Identification of a gene in Bacillus subtilis bacteriophage SPP1 determining the amount of packaged DNA

Viral Small Terminase: A Divergent Structural Framework for a Conserved Biological Function

The genome packaging motor of bacteriophages and herpesviruses is built by two terminase subunits, known as large (TerL) and small (TerS), both essential for viral genome packaging. TerL structure, composition, and assembly to an empty capsid, as well as the mechanisms of ATP-dependent DNA packaging, have been studied in depth, shedding light on the chemo-mechanical coupling between ATP hydrolysis and DNA translocation. Instead, significantly less is known about the small terminase subunit, TerS, which is dispensable or even inhibitory in vitro, but essential in vivo. By taking advantage of the recent revolution in cryo-electron microscopy (cryo-EM) and building upon a wealth of crystallographic structures of phage TerSs, in this review, we take an inventory of known TerSs studied to date. Our analysis suggests that TerS evolved and diversified into a flexible molecular framework that can conserve biological function with minimal sequence and quaternary structure conservation to fit different packaging strategies and environmental conditions.

Biophysical analysis of Pseudomonas-phage PaP3 small terminase suggests a mechanism for sequence-specific DNA-binding by lateral interdigitation

The genome packaging motor of tailed bacteriophages and herpesviruses is a powerful nanomachine built by several copies of a large (TerL) and a small (TerS) terminase subunit. The motor assembles transiently at the portal vertex of an empty precursor capsid (or procapsid) to power genome encapsidation. Terminase subunits have been studied in-depth, especially in classical bacteriophages that infect Escherichia coli or Salmonella, yet, less is known about the packaging motor of Pseudomonas-phages that have increasing biomedical relevance. Here, we investigated the small terminase subunit from three Podoviridae phages that infect Pseudomonas aeruginosa. We found TerS is polymorphic in solution but assembles into a nonamer in its high-affinity heparin-binding conformation. The atomic structure of Pseudomonas phage PaP3 TerS, the first complete structure for a TerS from a cos phage, reveals nine helix-turn-helix (HTH) motifs asymmetrically arranged around a β-stranded channel, too narrow to accommodate DNA. PaP3 TerS binds DNA in a sequence-specific manner in vitro. X-ray scattering and molecular modeling suggest TerS adopts an open conformation in solution, characterized by dynamic HTHs that move around an oligomerization core, generating discrete binding crevices for DNA. We propose a model for sequence-specific recognition of packaging initiation sites by lateral interdigitation of DNA.

CryoEM structure of the tegumented capsid of Epstein-Barr virus

Epstein-Barr virus (EBV) is the primary cause of infectious mononucleosis and has been shown to be closely associated with various malignancies. Here, we present a complete atomic model of EBV, including the icosahedral capsid, the dodecameric portal and the capsid-associated tegument complex (CATC). Our in situ portal from the tegumented capsid adopts a closed conformation with its channel valve holding the terminal viral DNA and with its crown region firmly engaged by three layers of ring-like dsDNA, which, together with the penton flexibility, effectively alleviates the capsid inner pressure placed on the portal cap. In contrast, the CATCs, through binding to the flexible penton vertices in a stoichiometric manner, accurately increase the inner capsid pressure to facilitate the pressure-driven genome delivery. Together, our results provide important insights into the mechanism by which the EBV capsid, portal, packaged genome and the CATCs coordinately achieve a pressure balance to simultaneously benefit both viral genome retention and ejection.

Capsids and Portals Influence Each Other's Conformation During Assembly and Maturation

The portal proteins of tailed bacteriophage and Herpesvirus capsids form dodecameric rings that occupy one capsid vertex and are incorporated during the assembly of capsid precursors called procapsids or proheads. Portals are essential and serve as the pore for DNA transit and the site of tail attachment; however, bacteriophage HK97 capsid proteins assemble efficiently without a portal when expressed from plasmids. Following portal co-expression, portals were incorporated into about half of the proheads that were made. In the absence of active capsid maturation protease, uncleaved proheads formed dimers, trimers, and tetramers of proheads during purification, but only if they had portals. These appeared bound to membrane-like fragments by their portals and could be disaggregated by detergents, supporting a role for membranes in their formation and in capsid assembly. The precursors to prohead oligomers were detected in cell extracts. These were able to bind to Octyl-Sepharose and could be released by detergent, while uncleaved proheads without portal or cleaved proheads with portal did not bind. Our results document a discrete change in the HK97 portal's hydrophobicity induced by cleavage of the procapsid shell in which it is embedded. Additionally, we detected an increase in the rate of expansion induced by the presence of a portal complex in cleaved HK97 proheads. These results suggest that portals and capsids influence each other's conformation during assembly. The formation of prohead oligomers also provides a rapid and sensitive assay for identification and analysis of portal incorporation mutants.

A viral small terminase subunit (TerS) twin ring pac synapsis DNA packaging model is supported by fluorescent fusion proteins

A bacteriophage T4 DNA "synapsis model" proposes that the bacteriophage T4 terminase small subunit (TerS) apposes two pac site containing dsDNA homologs to gauge concatemer maturation adequate for packaging initiation. N-terminus, C-terminus, or both ends modified fusion Ter S proteins retain function. Replacements of the TerS gene in the T4 genome with fusion genes encoding larger (18-45 kDa) TerS-eGFP and TerS-mCherry fluorescent fusion proteins function without significant change in phenotype. Co-infection and co-expression by T4 phages encoding TerS-eGFP and TerS-mCherry shows in vivo FRET in infected bacteria comparable to that of the purified, denatured and then renatured, mixed fusion proteins in vitro. FRET of purified, denatured-renatured, mixed temperature sensitive and native TerS fusion proteins at low and high temperature in vitro shows that TerS ring-like oligomer formation is essential for function in vivo. Super-resolution STORM and PALM microscopy of intercalating dye YOYO-1 DNA and photoactivatable TerS-PAmCherry-C1 fusions support accumulation of TerS dimeric or multiple ring-like oligomer structures containing DNA and gp16-mCherry in vivo as well as in vitro to regulate pac site cutting.

The Revisited Genome of Bacillus subtilis Bacteriophage SPP1

Bacillus subtilis bacteriophage SPP1 is a lytic siphovirus first described 50 years ago [1]. Its complete DNA sequence was reported in 1997 [2]. Here we present an updated annotation of the 44,016 bp SPP1 genome and its correlation to different steps of the viral multiplication process. Five early polycistronic transcriptional units encode phage DNA replication proteins and lysis functions together with less characterized, mostly non-^{essential, functions. Late transcription drives synthesis of proteins necessary for SPP1 viral particles assembly and for cell lysis, together with a short set of proteins of unknown function. The extensive genetic, biochemical and structural biology studies on the molecular mechanisms of SPP1 DNA replication and phage particle assembly rendered it a model system for tailed phages research. We propose SPP1} as the reference species for a new SPP1-like viruses genus of the Siphoviridae family.

A non-invasive method for studying viral DNA delivery to bacteria reveals key requirements for phage SPP1 DNA entry in Bacillus subtilis cells

Bacteriophages use most frequently a tail apparatus to create a channel across the entire bacterial cell envelope to transfer the viral genome to the host cell cytoplasm, initiating infection. Characterization of this critical step remains a major challenge due to the difficulty to monitor DNA entry in the bacterium and its requirements. In this work we developed a new method to study phage DNA entry that has the potential to be extended to many tailed phages. Its application to study genome delivery of bacteriophage SPP1 into Bacillus subtilis disclosed a key role of the host cell membrane potential in the DNA entry process. An energized B. subtilis membrane and a millimolar concentration of calcium ions are shown to be major requirements for SPP1 DNA entry following the irreversible binding of phage particles to the receptor YueB.

Mechanisms of DNA Packaging by Large Double-Stranded DNA Viruses

Translocation of viral double-stranded DNA (dsDNA) into the icosahedral prohead shell is catalyzed by TerL, a motor protein that has ATPase, endonuclease, and translocase activities. TerL, following endonucleolytic cleavage of immature viral DNA concatemer recognized by TerS, assembles into a pentameric ring motor on the prohead's portal vertex and uses ATP hydrolysis energy for DNA translocation. TerL's N-terminal ATPase is connected by a hinge to the C-terminal endonuclease. Inchworm models propose that modest domain motions accompanying ATP hydrolysis are amplified, through changes in electrostatic interactions, into larger movements of the C-terminal domain bound to DNA. In phage ϕ29, four of the five TerL subunits sequentially hydrolyze ATP, each powering translocation of 2.5 bp. After one viral genome is encapsidated, the internal pressure signals termination of packaging and ejection of the motor. Current focus is on the structures of packaging complexes and the dynamics of TerL during DNA packaging, endonuclease regulation, and motor mechanics.

The C-terminal domain of the bacteriophage T4 terminase docks on the prohead portal clip region during DNA packaging

Bacteriophage ATP-based packaging motors translocate DNA into a pre-formed prohead through a dodecameric portal ring channel to high density. We investigated portal-terminase docking interactions at specifically localized residues within a terminase-interaction region (aa279-316) in the phage T4 portal protein gp20 equated to the clip domain of the SPP1 portal crystal structure by 3D modeling. Within this region, three residues allowed A to C mutations whereas three others did not, consistent with informatics analyses showing the tolerated residues are not strongly conserved evolutionarily. About 7.5nm was calculated by FCS-FRET studies employing maleimide Alexa488 dye labeled A316C proheads and gp17 CT-ReAsH supporting previous work docking the C-terminal end of the T4 terminase (gp17) closer to the N-terminal GFP-labeled portal (gp20) than the N-terminal end of the terminase. Such a terminase-portal orientation fits better to a proposed "DNA crunching" compression packaging motor and to portal determined DNA headful cutting.

Function and horizontal transfer of the small terminase subunit of the tailed bacteriophage Sf6 DNA packaging nanomotor

Bacteriophage Sf6 DNA packaging series initiate at many locations across a 2kbp region. Our in vivo studies show that Sf6 small terminase subunit (TerS) protein recognizes a specific packaging (pac) site near the center of this region, that this site lies within the portion of the Sf6 gene that encodes the DNA-binding domain of TerS protein, that this domain of the TerS protein is responsible for the imprecision in Sf6 packaging initiation, and that the DNA-binding domain of TerS must be covalently attached to the domain that interacts with the rest of the packaging motor. The TerS DNA-binding domain is self-contained in that it apparently does not interact closely with the rest of the motor and it binds to a recognition site that lies within the DNA that encodes the domain. This arrangement has allowed the horizontal exchange of terS genes among phages to be very successful.

The 1.58 Å resolution structure of the DNA-binding domain of bacteriophage SF6 small terminase provides new hints on DNA binding

DNA packaging in tailed bacteriophages and in evolutionarily related herpesviruses is controlled by a viral-encoded terminase. As in a number of other phages, in the Bacillus subtilis bacteriophages SF6 and SPP1 the terminase complex consists of two proteins: G1P and G2P. The crystal structure of the N-terminal DNA-binding domain of the bacteriophage SF6 small terminase subunit G1P is reported. Structural comparison with other DNA-binding proteins allows a general model for the interaction of G1P with the packaging-initiation site to be proposed.

The nuclease domain of the SPP1 packaging motor coordinates DNA cleavage and encapsidation

The large terminase subunit is a central component of the genome packaging motor from tailed bacteriophages and herpes viruses. This two-domain enzyme has an N-terminal ATPase activity that fuels DNA translocation during packaging and a C-terminal nuclease activity required for initiation and termination of the packaging cycle. Here, we report that bacteriophage SPP1 large terminase (gp2) is a metal-dependent nuclease whose stability and activity are strongly and preferentially enhanced by Mn(2+) ions. Mutation of conserved residues that coordinate Mn(2+) ions in the nuclease catalytic site affect the metal-induced gp2 stabilization and impair both gp2-specific cleavage at the packaging initiation site pac and unspecific nuclease activity. Several of these mutations block also DNA encapsidation without affecting ATP hydrolysis or gp2 C-terminus binding to the procapsid portal vertex. The data are consistent with a mechanism in which the nuclease domain bound to the portal switches between nuclease activity and a coordinated action with the ATPase domain for DNA translocation. This switch of activities of the nuclease domain is critical to achieve the viral chromosome packaging cycle.

Portal-large terminase interactions of the bacteriophage T4 DNA packaging machine implicate a molecular lever mechanism for coupling ATPase to DNA translocation

DNA packaging by double-stranded DNA bacteriophages and herpesviruses is driven by a powerful molecular machine assembled at the portal vertex of the empty prohead. The phage T4 packaging machine consists of three components: dodecameric portal (gp20), pentameric large terminase motor (gp17), and 11- or 12-meric small terminase (gp16). These components dynamically interact and orchestrate a complex series of reactions to produce a DNA-filled head containing one viral genome per head. Here, we analyzed the interactions between the portal and motor proteins using a direct binding assay, mutagenesis, and structural analyses. Our results show that a portal binding site is located in the ATP hydrolysis-controlling subdomain II of gp17. Mutations at key residues of this site lead to temperature-sensitive or null phenotypes. A conserved helix-turn-helix (HLH) that is part of this site interacts with the portal. A recombinant HLH peptide competes with gp17 for portal binding and blocks DNA translocation. The helices apparently provide specificity to capture the cognate prohead, whereas the loop residues communicate the portal interaction to the ATPase center. These observations lead to a hypothesis in which a unique HLH-portal interaction in the symmetrically mismatched complex acts as a lever to position the arginine finger and trigger ATP hydrolysis. Transiently connecting the critical parts of the motor; subdomain I (ATP binding), subdomain II (controlling ATP hydrolysis), and C-domain (DNA movement), the portal-motor interactions might ensure tight coupling between ATP hydrolysis and DNA translocation.

Genome gating in tailed bacteriophage capsids

Tailed bacteriophages use a portal system for genome entry and exit from viral capsids. Here, we review the mechanisms how these movements are controlled by the genome gatekeeper that assembles at the portal structure. Phage DNA is packaged at high pressure inside the viral capsid by a powerful motor. The viral genome is translocated through the central channel of the portal protein found at a single vertex of the capsid. Packaging is normally terminated by endonucleolytic cleavage of the substrate DNA followed by disassembly of the packaging motor and closure of the portal system, preventing leakage of the viral genome. This can be achieved either by conformational changes in the portal protein or by sequential addition of proteins that extend the portal channel (adaptors) and physically close it preventing DNA exit (stoppers). The resulting connector structure provides the interface for assembly of short tails (podoviruses) or for attachment of preformed long tails (siphoviruses and myoviruses). The connector maintains the viral DNA correctly positioned for ejection that is triggered by interaction of the phage particle with bacterial receptors. Recent exciting advances are providing new molecular insights on the mechanisms that ensure precise coordination of these critical steps required both for stable viral genome packaging and for its efficient release to initiate infection.

Structure and function of the small terminase component of the DNA packaging machine in T4-like bacteriophages

Tailed DNA bacteriophages assemble empty procapsids that are subsequently filled with the viral genome by means of a DNA packaging machine situated at a special fivefold vertex. The packaging machine consists of a "small terminase" and a "large terminase" component. One of the functions of the small terminase is to initiate packaging of the viral genome, whereas the large terminase is responsible for the ATP-powered translocation of DNA. The small terminase subunit has three domains, an N-terminal DNA-binding domain, a central oligomerization domain, and a C-terminal domain for interacting with the large terminase. Here we report structures of the central domain in two different oligomerization states for a small terminase from the T4 family of phages. In addition, we report biochemical studies that establish the function for each of the small terminase domains. On the basis of the structural and biochemical information, we propose a model for DNA packaging initiation.

Viral connectors for DNA encapsulation

Viral connectors are key components of the life cycle of bacteriophages and other viral systems. They participate in procapsid assembly, and they are instrumental in DNA packaging and release. Connector proteins build hollow cylindrical dodecamers that show an overall morphological similarity among different viral systems including a remarkable conserved domain in the central part of the protein. These domains build the wall of the channel forming a 24 α-helices stretch together with an α-β extension. A similar α-helical arrangement is found in other unspecific DNA translocating complexes, suggesting the existence of a common structural signature for channel formation. Preliminary experiments suggest that connectors might be ideal candidates as nanopores for synthetic applications in nanotechnology.

Bacteriophage infection in rod-shaped gram-positive bacteria: evidence for a preferential polar route for phage SPP1 entry in Bacillus subtilis

Entry into the host bacterial cell is one of the least understood steps in the life cycle of bacteriophages. The different envelopes of Gram-negative and Gram-positive bacteria, with a fluid outer membrane and exposing a thick peptidoglycan wall to the environment respectively, impose distinct challenges for bacteriophage binding and (re)distribution on the bacterial surface. Here, infection of the Gram-positive rod-shaped bacterium Bacillus subtilis by bacteriophage SPP1 was monitored in space and time. We found that SPP1 reversible adsorption occurs preferentially at the cell poles. This initial binding facilitates irreversible adsorption to the SPP1 phage receptor protein YueB, which is encoded by a putative type VII secretion system gene cluster. YueB was found to concentrate at the cell poles and to display a punctate peripheral distribution along the sidewalls of B. subtilis cells. The kinetics of SPP1 DNA entry and replication were visualized during infection. Most of the infecting phages DNA entered and initiated replication near the cell poles. Altogether, our results reveal that the preferentially polar topology of SPP1 receptors on the surface of the host cell determines the site of phage DNA entry and subsequent replication, which occurs in discrete foci.

Role of φ29 connector channel loops in late-stage DNA packaging

Double-stranded DNA bacteriophages and their eukaryotic virus counterparts have 12-fold head-tail connector assemblages embedded at a unique capsid vertex. This vertex is the site of assembly of the DNA packaging motor, and the connector has a central channel through which viral DNA passes during genome packaging and subsequent host infection. Crystal structures of connectors from different phages reveal either disordered residues or structured loops that project into the connector channel. Given the proximity to the translocating DNA substrate, these loops have been proposed to play a role in DNA packaging. Previous models have proposed structural motions in either the packaging ATPase or the connector channel loops as the driving force that translocates the DNA into the prohead. Here, we mutate the channel loops of the Bacillus subtilis bacteriophage φ29 connector and show that these loops have no active role in translocation of DNA. Instead, they appear to have an essential function near the end of packaging, acting to retain the packaged DNA in the head in preparation for motor detachment and subsequent tail assembly and virion completion.

Bacteriophage assembly

Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

Crystal structure of Bacillus subtilis SPP1 phage gp22 shares fold similarity with a domain of lactococcal phage p2 RBP

SPP1 is a siphophage infecting the gram-positive bacterium Bacillus subtilis. It is constituted by an icosahedric head and a long non-contractile tail formed by gene products (gp) 17-21. A group of 5 small genes (gp 22-24.1) follows in the genome those coding for the main tail components. However, the belonging of the corresponding gp to the tail or to other parts of the phage is not documented. Among these, gp22 lacks sequence identity to any known protein. We report here the gp22 structure solved by X-ray crystallography at 2.35 A resolution. We found that gp22 is a monomer in solution and possesses a significant structural similarity with lactococcal phage p2 ORF 18 N-terminal "shoulder" domain.

Crystal structure of Bacillus subtilis SPP1 phage gp23.1, a putative chaperone

SPP1 is a siphophage infecting the gram-positive bacterium Bacillus subtilis. The SPP1 tail electron microscopy (EM) reconstruction revealed that it is mainly constituted by conserved structural proteins such as the major tail proteins (gp17.1), the tape measure protein (gp18), the Distal tail protein (Dit, gp19.1), and the Tail associated lysin (gp21). A group of five small genes (22-24.1) follows in the genome but it remains to be elucidated whether their protein products belong or not to the tail. Noteworthy, an unassigned EM density accounting for ~245 kDa is present at the distal end of the SPP1 tail-tip. We report here the gp23.1 crystal structure at 1.6 A resolution, a protein that lacks sequence identity to any known protein. We found that gp23.1 forms a hexamer both in the crystal lattice and in solution as revealed by light scattering measurements. The gp23.1 hexamer does not fit well in the unassigned SPP1 tail-tip EM density and we hypothesize that this protein might act as a chaperone.

Transformation of environmental Bacillus subtilis isolates by transiently inducing genetic competence

Domesticated laboratory strains of Bacillus subtilis readily take up and integrate exogenous DNA. In contrast, “wild” ancestors or Bacillus strains recently isolated from the environment can only be genetically modified by phage transduction, electroporation or protoplast transformation. Such methods are laborious, have a variable yield or cannot efficiently be used to alter chromosomal DNA. A major disadvantage of using laboratory strains is that they have often lost, or do not display ecologically relevant physiologies such as the ability to form biofilms. Here we present a method that allows genetic transformation by natural competence in several environmental isolates of B. subtilis. Competence in these strains was established by expressing the B. subtilis competence transcription factor ComK from an IPTG-inducible promoter construct present on an unstable plasmid. This transiently activates expression of the genes required for DNA uptake and recombination in the host strain. After transformation, the comK encoding plasmid is lost easily because of its intrinsic instability and the transformed strain returns to its wild state. Using this method, we have successfully generated mutants and introduced foreign DNA into a number of environmental isolates and also B. subtilis strain NCIB3610, which is widely used to study biofilm formation. Application of the same method to strains of B. licheniformis was unsuccessful. The efficient and rapid approach described here may facilitate genetic studies in a wider array of environmental B. subtilis strains.

DNA crunching by a viral packaging motor: Compression of a procapsid-portal stalled Y-DNA substrate

Many large double-stranded DNA viruses employ high force-generating ATP-driven molecular motors to package to high density their genomes into empty procapsids. Bacteriophage T4 DNA translocation is driven by a two-component motor consisting of the procapsid portal docked with a packaging terminase-ATPase. Fluorescence resonance energy transfer and fluorescence correlation spectroscopic (FRET-FCS) studies of a branched (Y-junction) DNA substrate with a procapsid-anchoring leader segment and a single dye molecule situated at the junction point reveal that the "Y-DNA" stalls in proximity to the procapsid portal fused to GFP. Comparable structure Y-DNA substrates containing energy transfer dye pairs in the Y-stem separated by 10 or 14 base pairs reveal that B-form DNA is locally compressed 22-24% by the linear force of the packaging motor. Torsional compression of duplex DNA is thus implicated in the mechanism of DNA translocation.

Direct interaction of the bacteriophage SPP1 packaging ATPase with the portal protein

DNA packaging in tailed bacteriophages and other viruses requires assembly of a complex molecular machine at a specific vertex of the procapsid. This machine is composed of the portal protein that provides a tunnel for DNA entry, an ATPase that fuels DNA translocation (large terminase subunit), and most frequently, a small terminase subunit. Here we characterized the interaction between the terminase ATPase subunit of bacteriophage SPP1 (gp2) and the procapsid portal vertex. We found, by affinity pulldown assays with purified proteins, that gp2 interacts with the portal protein, gp6, independently of the terminase small subunit gp1, DNA, or ATP. The gp2-procapsid interaction via the portal protein depends on gp2 concentration and requires the presence of divalent cations. Competition experiments showed that isolated gp6 can only inhibit gp2-procapsid interactions and DNA packaging at gp6:procapsid molar ratios above 10-fold. Assays with gp6 carrying mutations in distinct regions of its structure that affect the portal-induced stimulation of ATPase and DNA packaging revealed that none of these mutations impedes gp2-gp6 binding. Our results demonstrate that the SPP1 packaging ATPase binds directly to the portal and that the interaction is stronger with the portal embedded in procapsids. Identification of mutations in gp6 that allow for assembly of the ATPase-portal complex but impair DNA packaging support an intricate cross-talk between the two proteins for activity of the DNA translocation motor.

The P22 tail machine at subnanometer resolution reveals the architecture of an infection conduit

The portal channel is a key component in the life cycle of bacteriophages and herpesviruses. The bacteriophage P22 portal is a 1 megadalton dodecameric oligomer of gp1 that plays key roles in capsid assembly, DNA packaging, assembly of the infection machinery, and DNA ejection. The portal is the nucleation site for the assembly of 39 additional subunits generated from multiple copies of four gene products (gp4, gp10, gp9, and gp26), which together form the multifunctional tail machine. These components are organized with a combination of 12-fold (gp1, gp4), 6-fold (gp10, trimers of gp9), and 3-fold (gp26, gp9) symmetry. Here we present the 3-dimensional structures of the P22 assembly-naive portal formed from expressed subunits (gp1) and the intact tail machine purified from infectious virions. The assembly-naive portal structure exhibits a striking structural similarity to the structures of the portal proteins of SPP1 and phi29 derived from X-ray crystallography.

Laboratory strains of Bacillus subtilis do not exhibit swarming motility

We redemonstrate that SwrA is essential for swarming motility in Bacillus subtilis, and we reassert that laboratory strains of B. subtilis do not swarm. Additionally, we find that a number of other genes, previously reported to be required for swarming in laboratory strains, are dispensable for robust swarming motility in an undomesticated strain. We attribute discrepancies in the literature to a lack of reproducible standard experimental conditions, selection for spontaneous swarming suppressors, inadvertent genetic linkage to swarming mutations, and auxotrophy.

Structure and energetics of encapsidated DNA in bacteriophage HK97 studied by scanning calorimetry and cryo-electron microscopy

Encapsidation of duplex DNA by bacteriophages represents an extreme case of genome condensation, reaching near-crystalline concentrations of DNA. The HK97 system is well suited to study this phenomenon in view of the detailed knowledge of its capsid structure. To characterize the interactions involved, we combined calorimetry with cryo-electron microscopy and native gel electrophoresis. We found that, as in other phages, HK97 DNA is organized in coaxially wound nested shells. When DNA-filled capsids (heads) are scanned in buffer containing 1 mM Mg(2+), DNA melting and capsid denaturation both contribute to the complex thermal profile between 82 degrees C and 96 degrees C. In other conditions (absence of Mg(2+) and lower ionic strength), DNA melting shifts to lower temperatures and the two events are resolved. Heads release their DNA at temperatures well below the onset of DNA melting or capsid denaturation. We suggest that, on heating, the internal pressure increases, causing the DNA to exit-probably via the portal vertex-while the capsid, although largely intact, sustains local damage that leads to an earlier onset of thermal denaturation. Heads differ structurally from empty capsids in the curvature of their protein shell, a change attributable to outwards pressure exerted by the DNA. We propose that this transition is sensed by the portal that is embedded in the capsid wall, whereupon the structure of the portal and its interactions with terminase, the packaging enzyme, are altered, thus signaling that packaging is at or approaching completion.

The bacteriophage DNA packaging motor

An ATP-powered DNA translocation machine encapsidates the viral genome in the large dsDNA bacteriophages. The essential components include the empty shell, prohead, and the packaging enzyme, terminase. During translocation, terminase is docked on the prohead's portal protein. The translocation ATPase and the concatemer-cutting endonuclease reside in terminase. Remarkably, terminases, portal proteins, and shells of tailed bacteriophages and herpes viruses show conserved features. These DNA viruses may have descended from a common ancestor. Terminase's ATPase consists of a classic nucleotide binding fold, most closely resembling that of monomeric helicases. Intriguing models have been proposed for the mechanism of dsDNA translocation, invoking ATP hydrolysis-driven conformational changes of portal or terminase powering DNA motion. Single-molecule studies show that the packaging motor is fast and powerful. Recent advances permit experiments that can critically test the packaging models. The viral genome translocation mechanism is of general interest, given the parallels between terminases, helicases, and other motor proteins.

A shifty stop for a hairy tail

The tail apparatus of the bacteriophage SPP1 is an extraordinary approximately 1600-A-long molecular machine. The tail mediates attachment of the virus to the host surface receptor, as well-as ejection of the viral genome into the host. The distal tip of the tail binds the extracellular ectodomain of the Bacillus subtilis receptor YueB, while the tail tube provides a conduit to funnel the viral genome into the host. This process, which culminates with the ejection of the approximately 44 kb of viral DNA across the thick, cell envelope of the Gram-positive bacterial cell, takes place in a time scale of seconds to minutes and represents a remarkable example of biotransformation. In this issue of Molecular Microbiology, Auzat et al. provide compelling evidence that the two major structural proteins of the SPP1 tail, gp17.1 (approximately 19.1 kDa) and gp17.1* (approximately 28 kDa), share a common N-terminal sequence, and that gp17.1* is generated by a translational frameshift in the gene 17.1. The extra domain fused to gp17.1* is synthesized by a +1 programmed translational frameshift at the end of gene 17.1, which leads to the synthesis of approximately one gp17.1* for every three equivalents of gp17.1. This finding extends our current knowledge of translational frameshifts and provides a framework to understand how Siphoviridae phages like SPP1 have developed long-tail machines using only two major structural proteins.

Origin and function of the two major tail proteins of bacteriophage SPP1

The majority of bacteriophages have a long non-contractile tail (Siphoviridae) that serves as a conduit for viral DNA traffic from the phage capsid to the host cell at the beginning of infection. The 160-nm-long tail tube of Bacillus subtilis bacteriophage SPP1 is shown to be composed of two major tail proteins (MTPs), gp17.1 and gp17.1*, at a ratio of about 3:1. They share a common amino-terminus, but the latter species has approximately 10 kDa more than gp17.1. A CCC.UAA sequence with overlapping proline codons at the 3' end of gene 17.1 drives a programmed translational frameshift to another open reading frame. The recoding event generates gp17.1*. Phages carrying exclusively gp17.1 or gp17.1* are viable, but tails are structurally distinct. gp17.1 and the carboxyl-terminus of gp17.1* have a distinct evolutionary history correlating with different functions: the polypeptide sequence identical in the two proteins is responsible for assembly of the tail tube while the additional module of gp17.1* shields the structure exterior exposed to the environment. The carboxyl-terminal extension is an elaboration present in some tailed bacteriophages. Different extensions were found to combine in a mosaic fashion with the MTP essential module in a subset of Siphoviridae genomes.

Pressure built by DNA packing inside virions: enough to drive DNA ejection in vitro, largely insufficient for delivery into the bacterial cytoplasm

Tailed bacteriophage particles carry DNA highly pressurized inside the capsid. Challenge with their receptor promotes release of viral DNA. We show that addition of the osmolyte polyethylene glycol (PEG) has two distinct effects in bacteriophage SPP1 DNA ejection. One effect is to inhibit the trigger for DNA ejection. The other effect is to exert an osmotic pressure that controls the extent of DNA released in phages that initiate ejection. We carried out independent measurements of each effect, which is an essential requirement for their quantitative study. The fraction of phages that do not eject increased linearly with the external osmotic pressure. In the remaining phage particles ejection stopped after a defined amount of DNA was reached inside the capsid. Direct measurement of the size of non-ejected DNA by gel electrophoresis at different PEG concentrations in the latter sub-population allowed determination of the external osmotic pressure that balances the force powering DNA exit (47 atm for SPP1 wild-type). DNA exit stops when the ejection force mainly due to repulsion between DNA strands inside the SPP1 capsid equalizes the force resisting DNA insertion into the PEG solution. Considering the turgor pressure in the Bacillus subtilis cytoplasm the energy stored in the tight phage DNA packing is only sufficient to power entry of the first 17% of the SPP1 chromosome into the cell, the remaining 83% requiring application of additional force for internalization.

Structural rearrangements between portal protein subunits are essential for viral DNA translocation

Transport of DNA into preformed procapsids is a general strategy for genome packing inside virus particles. In most viruses, this task is accomplished by a complex of the viral packaging ATPase with the portal protein assembled at a specialized vertex of the procapsid. Such molecular motor translocates DNA through the central tunnel of the portal protein. A central question to understand this mechanism is whether the portal is a mere conduit for DNA or whether it participates actively on DNA translocation. The most constricted part of the bacteriophage SPP1 portal tunnel is formed by twelve loops, each contributed from one individual subunit. The position of each loop is stabilized by interactions with helix alpha-5, which extends into the portal putative ATPase docking interface. Here, we have engineered intersubunit disulfide bridges between alpha-5s of adjacent portal ring subunits. Such covalent constraint blocked DNA packaging, whereas reduction of the disulfide bridges restored normal packaging activity. DNA exit through the portal in SPP1 virions was unaffected. The data demonstrate that mobility between alpha-5 helices is essential for the mechanism of viral DNA translocation. We propose that the alpha-5 structural rearrangements serve to coordinate ATPase activity with the positions of portal tunnel loops relative to the DNA double helix.

Structural framework for DNA translocation via the viral portal protein

Tailed bacteriophages and herpesviruses load their capsids with DNA through a tunnel formed by the portal protein assembly. Here we describe the X-ray structure of the bacteriophage SPP1 portal protein in its isolated 13-subunit form and the pseudoatomic structure of a 12-subunit assembly. The first defines the DNA-interacting segments (tunnel loops) that pack tightly against each other forming the most constricted part of the tunnel; the second shows that the functional dodecameric state must induce variability in the loop positions. Structural observations together with geometrical constraints dictate that in the portal-DNA complex, the loops form an undulating belt that fits and tightly embraces the helical DNA, suggesting that DNA translocation is accompanied by a 'mexican wave' of positional and conformational changes propagating sequentially along this belt.

Macromolecular mass spectrometry and electron microscopy as complementary tools for investigation of the heterogeneity of bacteriophage portal assemblies

The success of electron-cryo microscopy (cryo-EM) and image reconstruction of cyclic oligomers, such as the viral and bacteriophage portals, depends on the accurate knowledge of their order of symmetry. A number of statistical methods of image analysis address this problem, but often do not provide unambiguous results. Direct measurement of the oligomeric state of multisubunit protein assemblies is difficult when the number of subunits is large and one subunit renders only a small increment to the full size of the oligomer. Moreover, when mixtures of different stochiometries are present techniques such as analytical centrifugation or size-exclusion chromatography are also less helpful. Here, we use electrospray ionization mass spectrometry to directly determine the oligomeric states of the in vitro assembled portal oligomers of the phages P22, Phi-29 and SPP1, which range in mass from 430 kDa to about 1 million Da. Our data unambiguously reveal that the oligomeric states of Phi-29 and SPP1 portals were 12 and 13, respectively, in good agreement with crystallographic and electron microscopy data. However, in vitro assembled P22 portals were a mixture of 11- and 12-mer species in an approximate ratio of 2:1, respectively. A subsequent reference-free alignment of electron microscopy images of the P22 portal confirmed this mixture of oligomeric states. We conclude that macromolecular mass spectrometry is a valuable tool in structural biology that can aide in the determination of oligomeric states and symmetry of assemblies, providing a good starting point for improved image analysis of cryo-EM data.

Efficient DNA packaging of bacteriophage PRD1 requires the unique vertex protein P6

The assembly of bacteriophage PRD1 proceeds via formation of empty procapsids containing an internal lipid membrane, into which the linear double-stranded DNA genome is subsequently packaged. The packaging ATPase P9 and other putative packaging proteins have been shown to be located at a unique vertex of the PRD1 capsid. Here, we describe the isolation and characterization of a suppressor-sensitive PRD1 mutant deficient in the unique vertex protein P6. Protein P6 was found to be an essential part of the PRD1 packaging machinery; its absence leads to greatly reduced packaging efficiency. Lack of P6 was not found to affect particle assembly, because in the P6-deficient mutant infection, wild-type (wt) amounts of particles were produced, although most were empty. P6 was determined not to be a specificity factor, as the few filled particles seen in the P6-deficient infection contained only PRD1-specific DNA. The presence of P6 was not necessary for retention of DNA in the capsid once packaging had occurred, and P6-deficient DNA-containing particles were found to be stable and infectious, albeit not as infectious as wt PRD1 virions. A packaging model for bacteriophage PRD1, based on previous results and those obtained in this study, is presented.

Portal fusion protein constraints on function in DNA packaging of bacteriophage T4

Architecturally conserved viral portal dodecamers are central to capsid assembly and DNA packaging. To examine bacteriophage T4 portal functions, we constructed, expressed and assembled portal gene 20 fusion proteins. C-terminally fused (gp20-GFP, gp20-HOC) and N-terminally fused (GFP-gp20 and HOC-gp20) portal fusion proteins assembled in vivo into active phage. Phage assembled C-terminal fusion proteins were inaccessible to trypsin whereas assembled N-terminal fusions were accessible to trypsin, consistent with locations inside and outside the capsid respectively. Both N- and C-terminal fusions required coassembly into portals with approximately 50% wild-type (WT) or near WT-sized 20am truncated portal proteins to yield active phage. Trypsin digestion of HOC-gp20 portal fusion phage showed comparable protection of the HOC and gp20 portions of the proteolysed HOC-gp20 fusion, suggesting both proteins occupy protected capsid positions, at both the portal and the proximal HOC capsid-binding sites. The external portal location of the HOC portion of the HOC-gp20 fusion phage was confirmed by anti-HOC immuno-gold labelling studies that showed a gold 'necklace' around the phage capsid portal. Analysis of HOC-gp20-containing proheads showed increased HOC protein protection from trypsin degradation only after prohead expansion, indicating incorporation of HOC-gp20 portal fusion protein to protective proximal HOC-binding sites following this maturation. These proheads also showed no DNA packaging defect in vitro as compared with WT. Retention of function of phage and prohead portals with bulky internal (C-terminal) and external (N-terminal) fusion protein extensions, particularly of apparently capsid tethered portals, challenges the portal rotation requirement of some hypothetical DNA packaging mechanisms.

The minor capsid protein gp7 of bacteriophage SPP1 is required for efficient infection of Bacillus subtilis

Gp7 is a minor capsid protein of the Bacillus subtilis bacteriophage SPP1. Homologous proteins are found in numerous phages but their function remained unknown. Deletion of gene 7 from the SPP1 genome yielded a mutant phage (SPP1del7) with reduced burst-size. SPP1del7 infections led to normal assembly of virus particles whose morphology, DNA and protein composition was undistinguishable from wild-type virions. However, only approximately 25% of the viral particles that lack gp7 were infectious. SPP1del7 particles caused a reduced depolarization of the B. subtilis membrane in infection assays suggesting a defect in virus genome traffic to the host cell. A higher number of SPP1del7 DNA ejection events led to abortive release of DNA to the culture medium when compared with wild-type infections. DNA ejection in vitro showed that no detectable gp7 is co-ejected with the SPP1 genome and that its presence in the virion correlated with anchoring of released DNA to the phage particle. The release of DNA from wild-type phages was slower than that from SPP1del7 suggesting that gp7 controls DNA exit from the virion. This feature is proposed to play a central role in supporting correct routing of the phage genome from the virion to the cell cytoplasm.

Modulation of the viral ATPase activity by the portal protein correlates with DNA packaging efficiency

DNA packaging in tailed bacteriophages and herpesviruses requires assembly of a complex molecular machine at a specific vertex of a preformed procapsid. As in all these viruses, the DNA translocation motor of bacteriophage SPP1 is composed of the portal protein (gp6) that provides a tunnel for DNA entry into the procapsid and of the viral ATPase (gp1-gp2 complex) that fuels DNA translocation. Here we studied the cross-talk between the components of the motor to control its ATP consumption and DNA encapsidation. We showed that gp6 embedded in the procapsid structure stimulated more than 10-fold the gp2 ATPase activity. This stimulation, which was significantly higher than the one conferred by isolated gp6, depended on the presence of gp1. Mutations in different regions of gp6 abolished or decreased the gp6-induced stimulation of the ATPase. This effect on gp2 activity was observed both in the presence and in the absence of DNA and showed a strict correlation with the efficiency of DNA packaging into procapsids containing the mutant portals. Our results demonstrated that the portal protein has an active control over the viral ATPase activity that correlates with the performance of the DNA packaging motor.

Maturation of phage T7 involves structural modification of both shell and inner core components

The double-stranded DNA bacteriophages are good model systems to understand basic biological processes such as the macromolecular interactions that take place during the virus assembly and maturation, or the behavior of molecular motors that function during the DNA packaging process. Using cryoelectron microscopy and single-particle methodology, we have determined the structures of two phage T7 assemblies produced during its morphogenetic process, the DNA-free prohead and the mature virion. The first structure reveals a complex assembly in the interior of the capsid, which involves the scaffolding, and the core complex, which plays an important role in DNA packaging and is located in one of the phage vertices. The reconstruction of the mature virion reveals important changes in the shell, now much larger and thinner, the disappearance of the scaffolding structure, and important rearrangements of the core complex, which now protrudes the shell and interacts with the tail. Some of these changes must originate by the pressure exerted by the DNA in the interior of the head.

Molecular and transcriptional analysis of the temperate lactococcal bacteriophage Tuc2009

The genome of bacteriophage Tuc2009 consists of 38347 base pairs on which 57 open reading frames (ORFs) were identified, divided in two oppositely transcribed regions. The leftward-transcribed region harbors three ORFs, two of which are involved in the establishment of lysogeny. The rightward-transcribed region contains 54 ORFs, which are assumed to be required for the lytic life cycle. An exception to the above organization is ORF 10, of unknown function, located within the rightward-transcribed region that has an orientation opposite to the ORFs surrounding it. Transcriptional analysis of the Tuc2009 genome following infection of a sensitive host revealed that most ORFs are transcribed in a sequential manner. ORFs that are presumed to form (part of) the genetic switch along with the superinfection exclusion-encoding gene are transcribed immediately after infection, followed by transcription of the presumed replication region. Subsequent to this, several small transcripts could be identified followed by a single 24-kb transcript. This latter transcript was shown to specify most of the identified structural proteins as well as two proteins required for host lysis. Interestingly, the 24-kb mRNA was shown to undergo splicing through the activity of a type I intron whose removal from the mRNA resulted in the formation of an ORF specifying a major structural protein. Primer extension analysis was employed to identify the 5' ends of mRNA transcripts and the genome and transcriptional data are discussed in relation to other lactococcal bacteriophages.

The portal protein plays essential roles at different steps of the SPP1 DNA packaging process

A large number of viruses use a specialized portal for entry of DNA to the viral capsid and for its polarized exit at the beginning of infection. These families of viruses assemble an icosahedral procapsid containing a portal protein oligomer in one of its 12 vertices. The viral ATPase (terminase) interacts with the portal vertex to form a powerful molecular motor that translocates DNA to the procapsid interior against a steep concentration gradient. The portal protein is an essential component of this DNA packaging machine. Characterization of single amino acid substitutions in the portal protein gp6 of bacteriophage SPP1 that block DNA packaging identified sequential steps in the packaging mechanism that require its action. Gp6 is essential at early steps of DNA packaging and for DNA translocation to the capsid interior, it affects the efficiency of DNA packaging, it is a central component of the headful sensor that determines the size of the packaged DNA molecule, and is essential for closure of the portal pore by the head completion proteins to prevent exit of the DNA encapsidated. Functional regions of gp6 necessary at each step are identified within its primary structure. The similarity between the architecture of portal oligomers and between the DNA packaging strategies of viruses using portals strongly suggests that the portal protein plays the same roles in a large number of viruses.

The high-resolution functional map of bacteriophage SPP1 portal protein

An essential component in the assembly of nucleocapsids of tailed bacteriophages and of herpes viruses is the portal protein that is located at the unique vertex of the icosahedral capsid through which DNA movements occur. A library of mutations in the bacteriophage SPP1 portal protein (gp6) was generated by random mutagenesis of gene 6. Screening of the library allowed identification of 67 single amino acid substitutions that impair portal protein function. Most of the mutations cluster within stretches of a few amino acids in the gp6 carboxyl-terminus. The mutations were divided into five classes according to the step of virus assembly that they impair: (1) production of stable gp6; (2) interaction of gp6 with the minor capsid protein gp7; (3) incorporation of gp6 in the procapsid structure; (4) DNA packaging; and (5) sizing of the packaged DNA molecule. Most of the mutations fell in classes 3 and 4. This is the first high-resolution functional map of a portal protein, in which its function at different steps of viral assembly can be directly correlated with specific regions of its sequence. The work provides a framework for the understanding of central processes in the assembly of viruses that use specialized portals to govern entry and exit of DNA from the viral capsid.

Specific targeting of a DNA-binding protein to the SPP1 procapsid by interaction with the portal oligomer

The icosahedral procapsid of tailed bacteriophages is composed of a large number of identical subunits and of minor proteins found in a few copies. Proteins present in a very low copy number are targeted to the viral procapsid by an unknown mechanism. Bacteriophage SPP1 procapsids and mature virions contain two copies of gp7 on average. Gp7 forms stable complexes with the SPP1 portal protein gp6. Deletion of the gp6 carboxyl-terminus and the mutation Y467-->C localized in the same region prevent gp6-gp7 complex formation. Gp7 binds double-stranded and single-stranded DNA. Gp6 competes for this interaction, and purified gp6-gp7 complexes do not bind DNA. Procapsid structures assembled in the absence of gp6 or carrying the mutant gp6 Y467-->C lack gp7. The gp6-gp7 interaction thus targets gp7 to the procapsid where the portal protein is localized asymmetrically at a single vertex of the icosahedral structure. The interaction between the two proteins is disrupted during viral assembly. Proteins homologous to gp6 and gp7 are coded by contiguous genes in a variety of phage genomes from Gram-positive bacteria, suggesting that the gp6-gp7 complex is widespread in this group of phages. Transient association with the portal protein, an essential component of tailed bacteriophages and herpes viruses, provides a novel strategy to target minor proteins to the virion structure that might be operative in a large number of viruses.

Bacillus subtilis bacteriophage SPP1 DNA packaging motor requires terminase and portal proteins

Initiation of headful packaging of SPP1 DNA concatemers involves the interaction of the terminase, G1P and G2P, and the portal protein, G6P. G1P, which specifically recognizes the non-adjacent pacL and pacR subsites and directs loading of G2P to pacC, interacts with G6P. G2P, which has endonuclease, DNA binding, and ATPase activities, interacts with G1P and does it transiently with G6P. The stoichiometry of G1P on the G1P.G2P complex promotes the transition from a G2P endonuclease to an ATPase. G6P does not alter the endonuclease activity of G2P. Both G1P and G6P, which do not have endogenous ATPase activity, synergistically enhance and modulate the ATPase activity of G2P. Based on these results, we propose a model in which the modulation of the ATPase and endonuclease activities of G2P accounts for the role of the terminase in headful packaging.

Alterations of the portal protein, gpB, of bacteriophage lambda suppress mutations in cosQ, the site required for termination of DNA packaging

The cosQ site of bacteriophage lambda is required for DNA packaging termination. Previous studies have shown that cosQ mutations can be suppressed in three ways: by a local suppressor within cosQ, an increase in the length of the lambda chromosome, and missense mutations affecting the prohead's portal protein, gpB. In the present work, revertants of a set of lethal cosQ mutants were screened for suppressors. Seven new cosQ suppressors affected gene B, which encodes the portal protein of the prohead. All seven were allele-nonspecific suppressors of cosQ mutations. Experiments with several phages having two cosQ suppressors showed that the suppression effects were additive. Furthermore, these double suppressors had minimal effects on the growth of cosQ(+) phages. These trans-acting suppressors affecting the portal protein are proposed to allow the mutant cosQ site to be more efficiently recognized, due to the slowing of the rate of translocation.

Structural transformations accompanying the assembly of bacteriophage P22 portal protein rings in vitro

The Salmonella typhimurium bacteriophage P22 assembles an icosahedral capsid precursor called a procapsid. The oligomeric portal protein ring, located at one vertex, comprises the conduit for DNA entry and exit. In conjunction with the DNA packaging enzymes, the portal ring is an integral component of a nanoscale machine that pumps DNA into the phage head. Although the portal vertex is assembled with high fidelity, the mechanism by which a single portal complex is incorporated during procapsid assembly remains unknown. The assembly of bacteriophage P22 portal rings has been characterized in vitro using a recombinant, His-tagged protein. Although the portal protein remained primarily unassembled within the cell, once purified, the highly soluble monomer assembled into rings at room temperature at high concentrations with a half time of approximately 1 h. Circular dichroic analysis of the monomers and rings indicated that the protein gained alpha-helicity upon polymerization. Thermal denaturation studies suggested that the rings contained an ordered domain that was not present in the unassembled monomer. A combination of 4,4'-dianilino-1,1'-binapthyl-5,5'-disulfonic acid (bis-ANS) binding fluorescence studies and limited proteolysis revealed that the N-terminal portion of the unassembled subunit is meta-stable and is susceptible to structural perturbation by bis-ANS. In conjunction with previously obtained data on the behavior of the P22 portal protein, we propose an assembly model for P22 portal rings that involves a meta-stable monomeric subunit.