The precipitation of monomers during the erosion of a class of polyanhydrides

Cytotoxicity of dental self-curing resin for a temporary crown: an in vitro study

BACKGROUND

Residual monomer tests using high-performance liquid chromatography and cytotoxicity tests were performed to analyze the effect on the oral mucosa of a self-curing resin for provisional crown production.

METHODS

A cytotoxicity test was performed to confirm whether leaked residual monomers directly affected oral mucosal cells. The cytotoxicity of the liquid and solid resin polymers was measured using a water-soluble tetrazolium (WST) test and microplate reader.

RESULTS

In the WST assay using a microplate reader, 73.4% of the cells survived at a concentration of 0.2% liquid resin polymer. The cytotoxicity of the liquid resin polymer was low at ≤0.2%. For the solid resins, when 100% of the eluate was used from each specimen, the average cell viability was 91.3% for the solid resin polymer and 100% for the hand-mixed self-curing resin, which is higher than the cell viability standard of 70%. The cytotoxicity of the solid resin polymer was low.

CONCLUSION

Because the polymerization process of the self-curing resin may have harmful effects on the oral mucosa during the second and third stages, the solid resin should be manufactured indirectly using a dental model.

Journey to the Market: The Evolution of Biodegradable Drug Delivery Systems

Biodegradable polymers have been used as carriers in drug delivery systems for more than four decades. Early work used crude natural materials for particle fabrication, whereas more recent work has utilized synthetic polymers. Applications include the macroscale, the microscale, and the nanoscale. Since pioneering work in the 1960’s, an array of products that use biodegradable polymers to encapsulate the desired drug payload have been approved for human use by international regulatory agencies. The commercial success of these products has led to further research in the field aimed at bringing forward new formulation types for improved delivery of various small molecule and biologic drugs. Here, we review recent advances in the development of these materials and we provide insight on their drug delivery application. We also address payload encapsulation and drug release mechanisms from biodegradable formulations and their application in approved therapeutic products.

Poly(anhydride-ester) fibers: Role of copolymer composition on hydrolytic degradation and mechanical properties

Poly(anhydride-esters), based on carboxyphenoxydecanoate (CPD), are biocompatible polymers that hydrolytically degrade. The mechanical properties of the poly(anhydride-esters) can be altered by copolymerization with para-carboxyphenoxyhexane (pCPH). Mechanical properties of three CPD:pCPH compositions (30:70, 40:60, and 50:50) are reported as a function of hydrolytic degradation. The mechanical characteristics evaluated were tensile modulus at 1% strain (E(1%)), tensile strength (sigma(B)), ultimate elongation (epsilon(B)), and toughness (E(r)). The 30:70 CPD:pCPH fibers maintained higher values for tensile modulus at all time points than the two other fiber compositions. In addition, the 30:70 CPD:pCPH fibers maintained lower values for both tensile strength and toughness than the two other fiber compositions. These phenomena resulted from the brittle nature of pCPH, the major component of the 30:70 CPD:pCPH fibers; increasing the pCPH concentration in the polymer lowers both tensile strength and toughness of the polymer by decreasing ductility. With increasing amounts of pCPH, the hydrolytic degradation occurred more slowly, as reflected in the copolymers' improved ability to retain their mechanical properties. Therefore, copolymerization is useful for controlling the mechanical properties of the fibers as well as the polymer degradation rate, which ultimately determines the rate at which physically or chemically encapsulated drugs can be released.

Polyanhydride degradation and erosion

It was the intention of this paper to give a survey on the degradation and erosion of polyanhydrides. Due to the multitude of polymers that have been synthesized in this class of material in recent years, it was not possible to discuss all polyanhydrides that have gained in significance based on their application. It was rather the intention to provide a broad picture on polyanhydride degradation and erosion based on the knowledge that we have from those polymers that have been intensively investigated. To reach this goal this review contains several sections. First, the foundation for an understanding of the nomenclature are laid by defining degradation and erosion which was deemed necessary because many different definitions exist in the current literature. Next, the properties of major classes of anhydrides are reviewed and the impact of geometry on degradation and erosion is discussed. A complicated issue is the control of drug release from degradable polymers. Therefore, the aspect of erosion-controlled release and drug stability inside polyanhydrides are discussed. Towards the end of the paper models are briefly reviewed that describe the erosion of polyanhydrides. Empirical models as well as Monte-Carlo-based approaches are described. Finally it is outlined how theoretical models can help to answer the question why polyanhydrides are surface eroding. A look at the microstructure and the results from these models lead to the conclusion that polyanhydrides are surface eroding due to their fast degradation. However they switch to bulk erosion once the device dimensions drop below a critical limit.

Poly(fumaric-co-sebacic anhydride). A degradation study as evaluated by FTIR, DSC, GPC and X-ray diffraction

The degradation of three poly(fumaric-co-sebacic anhydride) [P(FA:SA)] copolymers is examined in a composition of microspheres made by the hot melt encapsulation process. The emergence of low molecular weight oligomers occurs during degradation of the copolymer microspheres, as evidenced by a variety of characterization methods. Characterization was conducted to determine the extent of degradation of the polyanhydride microspheres using Fourier-transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and X-ray diffraction. It is demonstrated that degradation of P(FA:SA) is greatly accelerated at basic pH, yet there is little difference between degradation in neutral and acidic buffers. A good correlation exists between the results of each characterization method, which allows a better understanding of the degradation process and the resulting formation of low molecular weight oligomers in poly(fumaric-co-sebacic anhydride).