Intraoral galvanic corrosion: literature review and case report

Study of Al–SiO2 Aesthetic Composite Coating on Orthodontic Metal Archwire

Nickel–titanium orthodontic wires (NTWs) play an essential role in orthodontic treatment. However, their corrosion and aesthetic properties limit their applications. To improve the aesthetic effects of nickel–titanium orthodontic archwires, we prepared aluminium–silicon dioxide (Al–SiO2) as a biocompatible layer coated onto the NTWs. The Al–SiO2 coating was first fabricated using physical vapor deposition magnetron sputtering, and its physicochemical and biocompatibility properties were investigated. Al–SiO2 layers were well coated on the NTWs. The corrosion currents in the nickel–titanium (NiTi) control, Al–SiO2-coated NiTi experimental, stainless steel (SS) control and Al–SiO2-coated SS experimental groups were 23.72 μA cm−2, 1.21 μA cm−2, 0.22 μA cm−2 and 0.06 μA cm−2, respectively. Al–SiO2-coated NTWs with reduced corrosion current density indicated that the preparation of Al–SiO2 coating on the surface of NiTi and SS could reduce the tendency of electrochemical corrosion. The friction coefficients of orthodontic wires in the NiTi control, NiTi experimental, SS control, and SS experimental groups were 0.68, 0.46, 0.58 and 0.45, respectively. A low friction coefficient was observed in the Al–SiO2-coated NTWs, and the reduced friction coefficient improved the efficiency of orthodontics. Furthermore, the excellent biocompatibility of the NTWs and SS coated with Al–SiO2 indicates that Al–SiO2 as a novel aesthetic layer could improve the physicochemical properties of NTW and SS without causing cytotoxicity, which has considerable potential for modification of NTW and SS surfaces.

Solubility of dental core build-up materials in electric fields

Background/purpose

Over 250 years has been researched over the consequences of oral galvanism. Previous studies have already examined the influence on dental fixation materials. The aim of this study was to investigate the electro-chemical solubility behavior of different dental core build-up materials in a pseudo-realistic galvanic experimental setup.

Materials and methods

The composite Admira (Voco, Cuxhaven, Germany) and two glass ionomer cements, Ketac Molar and Photac (3M-Espe, Seefeld, Germany), were examined. Test specimens were exposed to electric field strengths of 10–27 V/m in 0.9% saline solution. After 1, 2, 3, and 24 h, 2 ml of the electrolyte was removed for analysis. Aluminum and calcium were selected as parameters to measure the solubility of the products. Differences between the test samples and controls were ascertained using the two sample t-test.

Results

For all of the test groups, Admira demonstrated minimal solubility compared to Ketac and Photac. However, after 24 h in an electric field of 27 V/m, Admira demonstrated the highest increase in solubility compared to the controls (3.47 vs control at 0.76 μmol/l). The second highest increase yielded the conventional glass ionomer cement Ketac (8.62 vs control at 5.28 μmol/l), and a minor increase in solubility showed the composite-based glass ionomer material Photac (38.73 vs control at 31.78 μmol/l) compared to the controls.

Conclusion

This study demonstrated that galvanic processes increase the solubility of glass ionomer and composite. Therefore, the time of storage, electric field strength, and contact of the material with the electrodes significantly influenced their solubility.

The Role of Oral Cavity Biofilm on Metallic Biomaterial Surface Destruction-Corrosion and Friction Aspects

Metallic biomaterials in the oral cavity are exposed to many factors such as saliva, bacterial microflora, food, temperature fluctuations, and mechanical forces. Extreme conditions present in the oral cavity affect biomaterial exploitation and significantly reduce its biofunctionality, limiting the time of exploitation stability. We mainly refer to friction, corrosion, and biocorrosion processes. Saliva plays an important role and is responsible for lubrication and biofilm formation as a transporter of nutrients for microorganisms. The presence of metallic elements in the oral cavity may lead to the formation of electro-galvanic cells and, as a result, may induce corrosion. Transitional microorganisms such as sulfate-reducing bacteria may also be present among the metabolic microflora in the oral cavity, which can induce biological corrosion. Microorganisms that form a biofilm locally change the conditions on the surface of biomaterials and contribute to the intensification of the biocorrosion processes. These processes may enhance allergy to metals, inflammation, or cancer development. On the other hand, the presence of saliva and biofilm may significantly reduce friction and wear on enamel as well as on biomaterials. This work summarizes data on the influence of saliva and oral biofilms on the destruction of metallic biomaterials.

Induction of apoptosis and up-regulation of cellular proliferation in oral leukoplakia cell lines inside electric field

OBJECTIVE

In dentistry, metallic alloys are used for dentures, restorative materials, and orthodontic devices. Electric voltages up to 950 mV may occur between different dental alloys in the oral cavity. This study aimed to investigate physiologic reactions of oral leukoplakia cells in vitro to electric fields.

STUDY DESIGN

A human leukoplakia cell line (MSK-LEUK1), cultivated in keratinocyte growth medium (KGM-2) supplemented with growth factors in 5% CO(2) humidified air at 37°C, was exposed to electric field strength of 1-20 V/m for 24 hours in a custom-made pulse chamber. The cells were then analyzed for proliferation with the use of BrdU assay and for apoptosis with the use of TUNEL assay. Findings were assessed with the use of fluorescent microscopy. Ultrastructural changes were studied by transmission electron microscopy.

RESULTS

Electric field strength of 1-10 V/m led to up-regulation of cell proliferation rate from 10.64% to 44.06% (P = .0001). The apoptotic index increased significantly (P = .0001) from 20.03% at 1 V/m to 46.56% at 10 V/m. Individual cell keratinization was seen in leukoplakia cells treated with 16 V/m.

CONCLUSIONS

Oral galvanism induces subcellular changes in oral precancer cells in vitro that closely simulate some of the morphologic features of oral squamous cell carcinoma cells in vivo.

Galvanic interaction between gold and amalgam

BACKGROUND

Previous studies have investigated the electrolytic action of oral electrogalvanism. However, the reasons why certain treatments or materials are successful in reducing galvanic current have not been addressed fully. This study assessed galvanic current with several materials, surface conditions and treatments.

METHODS

The authors measured galvanic currents between a type 3 cast gold alloy and Dispersalloy Dispersed Phase Alloy (zinc) (Dentsply Caulk, Milford, Del.) under different surface conditions using a zero-resistance-ammeter technique in a synthetic saliva solution for 10 hours. In addition, the galvanic currents between the same gold and Tytin alloy (non-zinc) (Kerr, Orange, Calif.), experimental zinc alloy (same makeup as that of Tytin, with the addition of zinc) and non-zinc dispersed-phase experimental alloy (essentially the same physical and chemical makeup as that of Dispersalloy, with the exclusion of zinc) were measured. Triplicate tests were performed for each condition.

RESULTS

The statistical analysis indicated that electrogalvanic activity is reduced significantly when the amalgam surface is treated with tin oxide or silver nitrate. Both zinc-containing amalgams in their as-carved condition exhibited higher anodic charge densities than did their zinc-free counterparts. Galvanic current measured in Dispersalloy was reduced with the passage of time after carving.

CONCLUSION

Galvanic interaction between cast gold and amalgam is reduced with time and surface treatments, but is increased considerably when the amalgam contains zinc.

CLINICAL IMPLICATIONS

Amalgam restorations containing zinc that are in contact with gold restorations occasionally elicit galvanic pain. Selection of a non-zinc-containing amalgam will reduce the level of galvanic interaction. Galvanic pain from occlusal contact is reduced or eliminated when the restoration is brushed with tin oxide immediately after carving or is treated with 2 percent silver nitrate. Some patients may benefit from having their teeth separated with nonconducting rubber dam material.