Dynamic light scattering study of the two-domain structure of Humicola insolens endoglucanase V

Interactions of endoglucanases with amorphous cellulose films resolved by neutron reflectometry and quartz crystal microbalance with dissipation monitoring

A study of the interaction of four endoglucanases with amorphous cellulose films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) is reported. The endoglucanases include a mesophilic fungal endoglucanase (Cel45A from H. insolens), a processive endoglucanase from a marine bacterium (Cel5H from S. degradans ), and two from thermophilic bacteria (Cel9A from A. acidocaldarius and Cel5A from T. maritima ). The use of amorphous cellulose is motivated by the promise of ionic liquid pretreatment as a second generation technology that disrupts the native crystalline structure of cellulose. The endoglucanases displayed highly diverse behavior. Cel45A and Cel5H, which possess carbohydrate-binding modules (CBMs), penetrated and digested within the bulk of the films to a far greater extent than Cel9A and Cel5A, which lack CBMs. While both Cel45A and Cel5H were active within the bulk of the films, striking differences were observed. With Cel45A, substantial film expansion and interfacial broadening were observed, whereas for Cel5H the film thickness decreased with little interfacial broadening. These results are consistent with Cel45A digesting within the interior of cellulose chains as a classic endoglucanase, and Cel5H digesting predominantly at chain ends consistent with its designation as a processive endoglucanase.

The O-glycosylated linker from the Trichoderma reesei Family 7 cellulase is a flexible, disordered protein

Fungi and bacteria secrete glycoprotein cocktails to deconstruct cellulose. Cellulose-degrading enzymes (cellulases) are often modular, with catalytic domains for cellulose hydrolysis and carbohydrate-binding modules connected by linkers rich in serine and threonine with O-glycosylation. Few studies have probed the role that the linker and O-glycans play in catalysis. Since different expression and growth conditions produce different glycosylation patterns that affect enzyme activity, the structure-function relationships that glycosylation imparts to linkers are relevant for understanding cellulase mechanisms. Here, the linker of the Trichoderma reesei Family 7 cellobiohydrolase (Cel7A) is examined by simulation. Our results suggest that the Cel7A linker is an intrinsically disordered protein with and without glycosylation. Contrary to the predominant view, the O-glycosylation does not change the stiffness of the linker, as measured by the relative fluctuations in the end-to-end distance; rather, it provides a 16 Å extension, thus expanding the operating range of Cel7A. We explain observations from previous biochemical experiments in the light of results obtained here, and compare the Cel7A linker with linkers from other cellulases with sequence-based tools to predict disorder. This preliminary screen indicates that linkers from Family 7 enzymes from other genera and other cellulases within T. reesei may not be as disordered, warranting further study.

Nanoscale structure of the cell wall protecting cellulose from enzyme attack

The cell wall structure protects cellulose from enzymatic attack and its successive fermentation. The nature of this protection consists in the very complex macroscopic and microscopic structure of cell wall that limits transport. Explaining this kind of protection is critical in future research to improve cell polymer availability for enzymatic attack. This research shows that the complete description of the cell wall topography at a nanoscale level allows a mechanistic understanding of cellulose protection. For this purpose, we used gas adsorption methods (CO(2) at 273 K and N(2) at 77 K) to detect mesoporosity (pore size of 1.5-30 nm diameter; MeS) and microporosity (pore size of 0.3-1.5 nm diameter; MiS) of the cell wall of five energy crops, i.e., giant cane, rivet wheat straw, miscanthus, proso millet, and sorghum. The presence of both hemicelluloses in the spaces between cellulose fibrils and the unhydrolyzable and highly cross-linked lignocarbohydrate complex (LCC) determines a microporous (80% pores having diameters below 0.8 nm) structure of the cell wall that prevents the cellulase enzymes from coming into direct contact with the cellulose, as their sizes exceed the cell wall pore size. On the other hand, the removal of the hemicelluloses and of the LCC complex determines a reduction of the MiS and an increase of the available surface for enzymatic attack, i.e., pores >5 nm diameter. This was confirmed by the good negative (r = -0.87, P < 0.001, n = 11) and positive (r = 0.78, P < 0.005, n = 11) correlations found for microporosity and mesoporosity (pores of diameters >5 nm), respectively, vs the glucose production, by cellulase enzyme attack in specific enzymatic hydrolysis tests performed on biomass samples.

Model cellulose films exposed to H. insolens glucoside hydrolase family 45 endo-cellulase--the effect of the carbohydrate-binding module

The effects of enzyme structure and activity on the degradation of model cellulose substrates were investigated by ellipsometry for the cellulase Humicola insolens GH45. The inactive variant D10N was found to adsorb at the cellulose surface but also to be incorporated into the cellulose films to an extent that depended on pH. For the native protein, the initial adsorption monitored for the inactive variant D10N was followed by enzyme-mediated degradation of the cellulose films. Again, a dependence on pH was found, such that higher pH resulted in slower enzymatic degradation. Removing the carbohydrate-binding module eliminated this pH dependence but also resulted in a decreased adsorption to the cellulose surface, and in a decreased net catalytic effect.

Enzymatic degradation of model cellulose films

Enzymatic degradation of model cellulose films prepared by a spin-coating technique was investigated by ellipsometry. The cellulose films were prior to degradation characterized by ellipsometry, contact angle measurements, ESCA (electron spectroscopy for chemical analysis) and AFM (atomic force microscopy). At enzyme addition to preformed cellulose films an initial adsorption was observed, which was followed by a total interfacial mass decrease due to enzymatic degradation of the cellulose films. The degradation rate was found to be constant during an extended time of hours, whereafter the degradation leveled off. In parallel to the decreased interfacial mass, the cellulose degradation resulted in a thinner and more dilute interfacial film. At long degradation times, however, there was an expansion of the cellulose film. The enzyme concentration affected the degradation rate significantly, with a faster degradation at a higher enzyme concentration. The effects of pH, temperature, ionic strength and stirring rate in the cuvette were also investigated.

Dimension, shape, and conformational flexibility of a two domain fungal cellulase in solution probed by small angle X-ray scattering

Cellulase Cel45 from Humicola insolens has a modular structure with a catalytic module and a cellulose-binding module (CBM) separated by a 36 amino acid, glycosylated, linker peptide. The solution conformation of the entire two domain Cel45 protein as well as the effect of the length and flexibility of the linker on the spatial arrangement of the constitutive modules were studied by small angle x-ray scattering combined with the known three-dimensional structure of the individual modules. The measured dimensions of the enzyme show that the linker exhibits an extended conformation leading to a maximum extension between the two centers of mass of each module corresponding to about four cellobiose units on a cellulose chain. The glycosylation of the linker is the key factor defining its extended conformation, and a five proline stretch mutation on the linker was found to confer a higher rigidity to the enzyme. Our study shows that the respective positioning of the catalytic module and the CBM onto the insoluble substrate is most likely influenced by the linker structure and flexibility. Our results are consistent with a model where cellulases can move on the surface of cellulose with a caterpillar-like displacement with free energy restrictions.

Chemoenzymatic synthesis of a bifunctionalized cellohexaoside as a specific substrate for the sensitive assay of cellulase by fluorescence quenching

A new bifunctionalized cellohexaose derivative was synthesized as a specific substrate for continuous assay of cellulases by resonance energy transfer. This cellohexaoside has a naphthalene moiety (EDANS) as a fluorescent energy donor at the reducing end and a 4-(4'-dimethylaminobenzeneazo)-benzene derivative as an acceptor chromophore at the non-reducing end. The key steps for the preparation of the target molecule involved transglycosylation reactions of cellobiosyl and cellotetraosyl fluoride donors onto cellobiosyl acceptors catalysed by the E197A mutant of cellulase Cel7B from Humicola insolens. Upon digestion with various cellulases, the energy transfer was disrupted and an increase of fluorescence was observed.

Thermostability of endo-1,4-beta-xylanase II from Trichoderma reesei studied by electrospray ionization Fourier-transform ion cyclotron resonance MS, hydrogen/deuterium-exchange reactions and dynamic light scattering

Endo-1,4-beta-xylanase II (XYNII) from Trichoderma reesei is a 21 kDa enzyme that catalyses the hydrolysis of xylan, the major plant hemicellulose. It has various applications in the paper, food and feed industries. Previous thermostability studies have revealed a significant decrease in enzymic activity of the protein at elevated temperatures in citrate buffer [Tenkanen, Puls and Poutanen (1992) Enzyme Microb. Technol. 14, 566-574]. Here, thermostability of XYNII was investigated using both conventional and nanoelectrospray ionization Fourier-transform ion cyclotron resonance MS and hydrogen/deuterium (H/D)-exchange reactions. In addition, dynamic light scattering (DLS) was used as a comparative method to observe possible changes in both tertiary and quaternary structures of the protein. We observed a significant irreversible conformational change and dimerization when the protein was exposed to heat. H/D exchange revealed two distinct monomeric protein populations in a narrow transition temperature region. The conformational change in both the water and buffered solutions occurred in the same temperature region where enzymic-activity loss had previously been observed. Approx. 10-30% of the protein was specifically dimerized when exposed to the heat treatment. However, adding methanol to the solution markedly lowered the transition temperature of conformational change as well as increased the dimerization up to 90%. DLS studies in water confirmed the change in conformation observed by electrospray ionization MS. We propose that the conformational change is responsible for the loss of enzymic activity at temperatures over 50 degrees C and that the functioning of the active site in the enzyme is unfeasible in a new, more labile solution conformation.

Thermophilic fungi: their physiology and enzymes

Thermophilic fungi are a small assemblage in mycota that have a minimum temperature of growth at or above 20 degrees C and a maximum temperature of growth extending up to 60 to 62 degrees C. As the only representatives of eukaryotic organisms that can grow at temperatures above 45 degrees C, the thermophilic fungi are valuable experimental systems for investigations of mechanisms that allow growth at moderately high temperature yet limit their growth beyond 60 to 62 degrees C. Although widespread in terrestrial habitats, they have remained underexplored compared to thermophilic species of eubacteria and archaea. However, thermophilic fungi are potential sources of enzymes with scientific and commercial interests. This review, for the first time, compiles information on the physiology and enzymes of thermophilic fungi. Thermophilic fungi can be grown in minimal media with metabolic rates and growth yields comparable to those of mesophilic fungi. Studies of their growth kinetics, respiration, mixed-substrate utilization, nutrient uptake, and protein breakdown rate have provided some basic information not only on thermophilic fungi but also on filamentous fungi in general. Some species have the ability to grow at ambient temperatures if cultures are initiated with germinated spores or mycelial inoculum or if a nutritionally rich medium is used. Thermophilic fungi have a powerful ability to degrade polysaccharide constituents of biomass. The properties of their enzymes show differences not only among species but also among strains of the same species. Their extracellular enzymes display temperature optima for activity that are close to or above the optimum temperature for the growth of organism and, in general, are more heat stable than those of the mesophilic fungi. Some extracellular enzymes from thermophilic fungi are being produced commercially, and a few others have commercial prospects. Genes of thermophilic fungi encoding lipase, protease, xylanase, and cellulase have been cloned and overexpressed in heterologous fungi, and pure crystalline proteins have been obtained for elucidation of the mechanisms of their intrinsic thermostability and catalysis. By contrast, the thermal stability of the few intracellular enzymes that have been purified is comparable to or, in some cases, lower than that of enzymes from the mesophilic fungi. Although rigorous data are lacking, it appears that eukaryotic thermophily involves several mechanisms of stabilization of enzymes or optimization of their activity, with different mechanisms operating for different enzymes.

A bifunctionalized fluorogenic tetrasaccharide as a substrate to study cellulases

Cellulases are usually classified as endoglucanases and cellobiohydrolases, but the heterogeneity of cellulose, in terms of particle size and crystallinity, has always represented a problem for the biochemical characterization of the enzymes. The synthesis of a bifunctionalized tetrasaccharide substrate suitable for measuring cellulase activity by resonance energy transfer is described. The substrate, which carries a 5-(2-aminoethylamino)-1-naphthalenesulfonate group on the non-reducing end and an indolethyl group on the reducing end, was prepared from beta-lactosyl fluoride and indolethyl beta-cellobioside by a chemoenzymatic approach using the transglycosylating activity of endoglucanase I of Humicola insolens as the key step. The bifunctionalized substrate has been used for the determination of the catalytic constants of H. insolens endoglucanase I and cellobiohydrolases I and II; this substrate could be of general use to measure the kinetic constants of cellulases able to act on oligomers of degree of polymerization <5. The data also provide evidence that cellobiohydrolases I and II are able to degrade an oligosaccharide substrate carrying non-carbohydrate substituents at both ends.