X-ray diffraction study of tail-tubes from bacteriophage T2L

Proteomic analysis and protein structure prediction of Shigella phage Sfk20 based on a comparative study using structure prediction approaches

Bacteriophages are the natural predators of bacteria and are available abundantly everywhere in nature. Lytic phages can specifically infect their bacterial host (through attachment to the receptor) and use their host replication machinery to replicate rapidly, a feature that enables them to kill a disease-causing bacteria. Hence, phage attachment to the host bacteria is the first important step of the infection process. It is reported in this study that the receptor could be an LPS which is responsible for the attachment of the Sfk20 phage to its host (Shigella flexneri 2a). Phage Sfk20 bacteriolytic activity was examined for preliminary optimization of phage titer. The phage Sfk20 viability at different saline conditions was conducted. The LC-MS/MS technique used here for detecting and identifying 40 Sfk20 phage proteins helped us to get an initial understanding of the structural landscape of phage Sfk20. From the identified proteins, six structurally significant proteins were selected for structure prediction using two neural network systems: AlphaFold2 and ESMFold, and one homology modeling software: Phyre2. Later the performance of these modeling systems was compared using various metrics. We conclude from the available and generated information that AlphaFold2 and Phyre2 perform better than ESMFold for predicting Sfk20 phage protein structures.

Investigation of bacteriophage T4 by atomic force microscopy

Bacteriophage T4 was visualized using atomic force microscopy (AFM). The images were consistent with, and complementary to electron microscopy images. Head heights of dried particles containing DNA were about 75 nm in length and 60 nm in width, or about 100 nm and 85 nm respectively when scanned in fluid. The diameter of hydrated tail assemblies was 28 nm and their lengths about 130 nm. Seven to eight pronounced, right-handed helical turns with a pitch of 15 nm were evident on the tail assemblies. At the distal end of the tail was a knob shaped mass, presumably the baseplate. The opposite end, where the tail assembly joins the head, was tapered and connected to the portal complex, which was also visible. Phage that had ejected their DNA revealed the internal injection tube of the tail assembly. Heads disrupted by osmotic shock yielded boluses of closely packed DNA that unraveled slowly to expose threads composed of multiple twisted strands of nucleic acid. Assembly errors resulted in the appearance of several percent of the phage exhibiting two rather than one tail assemblies that were consistently oriented at about 72° to one another. No pattern of capsomeres was visible on native T4 heads. A mutant that is negative for the surface proteins hoc and soc, however, clearly revealed the icosahedral arrangement of ring shaped capsomeres on the surface. The hexameric rings have an outside diameter of about 14 nm, a pronounced central depression, and a center-to-center distance of 15 nm. Phage collapsed on cell surfaces appeared to be dissolving, possibly into the cell membrane.

Type VI secretion apparatus and phage tail-associated protein complexes share a common evolutionary origin

Protein secretion is a common property of pathogenic microbes. Gram-negative bacterial pathogens use at least 6 distinct extracellular protein secretion systems to export proteins through their multilayered cell envelope and in some cases into host cells. Among the most widespread is the newly recognized Type VI secretion system (T6SS) which is composed of 15-20 proteins whose biochemical functions are not well understood. Using crystallographic, biochemical, and bioinformatic analyses, we identified 3 T6SS components, which are homologous to bacteriophage tail proteins. These include the tail tube protein; the membrane-penetrating needle, situated at the distal end of the tube; and another protein associated with the needle and tube. We propose that T6SS is a multicomponent structure whose extracellular part resembles both structurally and functionally a bacteriophage tail, an efficient machine that translocates proteins and DNA across lipid membranes into cells.

The tail sheath structure of bacteriophage T4: a molecular machine for infecting bacteria

The contractile tail of bacteriophage T4 is a molecular machine that facilitates very high viral infection efficiency. Its major component is a tail sheath, which contracts during infection to less than half of its initial length. The sheath consists of 138 copies of the tail sheath protein, gene product (gp) 18, which surrounds the central non-contractile tail tube. The contraction of the sheath drives the tail tube through the outer membrane, creating a channel for the viral genome delivery. A crystal structure of about three quarters of gp18 has been determined and was fitted into cryo-electron microscopy reconstructions of the tail sheath before and after contraction. It was shown that during contraction, gp18 subunits slide over each other with no apparent change in their structure.

The tail structure of bacteriophage T4 and its mechanism of contraction

Bacteriophage T4 and related viruses have a contractile tail that serves as an efficient mechanical device for infecting bacteria. A three-dimensional cryo-EM reconstruction of the mature T4 tail assembly at 15-A resolution shows the hexagonal dome-shaped baseplate, the extended contractile sheath, the long tail fibers attached to the baseplate and the collar formed by six whiskers that interact with the long tail fibers. Comparison with the structure of the contracted tail shows that tail contraction is associated with a substantial rearrangement of the domains within the sheath protein and results in shortening of the sheath to about one-third of its original length. During contraction, the tail tube extends beneath the baseplate by about one-half of its total length and rotates by 345 degrees , allowing it to cross the host's periplasmic space.

Molecular architecture of bacteriophage T4

In studying bacteriophage T4--one of the basic models of molecular biology for several decades--there has come a Renaissance, and this virus is now actively used as object of structural biology. The structures of six proteins of the phage particle have recently been determined at atomic resolution by X-ray crystallography. Three-dimensional reconstruction of the infection device--one of the most complex multiprotein components--has been developed on the basis of cryo-electron microscopy images. The further study of bacteriophage T4 structure will allow a better understanding of the regulation of protein folding, assembly of biological structures, and also mechanisms of functioning of the complex biological molecular machines.

Three-dimensional rearrangement of proteins in the tail of bacteriophage T4 on infection of its host

The contractile tail of bacteriophage T4 undergoes major structural transitions when the virus attaches to the host cell surface. The baseplate at the distal end of the tail changes from a hexagonal to a star shape. This causes the sheath around the tail tube to contract and the tail tube to protrude from the baseplate and pierce the outer cell membrane and the cell wall before reaching the inner cell membrane for subsequent viral DNA injection. Analogously, the T4 tail can be contracted by treatment with 3 M urea. The structure of the T4 contracted tail, including the head-tail joining region, has been determined by cryo-electron microscopy to 17 A resolution. This 1200 A-long, 20 MDa structure has been interpreted in terms of multiple copies of its approximately 20 component proteins. A comparison with the metastable hexagonal baseplate of the mature virus shows that the baseplate proteins move as rigid bodies relative to each other during the structural change.

The coat protein of Rabbit hemorrhagic disease virus contains a molecular switch at the N-terminal region facing the inner surface of the capsid

To function adequately, many if not all proteins involved in macromolecular assemblies show conformational polymorphism as an intrinsic feature. This general strategy has been described for many essential cellular processes. Here we describe this structural polymorphism in a viral protein, the coat protein of Rabbit hemorrhagic disease virus (RHDV), which is required during virus capsid assembly. By combining genetic, structure modeling, and cryo-electron microscopy and image processing analysis, we have established the mechanism that allows RHDV coat protein to switch among quasi-equivalent conformational states to achieve the appropriate curvature for the formation of a closed shell. The RHDV capsid structure is based on a T = 3 lattice, containing 180 copies of identical subunits, similar to those of other caliciviruses. The quasi-equivalent interactions between the coat proteins are achieved by the N-terminal region of a subset of subunits, which faces the inner surface of the capsid shell. Mutant coat protein lacking this N-terminal sequence assembles into T = 1 capsids. Our results suggest that the polymorphism of the RHDV T = 3 capsid might bear resemblance to that of plant virus T = 3 capsids.

Three-dimensional structure of bacteriophage T4 baseplate

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.

Three-dimensional structure of penicillium chrysogenum virus: a double-stranded RNA virus with a genuine T=1 capsid

Although double-stranded (ds) RNA viruses are a rather diverse group, they share general architectural principles and numerous functional features. All dsRNA viruses, from the mammalian reoviruses to the bacteriophage phi6, including fungal viruses, share a specialized capsid involved in transcription and replication of the dsRNA genome, and release of the viral plus strand RNA. This ubiquitous capsid consists of 120 protein subunits in a so-called T=2 organization. The stringent requirements of dsRNA metabolism may explain the similarities observed in capsid architecture among a broad spectrum of dsRNA viruses. We have used cryo-electron microscopy combined with three-dimensional reconstruction techniques and complementary biophysical techniques, to determine the structure at 26A resolution of the Penicillium chrysogenum virus (PcV) capsid. In contrast to all previous studies of dsRNA viruses, PcV capsid is an authentic T=1 capsid with 60 equivalent protein subunits. This T=1 capsid is built with the largest structural protein (110 kDa). Structural comparison between viral particles and capsids devoid of RNA show changes along the inner surface of the capsid, mostly located around the icosahedral 5 and 3-fold axis. Considering that there may be numerous interactions between the inner surface of the protein shell and the underlying RNA, the genome could have an important role in the conformation of the structural subunits. The empty capsid structure suggests a mechanism for transcript release from actively transcribing particles. Furthermore, sequence analysis of the PcV coat protein revealed that both halves of the protein share numerous regions of similar amino acid residues. These results open new perspectives when considering the structural organization of dsRNA virus capsids.

Electron microscopic analysis of membrane assemblies formed by the bacterial chemotaxis receptor Tsr

The serine receptor (Tsr) from Escherichia coli is representative of a large family of transmembrane receptor proteins that mediate bacterial chemotaxis by influencing cell motility through signal transduction pathways. Tsr and other chemotaxis receptors form patches in the inner membrane that are often localized at the poles of the bacteria. In an effort to understand the structural constraints that dictate the packing of receptors in the plane of the membrane, we have used electron microscopy to examine ordered assemblies of Tsr in membrane extracts isolated from cells engineered to overproduce the receptor. Three types of assemblies were observed: ring-like "micelles" with a radial arrangement of receptor subunits, two-dimensional crystalline arrays with approximate hexagonal symmetry, and "zippers," which are receptor bilayers that result from the antiparallel interdigitation of cytoplasmic domains. The registration among Tsr molecules in the micelle and zipper assemblies was sufficient for identification of the receptor domains and for determination of their contributions to the total receptor length. The overall result of this analysis is compatible with an atomic model of the receptor dimer that was constructed primarily from the X-ray crystal structures of the periplasmic and cytoplasmic domains. Significantly, the micelle and zipper structures were also observed in fixed, cryosectioned cells expressing the Tsr receptor at high abundance, suggesting that the modes of Tsr assembly found in vitro are relevant to the situation in the cell.

C terminus of infectious bursal disease virus major capsid protein VP2 is involved in definition of the T number for capsid assembly

Infectious bursal disease virus (IBDV), a member of the Birnaviridae family, is a double-stranded RNA virus. The IBDV capsid is formed by two major structural proteins, VP2 and VP3, which assemble to form a T=13 markedly nonspherical capsid. During viral infection, VP2 is initially synthesized as a precursor, called VPX, whose C end is proteolytically processed to the mature form during capsid assembly. We have computed three-dimensional maps of IBDV capsid and virus-like particles built up by VP2 alone by using electron cryomicroscopy and image-processing techniques. The IBDV single-shelled capsid is characterized by the presence of 260 protruding trimers on the outer surface. Five classes of trimers can be distinguished according to their different local environments. When VP2 is expressed alone in insect cells, dodecahedral particles form spontaneously; these may be assembled into larger, fragile icosahedral capsids built up by 12 dodecahedral capsids. Each dodecahedral capsid is an empty T=1 shell composed of 20 trimeric clusters of VP2. Structural comparison between IBDV capsids and capsids consisting of VP2 alone allowed the determination of the major capsid protein locations and the interactions between them. Whereas VP2 forms the outer protruding trimers, VP3 is found as trimers on the inner surface and may be responsible for stabilizing functions. Since elimination of the C-terminal region of VPX is correlated with the assembly of T=1 capsids, this domain might be involved (either alone or in cooperation with VP3) in the induction of different conformations of VP2 during capsid morphogenesis.

Structural analysis of the bacteriophage T3 head-to-tail connector

The connector protein of bacteriophage T3, p8, has been overexpressed in Escherichia coli. Purification of the oligomers built by several copies of p8 reveals a mixed population of dodecamers and tridecamers. The percentages of these two types of oligomers differ in every culture growth, indicating that assembly of this protein depends upon the conditions of the expression system. Those cultures that generated a majority of dodecamers allowed, after purification of the connectors, the two-dimensional crystallization of the dodecamers in a tetragonal arrangement, while the tridecamers did not form crystals. The processing and averaging of several images of frozen-hydrated crystals and their internal phase comparison shows that the crystals are arranged in a P42(1)2 space group, with cell unit dimensions of 165 x 165 A. The three-dimensional reconstruction generated with images of crystals ranging from 0 degrees to 60 degrees tilt reveals a wide domain surrounded by 12 protrusions and a narrow domain that serves to interact with the tail of the bacteriophage. A channel runs along the connector wide enough to allow the translocation of a double-stranded DNA molecule into the prohead. The general structure of the T3 connector is very similar to those obtained for other nonrelated bacteriophages and strongly suggests that the shape of this important viral structure is intimately related to its function.

Geometry of phage head construction

The process of phage capsid assembly is reviewed, with particular attention to the probable role of curvature in helping to determine head size and shape. Both measures of curvature (mean curvature and Gaussian curvature, explained in Appendix I), should act best when the assembling shell is spherical, which could account for procapsids having this shape. Procapsids are also relatively thick, which should help head size determination by the mean curvature. The accessory role of inner and outer scaffolds in size determination and head nucleation is also reviewed. Nucleation failure generates various malformations, including non-closure, but the most common is the tube or polyhead, where the subunits' inherent curvature is expressed as a constant mean curvature. This induces lattice distortions that only partly understood. An extra tubular section in normal heads leads to the prolate shape, with a more complex and variable geometry. Newly assembled procapsids are both enlarged and toughened by the head transformation. In the procapsid the Gaussian curvature is uniformly distributed. But toughening tends to equalize bond lengths, so all the Gaussian curvature gets concentrated in the vertices, being zero elsewhere. This explains head angularization. Because of this change in Gaussian curvature, the regular subunit packing in the polyhedral head cannot be mapped onto the procapsid. This explains part of the hexon distortions found in this region. The implications of translocase-induced DNA twist, end rotation and the coiling of packaged DNA, are discussed. The symmetry mismatches between the head, connector and tail are discussed in relation to the possible alpha-helical structures of their DNA channels.

Plant riboflavin biosynthesis. Cloning, chloroplast localization, expression, purification, and partial characterization of spinach lumazine synthase

Lumazine synthase, which catalyzes the penultimate step of riboflavin biosynthesis, has been cloned from three higher plants (spinach, tobacco, and arabidopsis) through functional complementation of an Escherichia coli auxotroph. Whereas the three plant proteins exhibit some structural similarities to known microbial homologs, they uniquely possess N-terminal polypeptide extensions that resemble typical chloroplast transit peptides. In vitro protein import assays with intact chloroplasts and immunolocalization experiments verify that higher plant lumazine synthase is synthesized in the cytosol as a larger molecular weight precursor protein, which is post-translationally imported into chloroplasts where it is proteolytically cleaved to its mature size. The authentic spinach enzyme is estimated to constitute <0.02% of the total chloroplast protein. Recombinant "mature" spinach lumazine synthase is expressed in E. coli at levels exceeding 30% of the total soluble protein and is readily purified to homogeneity using a simple two-step procedure. Apparent V(max) and K(m) values obtained with the purified plant protein are similar to those reported for microbial lumazine synthases. Electron microscopy and hydrodynamic studies reveal that native plant lumazine synthase is a hollow capsid-like structure comprised of 60 identical 16.5-kDa subunits, resembling its icosahedral counterparts in E. coli and Bacillus subtilis.

Enzymatic and structural similarities between the Escherichia coli ATP-dependent proteases, ClpXP and ClpAP

Escherichia coli ClpX, a member of the Clp family of ATPases, has ATP-dependent chaperone activity and is required for specific ATP-dependent proteolytic activities expressed by ClpP. Gel filtration and electron microscopy showed that ClpX subunits (Mr 46, 000) associate to form a six-membered ring (Mr approximately 280, 000) that is stabilized by binding of ATP or nonhydrolyzable analogs of ATP. ClpP, which is composed of two seven-membered rings stacked face-to-face, interacts with the nucleotide-stabilized hexamer of ClpX to form a complex that could be isolated by gel filtration. Electron micrographs of negatively stained ClpXP preparations showed side views of 1:1 and 2:1 ClpXP complexes in which ClpP was flanked on either one or both sides by a ring of ClpX. Thus, as was seen for ClpAP, a symmetry mismatch exists in the bonding interactions between the seven-membered rings of ClpP and the six-membered rings of ClpX. Competition studies showed that ClpA may have a slightly higher affinity (approximately 2-fold) for binding to ClpP. Mixed complexes of ClpA, ClpX, and ClpP with the two ATPases bound simultaneously to opposite faces of a single ClpP molecule were seen by electron microscopy. In the presence of ATP or nonhydrolyzable analogs of ATP, ClpXP had nearly the same activity as ClpAP against oligopeptide substrates (>10,000 min-1/tetradecamer of ClpP). Thus, ClpX and ClpA interactions with ClpP result in structurally analogous complexes and induce similar conformational changes that affect the accessibility and the catalytic efficiency of ClpP active sites.

Structure of L-A virus: a specialized compartment for the transcription and replication of double-stranded RNA

The genomes of double-stranded (ds)RNA viruses are never exposed to the cytoplasm but are confined to and replicated from a specialized protein-bound compartment-the viral capsid. We have used cryoelectron microscopy and three-dimensional image reconstruction to study this compartment in the case of L-A, a yeast virus whose capsid consists of 60 asymmetric dimers of Gag protein (76 kD). At 16-A resolution, we distinguish multiple domains in the elongated Gag subunits, whose nonequivalent packing is reflected in subtly different morphologies of the two protomers. Small holes, 10-15 A across, perforate the capsid wall, which functions as a molecular sieve, allowing the exit of transcripts and the influx of metabolites, while retaining dsRNA and excluding degradative enzymes. Scanning transmission electron microscope measurements of mass-per-unit length suggest that L-A RNA is an A-form duplex, and that RNA filaments emanating from disrupted virions often consist of two or more closely associated duplexes. Nuclease protection experiments confirm that the genome is entirely sequestered inside full capsids, but it is packed relatively loosely; in L-A, the center-to-center spacing between duplexes is 40-45 A, compared with 25-30 A in other double-stranded viruses. The looser packing of L-A RNA allows for maneuverability in the crowded capsid interior, in which the genome (in both replication and transcription) must be translocated sequentially past the polymerase immobilized on the inner capsid wall.

The herpes simplex virus procapsid: structure, conformational changes upon maturation, and roles of the triplex proteins VP19c and VP23 in assembly

The proteins coded by the five major capsid genes of herpes simplex virus 1, VP5 (gene UL19), VP19c (UL38), VP23 (UL18), pre-VP22a (UL26.5), and pre-VP21 (UL26), assemble into fragile roundish "procapsids", which mature into robust polyhedral capsids in a transition similar to that undergone by bacteriophage proheads. Here we describe the HSV-1 procapsid structure to a resolution of approximately 2.7 nm from three-dimensional reconstructions of cryo-electron micrographs. Comparison with the mature capsid provides insight into the large-scale conformational changes that take place upon maturation. In the procapsid, the elongated protomers (VP5 subunits) make little contact with each other except around the bases of the hexons and pentons, whereas they are tightly clustered into capsomers in the mature state; the axial channels, which are constricted or blocked in the mature capsid, are fully open; and unlike the well observed 6-fold symmetry of mature hexons, procapsid hexons are distorted into oval and triangular shapes. These deformations reveal a VP5 domain in the inner part of the protrusion wall which participates in inter-protomer bonding in the procapsid and is close to the site where the channel closes upon maturation. Remarkably, there are no direct contacts between neighboring capsomers; instead, interactions between them are mediated by the "triplexes" at the sites of local 3-fold symmetry. This observation discloses the mechanism whereby the triplex proteins, VP19c and VP23, play their essential roles in capsid morphogenesis. In the mature capsid, density extends continuously between neighboring capsomers in the inner "floor" layer. In contrast, there are large gaps in the corresponding region of the procapsid, implying that formation of the floor involves extensive remodeling. Inside the procapsid shell is the hollow spherical scaffold, whose radial density profile indicates that the major scaffold protein, pre-VP22a, is a long molecule (> 24 nm) composed of three domains. Since no evidence of icosahedral symmetry is detected in the scaffold, we infer that (unless higher resolution is required) the scaffold may not be an icosahedral shell but may instead be a protein micelle with a preferred radius of curvature.

Dimorphism of hepatitis B virus capsids is strongly influenced by the C-terminus of the capsid protein

Hepatitis B virus (HBV) is an enveloped virus with an icosahedral capsid. Its homodimeric capsid protein ("core antigen") assembles into particles of two sizes, one with T = 3 icosahedral symmetry (90 dimers) and the other with T = 4 symmetry (120 dimers). We have investigated this assembly process in vitro, using a variety of purified, bacterially expressed, capsid proteins. All of our constructs lacked the predominantly basic C-terminal 34 amino acids of the full-length capsid protein (183 amino acids) and were further truncated to terminate at specific points between residues 138 and 149. While the smallest construct (138 residues) did not assemble into capsids, those terminating at residue 140, and beyond, assembled into mixtures of T = 3 and T = 4 particles. The two kinds of capsids could be separated on sucrose gradients and did not interconvert upon protracted storage. The proportion of T = 3 capsids, assayed by sucrose gradient fractionation, analytical ultracentrifugation, and cryoelectron microscopy, was found to increase systematically with larger deletions from the C-terminus. The variant terminating at residue 149 formed approximately 5% of T = 3 capsids, while the 140-residue protein produced approximately 85% of this isomorph. For the 147-residue capsid protein, the structures of both capsids were determined to 17 A resolution by three-dimensional reconstruction of cryoelectron micrographs. In these density maps, the boundaries of the constituent dimers can be clearly seen and the quaternary structures of the two capsids compared. The arrangement of dimers around their icosahedral five-fold axes is almost identical, whereas the quasi-six-fold arrangements of dimers are distinctly different.

Structural responsiveness of filamentous bacteriophage Pf1: comparison of virion structure in fibers and solution. The effect of temperature and ionic strength

X-ray diffraction from fibers and magnetically oriented solutions has been used to study the effect of changes in environment on the helical symmetry and radial structure of the Pf1 virus particle. Detailed analysis of equatorial scattering to a spacing of 8-10 A was used to identify small radial motions of structural elements in the virus particle. R-factor ratios were used to determine the statistical significance of observed changes. Comparison of the structure of virus particles in fibers with those in solution indicated that the helical symmetry of the virions remains unchanged during fiber formation. In most fibers the virions appear to be slightly distorted by the tight packing of virus particles. This distortion results in an apparent increase in the radius of the virus particle of approximately 0.6 A. A change in the radius of the DNA is also observed. Increase in the concentration of solvent molecules during fiber formation results in penetration of the virus interior by some solvent components. NaCl is also able to enter the virus interior. The change in the helical symmetry of the virions at approximately 8 degrees C appears to be the same whether observed by diffraction from fibers or from solutions. Only subtle changes in radial structure are associated with the temperature transition.

Potential length determiner and DNA injection protein is extruded from bacteriophage T4 tail tubes in vitro

Bacteriophage T4 tails contain a set of extended protein molecules in the central channel of the tail tube through which the DNA must exit during infection. Treatment of tails with guanidine hydrochloride separates the baseplates, leaving the tail tube and several specific tube-associated proteins. Methods were developed to purify these structures. Using specific antisera, immunoblotting, and electrophoretic analysis, these structures were shown to contain proteins gp19, 29, and 48. Electron microscopy showed specifically defined stain penetration into the tail tube, a bulge at one end, and a short fiber extruded from the tube. These structures could be removed by proteases but the gp19 tube itself was resistant. Structural studies of tails and intact phage show that the bulge and fiber are at the end of the tube that interacts with the cell membrane during infection. Since the fiber did not protrude from baseplates or from incomplete (short) tube-baseplates, we propose that it is first assembled as a compact structure formed of six copies of a tube-associated protein, which elongates during tail tube formation to fill the central channel, span the length of the tube, and regulate its length. We suggest that the exit of this fiber during infection signals DNA ejection.

Mass distribution of a probable tail-length-determining protein in bacteriophage T4

Analysis of dark-field scanning transmission electron micrographs of unstained freeze-dried specimens established that the interior of the intact bacteriophage T4 tail tube contains extra density that is missing in tubes artificially emptied by treatment with 3 M guanidine hydrochloride. The mass of the tail tube is 3.1 X 10(6) daltons, and the central channel is 3.2 nm in diameter. Quantitative analysis of the density data is consistent with the presence of up to six strands of a protein molecule in the central channel that could serve as the template or ruler structure that determines the length of the bacteriophage tail and that could be injected into the cell with the phage DNA.

Three-dimensional structure of unstained, frozen-hydrated extended tails of bacteriophage T4

Unsupported, unstained frozen-hydrated extended tails of bacteriophage T4 have been studied by cryo-electron microscopy. Their three-dimensional structure has been reconstructed after correlation and averaging of the information from different particles. While the reconstructions of hydrated tails show all the features found by conventional electron microscopy, they are characterized by an open structure. Individual subunits constituting the axial repeat cannot be outlined unambiguously, as the density connectivity is sensitive to the phase-contrast transfer function effects. In order to minimize these effects, we found that the best data set for three-dimensional reconstruction is composed of layer-lines corrected for the phase-contrast transfer function and an uncorrected equator.

Gene 20 product of bacteriophage T4. II. Its structural organization in prehead and bacteriophage

The location of gene 20 product of bacteriophage T4 in phage and phage percursors has been determined by immunochemical analysis of polyacrylamide gels, immunoturbidimetry and immunoelectron microscopy. The protein is present at the membrane attachment site of the prehead, a head precursor, and is accessible to the antibodies in the solution. It is present at the tail attachment site of the capsid, partially buried in the structure. In complete phage particles it is totally buried in the structure. It is in contact with the major shell proteins, gp23 and gp23*, respectively, in preheads and capsids, as revealed by partial crosslinking experiments. It forms the upper collar of the neck in necked tails. The lower collar is constructed from other gene products. On the basis of these data a structural model of the neck region of the phage has been derived. This model is consistent with a number of events in phage assembly, such as the role of gp20 in head assembly and DNA packaging, prehead detachment from the bacterial membrane and head-tail attachment. The symmetry mismatch known to occur between head and tail has been localized at the gp20-gp23* contact area.

Bacteriophage SPO1 structure and morphogenesis. I. Tail structure and length regulation

Bacteriophage SPO1, a structually complex phage with hydroxymethyl uracil replacing thymine, has been studied by structural and chemical methods with the aim of defining the virion organization. The contractile tail of SPO1 consists of a complex baseplate, a tail tube, and a 140-nm-long sheath composed of stacked disks (4.1 nm repeat), each containing six subunits of molecular weight 60,300. The subunits are arranged in six parallel helices, each with a helical screw angle (omega 0) of 22.5 degrees. The baseplate was shown to undergo a structural rearrangement during tail contraction into a hexameric pinwheel. A mutation in gene 8 which produced unattached heads and tails also produced tails of different lengths. The tail length distribution suggests that the smallest integral length increment is a single disk of subunits. The structural arrangement of subunits in long tails is identical to that of normal tails, and the tails can contract. Many of the long tails showed partial stain penetration within the tail tube to a point which coincides with the top of a unit-length tail. The implications of these findings with respect to tail length regulation are discussed.

Evidence for an internal component of the bacteriophage T4D tail core: a possible length-determining template

The length of the T4 tail is precisely regulated in vivo at the time of polymerization of the tail core protein onto the baseplate. Since no mutations which alter tail length have been identified, a study of in vivo-assembled tail cores was begun to determine whether the structural properties of assembled cores would reveal the mechanism of length regulation. An assembly intermediate consisting of a core attached to a baseplate (core-baseplate) was purified from cells infected with a T4 mutant in gene 15. When core-base plates were treated with guanidine hydrochloride, cores were released from baseplates. The released cores had the same mean length as cores attached to baseplates. Electron micrographs of these cores showed partial penetration of negative stain into one end, and, at the opposite end, a modified tip which often appeared as a short fiber projecting from the core. When cores were purified and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, two minor proteins and the major core protein were detected. One minor protein, the product of gene 48 (gp48), was present in at least 72% of the amount found in core-baseplates, relative to the amount of the major core protein. These findings suggest that cores contain a fibrous structure, possibly composed of gp48, which may form a "ruler" that specifies the length of the T4 tail.