Low-temperature 1H-NMR evidence of the folding of isolated ribonuclease S-peptide

Short Oligourea Foldamers as N- or C-Caps for Promoting α-Helix Formation in Water

While foldamers have been extensively studied as protein mimics and especially as α-helix mimics, their use as capping motif to enhance α-helix propensity remains comparatively much limited. In this study, we leverage the structural similarities between urea-based helical foldamers and α-helix to investigate the efficacy of oligoureas as N- or C-caps for reinforcing α-helical structures in water. Short oligoureas, comprising 3 to 4 residues, were strategically introduced at the N- or C-terminus of two peptide sequences (S-peptide and an Ala-rich model sequence). The impact of these foldamer insertions on peptide conformation was examined using electronic circular dichroism (ECD) and solution NMR. This research identifies specific foldamer sequences capable of promoting α-helicity when incorporated at either terminus of the peptides. Not only does this work broaden the application scope of foldamers, but it also provides valuable insights into novel strategies for modulating peptide conformation in aqueous environments. The findings presented in this study may have implications for peptide design and the development of bioactive foldamer-based peptide mimics.

Control of function of a small peptide by a protein

A peptide that functions only in the presence of a protein has been developed using reaction-based selection from peptide phage libraries. The peptide was not functional in the absence of the protein, but formed enaminones with 1,3-diketone derivatives when bound to the protein.

Effect of urea on peptide conformation in water: molecular dynamics and experimental characterization

Molecular dynamics simulations of a ribonuclease A C-peptide analog and a sequence variant were performed in water at 277 and 300 K and in 8 M urea to clarify the molecular denaturation mechanism induced by urea and the early events in protein unfolding. Spectroscopic characterization of the peptides showed that the C-peptide analog had a high alpha-helical content, which was not the case for the variant. In the simulations, interdependent side-chain interactions were responsible for the high stability of the alpha-helical C-peptide analog in the different solvents. The other peptide displayed alpha-helical unwinding that propagated cooperatively toward the N-terminal. The conformations sampled by the peptides depended on their sequence and on the solvent. The ability of water molecules to form hydrogen bonds to the peptide as well as the hydrogen bond lifetimes increased in the presence of urea, whereas water mobility was reduced near the peptide. Urea accumulated in excess around the peptide, to which it formed long-lived hydrogen bonds. The unfolding mechanisms induced by thermal denaturation and by urea are of a different nature, with urea-aqueous solutions providing a better peptide solvation than pure water. Our results suggest that the effect of urea on the chemical denaturation process involves both the direct and indirect mechanisms.

A pH-dependent variation in alpha-helix structure of the S-peptide of ribonuclease A studied by Monte Carlo simulated annealing

Low-energy conformations of the S-peptide fragment (20 amino acid residues long) of ribonuclease A were studied by Monte Carlo simulated annealing. The obtained lowest-energy structures have alpha-helices with different size and location, depending distinctively on the ionizing states of acidic amino acid residues. The simulation started from completely random initial conformation and was performed without any bias toward a particular structure. The most conspicuous alpha-helices arose from the simulation when both Glu 9 and Asp 14 were assumed to be electrically neutral, whereas the resulting conformations became much less helical when Asp 14 rather than Glu 9 was allowed to have a negative charge. Together with experimental evidence that the alpha-helix in the S-peptide is most stable at pH 3.8, we consider the helix formation need the carboxyl group of Asp 14 to be electrically neutral in this weakly acidic condition. In contrast, a negative charge at Asp 14 appears to function in support of a view that this residue is crucial to helix termination owing to its possibility to form a salt bridge with His 12. These results indicate that the conformation of the S-peptide depends considerably on the ionizing state of Asp 14.

Observation of the closing of individual hydrogen bonds during TFE-induced helix formation in a peptide

Helix formation of an S-peptide analog, comprising the first 20 residues of Ribonuclease A and two additional N-terminal residues, was studied by measuring hydrogen bond (H-bond) (h3)J(NC') scalar couplings as a function of 2,2,2-trifluoroethanol (TFE) concentration. The (h3)J(NC') couplings give direct evidence for the closing of individual backbone N-H***O = C H-bonds during the TFE-induced formation of secondary structure. Whereas no (h3)J(NC') correlations could be detected without TFE, alpha-helical (i,i +4) H-bond correlations were observed for the amides of residues A5 to M15 in the presence of TFE. The analysis of individual coupling constants indicates that alpha-helix formation starts at the center of the S-peptide around residue E11 and proceeds gradually from there to both peptide ends as the TFE concentration is increased. At 60% to 90% TFE, well-formed alpha-helical H-bonds were observed for the amides hydrogens of residues K9 to Q13, whereas H-bonds of residues T5 to A8, H14, and M15 are affected by fraying. No intramolecular backbone H-bonds are present at and beyond the putative helix stop signal D16. As the (h3)J(NC') constants represent ensemble averages and the dependence of (h3)J(NC') on H-bond lengths is very steep, the size of the individual (h3)J(NC') coupling constants can be used as a measure for the population of a closed H-bond. These individual populations are in agreement with results derived from the Lifson-Roig theory for coil-to-helix transitions. The present work shows that the closing of individual H-bonds during TFE-induced helix formation can be monitored by changes in the size of H-bond scalar couplings.

Calcium binding peptides from alpha-lactalbumin: implications for protein folding and stability

The calcium binding protein alpha-lactalbumin folds via a molten globule intermediate. Calcium does not bind strongly to the unfolded protein or the molten globule, but does bind to the transition state between the molten globule and the native protein. Of interest are the structures formed in the transition state that promote calcium binding. To study the importance of local secondary structure on calcium binding, we have synthesized two peptides corresponding to the calcium binding site that include the flanking C-helix and 3(10)-helix. The first peptide, elbow-A, consists of residues 72-100 from bovine alpha-lactalbumin, but with Cys 73, Cys 77, and Cys 91 replaced by alanines. In the second peptide, denoted elbow, the cysteines at position 73 and 91 are included and the nativelike disulfide bond is formed. Both peptides are monomeric and unstructured in aqueous solution and bind calcium weakly with apparent K(d)'s on the order of 10(-2) M. In 50% trifluoroethanol (v/v), the peptides are 45% helical as judged by CD. NMR studies performed on elbow and elbow-A in TFE indicate that the helical structure is confined to the C-helix. In this solvent system elbow binds calcium one-to-one with a K(d) of 50 microM. Removing the disulfide bond reduces, but does not eliminate calcium binding (K(d) = 170 microM in 50% TFE). These results suggest that formation of the C-helix promotes calcium binding and may be a key determinant of calcium binding in the transition state.

Folding studies on ribonuclease A, a model protein

Ribonuclease A (RNase A), an unusually well defined enzyme, has been a test protein in the study of a wide variety of chemical and physical methods of protein chemistry. These methods have in turn provided many insights into the functional properties of RNase A, as well as topics of general interest in protein biochemistry. The presence of four disulfide bonds and the existence of two cis peptide bonds preceding prolines in the native state have complicated the analysis of the folding pathway of RNase A. In this review, we present some new information about the folding of RNase A obtained recently by quench-flow H/D exchange combined with NMR and single-jump and double-jump stopped-flow techniques.

Interactions responsible for the pH dependence of the beta-hairpin conformational population formed by a designed linear peptide

In a previous work [Blanco, F.J., Jiménez, M.A., Herranz, J., Rico, M., Santoro, J. & Nieto, J. L. (1993) J. Am. Chem. Soc. 115, 5887-5888] we showed that a short, designed linear peptide, YQNPDGSQA (peptide 1), can form a monomeric beta hairpin in aqueous solution. The pH dependence of the beta-hairpin conformation formed by the designed peptide and a series of related peptides has been examined in this work using 1H-NMR methods. Three pH-dependent interactions have been identified: a local interaction, unimportant structurally, between the C-terminal carboxylate group and the side-chain amide group of Q8; an electrostatic interaction between the main-chain N-terminus and C-terminus; and a hydrogen bond involving the side-chain amide protons of N3 and the side-chain carboxylate group of D5. The latter two interactions are particularly relevant as they increase the population of the beta-hairpin conformation. We also observe in the mutant peptide A9H that the interaction between Y1 and H9 (of the type proposed to exist in proteins) does not contribute to beta-hairpin stabilisation in our peptide system. Peptide 1 is, therefore, a very suitable model to examine the different interactions that contribute to beta-hairpin stability.

Alpha-helix formation by peptides of defined sequence

The factors controlling alpha-helix formation in water by peptides of defined sequence are beginning to be understood. The field is close to the point where the extent of helix formation can be predicted for peptides of any sequence. Our own approach to the problem, and the main results obtained by following this approach, are summarized below. The chief reason for studying alpha-helix formation by peptides is to understand precisely and in detail one part of the protein folding problem. Questions about peptide helix formation can be answered at a fundamental level, in terms of the physico-chemical mechanisms involved.

Structural analysis of peptides encompassing all alpha-helices of three alpha/beta parallel proteins: Che-Y, flavodoxin and P21-ras: implications for alpha-helix stability and the folding of alpha/beta parallel proteins

In an attempt to delineate the early folding events of structurally related proteins with no sequence homology, peptides including all five alpha-helices of three alpha/beta parallel open-sheet proteins, Che-Y, flavodoxin and P21-ras, have been analyzed by circular dichroism (far-UV CD) and nuclear magnetic resonance (NMR) in water and 30% (v/v) trifluoroethanol (TFE). Comparison between the helical content estimations from far-UV CD and the results from the NMR analysis renders a reasonably good qualitative correlation, indicating that the same phenomenon is underlined by both methods. Helix limits, as indicated by the existence of (i,i + 3) nuclear Overhauser effect (NOE) cross-correlations and significant up-field conformational shifts of the C alpha H protons, are practically coincident with those in the folded protein. On the other hand, the conformation of the side-chains differs markedly from those in the folded protein. Observation of NOE cross-correlations between pairs of residues at positions i,i + 3 has been used to statistically quantify free energies of i,i + 3 side-chain-side-chain interactions between the different pairs of residues in an alpha-helix. This analysis indicates that interactions between hydrophobic side-chains seem to be quite favorable for helix formation. The behaviour in aqueous solution of the structural equivalent peptides for the three proteins is quite unrelated except for the peptides corresponding to helices two and five. We postulate that, in the alpha/beta parallel proteins, those helices that join two beta-strands flanking another non-consecutive beta-strand should not be stable for folding reasons.

NMR solution structure of the isolated N-terminal fragment of protein-G B1 domain. Evidence of trifluoroethanol induced native-like beta-hairpin formation

The solution structure of the isolated N-terminal fragment of streptococcal protein-G B1 domain has been investigated in H2O and TFE/H2O solution by CD and NMR to gain insight into the possible role that native beta-hairpin secondary structure elements may have in early protein folding steps. The fragment also has been studied under denaturing conditions (6 M urea), and the resulting NMR chemical shifts were used as a reference for the disordered state. On the basis of CD and NMR data, it is concluded that in aqueous solution the fragment is basically flexible, with two local low populated chain bends involving residues 8-9 and 14-15, respectively, in close agreement with secondary structure predictions, a structure that is different from the final folded state of that segment of the protein. The changes in the CD spectrum, the presence of several medium-range NOEs plus two long-range NOEs, and the sign of the H alpha conformational shifts reveal that the addition of TFE facilitates the formation of a set of transient beta-hairpins involving essentially the same residues that form the native beta-hairpin found in the final three-dimensional structure of the B1 domain. The stabilization of native-like structures by TFE is known to occur for helices, but, to our knowledge, this is the first time the stabilization of a native-like beta-hairpin structure by TFE is reported. Since long-range tertiary interactions are absent in the isolated fragment, our results support the idea that, in addition to helices, beta-hairpins may play an active role in directing the protein folding process.

Necessary conditions for avoiding incorrect polypeptide folds in conformational search by energy minimization

Low energy conformations have been generated for melittin, pancreatic polypeptide, and ribonuclease S-peptide, both in the vicinity of x-ray structures by energy refinement and by an unconstrained search over the entire conformational space. Since the structural polymorphism of these medium-sized peptides in crystal and solution is moderate, comparing the calculated conformation to x-ray and nmr data provides information on local and global behavior of potential functions. Local analysis includes standardization calculations, which show that models with standard geometry can approximate good resolution x-ray data with less than 0.5 A rms deviation (RMSD). However, the atomic coordinates are shifted up to 2 A RMSD by local energy minimization, and thus 2 A is generally the smallest RMSD value one can target in a conformational search using the same energy evaluation models. The unconstrained search was performed by a buildup-type method based on dynamic programming. To accelerate the generation of structures in the conformational search, we used the ECEPP potential, defined in terms of standard polypeptide geometry. A number of low energy conformations were further refined by relaxing the assumption of standard bond lengths and bond angles through the use of the CHARMM potential, and the hydrophobic folding energies of Eisenberg and McLachlan were calculated. Each conformation is described in terms of the RMSD from the native, hydrogen-bonding structure, solvent-accessible surface area, and the ratio of surfaces corresponding to nonpolar and polar residues. The unconstrained search finds conformations that are different from the native, sometimes substantially, and in addition, have lower conformational energies than the native. The origin of deviations is different for each of the three peptides, but in all examples the refined x-ray structures have lower energies than the calculated incorrect folds when (1) the assumption of standard bond lengths and bond angles is relaxed; (2) a small and constant effective dielectric permittivity (epsilon < 10) is used; and (3) the hydrophobic folding energy is incorporated into the potential.

Periodic properties of proton conformational shifts in isolated protein helices. An experimental study

In this work, the helix-forming residues in fragments of several proteins (ribonuclease, thermolysin, tendamistat and angiogenin) were identified by NOE and the helix proton shifts were measured as delta changes associated with helix-population increments driven by trifluoroethanol addition. When estimated in this way, a regular pattern of helix conformational shifts was clearly seen in the delta delta versus sequence profiles of all the peptides studied. The helix periodicity of the H alpha and H beta resonances was especially clear, an observation that earlier statistical studies of protein delta values failed to predict. Amide protons showed the largest helix shifts, but with a less-sharply defined periodic character. Aromatic residues considerably distorted the periodicity of the helix amide shifts in some peptides, as evidenced by the delta shifts of a RNase A fragment 1-15 analog in which the two aromatic residues were replaced by Ala. The relationship between helix periodicity and peptide amphiphatic character is discussed.

The folding of an enzyme. VI. The folding pathway of barnase: comparison with theoretical models

The sequence of events in the refolding pathway of barnase has been analysed to search for general principles in protein folding. There appears to be a correlation between burying hydrophobic surface area and early folding events. All the regions that fold early interact extensively with the beta-sheet. These interactions involve predominantly hydrophobic interactions and the burial of very extensive hydrophobic areas in which multiple, close, hydrophobic-hydrophobic contacts are established around a central group of aliphatic residues. There is no burial of hydrophilic residues in these regions; those that are partly screened from the solvent make hydrogen bonds. All the regions or interactions that are made late in the folding pathway do not make extensive contacts with the beta-sheet. Their buried hydrophobic regions lack a central hydrophobic residue or residues around which other hydrophobic residues pack. Further, in some of these regions there is an extensive burial of hydrophilic residues. The results are consistent with one of the earlier events in protein folding being the local formation of native-like secondary structure elements driven by local hydrophobic surface burial. A possible candidate for an initiation site is a beta-hairpin between beta-strands 3 and 4 that is conserved in the microbial ribonuclease family. A comparison of structures in this family shows that those regions that can be superimposed, or have sequence homology, correspond to elements of structure that are formed and interact with each other early in the folding pathway, suggesting that some of these residues could be involved in directing the folding process. The data on barnase combined with results from other laboratories suggest the following tentative conclusions for the refolding of small monomeric proteins. (1) The refolding pathway is, at least in part, sequential and of compulsory order. (2) Secondary structure formation is driven by local hydrophobic surface burial and precedes the formation of most tertiary interactions. These elements are then stabilized and sometimes elongated by tertiary interactions. It is plausible that there are stop signals encoded in the linear sequence that prevent the elongation of isolated secondary structure elements in solution to a larger extent than is found in the folded protein. (3) Many tertiary interactions are not very constrained in the intermediate but become more and more defined as the hydrophobic cores consolidate, loop structures form and the configuration of surface residues takes place. The interactions between different elements of secondary structure are the last ones to be consolidated while the interactions within the secondary structure elements are consolidated earlier.(ABSTRACT TRUNCATED AT 400 WORDS)

Continuum electrostatics of the C-peptide: anatomy of the problem

A computational study of the role of all ionizable groups of the C-peptide in its helix-coil transition is performed within the framework of continuum electrostatics. The method employed in our computations involves a numeric solution of the Poisson equation with the Boundary Element Method. Our calculations correctly predict the experimentally observed trends in the helix-coil equilibrium of the C-peptide, and suggest that the mechanisms involved are more complex than usually presumed in the literature. Our results suggest that electrostatic interactions in the unfolded conformation are often more important than in the helix, total electrostatic contribution to the helix-coil transition due to the side chains of the C-peptide destabilizes the helix, changes in the helix stability produced by the changes in the ionization state of the side chains are dominated by side chain effects, the effect of the helix dipole on the energetics of the helix-coil transition of the C-peptide is either minor or similar to other contributions in magnitude; while the formation of a salt bridge is electrostatically favorable, formation of the hydrogen bond between a charged and a polar side chains is not. Factors limiting the accuracy of the computations are discussed.

The homologous angiogenin and ribonuclease N-terminal fragments fold into very similar helices when isolated

The solution structure of the N-terminal hexadecapeptide of human angiogenin, a protein of unknown tertiary structure, has been precisely delineated by the combined use of CD, NOE and secondary shift data. A helix that starts just after Ser 3 and ends at Asp 14 was stabilized in 30% trifluoroethanol. This helix is strikingly similar in origin and length to the one formed by its homologous, the S-peptide of Ribonuclease (conformationally reexamined here), despite their quite different sequences (only four conserved residues). These results support the idea that individual start and stop signals indeed govern the location and size of natural isolated helices.

Tendamistat (12-26) fragment. NMR characterization of isolated beta-turn folding intermediates

In order to determine whether regions of a protein that are turns in the native structure are able to maintain such a structure when isolated, we have studied the conformational properties of various peptide fragments corresponding to the 12-26-peptide region of the alpha-amylase inhibitor tendamistat, by NMR. Amide solvent accessibility, NOE spectroscopy (NOESY) and rotating-frame NOE spectroscopy (ROESY) data strongly support the conclusion that the 12-26 and 15-23 peptides adopt in aqueous solution, a set of turn-like structures located around the central region of their corresponding polypeptidic chains, the same region where a beta turn exists in the native protein. Such a set of structures are destabilized when one residue located within the native beta turn of the 15-23 peptide is modified Trp18----Ser. Our results indicate that the tendency to bend in a predetermined region of a protein chain seems to exist from the very beginning of the folding process and therefore it could drive the folding instead of being a consequence of the tertiary assembly of the protein.

The Glu 2- ... Arg 10+ side-chain interaction in the C-peptide helix of ribonuclease A

Previous studies have identified Lys 1, Glu 2, and His 12 as the charged residues responsible for the pH-dependent stability of the helix formed by the isolated C-peptide (residues 1-13 of ribonuclease A). Here we examine whether the helix-stabilizing behavior of Glu 2- results from a Glu 2- ... Arg 10+ interaction, which is known to be present in the crystal structure of ribonuclease A. The general approach is to measure the helix content of C-peptide analogs as a function of three variables: pH (titration of ionizing groups), amino acid identity (substitution test), and NaCl concentration (ion screening test). In order to interpret the results of residue replacement, several factors in addition to the putative Glu 2- ... Arg 10+ interaction have been studied: intrinsic helix-forming tendencies of amino acids; interactions of charged residues with the alpha-helix macrodipole; and helix-lengthening effects. The results provide strong evidence that the Glu 2- ... Arg 10+ interaction is linked to helix formation and contributes to the stability of the isolated C-peptide helix. NMR evidence supports these conclusions and suggests that this interaction also acts as the N-terminal helix stop signal. The implications of this work for protein folding and stability are discussed.

Folding and activity of hybrid sequence, disulfide-stabilized peptides

Peptides have been synthesized that have hybrid sequences, partially derived from the bee venom peptide apamin and partially from the S peptide of ribonuclease A. The hybrid peptides were demonstrated by NMR spectroscopy to fold, forming the same disulfides and basic three-dimensional structure as native apamin, containing a beta-turn and an alpha-helix. These hybrids were active in complementing S protein, reactivating nuclease activity. In addition, the hybrid peptide was effective in inducing antibodies that cross-react with the RNase, without conjugation to a carrier protein. The stability of the folded structure of this peptide suggests that it should be possible to elicit antibodies that will react not only with a specific sequence, but also with a specific secondary structure. Hybrid sequence peptides also provide opportunities to study separately nucleation and propagation steps in formation of secondary structure. We show that in S peptide the alpha-helix does not end abruptly but rather terminates gradually over four or five residues. In general, these hybrid sequence peptides, which fold predictably because of disulfide bond formation, can provide opportunities for examining structure-function relationships for many biologically active sequences.

Solution structure of the isolated ribonuclease C-terminal 112-124 fragment

The conformational properties of the ribonuclease C-terminal 112-124 fragment have been studied by CD and 1H- and 13C-NMR in an attempt to determine whether native secondary structure elements other than alpha-helices have stability enough to be detected when isolated in aqueous solution. Only sequential alpha N and intraresidue NOE cross-peaks are observed in the NOESY spectra, a fact which points towards an essentially extended polypeptidic chain. Observed spectral variations with temperature, pH and urea addition allowed the identification of two non-random regions within the chain. The first one is located within residues 119-121, the same region where a native salt bridge (H119...D121) exists in the native protein, and the stability of that structure is affected by the protonation state of carboxylate groups. The second one involves the S123 and V124 residues at the C-terminal end. No signs of the native 112-115 beta-turn were detected which suggests that, in contrast to alpha-helices, long range interactions may be needed to stabilize these secondary structure elements.

Unusually stable helix formation in short alanine-based peptides

Short, 16-residue, alanine-based peptides show stable alpha-helix formation in H2O. This result is surprising when contrasted with the classical view that regards the alpha-helix as a marginally stable structure in H2O and considers short helices unstable. The alanine-based peptides are solubilized by insertion of three or more residues of a single charge type, lysine (+) or glutamic acid (-). The results cannot be explained by helix stabilization resulting from concentration-dependent association or by the interaction of charged residues with the helix dipole. Our results are not predicted by the parameters for alanine and lysine that have been determined by the "host-guest" method: these parameters predict that a 16-residue peptide should not show measurable alpha-helix formation. Analysis of the role of the hydrophobic interaction in alpha-helix formation [Richards, F.M. & Richmond, T. (1978) in Molecular Interactions and Activity in Proteins, Ciba Foundation Symposium 60, ed. Wolstenholme, G.E. (Excepta Medica Amsterdam), pp. 23-25] does not show an unusually strong hydrophobic interaction in a helical block of alanine residues. The likely explanation for our results is, therefore, that individual alanine residues have a high helical potential. It is not yet known whether any other amino acids show this property, and the origin of this property is also unknown.

Conformational properties of the isolated 1-23 fragment of human hemoglobin alpha-chain

With the purpose of establishing whether, as a general rule, regions of a protein chain that are helical in the native structure maintain, at least partially, the same helical structure when isolated in solution, we have prepared the 1-23 fragment of human hemoglobin alpha-chain, and studied its conformational properties in aqueous solution by CD and 1H-NMR. From the analysis of CD and NMR spectral changes with temperature, salt and addition of trifluoroethanol (TFE) it can be concluded that the 1-23 peptide forms a measurable population (18% at 22 degrees C (pH 5.6) TFE/H2O, 30:70 (v/v)) of an alpha-helix structure that spans the same residues that are helical in the native protein (namely, 6 to 17). These results, taken together with similar ones obtained previously in the 1-19, 21-42 and 50-61 RNAase fragments, support the idea that no helices other than the native ones are actually formed in solution by protein fragments. This implies that the final helical structure of a protein is present from the very beginning of the folding process, and also that such elements of secondary structure can act as primary nucleation centers.

Local interactions favor the native 8-residue disulfide loop in the oxidation of a fragment corresponding to the sequence Ser-50-Met-79 derived from bovine pancreatic ribonuclease A

A 30-residue peptide was obtained from ribonuclease A by chemical cleavage with cyanogen bromide, subsequent sulfitolysis with concomitant S-sulfonation, and finally enzymatic cleavage with Staphylococcus aureus protease. The peptide was converted to the free thiol form by reductive cleavage of the S-sulfo-protecting groups with D,L-dithiothreitol. This peptide consisted of residues 50-79 of the native sequence of ribonuclease A, with the exception that methionine-79 had been converted to homoserine. Included in this sequence are residues cysteine-65 and cysteine-72, which form a disulfide bond in the native enzyme, as well as cysteine-58. This molecule may form one of three possible intramolecular disulfide bonds upon thiol oxidation, viz. one loop of 15 and 2 of 8 residues each. These isomeric peptides were prepared by oxidation with cystamine, 2-aminoethanethiolation of residual thiols, and fractionation by reverse-phase high-performance liquid chromatography. Disulfide pairings were established by mapping the tryptic fragments and confirming their composition by amino acid analysis. After protracted incubation under oxidizing conditions at 25.0 degrees C and pH 8.0, the 26-member ring incorporating the native disulfide bond between residues 65 and 72 is the dominant product. Assuming that equilibrium is established, we infer that local interactions in the sequence of ribonuclease A significantly stabilize the native 8-residue disulfide loop with respect to the non-native 8-residue loop (delta G degree = -1.1 +/- 0.1 kcal mole-1). The implications of this observation for the oxidative folding of the intact protein are discussed.

1H-NMR assignment and folding of the isolated ribonuclease 21-42 fragment

We show in this paper that the isolated bovine ribonuclease 21-42 fragment is able to adopt in water solution a measurable population (14% at 22 degrees C, pH 5.4) of a native-like alpha-helical structure. Strong support for this conclusion is given by the analysis of CD data and 1H chemical shift variations with the temperature and the addition of stabilizing (trifluoroethanol) and denaturing (urea) agents. This results gives experimental support to the idea that native isolated secondary structure elements (at least alpha helices) are, as a rule, partially stable in solution and therefore they can act as independent protein-folding nucleation centers.

1H NMR and CD evidence of the folding of the isolated ribonuclease 50-61 fragment

In our search for potential folding intermediates we have prepared and characterized the fragment of RNase A corresponding to residues 50-61. Proton chemical shift variations with temperature, addition of stabilizing (TFE) or denaturing agents (urea) provide a strong experimental basis for concluding that in aqueous solution this RNase fragment forms an alpha-helix structure similar to that in the intact RNase A crystal. This conclusion lends strong support to the idea that elements of secondary structure (mainly alpha-helices) can be formed in the absence of tertiary interactions and act as nucleation centers in the protein folding process.

1H-n.m.r. study of the folding of ribonuclease 12-(beta-(3-pyridyl)-L-Ala) S-peptide (1-14)

The 1H-n.m.r. spectra (360 MHz) of 12-(beta-(3-pyridyl)-L-Ala) ribonuclease S-peptide (1-14), a tetradecapeptide incorporating (beta-3-pyridyl-L-Ala) instead of His at position 12, have been assigned. The shift vs. temperature dependence has been analyzed at three different pD's in terms of a two-state helix (3-13) in equilibrium coil equilibrium, and the corresponding values for the thermodynamic quantities delta H degrees and delta S degrees determined. Helix populations at 0 degrees C have been measured as a function of pD, showing their dependence on two apparent pKa's at approximately 3.3 and 5.5, with a maximum at pD approximately 4.2. All the obtained results show that the new peptide has very similar folding properties to those shown by S-peptide and particularly to those of C-peptide. The 3-13 helix formed is stabilized by two interactions: a salt-bridge Glu 2-...Arg 10+ and a partial stacking between the aromatic rings of residues Phe 8 and His 12. Calculations involving ring current shifts and potential energies validate the possible existence of this latter interaction, which must present a local geometry defined by chi 81 180 degrees, chi 82 100 degrees, chi 121-60 and chi 122 80.

Conformational study of two synthetic peptides with sequence analogies to the N-terminal fragment of RNase A

The conformational properties of two synthetic model peptides, AEAAHAAEAAHMG (PA) and AEAAHAFEAAHMG (PF), have been studied using CD and 1H-NMR methods. In both peptides, glutamate and histidine residues are situated in such a way that two salt bridges between Glu- (i) and His+ (i + 3) can be formed. A salt bridge of this type (Glu- 9-His+ 12) was postulated previously to stabilize, to a great extent, the alpha-helical conformation of isolated N-terminal fragments of RNase A: C-peptide and S-peptide (A. Bierzyński, P.S. Kim and R.L. Baldwin, Proc. Natl. Acad. Sci. U.S.A. 79 (1982) 2470). Although in both PA and PF salt bridges between glutamates and histidines are formed, as demonstrated by the pH-titration curves of the glutamate gamma-proton signals, no traces of helical conformation have been detected. Evidently, the Glu- (i)-His+ (i + 3) salt bridges do not stabilize the alpha-helical conformation. A comparative analysis of PA and PF NMR spectra provides strong evidence that the phenylalanyl ring in PF interacts not only with the hydrophobic methyl groups of almost all alanine residues but also with the histidine rings and the glutamate side chains in their protonated as well as deprotonated forms. Similar interactions, involving Phe 8, can be expected in the N-terminal fragments of RNase and should be taken into account as an important factor determining the conformational properties of C- and S-peptides.

The design and production of semisynthetic ribonucleases with increased thermostability by incorporation of S-peptide analogues with enhanced helical stability

Recent work has shown that, with synthetic analogues of C-peptide (residues 1-13 of ribonuclease A), the stability of the peptide helix in H2O depends strongly on the charge on the N-terminal residue. We have asked whether, in semisynthetic ribonuclease S reconstituted from S-protein plus an analogue of S-peptide (1-15), the stability of the peptide helix is correlated with the Tm of the reconstituted ribonuclease S. Six peptides have been made, which contain Glu9----Leu, a blocked alpha-COO- group (-CONH2), and either Gln11 or Glu11. The N-terminal residue has been varied; its charge varies from +2 (Lys) to -1 (succinyl-Ala). We have measured the stability of the peptide helix, the affinity of the peptide for S-protein (by C.D. titration), and the thermal stability of the reconstituted ribonuclease S. All six peptide analogues show strongly enhanced helix formation compared to either S-peptide (1-15) or (1-19), and the helix content increases as the charge on the N-terminal residue changes from +2 to -1. All six peptides show increased affinity for S-protein compared to S-peptide (1-19), and all six reconstituted ribonucleases S show an increase in Tm compared to the protein with S-peptide (1-19). The Tm increases as the charge on residue 1 changes from +2 to -1. The largest increment in Tm is 6 degrees. The results suggest that the stability of a protein can be increased by enhancing the stability of its secondary structure.

Assignment and conformation of neurotensin in aqueous solution by 1H NMR

A complete assignment of exchangeable and unexchangeable proton resonances of neurotensin 1-13 in aqueous solution has been carried out with the help of its 1-8 and 8-13 fragments. To detect formation of a secondary structure, the effects of peptide fragmentation, temperature decrease, pH changes and addition of denaturing agents on the neurotensin 1H NMR spectrum were investigated. The small changes observed in all cases support the conclusion that neurotensin exists mainly as a flexible random coiled polypeptidic chain in aqueous solution in agreement with previous CD studies.

Effects of denaturants on amide proton exchange rates: a test for structure in protein fragments and folding intermediates

A method for detecting structure in marginally stable forms of a protein is described. The principle is to measure amide proton exchange rates in the absence and presence of varying concentrations of a denaturant. Unfolding of structure by the denaturant is reflected by an acceleration of amide proton exchange rates, after correction for the effects of the denaturant on the intrinsic rate of exchange. This exchange-rate test for structure makes no assumptions about the rate of exchange in the unfolded state. The effects of 0-8 M urea and 0-6 M guanidinium chloride (GdmCl) on acid- and base-catalyzed exchange from model compounds have been calibrated. GdmCl does not appear to be well-suited for use in the exchange-rate test; model compound studies show that the effects of GdmCl on intrinsic exchange rates are complicated. In contrast, the effects of urea are a more uniform function of denaturant concentration. Urea increases acid-catalyzed, and decreases base-catalyzed, rates in model compounds. The exchange-rate test is used here to study structure formation in the S-protein (residues 21-124 of ribonuclease A). In conditions where an equilibrium folding intermediate of S-protein (I3) is known to be populated (pH 1.7, 0 degree C), the exchange-rate test for structure is positive. At higher temperatures (greater than 32 degrees C) I3 is unfolded, but circular dichroism data suggest that residual structure remains [Labhardt, A. M. (1982) J. Mol. Biol. 157, 357-371].(ABSTRACT TRUNCATED AT 250 WORDS)

Nature of the charged-group effect on the stability of the C-peptide helix

The residues responsible for the pH-dependent stability of the helix formed by the isolated C-peptide (residues 1-13 of ribonuclease A) have been identified by chemical synthesis of analogues and measurement of their helix-forming properties. Each of the residues ionizing between pH 2 and pH 8 has been replaced separately by an uncharged residue. Protonation of Glu-2- is responsible for the sharp decrease in helix stability between pH 5 and pH 2, and deprotonation of His-12+ causes a similar decrease between pH 5 and pH 8. Glu-9- is not needed for helix stability. The results cannot be explained by the Zimm-Bragg model and host-guest data for alpha-helix formation, which predict that the stability of the C-peptide helix should increase when Glu-2- is protonated or when His-12+ is deprotonated. Moreover, histidine+ is a strong helix-breaker in host-guest studies. In proteins, acidic and basic residues tend to occur at opposite ends of alpha-helices: acidic residues occur preferentially near the NH2-terminal end and basic residues near the COOH-terminal end. A possible explanation, based on a helix dipole model, has been given [Blagdon, D. E. & Goodman, M. (1975) Biopolymers 14, 241-245]. Our results are consistent with the helix dipole model and they support the suggestion that the distribution of charged residues in protein helices reflects the helix-stabilizing propensity of those residues. Because Glu-9 is not needed for helix stability, a possible Glu-9-...His-12+ salt bridge does not contribute significantly to helix stability. The role of a possible Glu-2-...Arg-10+ salt bridge has not yet been evaluated. A charged-group effect on alpha-helix stability in water has also been observed in a different peptide system [Ihara, S., Ooi, T. & Takahashi, S. (1982) Biopolymers 21, 131-145]: block copolymers containing (Ala)20 and (Glu)20 show partial helix formation at low temperatures, pH 7.5, where the glutamic acid residues are ionized. (Glu)20(Ala)20Phe forms a helix that is markedly more stable than (Ala)20(Glu)20Phe. The results are consistent with a helix dipole model.

Synthesis and properties of an all-D model ribonuclease S-peptide

In order to examine the effect of a defined enantiomeric sequence on protein structure, the all-D model ribonuclease S-peptide, H-Ala-Glu-Ala4-Lys-Phe-Ala-Arg-Ala-His-Met-Ala2-OH, has been synthesized by the solid phase method. The all-L peptide has been synthesized previously and shown to possess 36% of ribonuclease S activity when added to ribonuclease S-protein (Komoriya, A. & Chaiken, I.M. (1982) J. Biol. Chem 257, 2599-2604). The synthetic D-peptide was purified by gel filtration and semipreparative reverse phase HPLC. Amino acid composition of the synthetic peptide was in agreement with theory and gas chromatographic analysis showed that no significant racemization had occurred during synthesis. Circular dichroism (CD) studies of the D-peptide showed a peak of positive ellipticity in the 220-230 nm region, whereas a negative ellipticity peak for the L-peptide was observed. The effects of temperature and trifluoroethanol on the far-ultraviolet CD spectra of D- and L-peptides were similar but of opposite sign, confirming the expectation that the D-peptide has the propensity to form an alpha-helical structure which is enantiomeric with respect to that formed by the L-peptide. In the presence of S-protein, the L-peptide showed hydrolytic activity against the substrate cytidine-2':3'-monophosphate, whereas the D-peptide was inactive. Addition of the D-peptide to mixtures of L-peptide and S-protein did not lead to inhibition of enzymatic activity. These results indicate lack of binding of D-peptide to S-protein to produce either an active or inactive species.

NH resonances of Ribonuclease S-peptide in aqueous solution. Low temperature n.m.r. study

A detailed study of the NH resonances of Ribonuclease-S-peptide (1-19 N-terminal fragment of Ribonuclease A) has been carried out in H2O, pH 3.0, in the temperature range 1-31 degrees, and ionic strength 0-1 M. Individual assignments of all NH amide signals have been achieved by means of extensive double resonance experiments. The folding of S-peptide at low temperature has been monitored by examination of the several NH resonance parameters: first, the nonlinearity of chemical shift vs. temperature plots; second, the selective broadening observed for signals assigned to residues 3-13; and third, the decrease of 3JHNCH coupling constants belonging to this region of the polypeptide chain. All these results are in agreement with the formation of a folded structure at low temperature, which is similar to the one found for the S-peptide in the RNase S crystal.

On the fundamental role of the Glu 2- ... Arg 10+ salt bridge in the folding of isolated ribonuclease A S-peptide

The fundamental role of the Glu 2- ... Arg 10+ salt bridge in the folding of isolated S-peptide (1-19 N-terminal fragment of Ribonuclease A) is demonstrated from the comparison of the helix contents, at 0 degrees C, of S-peptide and related peptides. Helix contents have been determined from the analysis of proton chemical shift vs. temperature curves. The observed data can be accounted for by assuming that two side-chain interactions contribute to stabilize the 3-13 helix of S-peptide, the salt bridges Glu 2- ... Arg 10+ and Glu 9-... His 12+, the former being more effective. The salt bridge Glu 9- ... Arg 10+ turns to a weaker interaction, a hydrogen bond Glu 2 (C delta = 0) ... Arg 10+, on protonation or esterification of the Glu 2 carboxylate.

Local structure involving histidine-12 in reduced S-sulfonated ribonuclease A detected by proton NMR spectroscopy under folding conditions

The C epsilon H proton resonance of His-12 of reduced cysteine S-sulfonated bovine pancreatic ribonuclease A exhibits a nonlinear temperature dependence of the chemical shift in its 1H-NMR spectrum at an apparent pH of 3.0. At temperatures below ca. 35 degrees C, the temperature dependence of the chemical shift of the His-12 C epsilon H resonance is opposite in sign to those of His-48, His-105, and His-119. At temperatures above ca. 35 degrees C, the temperature dependence of the chemical shift of the His-12 C epsilon H resonance is similar to those of the other three His C epsilon H resonances. These data indicate the existence of an equilibrium between locally ordered and locally disordered environments of His-12 in the sulfonated protein at temperatures below ca. 35 degrees C. The ordered and disordered conformations interconvert at a rate that is fast relative to the 1H-NMR chemical shift time scale--i.e., the locally ordered structure has a lifetime of much less than 7 msec. These results demonstrate that short- and medium-range interactions can define short-lived local structures under conditions of temperature and solution composition at which the native protein structure is stable. Furthermore, they demonstrate the utility of reduced derivatives of disulfide-containing proteins as model systems for the identification of local structures that may play a role as early-forming chain-folding initiation structures.

A helix stop signal in the isolated S-peptide of ribonuclease A

The isolated S-peptide (residues 1-20 of ribonuclease A) is known to show partial alpha-helix formation in aqueous solutions at low temperatures. We show here that the helix is limited to certain residues, including ones that are helical in the intact protein, and that a functional helix termination signal exists in the isolated peptide.