Plasmid replication stimulates DNA recombination in Bacillus subtilis

Development of a rapid method for site-directed mutagenesis in Streptococcus zooepidemicus

This paper describes the development of a straightforward method for site-directed gene mutagenesis in Streptococcus zooepidemicus, inspired by the mechanism of natural competence regulated by ComX in other streptococci. An alternative sigma factor comX gene was overexpressed from a plasmid in S. zooepidemicus and electrocompetent cells were prepared. As proof of concept, a DNA cassette with two targeting regions flanking a kanamycin resistance gene was spliced in an overlap extension PCR and electroporated. The cassette was then integrated in the genomic DNA by homologous recombination. Next, the gene SeseC_00180 (fibrinogen- and Ig-binding protein precursor) was selected as target for markerless gene deletion and the impact of its loss on the resulting hyaluronan production was determined. The new method of site-directed mutagenesis is significant because it is not necessary to clone the DNA cassette in an auxiliary vector, electroporating it in S. zooepidemicus cells is enough, which allows to bypass the problems with hard to clone DNA sequences and speeds up the whole process of mutation generation in S. zooepidemicus.

Construction of a restriction-less, marker-less mutant useful for functional genomic and metabolic engineering of the biofuel producer Clostridium acetobutylicum

BACKGROUND

Clostridium acetobutylicum is a gram-positive, spore-forming, anaerobic bacterium capable of converting various sugars and polysaccharides into solvents (acetone, butanol, and ethanol). The sequencing of its genome has prompted new approaches to genetic analysis, functional genomics, and metabolic engineering to develop industrial strains for the production of biofuels and bulk chemicals.

RESULTS

The method used in this paper to knock-out or knock-in genes in C. acetobutylicum combines the use of an antibiotic-resistance gene for the deletion or replacement of the target gene, the subsequent elimination of the antibiotic-resistance gene with the flippase recombinase system from Saccharomyces cerevisiae, and a C. acetobutylicum strain that lacks upp, which encodes uracil phosphoribosyl-transferase, for subsequent use as a counter-selectable marker. A replicative vector containing (1) a pIMP13 origin of replication from Bacillus subtilis that is functional in Clostridia, (2) a replacement cassette consisting of an antibiotic resistance gene (MLS (R) ) flanked by two FRT sequences, and (3) two sequences homologous to selected regions around target DNA sequence was first constructed. This vector was successfully used to consecutively delete the Cac824I restriction endonuclease encoding gene (CA_C1502) and the upp gene (CA_C2879) in the C. acetobutylicum ATCC824 chromosome. The resulting C. acetobutylicum Δcac1502Δupp strain is marker-less, readily transformable without any previous plasmid methylation and can serve as the host for the "marker-less" genetic exchange system. The third gene, CA_C3535, shown in this study to encode for a type II restriction enzyme (Cac824II) that recognizes the CTGAAG sequence, was deleted using an upp/5-FU counter-selection strategy to improve the efficiency of the method. The restriction-less marker-less strain and the method was successfully used to delete two genes (ctfAB) on the pSOL1 megaplasmid and one gene (ldhA) on the chromosome to get strains no longer producing acetone or l-lactate.

CONCLUSIONS

The restriction-less, marker-less strain described in this study, as well as the maker-less genetic exchange coupled with positive selection, will be useful for functional genomic studies and for the development of industrial strains for the production of biofuels and bulk chemicals.

Construction of isogenic mutants in Streptococcus gallolyticus based on the development of new mobilizable vectors

Streptococcus gallolyticus is an emerging cause of infective endocarditis that has been epidemiologically linked to colorectal cancer. S. gallolyticus is poorly transformable using electroporation and no defined mutant has been published yet. Hence, we used mobilization to introduce plasmid DNA from Streptococcus agalactiae into S. gallolyticus using the transfer origin of the conjugative element TnGBS1 (oriTTnGBS1), followed by a classical homologous recombination technique. Two isogenic mutants of S. gallolyticus UCN34, one deleted for the pil1 pilus operon and another for the sortase A gene, were constructed and characterized. This genetic tool should help in unravelling virulence mechanisms of this bacterium.

Efficient markerless gene replacement in Corynebacterium glutamicum using a new temperature-sensitive plasmid

Random chemical mutation of a Corynebacterium glutamicum-Escherichia coli shuttle vector derived from plasmid pCGR2 was done using hydroxylamine. It brought about amino acid substitutions G109D and E180K within the replicase superfamily domain of the plasmid's RepA protein and rendered the plasmid highly unstable, especially at higher incubation temperatures. Colony formation of C. glutamicum was consequently completely inhibited at 37°C but not at 25°C. G109 is a semi-conserved residue mutation which resulted in major temperature sensitivity. E180 on the other hand is not conserved even among RepA proteins of closely related C. glutamicum pCG1 family plasmids and its independent mutation caused relatively moderate plasmid instability. Nonetheless, simultaneous mutation of both residues was required to achieve temperature-sensitive colony formation. This new pCGR2-derived temperature-sensitive plasmid enabled highly efficient chromosomal integration in a variety of C. glutamicum wild-type strains, proving its usefulness in gene disruption studies. Based on this, an efficient markerless gene replacement system was demonstrated using a selection system incorporating the temperature-sensitive replicon and Bacillus subtilis sacB selection marker, a system hitherto not used in this bacterium. Single-crossover integrants were accurately selected by temperature-dependent manner and 93% of the colonies obtained by the subsequent sucrose selection were successful double-crossover recombinants.

Small rolling circle plasmids in Bacillus subtilis and related species: Organization, distribution, and their possible role in host physiology

Bacillus subtilis and related species (Bacillus licheniformis, Bacillus pumilus, Bacillus amyloliquefaciens, and Bacillus mojavensis) represent a group of bacteria largely studied and widely employed by industry. Small rolling circle replicating plasmids of this group of bacteria have been intensively studied as they represent a convenient model for genetic research and for the construction of molecular tools for the genetic modification of their hosts. Through the computational analysis of the available plasmid sequences to date, the first part of this review focuses on the main stages that the present model for rolling circle replication involves, citing the research data which helped to elucidate the mechanism by which these molecules replicate. Analysis of the distribution and phylogeny of the small RC plasmids inside the Bacillus genus is then considered, emphasizing the low level of diversity observed among these plasmids through the in silico analysis of their organization and the sequence divergence of their replication module. Finally, the parasitic vs. mutualistic nature of small rolling circle plasmids is briefly discussed.

Biogenesis and replication of small plasmid-like derivatives of the mitochondrial DNA in Neurospora crassa

For reasons that are not obvious, sets of related, small, plasmid-like elements appear spontaneously and become amplified in the mitochondria of some cytochrome-deficient and/or UV-sensitive mutants of Neurospora crassa. These plasmid-like DNAs are multimeric series of circular molecules, each consisting of a finite number of identical tandem repeats of a relatively short mtDNA-derived nucleotide sequence (monomer). The plasmid-like elements that have been characterized in this study consist of monomers that vary in length from 125 to 296 base pairs, depending on the strain of origin. Each monomer includes a GC-rich palindrome that is followed by the promoter and a short section of the 5' terminal region of the mitochondrial large-subunit rRNA gene (rnl). Analyses of the nucleotide sequences of variants of this group of elements indicates that they are not generated by intra-molecular recombination, but are the result of single- or double-strand DNA breaks that are produced by a mismatch or base excision repair process. These elements do not appear to contain a defined origin of replication, but replicate by a recombination-dependent rolling-circle mechanism. One- and two-dimensional gel electrophoresis of the plasmid-like element derived Hind III and Pst I fragments combined with S1 nuclease treatments suggest that the intergenic GC-rich palindromes, which are ubiquitous in the mtDNA Neurospora, could be replication fork pausing points.

Creating new genes by plasmid recombination in Escherichia coli and Bacillus subtilis

Gene shuffling is a way of creating proteins with interesting new characteristics, starting from diverged sequences. We tested an alternative to gene shuffling based on plasmid recombination and found that Bacillus subtilis efficiently recombines sequences with 4% divergence, and Escherichia coli mutS is more appropriate for sequences with 22% divergence.

Insertion-duplication mutagenesis of Salmonella enterica and related species using a novel thermosensitive vector

We constructed a novel temperature-sensitive vector as a tool for gene disruption by insertion-duplication mutagenesis (IDM) in Salmonella enterica and related species. A phoN insertion mutant was proven highly stable during growth in LB medium and during infection of macrophage cells in the absence of selection pressure. By progressive shortening of a phoN fragment, the minimal length for effective insertional mutagenesis driven by homologous recombination was determined to be 50 bp, allowing to disrupt even short genes that could not yet be subjected to site-specific IDM. We also showed that plasmid excision from the chromosome restores the wild-type genotype with a reliability of 98%. Intracellular recovery of the excised vector provides the option to switch between two genotypes and thus to rapidly attribute the observed mutant phenotype to the targeted gene. In addition, a fragment library was used to measure the integration rate at various chromosomal sites that varies greatly by at least 2.5 magnitudes, independently from the length of the cloned fragment.

Development of an asporogenic Bacillus licheniformis for the production of keratinase

AIMS

Bacillus licheniformis PWD-1 is a keratin-degrading, spore-forming bacterium isolated from a poultry waste digester. A sporulation-deficient mutant of B. licheniformis PWD-1, named B. licheniformis WBG, was developed and characterized.

METHODS AND RESULTS

The mutation was generated using the splicing by overlap extension PCR method (Gene SOEing) to create 256 bp deletion in the spoIIAC gene, which encodes an essential sporulation-specific sigma factor. In vivo gene replacement was accomplished with the use of a temperature-sensitive plasmid that is able to integrate and excise the nucleotide fragment 256 bp from the B. licheniformis chromosome. PCR analysis and DNA sequencing confirmed the spoIIAC gene deletion. Heat-treatment assays and electron microscopy verified the absence of spores.

CONCLUSIONS

This asporogenic strain is able to express normal levels of keratinase when compared with its wild-type host.

SIGNIFICANCE AND IMPACT OF THE STUDY

In this study, a method of constructing a stable sporulation-defective strain was developed. It can be potentially useful as a tool to generate asporogenic strains of Bacillus that retain their industrial capabilities for production of exoproteases and other exozymes.

New vector for efficient allelic replacement in naturally nontransformable, low-GC-content, gram-positive bacteria

A shuttle vector designated pMAD was constructed for quickly generating gene inactivation mutants in naturally nontransformable gram-positive bacteria. This vector allows, on X-Gal (5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside) plates, a quick colorimetric blue-white discrimination of bacteria which have lost the plasmid, greatly facilitating clone identification during mutagenesis. The plasmid was used in Staphylococcus aureus, Listeria monocytogenes, and Bacillus cereus to efficiently construct mutants with or without an associated antibiotic resistance gene.

Synthesis of group A streptococcal virulence factors is controlled by a regulatory RNA molecule

The capacity of pathogens to cause disease depends strictly on the regulated expression of their virulence factors. In this study, we demonstrate that the untranslated mRNA of the recently described streptococcal pleiotropic effect locus (pel), which incidentally contains sagA, the structural gene for streptolysin S, is an effector of virulence factor expression in group A beta-haemolytic streptococci (GAS). Our data suggest that the regulation by pel RNA occurs at both transcriptional (e.g. emm, sic, nga) and post-transcriptional (e.g. SpeB) levels. We could exclude the possibility that the pel phenotype was linked to a polar effect on downstream genes (sagB-I). Remarkably, the RNA effector is regulated in a growth phase-dependent fashion and we provide evidence that pel RNA expression is induced by conditioned media.

Impaired growth rates in milk of Lactobacillus helveticus peptidase mutants can be overcome by use of amino acid supplements

To evaluate the contribution of intracellular peptidases to the growth of the 14-amino-acid (aa) auxotroph Lactobacillus helveticus CNRZ32, single- and multiple-peptidase-deletion mutants were constructed. Two broad-specificity aminopeptidases (PepC and PepN) and X-prolyl dipeptidyl aminopeptidase (PepX) were inactivated through successive cycles of chromosomal gene replacement mutagenesis. The inactivation of all three peptidases in JLS247 ((Delta)pepC (Delta)pepN (Delta)pepX) did not affect the growth rate in amino acid-defined medium. However, the peptidase mutants generally had decreased specific growth rates when acquisition of amino acids required hydrolysis of the proteins in milk, the most significant result being a 73% increase in generation time for JLS247. The growth rate deficiencies in milk were overcome by amino acid supplements with some specificity to each of the peptidase mutants. For example, milk supplementation with Pro resulted in the most significant growth rate increase for (Delta)pepX strains and a 7-aa supplement (Asn, Cys, Ile, Pro, Ser, Thr, and Val) resulted in a JLS247 growth rate indistinguishable from that of the wild type. Our results show that characterization of the activities of the broad-specificity aminopeptidases had little predictive value regarding the amino acid supplements found to enhance the milk growth rates of the peptidase mutant strains. These results represent the first determination of the physiological roles with respect to specific amino acid requirements for peptidase mutants grown in milk.

Replication mutations differentially enhance RecA-dependent and RecA-independent recombination between tandem repeats in Bacillus subtilis

We have studied DNA recombination between 513 bp tandem direct repeats present in a kanamycin resistance gene inserted in the Bacillus subtilis chromosome. Tandem repeat deletion was not significantly affected by a recA mutation. However, recombination was stimulated by mutations in genes encoding replication proteins, including the primosomal proteins DnaB, DnaD and the DnaG primase, the putative DNA polymerase III subunits PolC, DnaN and DnaX, as well as the DNA polymerase DnaE. Hyper-recombination was found to be dependent on RecA in the dnaE, dnaN and dnaX mutants, whereas the dnaG and dnaD mutants stimulated recombination independently of RecA. Altogether, these data show that both RecA-dependent and RecA-independent mechanisms contribute to recombination between tandem repeats in B. subtilis and that both types of recombination are stimulated by replication mutations.

Gene transfer to Clostridium cellulolyticum ATCC 35319

Although much is known about the bacterial cellulosome and its various protein components, their contributions to bacterial growth on cellulose and the process of cellulolysis in vivo cannot currently be assessed. To remedy this, the authors have developed gene transfer techniques for Clostridium cellulolyticum ATCC 35319. Firstly, transfer of Tn1545 has been obtained using an Enterococcus faecalis donor. Secondly, IncP-mediated conjugative mobilization of plasmids from Escherichia coli donors has also been achieved. The yield of transconjugants in both cases was low and was probably limited by the suboptimal growth conditions that must of necessity be employed for the co-culture of oligotrophic C. cellulolyticum with copiotrophic donors. A restriction endonuclease was detected in crude extracts of C. cellulolyticum. This enzyme, named CCE:I, is an isoschizomer of MSP:I (HPA:II). Electro-transformation was employed to establish plasmids containing the replication functions of pAMss1 (En. faecalis), pIM13 (Bacillus subtilis), pCB102 (Clostridium butyricum), pIP404 (Clostridium perfringens) and pWV01 (Lactococcus lactis subsp. cremoris) in C. cellulolyticum. Transformants were only obtained if the DNA was appropriately methylated on the external C of the sequence 5'-CCGG-3' using either BSU:FI methylase in vivo or MSP:I methylase in vitro. Plasmids based on the pAMss1 and pIM13 replicons were more stably maintained than one based on the pCB102 replicon. Selection of transformants on solid medium led to low apparent transformation efficiencies (approx. 10(2) transformants per microg DNA) which might, in part, reflect the low plating efficiency of the organism. Selection of transformants in liquid medium led to a higher apparent yield of transformants (between 10(5) and 10(7) transformants per microg DNA). The methods developed here will pave the way for functional analysis of the various cellulosome components in vivo.

Study of chromosome rearrangements associated with the trpE26 mutation of Bacillus subtilis

Chromosome rearrangements involved in the formation of merodiploid strains in the Bacillus subtilis 168-166 system were explained by postulating the existence of intrachromosomal homology regions. This working hypothesis was tested by analysing sequences and restriction patterns of the, as yet uncharacterized, junctions between chromosome segments undergoing rearrangements in parent, 168 trpC2 and 166 trpE26, as well as in derived merodiploid strains. Identification, at the Ia/Ib chromosome junction of both parent strains, of a 1.3 kb segment nearly identical to a segment of prophage SPbeta established the existence of one of the postulated homology sequences. Inspection of relevant junctions revealed that a set of different homology regions, derived from prophage SPbeta, plays a key role in the formation of so-called trpE30, trpE30+, as well as of new class I merodiploids. Analysis of junctions involved in the transfer of the trpE26 mutation, i.e. simultaneous translocation of chromosome segment C and rotation of the terminal relative to the origin moiety of the chromosome, did not confirm the presence of any sequence suitable for homologous recombination. We propose a model involving simultaneous introduction of four donor DNA molecules, each comprising a different relevant junction, and their pairing with the junction regions of the recipient chromosome. The resolution of this structure, resting on homologous recombination, would confer the donor chromosome structure to the recipient, achieving some kind of 'transstamping'. In addition, a rather regular pattern of inverse and direct short sequence repeats in regions flanking the breaking points could be correlated with the initial, X-ray-induced, rearrangement.

Recombination enhancement by replication (RER) in Rhizobium etli

Studies in several organisms show that recombination and replication interact closely. Recombinational repair usually requires associated replication at some stage; moreover, additional replication can induce recombination through either homologous or illegitimate events. In prokaryotes, stimulation of recombination by replication is more dramatic when rolling circle replication is employed. In contrast, theta-type replication induces only a modest increase in recombination frequency. In this article, we show that induction of theta-type replication from a supernumerary origin in the symbiotic plasmid (pSym) of Rhizobium etli leads to a 1000-fold increase in deletion formation on this plasmid. These deletions span 120 kb (the symbiotic region) and have as endpoints the reiterated nitrogenase operons. We have named this phenomenon RER, for recombination enhancement by replication. RER is not affected by the position of the replication origin in the pSym, the direction of advance of the replication fork, or the distance from the origin to the recombining repeats. On the other hand, RER is dependent on an active recA allele, indicating that it is due to homologous recombination. RER displays a strong regionality restricted to the symbiotic region. The similarities and differences of RER with the recombination process observed at the terminus of replication of the Escherichia coli chromosome are discussed.

Cloning and sequencing of an alkaline protease gene from Bacillus lentus and amplification of the gene on the B. lentus chromosome by an improved technique

A gene encoding an alkaline protease was cloned from an alkalophilic bacillus, and its nucleotide sequence was determined. The cloned gene was used to increase the copy number of the protease gene on the chromosome by an improved gene amplification technique.

The N-acetylmuramoyl-L-alanine amidase encoded by the Bacillus subtilis 168 prophage SP beta

Heat shock of Bacillus subtilis CU1147, a strain lysogenic for SP beta c2, a prophage with a thermosensitive repressor, results in phage induction and subsequent cell lysis. Cloning in Escherichia coli and sequencing of a DNA fragment of prophage SP beta led to the identification of blyA, the gene encoding a 367 amino acid polypeptide with a molecular mass of 39.6 kDa. Purified BlyA obtained from the E. coli clone exhibited an N-acetylmuramoyl-L-alanine amidase activity. Insertional mutagenesis confirmed that the latter enzyme was associated with SP beta-phage-mediated cell lysis. Analysis of the neighbouring sequence suggested that the two ORFs immediately downstream of blyA and belonging to the same operon encode polypeptides which may be involved in the release of the endolysin. The presence on the chromosomes of B. subtilis or related Bacillus spp. of other, similar genes, and their possible relationship, is discussed.

Gene amplification and genomic plasticity in prokaryotes

Gene amplification is a common feature of the genome of prokaryotic organisms. In this review, we analyze different instances of gene amplification in a variety of prokaryotes, including their mechanisms of generation and biological role. Growing evidence supports the concept that gene amplification be considered not as a mutation but rather as a dynamic genomic state related to the adaptation of bacterial populations to changing environmental conditions or biological interactions. In this context, the potentially amplifiable DNA regions impose a defined dynamic structure on the genome. If such structure has indeed been selected during evolution, it is a particularly challenging hypothesis.

A highly efficient and stable system for site-specific integration of genes and plasmids into the phage phiLC3 attachment site (attB) of the Lactococcus lactis chromosome

An integration vector system based on the site-specific integration apparatus of the temperate lactococcal bacteriophage phiLC3 was developed. A 1.6-kb recombinogenic DNA cassette, containing the phiLC3 integrase gene (int) and the phage attachment site (attP), mediated site-specific integration of a single marker-gene, as well as of a replication-thermosensitive (-ts) plasmid (pINT2), into the phiLC3 attB site of Lactococcus lactis subsp. lactis LM0230 chromosome after introduction of the DNA into the cells by electroporation. Both the marker gene and the pINT2 plasmid were stably inserted as single copies in an orientation-specific and integrase-dependent manner, the pINT2-ts replicon being stably maintained at temperatures both permissive and non-permissive for plasmid-directed replication. Essentially all transformants obtained with the pINT2 plasmid appeared to be integrants, demonstrating the remarkably high efficiency of the system. This high efficiency rendered possible the detection of transformation-plus-integration events using DNA directly obtained from ligase reaction mixtures, thus avoiding initial subcloning in a non-lactococcal strain and subsequent cointegration of foreign replication functions into the chromosome of L. lactis. The above results, the observation that the phiLC3 attB site appear to be conserved in L. lactis, and the fact that the int-attP cassette functions efficiently in a non-phiLC3-host strain, show that the phiLC3 site-specific integration apparatus provides an efficient and 'food grade' tool for stable integration of genetic elements into the chromosome of L. lactis.

Inactivation of an aldehyde/alcohol dehydrogenase gene from Clostridium acetobutylicum ATCC 824

A nonreplicative plasmid containing an internal aad gene fragment has been integrated into the chromosome of Clostridium acetobutylicum ATCC 824. Transformation was accomplished by electroporation with relatively high concentrations of methylated plasmid DNA. Southern hybridization experiments revealed that integration occurred by single crossover homologous recombination inactivating the aad gene. Integrants were relatively stable after 25 generations. Inactivation of the aad gene drastically reduced solvent production. This result suggests that aldehyde/alcohol dehydrogenase(AAD) plays a important role in butanol production.

Efficient insertional mutagenesis in lactococci and other gram-positive bacteria

In lactococci, the study of chromosomal genes and their regulation is limited by the lack of an efficient transposon mutagenesis system. We associated the insertion sequence ISS1 with the thermosensitive replicon pG+ host to generate a mutagenic tool that can be used even in poorly transformable strains. ISS1 transposition is random in different lactococcal strains as well as in Enterococcus faecalis and Streptococcus thermophilus. High-frequency random insertion (of about 1%) obtained with this system in Lactococcus lactis allows efficient mutagenesis, with typically one insertion per cell. After ISS1 replicative transposition, the chromosome contains duplicated ISS1 sequences flanking pG+ host. This structure allows cloning of the interrupted gene. In addition, efficient excision of the plasmid leaves a single ISS1 copy at the mutated site, thus generating a stable mutant strain with no foreign markers. Mutants obtained by this transposition system are food grade and can thus be used in fermentation processes.

A new method for integration and stable DNA amplification in poorly transformable bacilli

We have developed a strategy for the integration and stable amplification of DNA sequences in the chromosome of poorly transformable bacilli, which avoids the presence of a functional plasmid replication system in the integrated DNA. The parental vector for integration contains two plus origins of replication from pUB110 in the same orientation on a single plasmid. Due to the direct repeats, such plasmids produce two individual progeny vectors, one of which is dependent on the other for replication, as it lacks a functional rep gene. We have used such a progeny vector system to integrate and amplify DNA on the chromosome of Bacillus licheniformis, and show that the structure is stable in the absence of selective pressure.

The gene of the N-acetylglucosaminidase, a Bacillus subtilis 168 cell wall hydrolase not involved in vegetative cell autolysis

lytD, the structural gene of the Bacillus subtilis 168 N-acetylglucosaminidase was localized at 310 degrees, next to the tagABC operon. Sequence analysis revealed a monocistronic operon encoding a 95.6 kDa protein endowed with an export signal, the cleavage of which yields the monomer polypeptide (92.8 kDa) of the dimeric active form of the enzyme. Transcription is initiated at a sigma-D (sigma D)-dependent promoter and ends at a terminator common to lytD and the divergently transcribed tagABC operon. In addition, we report the sequence of the adjacent upstream ORF, transcribed in the same direction as lytD, which shows significant homology to phosphomannose isomerase-encoding genes. Cell separation, motility, autolysis, cell wall turnover and growth were not affected in strains devoid of the N-acetylglucosaminidase. A mutant deficient in the two most abundant autolysins, i.e. the LytC amidase and the glucosaminidase, exhibited the phenotype of the amidase-deficient strains, revealing their non-requirement for growth. This conclusion raises two fundamental questions: how does the cell undo the highly cross-linked peptidoglycan so as to be able to grow, and what is the role of the considerable amount of autolysin normally present? Possible answers to these questions are discussed.

The Lactococcus lactis sex-factor aggregation gene cluA

A gene, cluA, was cloned from the chromosomally located sex factor of Lactococcus lactis MG1363. Sequence analysis revealed significant homology with previously described aggregation proteins in Enterococcus and Streptococcus species. The possibility that cluA was an equivalent protein involved in cell aggregation between donor and recipient bacteria during lactococcal conjugation was confirmed by its expression under the control of a heterologous promoter in L. lactis. Analysis of the homology between the CluA protein and the related proteins of Enterococcus and Streptococcus allowed a common structure for these proteins to be postulated. This consisted of five domains. Functionally conserved domains I and V act respectively as a secretory leader and C-terminal membrane anchor. Domains II and IV are conserved at the amino acid level and probably have common structural roles whereas domain III is variable and may control binding specificity.

Isolation of a Degeneration-Resistant Mutant of Clostridium acetobutylicum NCIMB 8052

Unless periodically grown from germinated spores, Clostridium acetobutylicum tends to degenerate (that is, to spontaneously lose the capacity both to produce solvents and to develop into spores). To obtain mutants that are deficient in degeneration, C. acetobutylicum NCIMB 8052 was mated with Enterococcus faecalis BM4110 harboring transposon Tn 1545 . We developed a degeneration resistance assay based on a secondary effect of degeneration, the production of toxic levels of acetic and butyric acids. Erythromycin-resistant transconjugant clones were tested individually for longevity by repeated and timely subculturing. One long-lived mutant, A10, survived 18 ± 3 transfers (mean ± standard deviation; n = 20) before extinction, while the wild type (parental cells) survived 6.6 ± 1.5 transfers ( n = 11). The three-fold difference in longevity is statistically significant. In a batch culture in a rich medium, the wild-type cells degenerated within 24 h after inoculation with 1% of an overnight culture derived from germinated spores. In contrast, A10 cells were able to switch to solventogenesis and to sporulate. In a minimal medium with greater buffering capacity, both cell types produced solvents and spores. Southern blots of Eco RI and Hin dIII restriction digests of A10 chromosomal DNA (but not parental DNA) showed that only one copy of Tn 1545 was inserted into the clostridial chromosome. Our findings are consistent with the hypothesis that there was an alteration at a regulatory locus that was effected by the insertion of the transposon.

Integration of repeated sequences (pBR322) in the Bacillus subtilis 168 chromosome without affecting the genome structure

The Escherichia coli plasmid pBR322 sequence (4363 bp) was integrated at the met, pro, or leuB locus of the Bacillus subtilis chromosome without duplication of the flanking chromosomal regions. The integrated pBR322 was stably maintained as part of the chromosome regardless of its orientation or location. It was found that a DNA segment as large as 17 kb cloned in pBR322 can be readily transferred to the B. subtilis chromosome by transformation. It was demonstrated that a second pBR322 sequence could be effectively introduced at different regions of the chromosome by sequential transformation using chromosomal DNA isolated from a strain that had already acquired a pBR322 sequence at a different locus. Similarly, a third pBR322 sequence could be introduced. By this method, two or three pBR322 sequences can be incorporated at unlinked loci without affecting the overall structure of the B. subtilis genome.

Gene replacement in Lactobacillus helveticus

An efficient method for gene replacement in Lactobacillus helveticus CNRZ32 was developed by utilizing pSA3 as an integration vector. This plasmid is stably maintained in CNRZ32 at 37 degrees C but is unstable at 45 degrees C. This method consisted of a two-step gene-targeting technique: (i) chromosomal integration of a plasmid carrying an internal deletion in the gene of interest via homologous recombination and (ii) excision of the vector and the wild-type gene via homologous recombination, resulting in gene replacement. By using this procedure, the chromosomal X-prolyl dipeptidyl aminopeptidase gene (pepXP) of CNRZ32 was successfully inactivated.

High-efficiency gene inactivation and replacement system for gram-positive bacteria

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.

Evidence that the spoIIM gene of Bacillus subtilis is transcribed by RNA polymerase associated with sigma E

We have investigated the temporal and spatial regulation of spoIIM, a gene of Bacillus subtilis whose product is required for complete septum migration and engulfment of the forespore compartment during sporulation. The spoIIM promoter was found to become active about 2 h after the initiation of sporulation. The effects of mutations on the expression of a spoIIM-lacZ fusion were most consistent with its utilization by sigma-E-associated RNA polymerase (E sigma E). A unique 5' end of the in vivo spoIIM transcript was detected by primer extension analysis and was determined to initiate at the appropriate distance from a sequence conforming very closely to the consensus for genes transcribed by E sigma E. A partially purified preparation of E sigma E produced a transcript in vitro that initiated at the same nucleotide as the primer extension product generated from in vivo RNA. Ectopic induction of sigma E synthesis during growth resulted in the immediate and strong expression of a spoIIM-lacZ fusion, but an identical fusion was completely unresponsive to induced synthesis of either sigma F or sigma G under similar conditions. The results of plasmid integration-excision experiments in which the spoIIM gene was reversibly disrupted by a temperature-sensitive integrational vector suggested that spoIIM expression is required in the forespore compartment, but direct examination of subcellular fractions enriched for mother cell or forespore material indicated that spoIIM expression cannot be confined to the forespore. We conclude that spoIIM is a member of the sigma E regulon and that it may be transcribed exclusively by E sigma E. We discuss the implications of this conclusion for models in which activation of sigma E in the mother cell is proposed to be a part of the mechanism responsible for initiating separate programs of gene activity in the two sporangium compartments.

Intramolecular homologous recombination in Bacillus subtilis 168

Plasmid resolution from a phage::plasmid chimera was used to measure directly intramolecular recombination in Bacillus subtilis. The system is based on a sigma-replicating plasmid (pC194) cloned into a dispensable region of the lytic bacteriophage SPP1. The plasmid, which confers chloramphenicol resistance, is resolved when SPP1::pC194 phages infect B. subtilis cells, provided the chimera carries a functional, intact copy of the plasmid repH gene. Intramolecular homologous recombination was independent of the RecA and RecL-RecR functions, but dependent on RecF, RecB, RecG, RecP, RecH and AddAB functions. These results are consistent with the hypothesis that B. subtilis has multiple pathways for genetic recombination and allow us to tentatively place the recB and recG genes into a new epistatic group epsilon.

Efficiency of homologous intermolecular recombination at different locations on the Bacillus subtilis chromosome

The efficiencies of intermolecular recombination at 12 different locations on the Bacillus subtilis chromosome were determined by transforming competent cells with a nonreplicative plasmid. The efficiencies varied by only about threefold but were significantly different (P less than 0.05 by a chi-square test) for approximately 20% of the locations. The recA gene product is required for recombination, and the addA gene product appears to affect the variation in a site-specific way.

New thermosensitive plasmid for gram-positive bacteria

We isolated a replication-thermosensitive mutant of the broad-host-range replicon pWV01. The mutant pVE6002 is fully thermosensitive above 35 degrees C in both gram-negative and gram-positive bacteria. Four clustered mutations were identified in the gene encoding the replication protein of pVE6002. The thermosensitive derivative of the related plasmid pE194 carries a mutation in the analogous region but not in the same position. Derivatives of the thermosensitive plasmid convenient for cloning purposes have been constructed. The low shut-off temperature of pVE6002 makes it a useful suicide vector for bacteria which are limited in their own temperature growth range. Using pVE6002 as the delivery vector for a transposon Tn10 derivative in Bacillus subtilis, we observed transposition frequencies of about 1%.

Identification of the structural genes for N-acetylmuramoyl-L-alanine amidase and its modifier in Bacillus subtilis 168: inactivation of these genes by insertional mutagenesis has no effect on growth or cell separation

The region of the Bacillus subtilis 168 chromosome that contains the structural genes for the major vegetative cell autolysin, (N-acetyl-muramoyl-L-alanine amidase), and its modifier protein has been cloned. Insertional mutagenesis with integrative plasmids carrying small DNA fragments from this region has revealed that both genes are located on a 4 kb fragment; they are organised in one transcription unit, the modifier being transcribed first. Studies of derivatives in which either the amidase or the modifier or both proteins are inactivated have revealed that amidase-deficient strains are not affected in growth, cell separation, transformability or sporulation. Observed phenotypic differences were altered kinetics of, cell wall turn-over and a reduced rate of, autolysis of native cell wall preparations. A residual amidase activity, about 3% of that of the wild-type strain, was found in strains devoid of the major amidase. A new, distinct cell wall-bound protein, designated CWBP49', with the same molecular weight as the amidase, was identified in mutants devoid of the latter enzyme.

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.

Lactococcal plasmid pWV01 as an integration vector for lactococci

A Bacillus subtilis strain was constructed that contained the repA gene of the lactococcal plasmid pWVO1 in its chromosome. This strain was used to construct the pWVO1-based integration vector pINT1, which lacked the repA gene. The 3.6-kb plasmid pINT1 was not able to replicate in Lactococcus lactis MG1363 but integrated into the chromosome via a Campbell-like mechanism when a lactococcal chromosomal DNA fragment was incorporated in the plasmid. Transformants were obtained that carried between one and four plasmid copies, in stable tandem arrangement on the chromosome. The results indicate that pWVO1 can be used for the development of a Campbell-like integration system fully derived of lactococcal DNA, with which stable multiple copies of any gene of interest can be generated in the lactococcal chromosome.

Genetic manipulation of Bacillus amyloliquefaciens

Application of modern gene technology to strain improvement of the industrially important bacterium Bacillus amyloliquefaciens is reported. Several different plasmid constructions carrying the alpha-amylase gene (amyE) from B. amyloliquefaciens were amplified in this species either extrachromosomally or intrachromosomally. The amyE gene cloned on a pUB110-derived high copy plasmid pKTH10 directed the highest yields both in rich laboratory medium and in crude industrial medium. The alpha-amylase activity, when compared with the parental strain, was enhanced up to 20-fold in the pKTH 10 transformant. This strain showed decreased activities for other exoenzymes, such as proteases and beta-glucanase suggesting common limiting resources in the processing of these enzymes. Deletions were made in vitro in genes encoding neutral (nprE), alkaline (aprE) protease and beta-glucanase (bglA). The engineered genes were cloned into the thermosensitive plasmid pE194, and the resulting plasmids were used to replace the corresponding wild type chromosomal genes in B. amyloliquefaciens by integration-excision at non-permissive temperature. The double mutant deficient in the major proteases (delta nprE delta aprE) showed about a 2-fold further enhancement in alpha-amylase production in the industrial medium compared with the relevant wild type background, [corrected] both when plasmid-free and when transformed with pKTH10; this strain also produced elevated levels of the chromosomally-encoded beta-glucanase; pKTH10 was stably maintained both in the wild type strain and in the delta nprE delta aprE mutant. We suggest that the higher yields in alpha-amylase and beta-glucanase in the delta nprE delta aprE strain are primarily due to improved access to limiting resources, and that decreased proteolytic degradation may have had a secondary role in retaining the high activity obtained.

Genetic analysis of fusion recombinants in Bacillus subtilis: function of the recE gene

Bacillus subtilis protoplast fusion allows the study of the genetic recombination of an entire procaryotic genome. Protoplasts from bacterial strains marked genetically by chromosomal mutations were fused using polyethylene glycol and the regenerated cells analyzed. Recombinants represent 19.3% of heterozygotic cells; they are haploids. Individual characterization of clones show a unique particular phenotype in each colony suggesting that recombination takes place immediately after fusion, probably before the first cellular division. Recombination occurs in the whole chromosome; in one-third of the cases both reciprocal recombinants could be shown in the colony. The genetic interval that includes the chromosome replication origin shows the highest recombination level. Our results suggest that the RecE protein accounts for most of the fused protoplast recombination; however, some "replication origin-specific" recombination events were independent of the recE gene product.

Hypersecretion of a cellulase from Clostridium thermocellum in Bacillus subtilis by induction of chromosomal DNA amplification

We have inserted a DNA fragment composed of (i) the promoter and the export signal of the Bacillus subtilis levansucrase gene; (ii) the sequence encoding the mature part of the Clostridium thermocellum endoglucanase A gene in a specific site of the B. subtilis chromosome. The insert was flanked by directly repeated pBR322 sequences of 3.9 kb. Plasmid pE194, which has a thermosensitive replication, was integrated adjacent to one of the repeats. When the integrated plasmid was allowed to replicate, the insert and one of the repeats was amplified up to a level of about 250 copies per chromosome. Endoglucanase A was efficiently synthesized in, and secreted from, cells containing the amplified structure, since the heterologous fusion protein was the major extracellular protein in a B. subtilis sacUh strain. The NH2-terminal sequence of the secreted protein revealed three different cleavage sites in the vicinity of the signal peptidase recognition sequence.

Stability of Integrated Plasmids in the Chromosome of Lactococcus lactis

Derivatives of plasmids pBR322, pUB110, pSC101, and pTB19, all containing an identical fragment of lactococcal chromosomal DNA, were integrated via a Campbell-like mechanism into the same chromosomal site of Lactococcus lactis MG1363, and the transformants were analyzed for the stability of the integrated plasmids. In all cases the erythromycin resistance gene of pE194 was used as a selectable marker. Transformants obtained by integration of the pBR322 derivatives contained a head-to-tail arrangement of several plasmid copies, which most likely was caused by integration of plasmid multimers. Single-copy integrations were obtained with the pSC101 and pTB19 derivatives. In all of these transformants no loss of the erythromycin gene was detected during growth for 100 generations in the absence of the antibiotic. In contrast, transformants containing integrated amplified plasmid copies of pUB110 derivatives were unstable under these conditions. Since pUB110 appeared to have replicative activity in L. lactis , we suggest that this activity destabilized the amplified structures in L. lactis.

Plus-origin mapping of single-stranded DNA plasmid pE194 and nick site homologies with other plasmids

Staphylococcus aureus plasmid pE194 manifests a natural thermosensitivity for replication and can be established in several species, both gram positive and gram negative, thus making it attractive for use as a delivery vector. Like most characterized plasmids of gram-positive bacteria, pE194 generates single-stranded DNA. The direction of pE194 replication is clockwise, as determined by the strandedness of free single-stranded DNA. Significant homology exists between a 50-base-pair sequence in the origin of pE194 and sequences present in plasmids pMV158 (Streptococcus agalactiae), pADB201 (Mycoplasma mycoides), and pSH71 (Lactococcus lactis). We used an initiation-termination reaction, in which pE194 initiates replication at its own origin and is induced to terminate at the related pMV158 sequence, to demonstrate that pE194 replicates by a rolling-circle mechanism; the initiation nick site was localized to an 8-base-pair sequence.

Structurally stable Bacillus subtilis cloning vectors

Cloning of long DNA segments (greater than 5 kb) in Bacillus subtilis is often unsuccessful when naturally occurring small (less than 10 kb) plasmids are used as vectors. In this work we show that vectors derived from the large (26.5 kb) plasmids pAM beta 1 and pTB19 allow efficient cloning and stable maintenance of long DNA segments (up to 33 kb). The two large plasmids differ from the small ones in several ways. First, replication of the large plasmids does not lead to accumulation of detectable amounts of ss DNA, whereas the rolling-circle replication typical for small plasmids does. In addition, the replication regions of the two large plasmids share no sequence homology with the corresponding regions of the known small plasmids, which are highly conserved. Taken together, these observations suggest that the mode of replication of the large plasmids is different from that of small plasmids. Second, short repeated sequences recombine much less frequently when carried on large than on small plasmids. This indicates that large plasmids are structurally much more stable than small ones. We suggest that the high structural stability of large plasmids is a consequence of their mode of replication and that plasmids which do not replicate as rolling circles should be used whenever it is necessary to clone and maintain long DNA segments in any organism.

Transfer of Tn1545 and Tn916 to Clostridium acetobutylicum

Tn1545, a conjugative transposon originally discovered in Streptococcus pneumoniae, has been transferred from Enterococcus faecalis and Bacillus subtilis to Clostridium acetobutylicum NCIB 8052. Transfer between different strains of C. acetobutylicum has also been observed. Insertion of Tn1545 into the C. acetobutylicum chromosome occurred at multiple sites, as shown by Southern hybridization. Although ermAM (erythromycin-resistance) was the most satisfactory marker for primary selection of transconjugants, all three Tn1545-encoded antibiotic resistance genes (aphA-3, ermAM, and tetM) were apparently expressed in C. acetobutylicum. Our results indicate that Tn1545 is potentially useful for undertaking mutagenesis and mutational cloning in this industrially important organism. Transfer of another conjugative transposon, Tn916, from E. faecalis to C. acetobutylicum NCIB 8052 was also apparently detected. Circumstantial evidence suggests that there may be a hot spot for Tn916 insertion in the C. acetobutylicum NCIB 8052 chromosome.

The family of highly interrelated single-stranded deoxyribonucleic acid plasmids

Many plasmids from gram-positive bacteria replicate via a single-stranded deoxyribonucleic acid (ssDNA) intermediate, most probably by a rolling-circle mechanism (these plasmids are referred to in this paper as ssDNA plasmids). Their plus and minus origins are physically separated, and replicative initiations are not simultaneous; it is this feature that allows visualization of ssDNA replication intermediates. The insertion of foreign DNA into an ssDNA plasmid may provoke a high frequency of deletions, changes of replicative products to high-molecular-weight forms, segregational loss, and decreased plasmid copy numbers. When an ssDNA plasmid is inserted into the chromosome, both deletions and amplifications may be induced. Both the mode of replication and the copy control mechanism affect the fate of inserted foreign material, usually selecting for its loss. Thus, after having tasted various morsels of DNA, the resulting plasmid stays trim. The features of the ssDNA plasmids seem to be beneficial for their viability and propagation, but not for their use as cloning vectors. However, plasmids replicating via ssDNA intermediates are being exploited to yield insights into the mechanisms of recombination and amplification.

Stability of reiterated sequences in the Bacillus subtilis chromosome

The instability of reiterated sequences in the Bacillus subtilis chromosome that was previously reported (M. Young, J. Gen. Microbiol. 130:1613-1621, 1984) results from the presence of a truncated pC194 replication origin together with an intact replication protein A gene in the amplified DNA. Removal of the truncated pC194 replication origin or inactivation of replication protein A stabilizes reiterated sequences, whereas provision of replication protein A in trans destabilizes them. We suggest that residual activity of protein A at the truncated replication origin generates single-stranded DNA, which stimulates recombination between repeated sequences and thus destabilizes amplified structures.

The essential nature of teichoic acids in Bacillus subtilis as revealed by insertional mutagenesis

A 30 kb DNA segment from the region of the Bacillus subtilis strain 168 chromosome which contains most, if not all, loci specifically involved in teichoic acid biosynthesis, has been cloned. A restriction map was established to which genetic markers were assigned. Four loci, tagA, tagB, gtaA and gtaD, are located on a DNA segment of about 7 kb, whereas the gtaB locus lies some 10 kb distant. The tagA and tagB loci are apparently transcribed independently. Insertional mutagenesis, using integrational plasmids carrying relevant fragments from the tag region, provides strong evidence that biosynthesis of polyglycerol phosphate [poly(groP)], so far largely considered as a dispensable polymer, is in fact essential for growth.