Structure and inherent properties of the bacteriophage lambda head shell. I. Polyheads produced by two defective mutants in the major head protein

Insights into head-tailed viruses infecting extremely halophilic archaea

Extremophilic archaea, both hyperthermophiles and halophiles, dominate in habitats where rather harsh conditions are encountered. Like all other organisms, archaeal cells are susceptible to viral infections, and to date, about 100 archaeal viruses have been described. Among them, there are extraordinary virion morphologies as well as the common head-tailed viruses. Although approximately half of the isolated archaeal viruses belong to the latter group, no three-dimensional virion structures of these head-tailed viruses are available. Thus, rigorous comparisons with bacteriophages are not yet warranted. In the present study, we determined the genome sequences of two of such viruses of halophiles and solved their capsid structures by cryo-electron microscopy and three-dimensional image reconstruction. We show that these viruses are inactivated, yet remain intact, at low salinity and that their infectivity is regained when high salinity is restored. This enabled us to determine their three-dimensional capsid structures at low salinity to a ∼10-Å resolution. The genetic and structural data showed that both viruses belong to the same T-number class, but one of them has enlarged its capsid to accommodate a larger genome than typically associated with a T=7 capsid by inserting an additional protein into the capsid lattice.

Image reconstructions of helical assemblies of the HIV-1 CA protein

The type 1 human immunodeficiency virus (HIV-1) contains a conical capsid comprising approximately 1,500 CA protein subunits, which organizes the viral RNA genome for uncoating and replication in a new host cell. In vitro, CA spontaneously assembles into helical tubes and cones that resemble authentic viral capsids. Here we describe electron cryo-microscopy and image reconstructions of CA tubes from six different helical families. In spite of their polymorphism, all tubes are composed of hexameric rings of CA arranged with approximate local p6 lattice symmetry. Crystal structures of the two CA domains were 'docked' into the reconstructed density, which showed that the amino-terminal domains form the hexameric rings and the carboxy-terminal dimerization domains connect each ring to six neighbours. We propose a molecular model for the HIV-1 capsid that follows the principles of a fullerene cone, in which the body of the cone is composed of curved hexagonal arrays of CA rings and the ends are closed by inclusion of 12 pentagonal 'defects'.

Adding the third dimension to virus life cycles: three-dimensional reconstruction of icosahedral viruses from cryo-electron micrographs

Viruses are cellular parasites. The linkage between viral and host functions makes the study of a viral life cycle an important key to cellular functions. A deeper understanding of many aspects of viral life cycles has emerged from coordinated molecular and structural studies carried out with a wide range of viral pathogens. Structural studies of viruses by means of cryo-electron microscopy and three-dimensional image reconstruction methods have grown explosively in the last decade. Here we review the use of cryo-electron microscopy for the determination of the structures of a number of icosahedral viruses. These studies span more than 20 virus families. Representative examples illustrate the use of moderate- to low-resolution (7- to 35-A) structural analyses to illuminate functional aspects of viral life cycles including host recognition, viral attachment, entry, genome release, viral transcription, translation, proassembly, maturation, release, and transmission, as well as mechanisms of host defense. The success of cryo-electron microscopy in combination with three-dimensional image reconstruction for icosahedral viruses provides a firm foundation for future explorations of more-complex viral pathogens, including the vast number that are nonspherical or nonsymmetrical.

Geometry of phage head construction

The process of phage capsid assembly is reviewed, with particular attention to the probable role of curvature in helping to determine head size and shape. Both measures of curvature (mean curvature and Gaussian curvature, explained in Appendix I), should act best when the assembling shell is spherical, which could account for procapsids having this shape. Procapsids are also relatively thick, which should help head size determination by the mean curvature. The accessory role of inner and outer scaffolds in size determination and head nucleation is also reviewed. Nucleation failure generates various malformations, including non-closure, but the most common is the tube or polyhead, where the subunits' inherent curvature is expressed as a constant mean curvature. This induces lattice distortions that only partly understood. An extra tubular section in normal heads leads to the prolate shape, with a more complex and variable geometry. Newly assembled procapsids are both enlarged and toughened by the head transformation. In the procapsid the Gaussian curvature is uniformly distributed. But toughening tends to equalize bond lengths, so all the Gaussian curvature gets concentrated in the vertices, being zero elsewhere. This explains head angularization. Because of this change in Gaussian curvature, the regular subunit packing in the polyhedral head cannot be mapped onto the procapsid. This explains part of the hexon distortions found in this region. The implications of translocase-induced DNA twist, end rotation and the coiling of packaged DNA, are discussed. The symmetry mismatches between the head, connector and tail are discussed in relation to the possible alpha-helical structures of their DNA channels.

Electron microscopic studies on intracellular phage development--history and perspectives

This review is centered on the applications of thin sections to the study of intracellular precursors of bacteriophage heads. Results obtained with other preparation methods are included in so far as they are essential for the comprehension of the biological problems. This type of work was pioneered with phage T4, which contributed much to today's understanding of morphogenesis and form determination. The T4 story is rich in successes, but also in many fallacies. Due to its large size, T4 is obviously prone to preparation artefacts such as emptying, flattening and others. Many of these artefacts were first encountered in T4. Artefacts are mostly found in lysates, however, experience shows that they are not completely absent from thin sections. This can be explained by the fact that permeability changes induced by fixatives occur. The information gained from T4 was profitably used for the study of other phages. They are included in this review as far as electron microscopic studies played a major role in the elucidation of their morphogenetic pathways. Research on phage assembly pathways and form determination is a beautiful illustration for the power of the integrated approach which combines electron microscopy with biochemistry, genetics and biophysics. As a consequence, we did not restrict ourselves to the review of electron microscopic work but tried to integrate pertinent data which contribute to the understanding of the molecular mechanisms acting in determining the form of supramolecular structures.

Structure and inherent properties of the bacteriophage lambda head shell. VII. Molecular design of the form-determining major capsid protein

Some mutations in the major capsid protein (gpE) of lambda phage can alter the size and shape of the head shell or block the pathway of head maturation. Previous studies on the classification of such mutants showed that there are at least five functional sites on the gpE molecule. In this study, we determined the amino acid exchanges by DNA sequencing to elucidate the molecular design of the form-determining multifunctional protein gpE. In addition, we characterized the mutated gpE molecules by two-dimensional gel electrophoresis and studied suppression patterns of amber mutants at 43 amino acid residues. Those mutations map at 19 amino acid residues at 22 bases, which are located in three regions, 40 to 91, 222 to 246, and 284 to 324 of the 341 amino acid residues of gpE. These regions seem to be important in the activity of gpE, since amber mutations in these regions are suppressed on the average by less species of suppressors than those outside these regions. The mutations having different phenotypes are not segregated from each other, while some mutations having the same phenotype are separated far apart in the primary structure. This suggests that the functional sites were formed during evolution after the folding pattern of the ancestral gpE polypeptide chain had been established. Many of the mutations are located at serine, glycine and proline residues in predicted beta-turns.

Structure and inherent properties of the bacteriophage lambda head shell. VI. DNA-packaging-defective mutants in the major capsid protein

Some amino acid substitutions in the major capsid protein (gene E product) of lambda phage are found to cause a defect in DNA packaging. These substitutions permit initiation of DNA packaging and expansion of the prohead. However, cleavage of the concatemer DNA at the cos site takes place only to a very small extent, and the capsid eventually becomes empty. Interestingly, the mutations are suppressed by a decrease of the DNA length between the cos sites by 8000 to 10,000 bases. These properties are similar to those of amber mutants in gene D, which codes for the capsid outer-surface protein. Studies on the E missense.D amber double mutant show that the E protein and the D protein contribute additively to the stabilization of the condensed form of the DNA molecule in phage heads.

Structure and inherent properties of the bacteriophage lambda head shell. V. Amber mutants in gene E

A total of 940 amber mutants in gene E of bacteriophage lambda was isolated to study the structure-function relationship of the gene product, the major capsid protein. The mutants were mapped to 43 mutation sites, most of which have been located, albeit tentatively, at exact points in the known base sequence, by deletion mapping and by the specificity of mutagenesis and the patterns of suppression. The patterns of suppression were interpreted in terms of both the efficiency of insertion of amino acid residues by suppressors and the exchangeability of amino acid residues. The exchangeability seems to be related to the hydrophilicity of the residues themselves and their environment, as well as to the functional similarity between the replaced and the inserted amino acid residues. Suppression of two of the mutations resulted in the production of characteristic aberrant head-related structures, each showing a defect in a different functional site in the protein. This, together with the approximate positions of some specific missense mutations as determined in this study, revealed the distribution of the functional sites along the polypeptide chain of the gene E product.

Structure and inherent properties of the bacteriophage lambda head shell. IV. Small-head mutants

Missense mutants of bacteriophage lambda that produce small proheads were found among prophage mutants defective in the major head protein gpE. Measurements of the sedimentation coefficient and molecular weight of the small proheads showed that they have the T = 4 structure composed of 240 molecules of gpE instead of the wild-type T = 7 structure composed of 420 molecules of gpE. When the phage mutants were grown in groE mutants of Escherichia coli, they produced small unprocessed proheads, which contained a smaller number (about 60) of the core protein (gpNu3) molecules than normal unprocessed proheads, which contain about 180 molecules of gpNu3. This shows that the major head protein determines the size of not only the shell but also the core of unprocessed proheads. These mutants by themselves produce very few mature small-headed phage particles, partly because the lambda DNA molecule, whose cos sites are separated at a distance of 48,500 bases, is too long to be packaged into the small proheads. However, the small proheads can package shorter DNA in vivo and in vitro at somewhat reduced efficiency, if the length or a multiple of the length between the cos sites of the DNA is 13,000 to 19,000 bases.

Structure and inherent properties of the bacteriophage lambda head shell. III. Spectroscopic studies on the expansion of the prohead

The head shell of bacteriophage lambda expands by about 20% in diameter when it packages the DNA molecule in vivo. The expansion reaction is essentially a conformational change of the major head protein molecules to a state of lower free energy and can also be triggered in vitro by treatment with 4 M-urea. In order to investigate the conformational change, we have measured the circular dichroism, fluorescence and difference absorption spectra of the lambda head shell before and after the expansion by the treatment with urea. The far-ultraviolet circular dichroism spectra and the fluorescence spectra show that the expansion is not accompanied by a great change in the secondary structure (29% alpha-helix, 23% beta-structure) and the environment (non-polar) of the tryptophan residues of the major head protein molecule. On the other hand, by measurements of the circular dichroism and difference absorption spectra in the near-ultraviolet region as well as by chemical modification experiments with tetranitromethane, we have found that one or two tyrosine residues of the major head protein are transferred from a polar, solvent-exposed to a non-polar, solvent-unexposed environment during the expansion. Judging from these results, the conformational change seems to be mainly intermolecular or interdomainal rather than intradomainal.

Molecular architecture of bacteriophage T7 capsid

To determine the capsid structure of bacteriophage T7, we have investigated polycapsids, tubular capsid-related structures isolated from lysates of the T7 mutant am16. Biochemical analysis shows polycapsids to be composed of gp10, the major structural protein of the wild-type capsid. The conformational state of gp10 in polycapsids is indistinguishable from that in the mature virus capsid by the criteria of surface charge, buoyant density, and insensitivity to proteolysis by trypsin. Optical diffraction of electron micrographs of negatively stained polycapsids reveals a hexagonal surface lattice of periodicity 12.6 +/- 0.2 nm and is used to analyze the distribution of cylindrical foldings of this lattice into polycapsids (polymorphic variation). These foldings are found to be related to that of the capsid proper through the intrinsic curvature of gp10, each folding having a set of lattice lines whose radius of curvature is close to 29 nm. The fine structure of this surface lattice has been elucidated by digital image processing of electron micrographs. The capsomer is shown unequivocally to be a hexamer of characteristic morphology. By collating these results with earlier observations, we conclude that the structure of the normal T7 capsid is an orthodox icosahedron of triangulation class T = 7, composed of 60 hexamers and 12 pentamers.

Hexagonal surface array in a protein-secreting bacterium, Bacillus brevis 47

Bacillus brevis 47, a protein-secreting bacterium, contained two major proteins with approximate molecular weights of 150 000 and 130 000 in the cell wall. The cell surface was covered with a hexagonally arranged array of six structural units about 4 nm in diameter with a lattice constant of 14.5 nm. The regular array structure as well as the chemical composition of cell envelopes remained the same regardless of the growth conditions. A mutant, strain 47-57, which was isolated as a phage resistant colony, contained only the 150 000 protein as a major cell wall protein. Although the mutant had hexagonally arranged arrays with the same lattice constant as that of wild-type cells, the distribution of mass in the unit cell differed considerably from that of the wild-type cells. The number of structural units in the unit cell of the mutant was reduced from six to three. Taking these results together with filtered images of the wild-type and mutant envelopes, two possible models for the surface array of B. brevis 47 are discussed.