂S)₄] led to the formation of [Cp*VO{(SCH₂)₂S}] (1). The solid-state X-ray structure of 1 shows the formation of six-membered l,3,5-trithia-2-vanadacyclohexane that adopted a chair conformation. In a similar fashion, reactions of heavier group 5 precursors [Cp*MCl₄] (M = Nb or Ta) with Na₅[B(SCH₂S)₄] yielded bimetallic thiolate complexes [(Cp*M)₂(μ-S){μ-C(H)S₃-κ²S:κ²S',S″}{μ-SC(H)S-κ²C:κ²S‴,S''''}] (3a: M = Nb and 3b: M = Ta). One of the key features of molecules 3a and 3b is the presence of square-pyramidal carbon, which is quite unusual. The reactions also yielded bimetallic methanedithiolate complexes [(Cp*Nb)₂(μ-S)(μ-SCH₂S-κ²S,S')(μ,η²:η²-BH₃S)] (2) and [(Cp*Ta)₂(μ-O)(μ-SCH₂S-κ²S,S')(μ-H){μ-S₂C(H)SCH₂S-κ²S″:κ²S‴,S''''}] (4). Complex 2 contains a methanedithiolate ligand that stabilizes the unsaturated niobaborane species. On the other hand, one ((mercaptomethyl)thio)methanedithiolate ligand {C₂H₄S₃} is present in 4, which is coordinated to metal centers and exhibits the {μ-κ²S″:κ²S‴,S''''} bonding mode. Along with the formation of 3b and 4, the reaction of [Cp*TaCl₄] with Na₅[B(SCH₂S)₄] yielded [(Cp*Ta)₂(μ-S){μ-(SBS)S(CH₂S)₂(BH₂S)-κ²B:κ²S:κ⁴S',S″,S‴,S''''}] (5) containing a trithiaborate unit (BS₃). Complex 5 consists of pentacoordinate boron that resides in a square-pyramidal environment. All the complexes have been characterized by multinuclear NMR, UV-vis spectroscopy, mass spectrometry, and single-crystal X-ray diffraction studies.

Inhibition of urease activity by different compounds provides insight into the modulation and association of bacterial nickel import and ureolysis

The nickel-dependent urease enzyme is responsible for the hydrolysis of urea to ammonia and carbon dioxide. A number of bacteria produce urease (ureolytic bacteria) and are associated with various infectious diseases and ammonia emissions from agriculture. We report the first comprehensive comparison of the inhibition of urease activity by compounds analysed under the same conditions. Thus, 71 commercially available compounds were screened for their anti-ureolytic properties against both the ureolytic bacterium Klebsiella pneumoniae and purified jack bean urease. Of the tested compounds, 30 showed more than 25% inhibition of the ureolytic activity of Klebsiella pneumoniae or jack bean urease, and among these, carbon disulfide, N-phenylmaleimide, diethylenetriaminepentaacetic acid, sodium pyrrolidinedithiocarbamate, 1,2,4-butanetricarboxylic acid, tannic acid, and gallic acid have not previously been reported to possess anti-ureolytic properties. The diverse effects of metal ion chelators on ureolysis were investigated using a cellular nickel uptake assay. Ethylenediaminetetraacetic acid (EDTA) and dimethylglyoxime (DMG) clearly reduced the nickel import and ureolytic activity of cells, oxalic acid stimulated nickel import but reduced the ureolytic activity of cells, 1,2,4-butanetricarboxylic acid strongly stimulated nickel import and slightly increased the ureolytic activity of cells, while L-cysteine had no effect on nickel import but efficiently reduced the ureolytic activity of cells.

Access to 1,3-oxazine-2,4-diones/1,3-thiazine-2,4-diones via organocatalytic CO2/COS incorporation into allenamides

Organocatalyzed [4 + 2] annulation of CO₂/COS with allenamides is firstly reported to synthesize 1,3-oxazine-2,4-diones and 1,3-thiazine-2,4-diones in moderate to excellent yields under mild reaction conditions. The catalytic potential of a series of Lewis base CO₂ and COS adducts are particularly noted for this process, which features high regio- and chemo-selectivity, step-economy, facile scalability, and easy product derivatization. This study offers the potential for the application of organocatalytic systems for CO₂ and COS chemical transformation.

Investigation on the simultaneous removal of COS, CS2 and O2 from coke oven gas by hydrogenation on a Pd/Al2O3 catalyst

Simultaneous hydrogenation of organosulfur compounds and O₂ by Pd/Al₂O₃ catalyst was studied in a fixed bed reactor and by DRIFTS.

Reactivity patterns for the activation of CO2 and CS2 with alumoxane and aluminum hydrides

Carbon dioxide is readily fixed when reacting with either alumoxane dihydride [{MeLAl(H)}2(μ-O)] (1) or aluminum dihydride [MeLAlH2] (2) (MeL = HC[(CMe)N(2,4,6-Me3C6H2)]2-) to produce bimetallic aluminum formates [(MeLAl)2(μ-OCHO)2(μ-O)] (3) and [(MeLAl)2(μ-OCHO)2(μ-H)2] (5), respectively. Furthermore, [(MeLAl)2(μ-OCHO)2(μ-OH)2] (4) is easily obtained upon the reaction of 3 or 5 with H2O. The stability of the unusual dialuminum diformate dihydride core observed in 5 stems from the proximity of the Al centers allowing the formation of two Al-HAl bridges and precluding further hydride transfer to the HCO2 moieties. Contrary to this behavior, 1 and 2 react with CS2 giving cyclic alumoxane and aluminum sulfides [(MeLAl)2(μ-S)(μ-O)] (6) and [{MeLAl(μ-S)}2] (7), respectively. The molecular structures of 3-7 were characterized by IR, Raman, solution or solid-state (MAS) NMR spectroscopy and mass spectrometry and for 4-7 were characterized by X-ray diffraction studies. NMR kinetic studies and DFT calculations suggest that the mechanisms for the formation of 6 and 7 involve the transfer of a hydride group forming transient aluminum thioformate intermediates which proceed to form Al-S-Al moieties through the cleavage of C-S bonds and insertion of a sulfur atom, followed by the elimination of thioformaldehyde.

Cleavage of Carbon Disulfide by n-Propyldiphenylphosphine and Nickel(II) Bromide

Carbon disulfide is cleaved by n-propyldiphenylphosphine and nickel(II) bromide in a one-step process, to form two unprecedented complexes: orange, [Ni(S₂ C₂ (Pⁿ PrPh₂ )₂ )Br(Pⁿ PrPh₂ )]Br⋅CS₂ (1) and purple [Ni{η² -SC(Pⁿ PrPh₂ )₂ }Br(Pⁿ PrPh₂ )]Br⋅0.5CS₂ (2). Orange (1) contains a dithiolene-related ligand that results from carbon-carbon bond formation, while purple (2) contains a remarkable ligand in which two n-propyldiphenylphosphine molecules have added to a carbon atom of a CS unit that is coordinated to nickel.

Synthesis of Trithia-Borinane Complexes Stabilized in Diruthenium Core: [(Cp*Ru)2(η1-S)(η1-CS){(CH2)2S3BR}] (R = H or SMe)

The thermolysis of arachno-1 [(Cp*Ru)2(B3H8)(CS2H)] in the presence of tellurium powder yielded a series of ruthenium trithia-borinane complexes: [(Cp*Ru)2(η1-S)(η1-CS){(CH2)2S3BH}] 2, [(Cp*Ru)2(η1-S)(η1-CS){(CH2)2S3B(SMe)}] 3, and [(Cp*Ru)2(η1-S)(η1-CS){(CH2)2S3BH}] 4. Compounds 2–4 were considered as ruthenium trithia-borinane complexes, where the central six-membered ring {C2BS3} adopted a boat conformation. Compounds 2–4 were similar to our recently reported ruthenium diborinane complex [(Cp*Ru){(η2-SCHS)CH2S2(BH2)2}]. Unlike diborinane, where the central six-membered ring {CB2S3} adopted a chair conformation, compounds 2–4 adopted a boat conformation. In an attempt to convert arachno-1 into a closo or nido cluster, we pyrolyzed it in toluene. Interestingly, the reaction led to the isolation of a capped butterfly cluster, [(Cp*Ru)2(B3H5)(CS2H2)] 5. All the compounds were characterized by 1H, 11B{1H}, and 13C{1H} NMR spectroscopy and mass spectrometry. The molecular structures of complexes 2, 3, and 5 were also determined by single-crystal X-ray diffraction analysis.

Metallo-supramolecular assembly of protic pincer-type complexes: encapsulation of dinitrogen and carbon disulfide into a multiproton-responsive diruthenium cage

A protic pincer complex and rigid diphosphine linker formed a cage, which incorporated N₂ and CS₂ into the multiproton-responsive cavity.

The effect of coordination of alkanes, Xe and CO2 (η1-OCO) on changes in spin state and reactivity in organometallic chemistry: a combined experimental and theoretical study of the photochemistry of CpMn(CO)3

A combined experimental and theoretical study is presented of several ligand addition reactions of the triplet fragment 3CpMn(CO)2 formed upon photolysis of CpMn(CO)3. Experimental data are provided for reactions in n-heptane and perfluoromethylcyclohexane (PFMCH), as well as in PFMCH doped with C2H6, Xe and CO2. In PFMCH we find that the conversion of 3CpMn(CO)2 to 1CpMn(CO)2(PFMCH) is much slower (τ = 18 (±3) ns) than the corresponding reactions in conventional alkanes (τ = 111 (±10) ps). We measure the effect of the coordination ability by doping PFMCH with alkane, Xe and CO2; these doped ligands form the corresponding singlet adducts with significantly variable formation rates. The reactivity as measured by the addition timescale follows the order 1CpMn(CO)2(C5H10) (τ = 270 (±10) ps) > 1CpMn(CO)2Xe (τ = 3.9 (±0.4) ns) ∼ 1CpMn(CO)2(CO2) (τ = 4.7 (±0.5) ns) > 1CpMn(CO)2(C7F14) (τ = 18 (±3) ns). Electronic structure theory calculations of the singlet and triplet potential energy surfaces and of their intersections, together with non-adiabatic statistical rate theory, reproduce the observed rates semi-quantitatively. It is shown that triplet adducts of the ligand and 3CpMn(CO)2 play a role in the kinetics, and account for the variable timescales observed experimentally.

Organocatalytic cycloaddition of carbonyl sulfide with propargylic alcohols to 1,3-oxathiolan-2-ones

Lewis base-COS adducts were firstly studied as organocatalysts for the cyclization of propargylic alcohols with carbonyl sulfide.

Controlling the nucleophilic properties of cobalt salen complexes for carbon dioxide capture

The nucleophilic properties of cobalt salen complexes are examined using density functional theory to investigate its carbon fixing capacity.

Cooperative adsorption of carbon disulfide in diamine-appended metal-organic frameworks

Over one million tons of CS₂ are produced annually, and emissions of this volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed diamine-appended metal–organic frameworks capable of selectively capturing CO₂ through a cooperative insertion mechanism that promotes efficient adsorption–desorption cycling. We therefore sought to explore the ability of these materials to capture CS₂ through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS₂ is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M₂(dobpdc) (M = Mg, Mn, Zn; dobpdc^4- = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. In the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. This work demonstrates that the cooperative insertion mechanism can be generalized to other high-impact target molecules.

The large-scale production of CS₂ presents both environmental and biological hazards, yet adsorbents capable of CS₂ capture remain scarcely explored. Here, Long and colleagues demonstrate that CS₂ is adsorbed in diamine-appended metal–organic frameworks through a cooperative and chemically specific insertion process.

A rare three-dimensional POM-based inorganic metal polymer bonded by CO2 with high catalytic performance for CO2 cycloaddition

A rare inorganic framework constructed from CO₂ and polyoxoanions exhibits interesting performance in the cycloaddition of CO₂ with epoxides.

Insertion of CS2into the Mg–H bond: synthesis and structural characterization of the magnesium dithioformate complex, [TismPriBenz]Mg(κ2-S2CH)

Insertion of CS₂into the Mg–H bond of [Tism^PriBenz]MgH affords [Tism^PriBenz]Mg(κ²-S₂CH), the first structurally characterized magnesium dithioformate compound.

Terminal Uranium(V/VI) Nitride Activation of Carbon Dioxide and Carbon Disulfide: Factors Governing Diverse and Well-Defined Cleavage and Redox Reactions

The reactivity of terminal uranium(V/VI) nitrides with CE₂ (E=O, S) is presented. Well-defined C=E cleavage followed by zero-, one-, and two-electron redox events is observed. The uranium(V) nitride [U(Tren^TIPS )(N)][K(B15C5)₂ ] (1, Tren^TIPS =N(CH₂ CH₂ NSiiPr₃ )₃ ; B15C5=benzo-15-crown-5) reacts with CO₂ to give [U(Tren^TIPS )(O)(NCO)][K(B15C5)₂ ] (3), whereas the uranium(VI) nitride [U(Tren^TIPS )(N)] (2) reacts with CO₂ to give isolable [U(Tren^TIPS )(O)(NCO)] (4); complex 4 rapidly decomposes to known [U(Tren^TIPS )(O)] (5) with concomitant formation of N₂ and CO proposed, with the latter trapped as a vanadocene adduct. In contrast, 1 reacts with CS₂ to give [U(Tren^TIPS )(κ² -CS₃ )][K(B15C5)₂ ] (6), 2, and [K(B15C5)₂ ][NCS] (7), whereas 2 reacts with CS₂ to give [U(Tren^TIPS )(NCS)] (8) and "S", with the latter trapped as Ph₃ PS. Calculated reaction profiles reveal outer-sphere reactivity for uranium(V) but inner-sphere mechanisms for uranium(VI); despite the wide divergence of products the initial activation of CE₂ follows mechanistically related pathways, providing insight into the factors of uranium oxidation state, chalcogen, and NCE groups that govern the subsequent divergent redox reactions that include common one-electron reactions and a less-common two-electron redox event. Caution, we suggest, is warranted when utilising CS₂ as a reactivity surrogate for CO₂ .

Cluster transformation of [Cu3(μ3-H)(μ3-BH4)((PPh2)2NH)3](BF4) to [Cu3(μ3-H)(μ2,μ1-S2CH)((PPh2)2NH)3](BF4) via reaction with CS2. X-ray structural characterisation and reactivity of cationic clusters explored by multistage mass spectrometry and computational studies

[Cu₃(μ₃-H)(μ₃-BH₄)((PPh₂)₂NH)₃](BF₄) reacts with CS₂ to produce [Cu₃(μ₃-H)(μ₂,μ₁-S₂CH)((PPh₂)₂NH)₃](BF₄), whose cation loses CH₂S upon ligand loss.

Carbon disulfide. Just toxic or also bioregulatory and/or therapeutic?

The overview presented here has the goal of examining whether carbon disulfide (CS₂) may play a role as an endogenously generated bioregulator and/or has therapeutic value.

Hydrolytic cleavage of both CS2 carbon-sulfur bonds by multinuclear Pd(II) complexes at room temperature

Developing homogeneous catalysts that convert CS₂ and COS pollutants into environmentally benign products is important for both fundamental catalytic research and applied environmental science. Here we report a series of air-stable dimeric Pd complexes that mediate the facile hydrolytic cleavage of both CS₂ carbon-sulfur bonds at 25 °C to produce CO₂ and trimeric Pd complexes. Oxidation of the trimeric complexes with HNO₃ regenerates the dimeric starting complexes with the release of SO₂ and NO₂. Isotopic labelling confirms that the carbon and oxygen atoms of CO₂ originate from CS₂ and H₂O, respectively, and reaction intermediates were observed by gas-phase and electrospray ionization mass spectrometry, as well as by Fourier transform infrared spectroscopy. We also propose a plausible mechanistic scenario based on the experimentally observed intermediates. The mechanism involves intramolecular attack by a nucleophilic Pd-OH moiety on the carbon atom of coordinated µ-OCS₂, which on deprotonation cleaves one C-S bond and simultaneously forms a C-O bond. Coupled C-S cleavage and CO₂ release to yield [(bpy)₃Pd₃(µ₃-S)₂](NO₃)₂ (bpy, 2,2'-bipyridine) provides the thermodynamic driving force for the reaction.

Activation of heteroallenes by coordinatively unsaturated nickel(ii) alkyl complexes supported by the hydrotris(3-phenyl-5-methyl)pyrazolyl borate (Tp(Ph,Me)) ligand

Activation of sulfur containing heteroallenes by nickel(ii) alkyl complexes supported by the bulky hydrotris(3-phenyl-5-methylpyrazolyl)borate (Tp(Ph,Me)) ligand is described. Exposure of Tp(Ph,Me)NiCH2Ph (1a) and Tp(Ph,Me)NiCH2Si(CH3)3 (1b) to CS2 resulted in formation of the insertion products Tp(Ph,Me)Ni(η(2)-CS2)CH2Ph (2a) and Tp(Ph,Me)Ni(η(2)-CS2)CH2Si(CH3)3 (2b) in moderate yields. Reaction of 1a and MeNCS produced two species in a 1 : 1 ratio, identified as Tp(Ph,Me)Ni(η(2)-MeNC)CH2Ph (3) and Tp(Ph,Me)Ni(η(2)-MeNCS)SCH2Ph (4). Isolation of the unexpected insertion product (3) prompted an investigation into the activity of 1a-b in the presence of isocyanides (i.e.(t)BuNC), which resulted in isolation of Tp(Ph,Me)Ni(η(2-t)BuNC)CH2Ph (5a) and Tp(Ph,Me)Ni(η(2-t)BuNC)CH2Si(CH3)3 (5b). Similarly, reaction of 1a with OCS led to the isolation of a rare example of a Ni(i) carbonyl species Tp(Ph,Me)NiCO (6). Alternatively, complex 6 was also formed by exposure of 1a-b to an atmosphere of CO. Isolation of the intermediate species (Tp(Ph,Me)Ni(η(2)-CO)CH2TMS (7b) and Tp(Ph,Me)Ni(CO)(C(O)R, (8a-b) with R = Ph, TMS)) shed light on the formation of such species.