Chemometric classification of the solvent properties (selectivity) of commonly used gas chromatographic stationary phases

PEG-linked geminal dicationic ionic liquids as selective, high-stability gas chromatographic stationary phases

It is known that room-temperature ionic liquids (RTILs) have wide applicability in many scientific and technological fields. In this work, a series of three new dicationic room-temperature ionic liquids functionalized with poly(ethylene glycol) (PEG) linkages were synthesized and characterized via a linear solvation model. The application of these ILs as new GC stationary phases was studied. The efficient separation of several mixtures containing compounds of different polarities and 24 components of a flavor and fragrance mixture indicated comparable or higher resolving power for the new IL stationary phases compared to the commercial polysiloxane and poly(ethylene glycol)-based stationary phases. In addition, the selectivities of the IL stationary phases could be quite unique. The separation of a homologous alkane and alcohol mixture displayed the "dual nature" of these ionic liquids as GC stationary phases. The thermal stability study showed the column robustness up to 350 degrees C. The high separation power, unique selectivity, high efficiency and high thermal stability of the new dicationic ionic liquids indicate that they may be applicable as a new type of robust GC stationary phase.

Chromatographic and spectroscopic methods for the determination of solvent properties of room temperature ionic liquids

Room temperature ionic liquids are novel solvents with favorable environmental and technical features. Synthetic routes to over 200 room temperature ionic liquids are known but for most ionic liquids physicochemical data are generally lacking or incomplete. Chromatographic and spectroscopic methods afford suitable tools for the study of solvation properties under conditions that approximate infinite dilution. Gas-liquid chromatography is suitable for the determination of gas-liquid partition coefficients and activity coefficients as well as thermodynamic constants derived from either of these parameters and their variation with temperature. The solvation parameter model can be used to define the contribution from individual intermolecular interactions to the gas-liquid partition coefficient. Application of chemometric procedures to a large database of system constants for ionic liquids indicates their unique solvent properties: low cohesion for ionic liquids with weakly associated ions compared with non-ionic liquids of similar polarity; greater hydrogen-bond basicity than typical polar non-ionic solvents; and a range of dipolarity/polarizability that encompasses the same range as occupied by the most polar non-ionic liquids. These properties can be crudely related to ion structures but further work is required to develop a comprehensive approach for the design of ionic liquids for specific applications. Data for liquid-liquid partition coefficients is scarce by comparison with gas-liquid partition coefficients. Preliminary studies indicate the possibility of using the solvation parameter model for interpretation of liquid-liquid partition coefficients determined by shake-flask procedures as well as the feasibility of using liquid-liquid chromatography for the convenient and rapid determination of liquid-liquid partition coefficients. Spectroscopic measurements of solvatochromic and fluorescent probe molecules in room temperature ionic liquids provide insights into solvent intermolecular interactions although interpretation of the different and generally uncorrelated "polarity" scales is sometimes ambiguous. All evidence points to the ionic liquids as a unique class of polar solvents suitable for technical development. In terms of designer solvents, however, further work is needed to fill the gaps in our knowledge of the relationship between ion structures and physicochemical properties.

Column selectivity from the perspective of the solvation parameter model

The solvation parameter model is a useful tool for delineating the contribution of defined intermolecular interactions to retention of neutral molecules in separation systems based on a solute equilibrium between a gas, liquid or fluid mobile phase and a liquid or solid stationary phase. The free energy for this process is decomposed into contributions for cavity formation and the set up of intermolecular interactions identified as dispersion, electron lone pair, dipole-type and hydrogen bonding. The relative contribution of these interactions is indicated by a series of system constants determined by the difference of the defined interaction in the two phases. The interpretation of these system constants as a function of experimental factors that affect retention in the chromatographic system provides the connection between relative retention (selectivity) and the control variables for the separation system. To aid in the understanding of these processes we perform an analysis of system constants for gas chromatography, liquid chromatography, supercritical fluid chromatography and micellar electrokinetic chromatography as a function of different experimental variables as a step towards gaining a theoretical understanding of selectivity optimization for method development.

Characterization of phosphorus-containing gas chromatographic stationary phases by linear solvation energy relationships

Linear solvation energy relationships allow the prediction of a variety of solubility interactions based on a set of descriptors found in the following equation: [equation: see text]. SP refers to an intrinsic thermodynamic property that can be found experimentally for a series of solutes. Phases containing phosphate, phosphite and phosphine functional groups were studied in this work. Coefficients obtained during this work, as well as those available for previously characterized phases, were correlated with molecular structural descriptors. When effects of non-phosphorus functional groups are estimated and subtracted out, hydrogen bond acceptor capability, a1, shows a positive trend when correlated with percent functional group. Correlation of the dipolarity/polarizability coefficient, s, with calculated atomic polarizability shows stationary phases group according to like functional groups. A similar correlation with dipole moment gives a trend of increasing dipole as s1 increases. Further quantitative structure-solubility relationship work is planned to better describe the contributions of inner shell and valence electrons to the chemical and physical properties of these compounds.

Selectivity assessment of popular stationary phases for open-tubular column gas chromatography

The solvation parameter model is used to study the influence of temperature and composition on the selectivity of nine poly(siloxane) and two poly(ethylene glycol) stationary phase chemistries for open-tubular column gas chromatography. A database of system constants for the temperature range 60-140 degrees C was constructed from literature values with additional results determined for HP-50+, DB-210, DB-1701, DB-225 and SP-2340 columns. The general contribution of monomer composition (methyl, phenyl, cyanopropyl, and trifluoropropyl substituents) on the capacity of poly(siloxane) stationary phases for dispersion, electron lone pair, dipole-type and hydrogen-bond interactions is described. The selectivity coverage of the open-tubular column stationary phases is compared with a larger database for packed column stationary phases at a reference temperature of 120 degrees C. The open-tubular column stationary phases provide reasonable coverage of the range of dipole-type and hydrogen-bond base interactions for non-ionic packed column stationary phases. Deficiencies are noted in the coverage of electron lone pair interactions. None of the open-tubular column stationary phases are hydrogen-bond acids. The system constants are shown to change approximately linearly with temperature over the range 60-140 degrees C. The intercepts and slopes of these plots are used to discuss the influence of temperature on stationary phase selectivity.

Selectivity equivalence of poly(ethylene glycol) stationary phases for gas chromatography

The solvation parameter model is used to study differences in selectivity for poly(ethylene glycol) stationary phases for packed column (Carbowax 20M) and fused-silica, open-tubular column (HP-20M, AT-Wax, HP-INNOWax and DB-FFAP) gas chromatography. All phases are dipolar, strongly hydrogen-bond basic with no hydrogen-bond acidity and of moderate cohesion. No two phases are exactly alike, however, and selectivity differences identified with cavity formation and dispersion interactions, n- and pi-electron pair interactions, dipole-type interactions and hydrogen-bond interactions are quantified by differences in the system constants at a fixed temperature where retention occurs solely by gas-liquid partitioning. The system constants vary linearly with temperature over the range 60-140 degrees C (except for n- and pi-electron pair interactions which are temperature invariant) facilitating a general comparison of the importance of temperature on selectivity differences for compared phases. From a mechanistic point of view it is demonstrated that selectivity differences can result from chemical differences between the poly(ethylene glycol) stationary phases and from differences in the relative contribution of interfacial adsorption to the retention mechanism. The latter depends on both system properties and solute characteristics.

Calculation of Abraham solute descriptors from McReynolds gas chromatographic retention data

Quantitative descriptors of solubility properties are useful in the investigation of a wide variety of chemical and biological phenomena. Several solutes which may be useful in such studies are not suitable because these values have not been previously determined experimentally. Several solute descriptors used in the linear solvation energy relationship developed by Abraham and co-workers have been calculated either algebraically or by multiple linear regression analysis. Values for those descriptors which have been calculated are reported and the methods of calculation of these descriptors are also discussed. It is shown that both methods of determination of missing solute descriptor values agree statistically with each other and that the values reported for the calculated descriptors correlate well with data previously reported for similar homologs.