Functional organization of the plasmid pT181 replication origin

A Bacillus thuringiensis Chitin-Binding Protein is Involved in Insect Peritrophic Matrix Adhesion and Takes Part in the Infection Process

Bacillus thuringiensis (Bt) is used for insect pest control, and its larvicidal activity is primarily attributed to Cry toxins. Other factors participate in infection, and limited information is available regarding factors acting on the peritrophic matrix (PM). This study aimed to investigate the role of a Bt chitin-binding protein (CBPA) that had been previously shown to be expressed at pH 9 in vitro and could therefore be expressed in the alkaline gut of lepidopteron larvae. A ∆cbpA mutant was generated that was 10-fold less virulent than wild-type Bt HD73 towards Ostrinia furnacalis neonate larvae, indicating its important role in infection. Purified recombinant Escherichia coli CBPA was shown to have a chitin affinity, thus indicating a possible interaction with the chitin-rich PM. A translational GFP-CBPA fusion elucidated the localization of CBPA on the bacterial surface, and the transcriptional activity of the promoter PcbpA was immediately induced and confirmed at pH 9. Next, in order to connect surface expression and possible in vivo gut activity, last instar Galleria mellonella (Gm) larvae (not susceptible to Bt HD-73) were used as a model to follow CBPA in gut expression, bacterial transit, and PM adhesion. CBPA-GFP was quickly expressed in the Gm gut lumen, and more Bt HD73 strain bacteria adhered to the PM than those of the ∆cbpA mutant strain. Therefore, CBPA may help to retain the bacteria, via the PM binding, close to the gut surface and thus takes part in the early steps of Bt gut interactions.

Novel Cell Wall Hydrolase CwlC from Bacillus thuringiensis Is Essential for Mother Cell Lysis

In this study, a sporulation-specific gene (tentatively named cwlC) involved in mother cell lysis in Bacillus thuringiensis was characterized. The encoded CwlC protein consists of an N-terminal N-acetylmuramoyl-l-alanine amidase (MurNAc-LAA) domain and a C-terminal amidase02 domain. The recombinant histidine-tagged CwlC proteins purified from Escherichia coli were able to directly bind to and digest the B. thuringiensis cell wall. The CwlC point mutations at the two conserved glutamic acid residues (Glu-24 and Glu-140) shown to be critical for the catalytic activity in homologous amidases resulted in a complete loss of cell wall lytic activity, suggesting that CwlC is an N-acetylmuramoyl-l-alanine amidase. Results of transcriptional analyses indicated that cwlC is transcribed as a monocistronic unit and that its expression is dependent on sporulation sigma factor K (σ^K). Deletion of cwlC completely blocked mother cell lysis during sporulation without impacting the sporulation frequency, Cry1Ac protein production, and insecticidal activity. Taken together, our data suggest that CwlC is an essential cell wall hydrolase for B. thuringiensis mother cell lysis during sporulation. Engineered B. thuringiensis strains targeting cwlC, which allows the crystal inclusion to remain encapsulated in the mother cell at the end of sporulation, may have the potential to become more effective biological control agents in agricultural applications since the crystal inclusion remains encapsulated in the mother cell at the end of sporulation.IMPORTANCE Mother cell lysis has been well studied in Bacillus subtilis, which involves three distinct yet functionally complementary cell wall hydrolases. In this study, a novel cell wall hydrolase, CwlC, was investigated and found to be essential for mother cell lysis in Bacillus thuringiensis CwlC of B. thuringiensis only shows 9 and 21% sequence identity with known B. subtilis mother cell hydrolases CwlB and CwlC, respectively, suggesting that mechanisms of mother cell lysis may differ between B. subtilis and B. thuringiensis The cwlC gene deletion completely blocked the release of spores and crystals from the mother cell without affecting insecticidal activity. This may provide a new effective strategy for crystal encapsulation against UV light inactivation.

Force and twist dependence of RepC nicking activity on torsionally-constrained DNA molecules

Many bacterial plasmids replicate by an asymmetric rolling-circle mechanism that requires sequence-specific recognition for initiation, nicking of one of the template DNA strands and unwinding of the duplex prior to subsequent leading strand DNA synthesis. Nicking is performed by a replication-initiation protein (Rep) that directly binds to the plasmid double-stranded origin and remains covalently bound to its substrate 5′-end via a phosphotyrosine linkage. It has been proposed that the inverted DNA sequences at the nick site form a cruciform structure that facilitates DNA cleavage. However, the role of Rep proteins in the formation of this cruciform and the implication for its nicking and religation functions is unclear. Here, we have used magnetic tweezers to directly measure the DNA nicking and religation activities of RepC, the replication initiator protein of plasmid pT181, in plasmid sized and torsionally-constrained linear DNA molecules. Nicking by RepC occurred only in negatively supercoiled DNA and was force- and twist-dependent. Comparison with a type IB topoisomerase in similar experiments highlighted a relatively inefficient religation activity of RepC. Based on the structural modeling of RepC and on our experimental evidence, we propose a model where RepC nicking activity is passive and dependent upon the supercoiling degree of the DNA substrate.

Functional characterization of the origin of replication of pRN1 from Sulfolobus islandicus REN1H1

Plasmid pRN1 from Sulfolobus islandicus REN1H1 is believed to replicate by a rolling circle mechanism but its origin and mechanism of replication are not well understood. We sought to create minimal expression vectors based on pRN1 that would be useful for heterologous gene expression in S. acidocaldarius, and in the process improve our understanding of the mechanism of replication. We constructed and transformed shuttle vectors that harbored different contiguous stretches of DNA from pRN1 into S. acidocaldarius E4-39, a uracil auxotroph. A 232-bp region 3’ of orf904 was found to be critical for pRN1 replication and is therefore proposed to be the putative origin of replication. This 232-bp region contains a 100-bp stem-loop structure believed to be the double-strand origin of replication. The loop of the 100-bp structure contains a GTG tri-nucleotide motif, a feature that was previously reported to be important for the primase activity of Orf904. This putative origin and the associated orf56 and orf904 were identified as the minimal replicon of pRN1 because transformants of plasmids lacking any of these three features were not recovered. Plasmids lacking orf904 and orf56 but harboring the putative origin were transformable when orf904 and orf56 were provided in-trans; a 75-bp region 5’ of the orf904 start codon was found to be essential for this complementation. Detailed knowledge of the pRN1 origin of replication will broaden the application of the plasmid as a genetic tool for Sulfolobus species.

Transcriptional regulation and characteristics of a novel N-acetylmuramoyl-L-alanine amidase gene involved in Bacillus thuringiensis mother cell lysis

In Bacillus thuringiensis, a novel N-acetylmuramoyl-L-alanine amidase gene (named cwlB) was detected, and the CwlB protein was purified and characterized. Reverse transcription-PCR (RT-PCR) results indicated that cwlB and an upstream gene (named cwlA) formed one transcriptional unit. 5' rapid amplification of cDNA ends (5'-RACE)-PCR and transcriptional fusions with the lacZ gene indicated that transcription of the operon was directed by a promoter, P(cwlA), which is located upstream from the cwlA gene and that the transcription start site is a single 5'-end nucleotide residue T located 25 nucleotides (bp) upstream from the cwlA translational start codon. Moreover, the activity of P(cwlA) was controlled by σ(K). Morphological analysis suggested that the mutation of cwlB could delay spore release compared to the timing of spore release in the wild-type strain. Western blot assay demonstrated that purified CwlB bound to the B. thuringiensis cell wall. Observations with laser confocal microscopy and a green fluorescent protein-based reporter system demonstrated that the CwlB protein localizes to the cell envelope. All results suggest that the CwlB protein is involved in mother cell lysis in B. thuringiensis.

PcrA helicase tightly couples ATP hydrolysis to unwinding double-stranded DNA, modulated by the initiator protein for plasmid replication, RepD

The plasmid replication initiator protein, RepD, greatly stimulates the ability of the DNA helicase, PcrA, to unwind plasmid lengths of DNA. Unwinding begins at oriD, the double-stranded origin of replication that RepD recognizes and covalently binds to initiate replication. Using a combination of plasmids containing oriD and oligonucleotide structures that mimic parts of oriD, the kinetics of DNA nicking and separation have been determined, along with the coupling ratio between base separation and ATP hydrolysis. At 30 °C, the rate of nicking is 1.0 s⁻¹, and translocation is ∼30 bp s⁻¹. During translocation, the coupling ratio is one ATP hydrolyzed per base pair separated, the same as the value previously reported for ATP hydrolyzed per base moved by PcrA along single-stranded DNA. The data suggest that processivity is high, such that several thousand base-pair plasmids are unwound by a single molecule of PcrA. In the absence of RepD, a single PcrA is unable to separate even short lengths (10 to 40 bp) of double stranded DNA.

Small rolling circle plasmids in Bacillus subtilis and related species: Organization, distribution, and their possible role in host physiology

Bacillus subtilis and related species (Bacillus licheniformis, Bacillus pumilus, Bacillus amyloliquefaciens, and Bacillus mojavensis) represent a group of bacteria largely studied and widely employed by industry. Small rolling circle replicating plasmids of this group of bacteria have been intensively studied as they represent a convenient model for genetic research and for the construction of molecular tools for the genetic modification of their hosts. Through the computational analysis of the available plasmid sequences to date, the first part of this review focuses on the main stages that the present model for rolling circle replication involves, citing the research data which helped to elucidate the mechanism by which these molecules replicate. Analysis of the distribution and phylogeny of the small RC plasmids inside the Bacillus genus is then considered, emphasizing the low level of diversity observed among these plasmids through the in silico analysis of their organization and the sequence divergence of their replication module. Finally, the parasitic vs. mutualistic nature of small rolling circle plasmids is briefly discussed.

Plasmid rolling-circle replication: highlights of two decades of research

This review provides a historical perspective of the major findings that contributed to our current understanding of plasmid rolling-circle (RC) replication. Rolling-circle-replicating (RCR) plasmids were discovered approximately 20 years ago. The first of the RCR plasmids to be identified were native to Gram-positive bacteria, but later such plasmids were also identified in Gram-negative bacteria and in archaea. Further studies revealed mechanistic similarities in the replication of RCR plasmids and the single-stranded DNA bacteriophages of Escherichia coli, although there were important differences as well. Three important elements, a gene encoding the initiator protein, the double strand origin, and the single strand origin, are contained in all RCR plasmids. The initiator proteins typically contain a domain involved in their sequence-specific binding to the double strand origin and a domain that nicks within the double strand origin and generates the primer for DNA replication. The double strand origins include the start-site of leading strand synthesis and contain sequences that are bound and nicked by the initiator proteins. The single strand origins are required for synthesis of the lagging strand of RCR plasmids. The single strand origins are non-coding regions that are strand-specific, and contain extensive secondary structures. This minireview will highlight the major findings in the study of plasmid RC replication over the past twenty years. Regulation of replication of RCR plasmids will not be included since it is the subject of another review.

DNA–Protein Interactions during the Initiation and Termination of Plasmid pT181 Rolling-Circle Replication

Initiation of DNA replication requires the generation of a primer at the origin of replication that can be utilized by a DNA polymerase for DNA synthesis. This can be accomplished by several means, including the synthesis of an RNA primer by a DNA primase or RNA polymerase, by nicking of one strand of the DNA to generate a free 3'-OH end that can be used as a primer, and by the utilization of the OH group present in an amino acid such as serine within an initiation protein as a primer. Furthermore, some single-stranded DNA genomes can utilize a snap-back 3'-OH end generated due to self-complementarity as a primer for DNA replication. The different modes of initiation require the generation of highly organized DNA-protein complexes at the origin that trigger the initiation of replication. A large majority of small, multicopy plasmids of Gram-positive bacteria and some of Gram-negative bacteria replicate by a rolling-circle (RC) mechanism (for previous reviews, see Refs.). More than 200 rolling-circle replicating (RCR) plasmids have so far been identified and, based on sequence homologies in their replication regions, can be grouped into approximately seven families (Refs., and http://www.essex.ac.uk/bs/staff/osborn/DPR-home.htm). This review will focus on plasmids of the pT181 family that replicate by an RC mechanism. So far, approximately 25 plasmids have been identified as belonging to this family based on the sequence homology in their double-strand origins (dsos) and the genes encoding the initiator (Rep) proteins. This review will highlight our current understanding of the structural features of the origins of replication, and the DNA-protein and protein-protein interactions that result in the generation of a replication-initiation complex that triggers replication. It will discuss the molecular events that result in the precise termination of replication once the leading-strand DNA synthesis has been completed. This review will also discuss the various biochemical activities of the initiator proteins encoded by the plasmids of the pT181 family and the mechanism of inactivation of the Rep activity after supporting one round of leading-strand replication. Finally, the review will outline the mechanism of replication of the lagging strand of the pT181 plasmid as well as the limited information that is available on the role of host proteins in pT181 leading- and lagging-strand replication.

Role of the double-strand origin cruciform in pT181 replication

pT181 is a small rolling-circle plasmid from Staphylococcus aureus whose initiator protein, RepC, melts the plasmid's double-strand origin (DSO) and extrudes a cruciform involving IR II, a palindrome flanking the initiation nick site. We have hypothesized that the cruciform is required for initiation, providing a single-stranded region for the assembly of the replisome (R. Jin et al., 1997, EMBO J. 16, 4456-4566). In this study, we have tested the requirement for cruciform extrusion by disrupting the symmetry of the IR II palindrome or by increasing its length. The modified DSOs were tested for replication with RepC in trans. Rather surprisingly, disruption of the IR II symmetry had no detectable effect on replication or on competitivity of the modified DSO, though plasmids with IR II disrupted were less efficiently relaxed than the wild type by RepC. However, in conjunction with IR II disruption, modification of the tight RepC binding site IR III blocked replication. These results define two key elements of the pT181 initiation mechanism--the IR II conformation and the RepC binding site (IR III)--and they indicate that pT181 replication initiation is sufficiently robust to be able to compensate for significant modifications in the configuration of the DSO.

Rapid method for the identification of essential genes in Staphylococcus aureus

A strategy based on a vector host-dependent for autonomous replication, pSA3182, was utilized both for the rapid screening for Staphylococcus aureus genes essential for cell viability and for the introduction of specific polarity-neutral deletions in nonessential genes. The results obtained support the use of pSA3182 for both purposes.

Rolling-circle replication of bacterial plasmids

Many bacterial plasmids replicate by a rolling-circle (RC) mechanism. Their replication properties have many similarities to as well as significant differences from those of single-stranded DNA (ssDNA) coliphages, which also replicate by an RC mechanism. Studies on a large number of RC plasmids have revealed that they fall into several families based on homology in their initiator proteins and leading-strand origins. The leading-strand origins contain distinct sequences that are required for binding and nicking by the Rep proteins. Leading-strand origins also contain domains that are required for the initiation and termination of replication. RC plasmids generate ssDNA intermediates during replication, since their lagging-strand synthesis does not usually initiate until the leading strand has been almost fully synthesized. The leading- and lagging-strand origins are distinct, and the displaced leading-strand DNA is converted to the double-stranded form by using solely the host proteins. The Rep proteins encoded by RC plasmids contain specific domains that are involved in their origin binding and nicking activities. The replication and copy number of RC plasmids, in general, are regulated at the level of synthesis of their Rep proteins, which are usually rate limiting for replication. Some RC Rep proteins are known to be inactivated after supporting one round of replication. A number of in vitro replication systems have been developed for RC plasmids and have provided insight into the mechanism of plasmid RC replication.

How rolling circle plasmids control their copy number

Rolling circle DNA replication is inherently continuous and unregulated. This 'go-for-broke' strategy works well for lytic phages but is suicidal for plasmids that must coexist with their host. Plasmids have consequently evolved elaborate copy number control systems that operate at the transcriptional, translational and post-translational levels.

The inactivated plasmid inititator protein RepC/RepC* may have a regulatory role

During replication of the plasmid pT181, the initiator protein RepC is modified by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. Here we show that during in vitro replication, RepC* is radioactively labeled, suggesting that the source of the RepC* oligodeoxynucleotide is the newly synthesized pT181 DNA. The RepC/RepC* heterodimer retains its ability to bind the pT181 double-strand origin and, therefore, it may act as a competitive inhibitor of the RepC homodimer during replication.

The inactive pT181 initiator heterodimer, RepC/C, binds but fails to induce melting of the plasmid replication origin

Staphylococcus aureus plasmid pT181 replicates via a rolling circle mechanism. The synthesis of the pT181 initiator protein (RepC) is regulated by antisense RNAs, and RepC is inactivated after usage by the attachment of an oligonucleotide to one of its subunits. The inactivated heterodimeric RepC/C* has been shown be unable to initiate replication in vitro (Rasooly, A., and Novick, R. P. (1993) Science 262, 1048-1050). The inactive RepC/C* has been found to be very stable and constitute about 90-95% of the total RepC antigen inside the cell. We studied the specific interaction of the RepC/C and RepC/C* complex with the pT181 double strand origin. The results indicated that RepC/C and RepC/C* footprint supercoiled DNA differently although their footprints on linear DNA are similar; we also find that RepC/C is able to enhance cruciform extrusion while RepC/C* cannot. RepC/C* binds and bends the double strand origin much more weakly than does RepC/C. These results suggest that the attached oligonucleotide induces a conformational change in the RepC/C* molecule that is responsible for its lack of activity.

Inverted repeats, stem-loops, and cruciforms: significance for initiation of DNA replication

Inverted repeats occur nonrandomly in the DNA of most organisms. Stem-loops and cruciforms can form from inverted repeats. Such structures have been detected in pro- and eukaryotes. They may affect the supercoiling degree of the DNA, the positioning of nucleosomes, the formation of other secondary structures of DNA, or directly interact with proteins. Inverted repeats, stem-loops, and cruciforms are present at the replication origins of phage, plasmids, mitochondria, eukaryotic viruses, and mammalian cells. Experiments with anti-cruciform antibodies suggest that formation and stabilization of cruciforms at particular mammalian origins may be associated with initiation of DNA replication. Many proteins have been shown to interact with cruciforms, recognizing features like DNA crossovers, four-way junctions, and curved/bent DNA of specific angles. A human cruciform binding protein (CBP) displays a novel type of interaction with cruciforms and may be linked to initiation of DNA replication.

An 18-base-pair sequence is sufficient for termination of rolling-circle replication of plasmid pT181

pT181 and related plasmids of gram-positive bacteria replicate by a rolling-circle mechanism. The replication initiator protein of pT181, RepC, has origin-specific nicking-closing activities. Replication of the plasmid pT181 leading strand initiates by covalent extension of the RepC-generated nick, and the origin of replication contains signals for both initiation and termination of DNA replication. We have investigated the sequence requirements for the initiation and termination steps by using plasmids containing two pT181 origins. In vitro replication experiments showed that 18- and 24-bp synthetic oligonucleotides containing the RepC nick site were active in the termination of replication. However, initiation of replication required a larger region which also includes the RepC binding site. Plasmids containing the 18- and 24-bp region were also found to be nicked by the RepC protein. Our results demonstrate that sequence requirements for initiation and termination of pT181 replication overlap, but while the RepC binding site is required for initiation, it is dispensable for termination.

Plasmids of the pT181 family show replication-specific initiator protein modification

The rolling circle plasmids of Staphylococcus aureus regulate their replication by controlling initiator (Rep) protein synthesis. It was demonstrated recently that the pT181 initiator protein RepC is inactivated during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC* (A. Rasooly and R. P. Novick, Science, 262:1048-1050). We establish here that this initiator modification occurs with four other members of the pT181 family and that it occurs in Bacillus subtilis as well as S. aureus. These results suggest that Rep conversion to Rep* is probably universal among plasmids of the pT181 family and is not host dependent.

Replication-specific inactivation of the pT181 plasmid initiator protein

Replication of the Staphylococcus aureus plasmid pT181, which occurs by the rolling circle mechanism, is accompanied by the covalent attachment of a approximately 12-residue oligodeoxy-nucleotide to one subunit of the dimeric plasmid-coded initiator protein, RepC. This oligonucleotide represents the plasmid sequence immediately 3' to the initiating nick site. The resulting heterodimeric protein lacks the topoisomerase and replication activities of unmodified RepC, suggesting that the regulation of plasmid DNA replication requires post-replicational inactivation of the initiator protein as well as control of its synthesis.

Genetic evidence for replication enhancement from a distance

Rolling circle replication of the Staphylococcus aureus plasmid pT181 requires interaction of the RepC initiator protein with the origin of replication (the ori site). A second site named cmp, which is distant from ori, is thought to stimulate replication, since a mutant pT181 plasmid lacking cmp cannot coexist with a cmp+ wild-type plasmid. Second-site mutations compensating for the loss of cmp were shown to map in repC. The compensatory mutations produced RepC proteins that, unlike the wild-type, either failed to discriminate between cmp+ and cmp- plasmids or preferred cmp- to cmp+ plasmids. These studies demonstrate that cmp stimulates the interaction of the replication initiator protein with the origin and therefore enhances DNA replication from a distance.

In vivo definition of the functional origin of replication (ori(+)) of the promiscuous plasmid pLS1

We have defined the minimal origin of replication of the plasmid pLS1 leading strand, as comprised within a 247 bp region, by in vivo deletion analyses. Cloning of pLS1 DNA regions containing its oriV(+) into a compatible replicon resulted in weak incompatibility towards pLS1, but only when the cloned fragment included the entire pLS1 oriV(+). Plasmids lacking a functional repB gene (which encodes the pLS1 initiator of replication RepB protein) could be established in Streptococcus pneumoniae only when RepB was supplied in trans. We conclude that all the pLS1-encoded gene products involved in its replication and control are efficient trans-complementing plasmid elements.

Characterization of the minimal origin required for replication of the streptococcal plasmid pIP501 in Bacillus subtilis

By using deletional analysis the origin of replication, oriR, of the streptococcal plasmid pIP501 in Bacillus subtilis has been mapped at a position immediately downstream of the repR gene. Determination of both the right and left border of oriR allowed the definition of a sequence of a maximum of 52 nucleotides which theoretically constitutes the minimal origin of replication. Recently, the start point of leading-strand synthesis of the closely related plasmid pAM beta 1 has been mapped at a position which is located exactly in the middle of this sequence (Bruand et al., 1991). The function of oriR did not depend on its location downstream of the repR gene. Translocation of oriR-containing fragments to other regions of the plasmid proved to be possible. The smallest translocated fragment that still reconstituted autonomous replication was 72bp in size. This fragment was also active in directing the replication of an Escherichia coli plasmid in B. subtilis when the RepR protein was supplied in trans from a repR gene integrated into the host chromosome. The transformation efficiency of plasmids carrying translocated oriR fragments showed a certain dependence on the fragment length and orientation. The DNA sequence of oriR included an inverted repeat, both branches of which appeared to be essential for oriR function. The repeats of oriR shared sequence similarity with a repeat located upstream of promoter pII, which has been suggested to be involved in autoregulation of repR expression.

Uncoupling of the DNA topoisomerase and replication activities of an initiator protein

The replication initiator proteins encoded by the pT181 and related plasmids have sequence-specific DNA binding and topoisomerase activities. These proteins create a site-specific nick in one strand of the DNA at the origin of replication that serves as a primer for the initiation of replication. To define the regions of the pT181-encoded initiator protein, RepC, that are involved in its DNA binding, topoisomerase, and replication activities, we have carried out site-directed mutagenesis of the repC gene. Analysis of mutant RepC proteins in vitro and in vivo has identified the amino acids that are critical for its various biochemical activities. The DNA binding domain of RepC was found to be located near its C-terminal region and was different from the domain involved in its sequence-specific topoisomerase activity. These studies also showed that the DNA topoisomerase activity of the initiator protein can be uncoupled from its tight noncovalent DNA binding and replication activities.

Specificity of origin recognition by replication initiator protein in plasmids of the pT181 family is determined by a six amino acid residue element

We have investigated the specificity of replication origin recognition by the initiator proteins of a set of six closely related Staphylococcus aureus plasmids, the pT181 family. These plasmids replicate by an asymmetric rolling-circle mechanism using plasmid-coded initiators that nick the replication origins and form a phosphotyrosine bond at the 5' nick terminus. Five of the plasmids are in different incompatibility groups and their initiator proteins do not cross-complement the cloned origins of any but their own plasmid. One pair is weakly incompatible and their initiator proteins and origins do cross-complement for replication in vivo. This pattern of cross-reactivity led to the prediction that the determinant of specificity would correspond to a homologously positioned set of six residues in the C-terminal domain of the protein, some 80 residues away from the active site tyrosine, that are divergent for all of the compatible plasmids and identical for the incompatible pair. Site-directed mutagenesis was used to exchange these six residues among three pairs of plasmids and these exchanges brought about the predicted switching of origin recognition specificity. Single substitution within this six residue set reduced or eliminated the activity of the protein but did not alter the origin recognition specificity. These six and flanking residues cannot form an amphipathic alpha-helix nor do they conform to the classical helix-turn-helix or other known DNA binding motifs. A novel type of interaction is suggested in which the protein binds to its recognition site, bends and melts the DNA, and causes or enhances the extrusion of an adjacent cruciform containing the nick site. This configuration would juxtapose the nicking target and the active site tyrosine residue and would unwind the highly G + C-rich replication origin.

Replication of single-stranded plasmid pT181 DNA in vitro

Plasmid pT181 is a 4437-base-pair, multicopy plasmid of Staphylococcus aureus that encodes tetracycline resistance. The replication of the leading strand of pT181 DNA initiates by covalent extension of a site-specific nick generated by the initiator protein at the origin of replication and proceeds by an asymmetric rolling circle mechanism. The origin of the leading strand synthesis also serves as the site for termination of replication. Replication of pT181 DNA in vivo and in vitro has been shown to generate a single-stranded intermediate that corresponds to the leading strand of the DNA. In vivo results have suggested that a palindromic sequence, palA, located near the leading strand termination site acts as the lagging strand origin. In this paper we report the development and characterization of an in vitro system for the replication of single-stranded pT181 DNA. Synthesis of the lagging strand of pT181 proceeded in the absence of the leading strand synthesis and did not require the pT181-encoded initiator protein, RepC. The replication of the lagging strand required RNA polymerase-dependent synthesis of an RNA primer. Replication of single-stranded pT181 DNA was found to be greatly stimulated in the presence of the palA sequence. We also show that palA acts as the lagging strand origin and that DNA synthesis initiates within this region.

Initiation of rolling-circle replication in pT181 plasmid: initiator protein enhances cruciform extrusion at the origin

Plasmid pT181 DNA secondary structures have been analyzed in vitro by nuclease S1 digestion and in vivo by bromoacetaldehyde treatment. A cruciform structure occurring at the pT181 replication origin in vitro is greatly enhanced by the binding of the plasmid-encoded initiator protein RepC. In vivo a DNA secondary structure also existed in the replication origin. Its frequency of formation was correlated with efficiency of RepC utilization. These data suggest that cruciform extrusion at the origin is involved in initiation of pT181 rolling-circle replication. A neighboring DNA structure influences the conformation of the origin in vivo.

Lactobacillus hilgardii plasmid pLAB1000 consists of two functional cassettes commonly found in other gram-positive organisms

A Lactobacillus hilgardii plasmid, pLAB1000, was studied to understand the organization of autonomous replicons from lactobacilli. Two cassettes could be identified. First, the replication region consisted of a sequence coding for a replication protein (Rep) and its corresponding target site, similar to those from plasmids pUB110, pC194 (Staphylococcus aureus), pFTB14, pBAA1 (Bacillus sp.), and pLP1 (Lactobacillus sp.). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate Rep production. The results also suggested that pLAB1000 replicates via a single-stranded DNA intermediate, and a putative lagging-strand initiation site was found that had similarities to those of alpha 3, St-1, and G4 isometric bacteriophages. The second cassette of pLAB1000 consisted of a sequence coding for a putative mobilization protein (Mob) and its corresponding RSA site. This cassette was similar to those found in pT181, pUB110, pE194 (S. aureus), and pG12 (Bacillus sp.), and it was found to be conserved among different Lactobacillus plasmid replicons. The origin and evolution of these functional cassettes are also discussed.

Initiation of replication of plasmid pLS1. The initiator protein RepB acts on two distant DNA regions

The broad host range streptococcal plasmid pLS1 encodes the 24.2 kDa protein RepB, which is involved in the initiation of plasmid replication by an asymmetric rolling circle. RepB was overproduced in an Escherichia coli expression system and the protein was purified and characterized. Determination of the amino-terminal sequence of RepB protein showed that translation starts from the first AUG codon, which is preceded by an atypical ribosome-binding site sequence. RepB protein has in vitro-specific endonuclease and topoisomerase-like activities on the plasmid ori(+). Footprinting experiments showed that RepB protein binds to a DNA region that includes three direct repeats of 11 base-pairs. Initiation of replication of pLS1 could start by a RepB-generated specific nick introduced on the plasmid coding strand. However, as a striking difference with other Gram-positive replicons, the nick generated by RepB lies 86 base-pairs upstream from its binding region. To explain the action of RepB at a distance, complex structures of the pLS1 ori(+) are proposed.

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

pT181 and pC221 are closely related Staphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in the rep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping the rep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181.(ABSTRACT TRUNCATED AT 250 WORDS)

The family of highly interrelated single-stranded deoxyribonucleic acid plasmids

Many plasmids from gram-positive bacteria replicate via a single-stranded deoxyribonucleic acid (ssDNA) intermediate, most probably by a rolling-circle mechanism (these plasmids are referred to in this paper as ssDNA plasmids). Their plus and minus origins are physically separated, and replicative initiations are not simultaneous; it is this feature that allows visualization of ssDNA replication intermediates. The insertion of foreign DNA into an ssDNA plasmid may provoke a high frequency of deletions, changes of replicative products to high-molecular-weight forms, segregational loss, and decreased plasmid copy numbers. When an ssDNA plasmid is inserted into the chromosome, both deletions and amplifications may be induced. Both the mode of replication and the copy control mechanism affect the fate of inserted foreign material, usually selecting for its loss. Thus, after having tasted various morsels of DNA, the resulting plasmid stays trim. The features of the ssDNA plasmids seem to be beneficial for their viability and propagation, but not for their use as cloning vectors. However, plasmids replicating via ssDNA intermediates are being exploited to yield insights into the mechanisms of recombination and amplification.