Estimating flow-rates for sub- and supercritical fluid extractions with linear restrictors

Rapid and Green Separation of Mono- and Diesters of Monochloropropanediols by Ultrahigh Performance Supercritical Fluid Chromatography-Mass Spectrometry Using Neat Carbon Dioxide as a Mobile Phase

This study demonstrates the effect of column selectivity and density of supercritical carbon dioxide (SC-CO₂) on the separation of monochloropropanediol (MCPD) esters, known as food toxicants, using SC-CO₂ without addition of cosolvent in ultrahigh performance supercritical fluid chromatography-mass spectrometry (UHPSFC-MS). This study shows that over 20 2-monochloropropanediol (2-MCPD) and 3-monochloropropanediol (3-MCPD) mono- and diesters are separated on a 2-picolylamine column in less than 12 min. The presence and position of a hydroxyl group in the structure, the number of unsaturated bonds, and the acyl chain length play a significant role in the separation of MCPD esters. The flow rate, backpressure, and column oven temperature, which affect the density of the mobile phase, were shown to have a substantial impact on retention, efficiency, and selectivity. The developed method was successfully applied for the determination of MCPD esters in refined oils and showed a close to excellent green analysis score using the Analytical Eco-Scale.

A rapid method for the separation of vitamin D and its metabolites by ultra-high performance supercritical fluid chromatography-mass spectrometry

In this study, a new supercritical fluid chromatography-mass spectrometry (SFC-MS) method has been developed for the separation of nine vitamin D metabolites within less than eight minutes. This is the first study of analysis of vitamin D and its metabolites carried out by SFC-MS. Six columns of orthogonal selectivity were examined, and the best separation was obtained by using a 1-aminoanthracene (1-AA) column. The number and the position of hydroxyl groups in the structure of the studied compounds as well as the number of unsaturated bonds determine the physiochemical properties and, thus the separation of vitamin D metabolites that is achieved on this column. All D2 and the D3 forms were baseline separated with resolution values>1.5. The effects of pressure, temperature, flow rate and different gradient modes were studied. Electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) were compared in positive mode, both by direct infusion and after SFC separation. The results showed that the sensitivity in APCI(+) was higher than in ESI(+) using direct infusion. In contrast, the sensitivity in APCI(+) was 6-fold lower than in ESI(+) after SFC separation. The SFC-MS method was validated between 10 and 500ng/mL for all analytes with coefficient of determination (R(2))≥0.999 for all calibration curves. The limits of detection (LOD) were found to range between 0.39 and 5.98ng/mL for 24,25-dihydroxyvitamin D3 (24,25(OH)2D3) and 1-hydroxyvitamin D2 (1OHD2), respectively. To show its potential, the method was applied to human plasma samples from healthy individuals. Vitamin D3 (D3), 25-hydroxyvitamin D3 (25OHD3) and 24,25(OH)2D3 were determined in plasma samples and the concentrations were 6.6±3.0ng/mL, 23.8±9.2ng/mL and 5.4±2.7ng/mL, respectively.

Development of a supercritical fluid extractor coupled with a time-of-flight mass spectrometer for online detection of extracts

A combined apparatus of a supercritical CO2 extractor (SFE) and a time-of-flight mass spectrometer (TOF-MS) was developed aiming at the direct analysis of extracts. A fused-silica capillary acts as both a pressure restrictor and an effluent injection nozzle into the TOF-MS. The tip of the nozzle was narrowed by melting and abrasion so that a greater pressure drop occurred at the tip. In the TOF-MS chamber, differential pumping between the main and ionization chamber kept the pressure in the ionization chamber at around 10(-3) Pa when the SFE pressure was at 9.7 to 29.4 MPa. The TOF-MS performance, a mass resolution of 263 at m/z = 146, and a sensitivity of 1.6 ng (p-dichlorobenzene) were certified by direct injection of a standard organic solution. Online detection of SFE effluent containing naphthalene, p-dichlorobenzene, phenanthrene and pyrene were successfully performed by the TOF-MS only for 48000 ionization cycles corresponding to 7.5 s.

Routine analysis of hydrocarbons, PCB and PAH in marine sediments using supercritical CO2 extraction

Automated Supercritical Fluid Extraction (SFE), using CO2, was tested and optimised for routine analysis of hydrocarbons (THC), polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) in marine sediments. The aim of the exercise was to reduce the amount of solvents used and to reduce the manual handling time for each sample. The sediments contained elemental sulphur, which was removed during the extraction step using activated Cu. Similar recoveries and reproducibility where found for THC when conventional solvent extractions and SFE where compared. Modifying the CO2 with methanol was necessary to obtain extraction recoveries similar to conventional extraction methods for PCB and PAH.