Control of nucleation in microtubule self-assembly

Back to the tubule: microtubule dynamics in Parkinson's disease

Cytoskeletal homeostasis is essential for the development, survival and maintenance of an efficient nervous system. Microtubules are highly dynamic polymers important for neuronal growth, morphology, migration and polarity. In cooperation with several classes of binding proteins, microtubules regulate long-distance intracellular cargo trafficking along axons and dendrites. The importance of a delicate interplay between cytoskeletal components is reflected in several human neurodegenerative disorders linked to abnormal microtubule dynamics, including Parkinson’s disease (PD). Mounting evidence now suggests PD pathogenesis might be underlined by early cytoskeletal dysfunction. Advances in genetics have identified PD-associated mutations and variants in genes encoding various proteins affecting microtubule function including the microtubule-associated protein tau. In this review, we highlight the role of microtubules, their major posttranslational modifications and microtubule associated proteins in neuronal function. We then present key evidence on the contribution of microtubule dysfunction to PD. Finally, we discuss how regulation of microtubule dynamics with microtubule-targeting agents and deacetylase inhibitors represents a promising strategy for innovative therapeutic development.

Estimating the microtubule GTP cap size in vivo

Microtubules (MTs) polymerize via net addition of GTP-tubulin subunits to the MT plus end, which subsequently hydrolyze to GDP-tubulin in the MT lattice. Relatively stable GTP-tubulin subunits create a "GTP cap" at the growing MT plus end that suppresses catastrophe. To understand MT assembly regulation, we need to understand GTP hydrolysis reaction kinetics and the GTP cap size. In vitro, the GTP cap has been estimated to be as small as one layer (13 subunits) or as large as 100-200 subunits. GTP cap size estimates in vivo have not yet been reported. Using EB1-EGFP as a marker for GTP-tubulin in epithelial cells, we find on average (1) 270 EB1 dimers bound to growing MT plus ends, and (2) a GTP cap size of ∼750 tubulin subunits. Thus, in vivo, the GTP cap is far larger than previous estimates in vitro, and ∼60-fold larger than a single layer cap. We also find that the tail of a large GTP cap promotes MT rescue and suppresses shortening. We speculate that a large GTP cap provides a locally concentrated scaffold for tip-tracking proteins and confers persistence to assembly in the face of physical barriers such as the cell cortex.

New insights into microtubule elongation mechanisms

Microtubules are cytoskeletal structures in the cytoplasm of eukaryotic cells, and their highly dynamic properties are essential to perform a wide variety of vital functions in cells. Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin molecules. It has largely been assumed that only tubulin dimers can incorporate into microtubules, and that the chemical state of the nucleotide is crucial for the incorporation. Recent observations reveal that both tubulin dimers and oligomers can add to microtubule ends and that the chemical state of the nucleotide is not decisive for tubulin addition. Together with structural studies of tubulin, these results show tubulin assembly polymorphism, which could play a crucial role in microtubule-dependent cellular functions.

GDP-tubulin incorporation into growing microtubules modulates polymer stability

Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin dimers. The microtubule wall is composed of GDP-tubulin subunits, which are thought to come exclusively from the incorporation of GTP-tubulin complexes at microtubule ends followed by GTP hydrolysis within the polymer. The possibility of a direct GDP-tubulin incorporation into growing polymers is regarded as hardly compatible with recent structural data. Here, we have examined GTP-tubulin and GDP-tubulin incorporation into polymerizing microtubules using a minimal assembly system comprised of nucleotide-bound tubulin dimers, in the absence of free nucleotide. We find that GDP-tubulin complexes can efficiently co-polymerize with GTP-tubulin complexes during microtubule assembly. GDP-tubulin incorporation into microtubules occurs with similar efficiency during bulk microtubule assembly as during microtubule growth from seeds or centrosomes. Microtubules formed from GTP-tubulin/GDP-tubulin mixtures display altered microtubule dynamics, in particular a decreased shrinkage rate, apparently due to intrinsic modifications of the polymer disassembly properties. Thus, although microtubules polymerized from GTP-tubulin/GDP-tubulin mixtures or from homogeneous GTP-tubulin solutions are both composed of GDP-tubulin subunits, they have different dynamic properties, and this may reveal a novel form of microtubule "structural plasticity."

Identification of MINUS, a small polypeptide that functions as a microtubule nucleation suppressor

In eukaryotic cells, tubulin polymerization must be regulated precisely during cell division and differentiation. To identify new mechanisms involved in cellular microtubule formation, we isolated an activity that suppresses microtubule nucleation in vitro. The activity was due to a small acidic polypeptide of 4.7 kDa which we named MINUS (microtubule nucleation suppressor). MINUS inhibited tau- and taxol-mediated microtubule assembly in vitro and was inactivated by dephosphorylation. The protein was purified to homogeneity from cultured neural (PC12) cells and bovine brain. Microinjection of MINUS caused a transient loss of dynamic microtubules in Vero cells. The results suggest that MINUS acts with a novel mechanism on tubulin polymerization, thus regulating microtubule formation in living cells.

Influence of the guanine nucleotide phosphorylation state and of Mg2+ ions on the interaction of vinzolidine/tubulin 6 S: a fluorescence quenching study

The binding of the new vincaalkaloid vinzolidine to tubulin 6 S was investigated by using fluorescence quenching methods. The value of the apparent equilibrium binding constant was found to depend on the phosphorylation state of the guanine nucleotide bound to the tubulin exchangeable site (E-site), with Ka values of 4.9 X 10(4) and 8.19 X 10(4) M-1 for GTP- and GDP-tubulin, respectively. The effect of Mg2+ ions on this binding was more important on GTP-tubulin than on GDP-tubulin, and might be related to the existence of Mg2+ site(s) independent of the nucleotide.

Fast disassembly of microtubules induced by Mg2+ or Ca2+

The extent and rate of disassembly of microtubules induced by the addition of high concentrations of magnesium and calcium have been measured. At 25 degrees C, the rate constant for microtubule disassembly increases more than ten-fold on increasing [Mg2+] from 4.0 to 20 mM. The process is even more sensitive to [Ca2+], showing similar enhancement on increasing [Ca2+] from 0.5 to 8 mM. Electron microscopy indicates that the disassembly is an end-dependent process. Complete microtubule disassembly occurs at concentrations in excess of 10 and 2 mM for Mg2+ and Ca2+, respectively; this suggests the importance of binding to weak sites for both ions. The sensitivity to ionic composition explains the wide variations in the published values for k-, under varying conditions. The results indicate the potential range of microtubule disassembly rates which may be encountered under different conditions in vitro and in vivo. The highest values of k- (ca. 3000 s-1) would imply microtubule shortening rates in excess of 100 um per minute.

Dynamic properties of microtubules at steady state of polymerisation

Microtubules of tubulin dimer, polymerised in vitro to steady-state are shown to incorporate tubulin rapidly and extensively. The method involves adding [3H]-GTP to microtubules at steady state, and analysing for non-exchangeable [3H]-GDP in the presence of a GTP regenerating system. The rate and extent of this exchange process is dependent on the length distribution of the microtubules, and is notably faster with sheared microtubules. We simulate all these features of the exchange kinetics, together with the length redistributions occurring at steady state of polymerisation, using a simple model based on a limited number of kinetic parameters deriving from the measurements of microtubule dynamics by Horio and Hotani. The observed exchange kinetics thus provide a direct experimental criterion of 'dynamic instability' of microtubules at steady state of polymerisation.

Magnesium ion effects on microtubule nucleation in vitro

Much interest has currently been attached to the length distribution of microtubules polymerized in vitro and the related question of their possible 'dynamic instability'. Fundamental to this question is the mechanism of microtubule nucleation, which controls the rates of assembly and disassembly of microtubule protein in vitro. These kinetics are affected by a number of factors, including both the guanine nucleotides, GTP and GDP, and magnesium ion. Mg2+ exerts complex effects, as indicated by the existence of an optimal Mg2+ concentration for the maximum assembly rate of microtubule protein, and we investigate these effects in this report. At [Mg2+] greater than 0.5 mM, the characteristic lag-phase is substantially increased and the rate of assembly is greatly reduced without affecting the critical concentration significantly. We show that increasing [Mg2+] has two effects on the assembly process: nucleation is less efficient and the intrinsic rate constant for the elongation reaction is reduced. Lowering [Mg2+] (less than 0.5 mM) also inhibits nucleation. These effects of varying [Mg2+] can be explained predominantly in terms of enhanced stability of the microtubule-associated protein-containing oligomeric species present in the microtubule protein preparation. [Mg2+] is thus found to be a further important factor in microtubule nucleation, and hence, in determining length distributions in assembling microtubules.

Tubulin-nucleotide interactions. Effects of removal of exchangeable guanine nucleotide on protein conformation and microtubule assembly

The removal of tightly bound GDP from the exchangeable nucleotide-binding site of tubulin has been performed with alkaline phosphatase under conditions which essentially retain the assembly properties of the protein. When microtubule protein is treated with alkaline phosphatase, nucleotide is selectively removed from tubulin dimer rather than from MAP (microtubule-associated protein)-containing oligomeric species. Tubulin devoid of E-site (the exchangeable nucleotide-binding site of the tubulin dimer) nucleotide shows enhanced proteolytic susceptibility of the beta-subunit to thermolysin and decreased protein stability, consistent with nucleotide removal causing changes in protein tertiary structure. Pyrophosphate ion (3 mM) is able to promote formation of normal microtubules in the complete absence of GTP by incubation at 37 degrees C either with nucleotide-depleted microtubule protein or with nucleotide-depleted tubulin dimer to which MAPs have been added. The resulting microtubules contain up to 80% of tubulin lacking E-site nucleotide. In addition to its effects on nucleation, pyrophosphate competes weakly with GDP bound at the E-site. It is deduced that binding of pyrophosphate at a vacant E-site can promote microtubule assembly. The minimum structural requirement for ligands to induce tubulin assembly apparently involves charge neutralization at the E-site by bidentate ligation, which stabilizes protein domains in a favourable orientation for promoting the supramolecular protein-protein interactions involved in microtubule formation.