Comparison of the N-terminal sequences of aspartate and ornithine carbamoyltransferases of Escherichia coli

Biosynthesis of Arginine and Polyamines

Early investigations on arginine biosynthesis brought to light basic features of metabolic regulation. The most significant advances of the last 10 to 15 years concern the arginine repressor, its structure and mode of action in both E. coli and Salmonella typhimurium, the sequence analysis of all arg structural genes in E. coli and Salmonella typhimurium, the resulting evolutionary inferences, and the dual regulation of the carAB operon. This review provides an overall picture of the pathways, their interconnections, the regulatory circuits involved, and the resulting interferences between arginine and polyamine biosynthesis. Carbamoylphosphate is a precursor common to arginine and the pyrimidines. In both Escherichia coli and Salmonella enterica serovar Typhimurium, it is produced by a single synthetase, carbamoylphosphate synthetase (CPSase), with glutamine as the physiological amino group donor. This situation contrasts with the existence of separate enzymes specific for arginine and pyrimidine biosynthesis in Bacillus subtilis and fungi. Polyamine biosynthesis has been particularly well studied in E. coli, and the cognate genes have been identified in the Salmonella genome as well, including those involved in transport functions. The review summarizes what is known about the enzymes involved in the arginine pathway of E. coli and S. enterica serovar Typhimurium; homologous genes were identified in both organisms, except argF (encoding a supplementary OTCase), which is lacking in Salmonella. Several examples of putative enzyme recruitment (homologous enzymes performing analogous functions) are also presented.

Structural similarity between ornithine and aspartate transcarbamoylases of Escherichia coli: characterization of the active site and evidence for an interdomain carboxy-terminal helix in ornithine transcarbamoylase

Predictions of tertiary structures of proteins from their amino acid sequences are facilitated greatly when the structures of homologous proteins are known. On this basis, structural features of Escherichia coli ornithine transcarbamoylase (OTCase) were investigated by site-directed mutagenesis experiments based on the known tertiary structure of the catalytic (c) chain of E. coli aspartate transcarbamoylase (ATCase). In ATCase, each c chain is composed of two globular domains connected by two interdomain helices, one of which is near the C-terminus and is critical for the in vivo folding of the chains and their assembly into trimers. Each active site is located at the interface between two chains and requires the participation of residues from each of the adjacent chains. OTCase, a trimeric enzyme, has been proposed to be similar in structure to the ATCase trimer on the basis of sequence identity (32%), the nature of the reaction catalyzed by the enzyme, and secondary structure predictions. As shown here, analysis of OTCase and ATCase sequences revealed extensive evolutionary conservation in portions corresponding to the ATCase active site and the C-terminal helix. Truncations and substitutions within the predicted C-terminal helix of OTCase had effects on activity and thermal stability strikingly similar to those caused by analogous alterations in ATCase. Similarly, substitutions at either of two conserved residues, Ser 55 and Lys 86, in the proposed active site of OTCase had deleterious effects parallel to those caused by the analogous ATCase substitutions. Hybrid trimers comprised of chains from both these relatively inactive OTCase mutants exhibited dramatically increased activity, as predicted for shared active sites located at the chain interfaces. These results strongly support the hypothesis that the tertiary and quaternary structures of the two enzymes are similar.

4-Oxalocrotonate tautomerase, a 41-kDa homohexamer: backbone and side-chain resonance assignments, solution secondary structure, and location of active site residues by heteronuclear NMR spectroscopy

4-Oxalocrotonate tautomerase (4-OT), a homohexamer consisting of 62 residues per subunit, catalyzes the isomerization of unsaturated alpha-keto acids using Pro-1 as a general base (Stivers et al., 1996a, 1996b). We report the backbone and side-chain 1H, 15N, and 13C NMR assignments and the solution secondary structure for 4-OT using 2D and 3D homonuclear and heteronuclear NMR methods. The subunit secondary structure consists of an alpha-helix (residues 13-30), two beta-strands (beta 1, residues 2-8; beta 2, residues 39-45), a beta-hairpin (residues 50-57), two loops (I, residues 9-12; II, 34-38), and two turns (I, residues 30-33; II, 47-50). The remaining residues form coils. The beta 1 strand is parallel to the beta 2 strand of the same subunit on the basis of cross stand NH(i)-NH(j) NOEs in a 2D 15N-edited 1H-NOESY spectrum of hexameric 4-OT containing two 15N-labeled subunits/hexamer. The beta 1 strand is also antiparallel to another beta 1 strand from an adjacent subunit forming a subunit interface. Because only three such pairwise interactions are possible, the hexamer is a trimer of dimers. The diffusion constant, determined by dynamic light scattering, and the rotational correlation time (14.5 ns) estimated from 15N T1/T2 measurements, are consistent with the hexameric molecular weight of 41 kDa. Residue Phe-50 is in the active site on the basis of transferred NOEs to the bound partial substrate 2-oxo-1,6-hexanedioate. Modification of the general base, Pro-1, with the active site-directed irreversible inhibitor, 3-bromopyruvate, significantly alters the amide 15N and NH chemical shifts of residues in the beta-hairpin and in loop II, providing evidence that these regions change conformation when the active site is occupied.

Structural similarity between ornithine and aspartate transcarbamoylases of Escherichia coli: implications for domain switching

Each catalytic (c) polypeptide chain of Escherichia coli aspartate transcarbamoylase (ATCase) is composed of two globular domains connected by two interdomain helices. Helix 12, near the C-terminus, extends from the second domain back through the first domain, bringing the two termini close together. This helix is of critical importance for the assembly of a stable enzyme. The trimeric E. coli enzyme ornithine transcarbamoylase (OTCase) is proposed to be similar in tertiary and quaternary structure to the ATCase trimer and has a predicted alpha-helical segment near its C-terminus. In our companion paper, we have shown that this putative helix is essential for OTCase folding and assembly (Murata L, Schachman HK, 1996, Protein Sci 5:709-718). Here, the similarity between OTCase and the ATCase trimer, which are 32% identical in sequence, was tested further by the construction of several chimeras in which various structural elements were switched between the enzymes by genetic techniques. These elements included the two globular domains and regions containing the C-terminal helices. In contrast to results reported previously (Houghton J, O'Donovan G, Wild J, 1989, Nature 338:172-174), none of the chimeric proteins exhibited in vivo activity and all were insoluble when overexpressed. Attempts to make hybrid trimers composed of c chains from ATCase and OTCase were also unsuccessful. These results underscore the complexities of specific intrachain and interchain side-chain interactions required to maintain tertiary and quaternary structures in these enzymes.

Nucleotide sequence of the ARG3 gene of the yeast Saccharomyces cerevisiae encoding ornithine carbamoyltransferase. Comparison with other carbamoyltransferases

The complete nucleotide sequence of the ARG3 structural gene encoding the monomer of the trimeric ornithine carbamoyltransferase (OTCase) (EC 2.1.3.3) has been determined. It consists of 338 codons with a corresponding molecular mass of 37842 Da. Comparing OTCases from Escherichia coli, yeast, Aspergillus, rat and man emphasizes peculiarities of the yeast enzyme but also brings to light an important degree of conservation between these proteins. Comparing the various OTCases with E. coli aspartate carbamoyltransferase (ATCase) (EC 2.1.3.2) confirms the evolutionary relationship previously noted between the two types of carbamoyltransferases and points to residues probably involved in catalysis and structural folding in OTCases.

Structure-function relationship in allosteric aspartate carbamoyltransferase from Escherichia coli. I. Primary structure of a pyrI gene encoding a modified regulatory subunit

In a previous article, we have identified a lambda bacteriophage directing the synthesis of a modified aspartate carbamoyltransferase lacking substrate-co-operative interactions and insensitive to the feedback inhibitor CTP. These abnormal properties were ascribed to a mutation in the gene pyrI encoding the regulatory polypeptide chain of the enzyme. We now report the sequence of the mutated pyrI and show that, during the generation of this pyrBI-bearing phage, six codons from lambda DNA have been substituted for the eight terminal codons of the wild-type gene. A model is presented for the formation of this modified pyrI gene during the integrative recombination of the parental lambda phage with the Escherichia coli chromosome. An accompanying paper emphasizes the importance of the carboxy-terminal end of the regulatory chain for the homotropic and heterotropic interactions of aspartate carbamoyltransferase.

Immunological and structural relatedness of catabolic ornithine carbamoyltransferases and the anabolic enzymes of enterobacteria

Purified catabolic ornithine carbamoyltransferase of Pseudomonas putida and anabolic ornithine carbamoyltransferase (argF product) of Escherichia coli K-12 were used to prepare antisera. The two specific antisera gave heterologous cross-reactions of various intensities with bacterial catabolic ornithine carbamoyltransferases formed by Pseudomonas and representative organisms of other bacterial genera. The immunological cross-reactivity observed only between the catabolic ornithine carbamoyltransferases and the anabolic enzymes of enterobacteria suggests that these proteins share some structural similarities. Indeed, the amino acid composition of the anabolic ornithine carbamoyltransferase of E. coli K-12 (argF and argI products) closely resembles the amino acid compositions of the catabolic enzymes of Pseudomonas putida, Aeromonas formicans, Streptococcus faecalis, and Bacillus licheniformis. Comparison of the N-terminal amino acid sequence of the E. coli anabolic ornithine carbamoyltransferase with that of the A. formicans and Pseudomonas putida catabolic enzymes shows, respectively, 45 and 28% identity between the compared positions; the A. formicans sequence reveals 53% identity with the Pseudomonas putida sequence. These results favor the conclusion that anabolic ornithine carbamoyltransferases of enterobacteria and catabolic ornithine carbamoyltransferases derive from a common ancestral gene.

Evolutionary divergence of genes for ornithine and aspartate carbamoyl-transferases--complete sequence and mode of regulation of the Escherichia coli argF gene; comparison of argF with argI and pyrB

The complete nucleotide sequence of argF is presented, together with that of an operator-constitutive mutant. ArgF is compared with the other gene coding for ornithine carbamoyltransferase (OTCase) in E. coli K-12, argI, and with pyrB, encoding the catalytic monomer of aspartate carbamoyltransferase (ATCase). ArgF and argI appear very closely related having emerged from a relatively recent ancestor gene. The relationship between OTCase and ATCase appears more distant. Nevertheless, the homology observed between the two proteins (mainly in the polar domain) suggests a common origin.

Protein differentiation: a comparison of aspartate transcarbamoylase and ornithine transcarbamoylase from Escherichia coli K-12

The amino acid sequence of aspartate transcarbamoylase (carbamoylphosphate:L-aspartate carbamoyltransferase, EC 2.1.3.2) has been compared with that of ornithine transcarbamoylase (carbamoylphosphate:L-ornithine carbamoyltransferase, EC 2.1.3.3). The primary sequence homology is 25-40%, depending upon the alignment of homologous residues. The homologies are incorporated into discrete clusters and are interrupted by regions of length polymorphism. The most striking homologies correspond to regions putatively involved in the binding of the common substrate, carbamoyl phosphate. Chou-Fasman predictive analysis [Chou, P. Y. & Fasman, G. D. (1974) Biochemistry 13, 211-222; 222-245] indicates substantial conservation of secondary structural elements within the two enzymes, even in regions whose primary sequence is quite divergent. The results reported herein demonstrate that the two enzymes, aspartate transcarbamoylase and ornithine transcarbamoylase, share a common evolutionary origin and appear to have retained similar structural conformations throughout their evolutionary development.

Location of amino acid alterations in mutants of aspartate transcarbamoylase: Structural aspects of interallelic complementation

Recent genetic studies of the pyrB locus of Escherichia coli resulted in the characterization of 29 mutant strains harboring defects in the structural gene that encodes the catalytic chains of aspartate transcarbamoylase (carbamoylphosphate: L-aspartate carbamoyltransferase, EC 2.1.3.2). Three alleles, pyrB554, pyrB730, and pyrB748, have been cloned, and their nucleotide sequences have been determined along with that of the wild-type pyrBI operon in order to locate the sites of the alterations in the catalytic chains. Missense mutation pyrB554 leads to replacement of serine-52 by phenylalanine, and the inactive mutant enzyme has properties similar to those of wild-type aspartate transcarbamoylase. The amber mutation pyrB730 results in unstable truncated polypeptide chains 27 amino acids shorter than wild-type chains. Deletion mutation pyrB748 causes the removal of 181 amino acids. Combining these results with knowledge of the crystallographic structure of the wild-type enzyme provides a basis for tentative structural mechanisms for the observed complementation behavior of the mutant proteins.

The DNA sequence of argI from Escherichia coli K12

The argI gene from E. coli K12 has been sequenced. It contains an open reading frame of 1002 bases which encodes a polypeptide of 334 amino acids. Three such polypeptides are required to form the functional catalytic trimer (c3) of ornithine transcarbamoylase (OTCase-1, EC 2.1.3.3). The molecular mass of the mature trimer deduced from the amino acid sequence is 114,465 daltons. An altered form of argI was produced when a 1.6 kilobase DdeI fragment was subcloned into the HincII site of plasmid pUC8 extending the open reading frame an additional 20 nucleotides. It has been previously reported that the amino-terminal region of the respective polypeptides of argI, argF, and pyrB of E. coli possessed significant homology. In contrast, the homologous promoter/operator regions of argI and argF did not appear to share any homologies with pyrB. However, a closer scrutiny of the nucleotide sequence immediately preceding the pyrBI attenuator revealed a remarkable similarity to the argI and argF control region.

Allosteric cofactor-mediated enzyme cooperativity: a theoretical treatment

The situation under which substrate cooperativity is apparent only in the presence of an inhibitor has been investigated. When a substrate and an inhibitor bind independently to a cooperative enzyme that conforms to the concerted Monod-Wyman-Changeux model, each of the two ligands must induce intersubunit transitions in the protein molecule in order to have their allosteric effects coupled to one another. The inhibitor exerts a heterotropic influence on the saturation function of the substrate and enhances the otherwise recondite homotropic effect of the latter. If the ligands bind competitively to the enzyme, however, intersubunit transitions in the enzyme need be induced only by the inhibitor. A sigmoidal substrate saturation curve is then obtained as a result of displacement of the inhibitor from the enzyme by the substrate. In this mechanism, the competitive inhibitor participates as a cofactor required for the expression of substrate cooperativity and the familiar ability of regulatory enzymes to mediate homotropic interactions directly between substrate molecules is absent. Experimental tests are proposed to elucidate the nature of cooperative interactions for enzymes that appear to retain heterotropic but not homotropic effects in substrate binding.

Nucleotide sequence of the structural gene (pyrB) that encodes the catalytic polypeptide of aspartate transcarbamoylase of Escherichia coli

The deoxyribonucleotide sequence of pyrB, the cistron encoding the catalytic subunit of aspartate transcarbamoylase (carbamoylphosphate: L-aspartate carbamoyltransferase, EC 2.1.3.2), has been determined. The pyrB gene encodes a polypeptide of 311 amino acid residues initiated by an NH2-terminal methionine that is not present in the catalytically active polypeptide. The DNA sequence analysis revealed the presence of an eight-amino-acid sequence beginning at Met-219 that was not detected in previous analyses of amino acid sequence. This octapeptide sequence provides an additional component of the disordered loop in the equatorial domain of the catalytic polypeptide. It had been found previously that the catalytic polypeptide is expressed from a bicistronic operon that also produces the regulatory polypeptide encoded by pyrI. A single transcriptional control region precedes the structural gene of the catalytic polypeptide and a simple 15-base-pair region separates its COOH terminus from the structural gene of the regulatory polypeptide. The chain-terminating codon of the catalytic polypeptide may contribute to the ribosomal binding site for the regulatory polypeptide and thus assist coordinate expression of the two cistrons.

Amino acid sequence of the catalytic subunit of aspartate transcarbamoylase from Escherichia coli

We propose a primary structure for the catalytic subunit of aspartate transcarbamoylase (aspartate carbamoyltransferase; carbamoylphosphate: L-aspartate carbamoyltransferase, EC 2.1.3.2) from Escherichia coli based on amino acid sequences of fragments obtained by cyanogen bromide cleavage, by tryptic digestion of the succinylated polypeptide, and by chymotryptic and proteinase C digestion of the intact catalytic chain. The protein contains 310 amino acids and has a calculated molecular weight of 33,944. The negatively and positively charged residues are distributed uniformly, and there is no indication of charge clustering in the linear sequence.

Attenuation control of pyrBI operon expression in Escherichia coli K-12

The pyrBI operon of Escherichia coli K-12 encodes the subunits of the pyrimidine biosynthetic enzyme aspartate transcarbamylase (carbamoylphosphate:L-aspartate carbamoyltransferase, EC 2.1.3.2). Expression of this operon apparently is negatively regulated by the intracellular levels of UTP. To elucidate the regulatory mechanism in which UTP functions, the nucleotide sequence of the promoter-regulatory region of the pyrBI operon was determined and DNA fragments containing this region were transcribed in vitro. These experiments revealed a rho-independent transcriptional terminator (attenuator) located only 23 base pairs before the promoter-proximal end of the structural genes. Transcription initiated upstream at either of two potential pyrBI promoters was efficiently (approximately equal to 98%) terminated at this site, indicating that the regulation of pyrBI expression involves attenuation control. Additional features identified suggest a model for regulation in which the relative rates of UTP-dependent transcription within the pyrBI leader region and coupled translation of the leader transcript control transcriptional termination at the attenuator.

The organization and regulation of the pyrBI operon in E. coli includes a rho-independent attenuator sequence

1. The two polypeptide chains that comprise aspartate carbamoyltransferase in Escherichia coli are encoded by adjacent cistrons expressed in the order, promoter-leader-catalytic cistron-regulatory cistron (p-leader-pyrBI). These two cistrons and their single control region have been cloned as a 2,800 base pair (bp) fragment (The minimal coding requirement for the catalytic and regulatory polypeptides is about 1,350 bp plus control regions). The genes contained by this fragment are subject to normal repression controls and thus possess the intact control regions. 2. By deleting an internal fragment with specific restriction endonucleases, it was possible to construct shortened fragments which no longer produced the regulatory polypeptide. In these cases the expression of the catalytic cistron was normal and subject to repression upon growth in the presence of uracil. Since the pyrB cistron retained transcriptional control, the regulatory polypeptide was not required for expression or control of the catalytic cistron. As expected, the catalytic trimer (Mr = 100,000 daltons) from these deletion mutants had no effector response nor did it exhibit homotropic kinetics for aspartate. The enzyme was identical to the c3 trimer purified from the native holoenzyme by neohydrin dissociation. 3. Insertion of Mu d1(lac Apr) into the structural region of pyrB had a negative effect on the expression of pyrI. This supports the idea that the catalytic and regulatory polypeptide chains of aspartate carbamoyl-transferase are encoded by a single bicistronic operon. Detailed restriction analysis of the cloned pyrBI region has produced a genetic map of restriction sites which is colinear with the published amino acid sequences of the two polypeptides. These maps indicate that the 3'-terminus of the catalytic cistron is adjacent to the 5'-terminus of the regulatory cistron and separated by 10-20 bp. 4. DNA sequence analysis of the 5'-proximal regions of pyrBI revealed that an extensive leader sequence separated the promoter and first structural gene pyrB. This leader of approximately 150 bp contains an attenuator sequence and the translational signals required for the production of a leader polypeptide of 43 amino acids. In this paper we describe the structural organization of pyrBI, and provide a detailed analysis of its regulatory region including its DNA sequence.

Incorporation of amino acid analogs during the biosynthesis of Escherichia coli aspartate transcarbamylase

Amino acid-requiring mutants capable of producing derepressed levels of aspartate transcarbamylase (carbamoylphosphate:L-aspartate carbamoyltransferase, EC 2.1.3.2) were obtained and used for the incorporation in this enzyme of eight different amino acid analogs. These amino acid replacements enabled the biosynthesis of a series of modified aspartate transcarbamylases altered in their catalytic or regulatory properties. The enzyme in which phenylalanine was rereplaced by 2-fluorophenylalanine was purified to homogeneity and appeared to have the same specific activity as normal asparate transcarbamylase but lacking both homotropic and heterotropic interactions.

Structure and properties of the putrescine carbamoyltransferase of Streptococcus faecalis

Ornithine and putrescine carbamoyltransferases from Streptococcus faecalis ATCC11700 have been purified and their structural properties compared. The molecular weight of native ornithine carbamoyltransferase, measured by molecular sieving, is 250 000. It is composed of six apparently identical subunits with a molecular weight of 39 000, as determined by cross-linking with the bifunctional reagent glutaraldehyde followed by polyacrylamide gel electrophoresis in the presence of sodium dodecylsulfate. Using the same method, putrescine carbamoyltransferase is a trimer of 140 000 consisting of three identical subunits with a molecular weight of 40 000. Ornithine carbamoyltransferase displays a narrow specificity towards its substrate, ornithine. In contrast, putrescine carbamoyltransferase carbamoylates ornithine and several diamines (diaminopropane, diaminohexane, spermine, spermidine, cadaverine) in addition to its preferred substrate, putrescine, but with a considerable lower efficiency than for putrescine. The kinetic mechanism of putrescine carbamoyltransferase has been investigated. Initial velocity studies yield intersecting plots using either putrescine or ornithine as substrate, indicating a sequential mechanism. The patterns of protection of the enzyme by the reactants during heat inactivation as well as the results of product and dead-end inhibition studies provide evidence for a random addition of the substrates. The putrescine inhibition that is induced by phosphate does, however, suggest that a preferred pathway exists in which carbamoylphosphate is the leading substrate. The different kinetic constants have been established. The properties of putrescine carbamoyltransferase are compared to the known properties of other carbamoyltransferases. The evolutionary implications of this comparison are discussed.

Cloning and endonuclease restriction analysis of argF and of the control region of the argECBH bipolar operon in Escherichia coli

A 1.8 kb DNA fragment, liberated by endonuclease HindIII, contains the control region of the argECBH bipolar operon near one end and the weak secondary promoter of argH at the other extremity; it has been cloned in plasmid pBR322. The same plasmid vector has been used to clone the argF gene liberated from the chromosome by endonuclease BamHI. Restriction patterns for the two hybrid plasmids have been determined, using enzymes AluI, BglI, EcoRI, HaeIII, HincII, HindIII, HpaI and II, PstI and SalI. Two AluI sites situated on either side of and close to a HincII target delineate two short fragments covering the whole of the argECBH control region. The argF control elements are located in a region accessible to further dissection by BamHI, EcoRI, PstI and HindIII. Carriers of the argF plasmid produce extremely high amounts of ornithine carbamoyltransferase, a feature useful for purification of this enzyme.