Stabilizing effect of divalent metal ions on virions of southern bean mosaic virus

All-Atom Molecular Dynamics Simulations of Whole Viruses

Classical molecular dynamics modeling of whole viruses or their capsids in explicit water is discussed, and known examples from the literature are analyzed. Only works on all-atom modeling in explicit water are included. Physical chemistry of the whole system is the focus, which includes the structure and dynamics of the biomolecules as well as water and ion behavior in and around the virus particle. It was demonstrated that in most investigations molecular phenomena that currently can not be studied experimentally are successfully reproduced and explained by the simulations. These include, for example, transport and distribution of ions inside viruses that ultimately connected to their stability, the hydrodynamic pressure in the capsid related to viruses' elastic properties, the role of metal ions in virus swelling, and others. Current and future tendencies in the development of all-atom virus simulations are outlined.

Electrostatics-Driven Inflation of Elastic Icosahedral Shells as a Model for Swelling of Viruses

We develop a clear theoretical description of radial swelling in virus-like particles that delineates the importance of electrostatic contributions to swelling in the absence of any conformational changes. The model couples the elastic parameters of the capsid-represented as a continuous elastic shell-to the electrostatic pressure acting on it. We show that different modifications of the electrostatic interactions brought about by, for instance, changes in pH or solution ionic strength are often sufficient to achieve the experimentally observed swelling (∼10% of the capsid radius). Additionally, we derive analytical expressions for the electrostatics-driven radial swelling of virus-like particles that enable one to quickly estimate the magnitudes of physical quantities involved.

Role of Protein Charge Density on Hepatitis B Virus Capsid Formation

The role of electrostatic interactions in the viral capsid assembly process was studied by comparing the assembly process of a truncated hepatitis B virus capsid protein Cp149 with its mutant protein D2N/D4N, which has the same conformational structure but four fewer charges per dimer. The capsid protein self-assembly was investigated under a wide range of protein surface charge densities by changing the protein concentration, buffer pH, and solution ionic strength. Lowering the protein charge density favored the capsid formation. However, lowering charge beyond a certain point resulted in capsid aggregation and precipitation. Interestingly, both the wild-type and D2N/D4N mutant displayed identical assembly profiles when their charge densities matched each other. These results indicated that the charge density was optimized by nature to ensure an efficient and effective capsid proliferation under the physiological pH and ionic strength.

Reversible swelling of SBMV is associated with reversible disordering

The structures of the compact and swollen southern bean mosaic virus (SBMV) particles have been compared by X-ray diffraction and proton magnetic resonance (PMR). Small-angle X-ray scattering showed that removal of divalent cations at alkaline pH causes the particle diameter to increase from 289 Å in the native SBMV by 12% in solution and by 9% in microcrystals. The swelling is fully reversible upon re-addition of Ca²⁺ and Mg²⁺ ions, as shown by the X-ray patterns at 6 Å resolution and by the 270 MHz PMR spectra. Beyond 30 Å resolution, X-ray patterns from the compact SBMV in solution and in microcrystals show fine fringes of ∼1/225 Å⁻¹ width extending to 6 Å resolution, whereas patterns from the swollen SBMV in solution and in microcrystals show only broader fringes of ∼1/90 Å⁻¹ width, Model calculations demonstrate that the fine fringes from compact SBMV arise from regular packing of the protein subunits on the icosahedral surface lattice; the smearing of fine fringes in the swollen virus pattern can be simulated by uncorrelated displacements of pentamers and hexamers of protein subunits, with a standard deviation of 6 Å from their mean locations. The PMR spectrum of compact SBMV is poorly resolved, whereas PMR spectrum of swollen SBMV shows sharp resonances in the methyl proton region. The line-narrowing for a fraction of the aliphatic protons upon swelling cannot be accounted for by rotational relaxation of the particle of 6 × 10⁶ MW, but must be attributed to internal motion in small regions of the protein subunits.

Overview on Sobemoviruses and a Proposal for the Creation of the Family Sobemoviridae

The genus Sobemovirus, unassigned to any family, consists of viruses with single-stranded plus-oriented single-component RNA genomes and small icosahedral particles. Currently, 14 species within the genus have been recognized by the International Committee on Taxonomy of Viruses (ICTV) but several new species are to be recognized in the near future. Sobemovirus genomes are compact with a conserved structure of open reading frames and with short untranslated regions. Several sobemoviruses are important pathogens. Moreover, over the last decade sobemoviruses have become important model systems to study plant virus evolution. In the current review we give an overview of the structure and expression of sobemovirus genomes, processing and functions of individual proteins, particle structure, pathology and phylogenesis of sobemoviruses as well as of satellite RNAs present together with these viruses. Based on a phylogenetic analysis we propose that a new family Sobemoviridae should be recognized including the genera Sobemovirus and Polemovirus. Finally, we outline the future perspectives and needs for the research focusing on sobemoviruses.

Giant hollow M(n)L(2n) spherical complexes: structure, functionalisation and applications

Drawing inspiration from the self-assembly of hollow spherical virus capsids and protein cages found in nature, a family of roughly spherical coordination polyhedra with general formula MnL2n was designed and several members of the series have been synthesised. These spherical complexes are self-assembled upon reaction of bent bis(pyridine) ligands with Pd(2+) ions. The introduction of functional side chains into the ligands is straightforward, making the synthesis of both exo- and endohedrally functionalised spherical complexes possible. Accumulation of a high density of functional groups at the periphery of the spherical framework results in an enhancement of the weak interactions used in biomolecular recognition processes and the strong and selective interaction of the complex with a variety of substrates. Discrete and well-defined environments are generated within the spherical framework by functionalisation of the interior of the complex. These environments can be used for the selective encapsulation of guest molecules, including species as diverse as simple metal ions, fluoroalkanes and fullerenes. The well-defined cavity of the spherical complexes can also be exploited for the synthesis of precisely size-controlled nanoparticles and polymers. Most recently, a protein was successfully enclosed within a hollow self-assembled spherical complex, with a long-term view towards the control of protein functions for the development of new applications.

Primary changes of the mechanical properties of Southern Bean Mosaic Virus upon calcium removal

The mechanical properties of viral shells are crucial determinates for the pathway and mechanism by which the genetic material leaves the capsid during infection and have therefore been studied by atomic force microscopy as well as by atomistic simulations. The mechanical response to forces from inside the capsid are found to be relevant, especially after ion removal from the shell structure, which is generally assumed to be essential during viral infection; however, atomic force microscopy measurements are restricted to probing the capsids from outside, and the primary effect of ion removal is still inaccessible. To bridge this gap, we performed atomistic force-probe molecular dynamics simulations of the complete solvated icosahedral shell of Southern Bean Mosaic Virus and compared the distribution of elastic constants and yielding forces on the icosahedral shell for probing from inside with the distribution of outside mechanical properties obtained previously. Further, the primary effect of calcium removal on the mechanical properties on both sides, as well as on their spatial distribution, is quantified. Marked differences are seen particularly at the pentamer centers, although only small structural changes occur on the short timescales of the simulation. This unexpected primary effect, hence, precedes subsequent effects due to capsid swelling. In particular, assuming that genome release is preceded by an opening of capsomers instead of a complete capsid bursting, our observed weakening along the fivefold symmetry axes let us suggest pentamers as possible exit ports for RNA release.

Mechanical properties of the icosahedral shell of southern bean mosaic virus: a molecular dynamics study

The mechanical properties of viral shells are crucial for viral assembly and infection. To study their distribution and heterogeneity on the viral surface, we performed atomistic force-probe molecular dynamics simulations of the complete shell of southern bean mosaic virus, a prototypical T = 3 virus, in explicit solvent. The simulation system comprised more than 4,500,000 atoms. To facilitate direct comparison with atomic-force microscopy (AFM) measurements, a Lennard-Jones sphere was used as a model of the AFM tip, and was pushed with different velocities toward the capsid protein at 19 different positions on the viral surface. A detailed picture of the spatial distribution of elastic constants and yielding forces was obtained that can explain corresponding heterogeneities observed in previous AFM experiments. Our simulations reveal three different deformation regimes: a prelinear regime of outer surface atom rearrangements, a linear regime of elastic capsid deformation, and a rearrangement regime that describes irreversible structural changes and the transition from elastic to plastic deformation. For both yielding forces and elastic constants, a logarithmic velocity dependency is evident over nearly two decades, the explanation for which requires including nonequilibrium effects within the established theory of enforced barrier crossing.

Southern bean mosaic virus-specific proteins are synthesized in an in vitro system supplemented with intact, treated virions

RNA encapsidated in icosahedral particles of southern bean mosaic virus (SBMV) can act as a template for protein synthesis in an mRNA-dependent rabbit reticulocyte cell-free translation system, following dialysis of virions against mildly alkaline buffers. Exposure of the SBMV RNA template occurs only after addition of virus particles to the translation system and appears not to involve complete disruption of the protective SBMV capsid.

Disassembly of African cassava mosaic virus

The plant-infecting geminiviruses encapsidate their single-stranded DNA genome in characteristic twinned particles that are unique among viruses. These particles are formed by joining two incomplete T=1 icosahedra. African cassava mosaic virions were purified by density-gradient centrifugation from infected Nicotiana benthamiana plants and analysed for their stability with respect to pH changes and heat treatment by using electron microscopy. Negative staining and rotary shadowing revealed stable virions as well as isolated capsomeres between pH 4.0 and 8.5. At pH 9.0 and above, particles disintegrated, whereas they mainly aggregated at a pH below 6.0. Heating the preparations to 55 degrees C and above resulted in the complete loss of any discernible structure. A low proportion (approx. 10 %) of particles ejected their DNA within the pH range of 6.0-8.5. Most virions released their DNA at the top (15.9 %) or the shoulder (71.4 %) of the twin particles and only 12.7 % at the waist. Compared with the expected numbers of pentameric capsomeres at the top (9 %), the shoulder (45.5 %) or the waist (45.5 %), the results revealed a preferential DNA release from the top and shoulder of the geminate particle.

Intermediates of the in vitro assembly and disassembly of southern bean mosaic virus

Southern bean mosaic virus (SBMV) was swollen by treatment with EDTA at pH 7.5 and dissociated into RNA and protein in 1 M NaCl. Aliquots of this preparation were diluted with appropriate buffers to obtain samples in varying concentrations of NaCl, and components of these samples were sedimented through sucrose solutions and dissolved in 0.01 M Tris-HCI buffer, pH 7.5. The protein content and sedimentation properties of components in these preparations were determined. When the NaCl molarity in the treatment exceeded 0.6 M the preparations contained RNA with approximately six protein subunits per SBMV RNA molecule. The protein content of the preparations increased from 30 protein subunits per RNA molecule to 145 protein subunits per RNA molecule as the NaCl molarity used in the treatment was decreased from 0.5 to 0.1 M. The positions of sedimentation of components in these preparations in density gradient centrifugation were intermediate between those of RNA and EDTA-swollen virus. The sedimentation rate of these assembled components increased as the NaCl molarity used in the treatment was decreased. Similar components were assembled when preparations of RNA and protein dissociated from SBMV by dialysis in neutral buffers containing EDTA and 1 M NaCl were diluted to lower NaCl molarities. When SBMV was swollen by treatment with EDTA and dissociated in various concentrations of NaCl, the components formed were similar to those obtained by assembly in the same NaCl molarities. Preparations in the pH 7.5 buffer contained single components which sedimented at 56 S, 55 S, 54 S, 51 S, 46 S, 38 S, 33 S, and 24 S. With the exception of the 24 S component, components formed by disassembly in the same NaCl molarities and dissolved in pH 5.0 buffer sedimented faster.

The three-dimensional structure of ryegrass mottle virus at 2.9 A resolution

The crystal structure of the sobemovirus Ryegrass mottle virus (RGMoV) has been determined at 2.9 A resolution. The coat protein has a canonical jellyroll beta-sandwich fold. In comparison to other sobemoviruses the RGMoV coat protein is missing several residues in two of the loop regions. The first loop contributes to contacts between subunits around the quasi-threefold symmetry axis. The altered contact interface results in tilting of the subunits towards the quasi-threefold axis. The assembly of the T=3 capsid of sobemoviruses is controlled by the N-termini of C subunits forming a so-called beta-annulus. The other loop that is smaller in the RGMoV structure contains a helix that participates in stabilization of the beta-annulus in other sobemoviruses. The loss of interaction between the RGMoV loop and the beta-annulus has been compensated for by additional interactions between the N-terminal arms. As a consequence of these differences, the diameter of the RGMoV particle is 8 A smaller than that of the other sobemoviruses. The interactions of coat proteins in sobemovirus capsids involve calcium ions. Depletion of calcium ions results in particle swelling, which is considered a first step in disassembly. We could not identify any density for metal ions in the proximity of the conserved residues normally involved in calcium binding, but the RGMoV structure does not show any signs of swelling. A likely reason is the low pH (3.0) of the crystallization buffer in which the groups interacting with the calcium ions are not charged.

Divalent ion-dependent swelling of Tomato Bushy Stunt Virus: A multi-approach study

Time-resolved small-angle X-ray and neutron scattering (SAXS and SANS) in solution were used to study the swelling reaction of TBSV upon chelation of its constituent calcium at mildly basic pH. SAXS intensities comprise contribution from the protein capsid and the RNA moiety, while neutron scattering, recorded in 72% D2O, is essentially due to the protein capsid. Cryo-electron micrographs of compact and swollen virus were used to produce 3D reconstructions of the initial and final conformations of the virus at a resolution of 13 A and 19 A, respectively. While compact particles appear to be very homogeneous in size, solutions of swollen particles exhibit some size heterogeneity. A procedure has been developed to compute the SAXS pattern from the 3D reconstruction for comparison with experimental data. Cryo-electron microscopy thereby provides an invaluable starting (and ending) point for the analysis of the time-resolved swelling process using the scattering data.

Analysis of the systemic colonization of cucumber plants by Cucumber green mottle mosaic virus

Systemic movement of Cucumber green mottle mosaic virus (CGMMV) in cucumber plants was shown to be from photoassimilate source to sink, thus indicating phloem transport. Nevertheless, CGMMV was not detected by immunocytochemical procedures in the intermediary cell-sieve element complex in inoculated cotyledons, where photoassimilate loading occurs. In stem internodes, CGMMV was first localized in the companion cells of the external phloem and subsequently in all tissues except the medulla, therefore suggesting leakage of the virus from, and reloading into, the transport phloem during systemic movement. In systemically infected sink leaves, CGMMV was simultaneously detected in the xylem and phloem. Interestingly, CGMMV accumulated to high levels in the differentiating tracheids of young leaves implying that the xylem could be involved in the systemic movement of CGMMV. This possibility was tested using plants in which cell death was induced in a portion of the stem by steam treatment. At 24 degrees C, steam treatment effectively prevented the systemic movement of CGMMV, even though viral RNA was detected in washes of the xylem above the steamed internode suggesting that xylem circulation occurred. At 29 degrees C, CGMMV systemically infected steam-treated cucumber plants, indicating that CGMMV can move systemically via the xylem. Xylem transport of CGMMV was, however, less efficient than phloem transport in terms of the time required for systemic infection and the percentage of plants infected.

Pseudo-atomic models of swollen CCMV from cryo-electron microscopy data

The capsid of cowpea chlorotic mottle virus (CCMV) can reversibly switch between two forms that are contingent on the charge of acidic residues that are clustered at the quasi-threefold axes of the T=3 icosahedral particle. The quaternary structure conformations are dependent on divalent metal ions and pH and were previously analyzed by crystallography in the native, compact form, and by cryo-electron microscopy in the compact and swollen forms (Speir et al., 1995). In this report we use the atomic models of the three structurally unique viral subunits determined by crystallography for a detailed interpretation of the 28-A-resolution electron density of the swollen form and the production of a pseudo-atomic model of this particle. The model of the quaternary structure conforms with high fidelity to conventional geometric constraints, quasi-equivalence, intersubunit association energies, and the electron density. It was derived by conserving the pentamers and hexamers of subunits whose associated electron densities are strikingly similar in the two forms of the particles. Treating these as rigid units in the modeling implies that the particle flexibility is accommodated primarily by changes in dimer interactions, an observation that is consistent with the flexible C-terminal polypeptide extensions that stabilize this contact in the crystal structure. Because the hexamers and pentamers were incrementally translated and rotated in a screw motion, with energy minimization at each of 28 steps, a path for the expansion is also implied.

Stability of rice yellow mottle virus and cellular compartmentalization during the infection process in Oryza sativa (L.)

Rice yellow mottle virus (RYMV) is icosahedral in morphology and known to swell in vitro, but the biological function of swollen particles remains unknown. Anion-exchange chromatography was used to identify three markedly stable forms of RYMV particles from infected plants: (1) an unstable swollen form lacking Ca2+ and dependent upon basic pH; (2) a more stable transitional form lacking Ca2+ but dependent upon acidic pH; and (3) a pH-independent, stable, compact form containing Ca2+. Particle stability increased over the time course of infection in rice plants: transitional and swollen forms were abundant during early infection (2 weeks postinfection), whereas compact forms increased during later stages of infection. Electron microscopy of infected tissue revealed virus particles in vacuoles of xylem parenchyma and mesophyll cells early in the time course of infection and suggested that vacuoles and other vesicles were the major storage compartments for virus particles. We propose a model in which virus maturation is associated with the virus accumulation in vacuoles. In this acidic compartment, virus particles may bind Ca2+ to produce a highly stable, compact form of the virus. The localization of subcellular RYMV isoforms in infected cells and the corresponding biological properties of the virus are discussed.

The mechanism and pathway of pH induced swelling in cowpea chlorotic mottle virus

Normal mode analysis based on a simplified energy function was used to study the swelling process of the icosahedral virus, cowpea chlorotic mottle virus (CCMV). Native state virus particles (coat proteins) of this T=3 icosahedral virus have been shown to undergo a large conformational change to a swollen state when metal ions are removed or the pH is raised. A normal mode analysis based on the native state capsid showed one preferential direction, a breathing mode, that explains the majority of the structural rearrangement necessary to bring the native structure close to the swollen state. From the native form of CCMV, the structure can be displaced along the direction of a single breathing mode by different amounts to create several candidate swollen structures and a putative pathway for virus expansion. The R-factor between these predicted swollen capsid structures and experimental electron density from cryoelectron microscopy (cryo-EM) measurements is then calculated to indicate how well each structure satisfies the experimental measurements on the swollen capsid state. A decrease of the crystallographic R-factor value from approximately 72% to approximately 49% was observed for these simple incremental displacements along the breathing mode. The simultaneous displacement of the native structure along other relevant (symmetric, non-degenerate) modes produce a structure with an R-factor of 45%, which is further reduced to 43.9% after minimization: a value in good accord with models based on the EM data at 28 A resolution. Based on the incrementally expanded structures, a pathway for the swelling process has been proposed. Analysis of the intermediate structures along this pathway indicates a significant loss of interactions at the quasi-3-fold interfaces occurs in the initial stages of the swelling process and this serves as a trigger for the compact to swollen transition. Furthermore, the pH dependent swelling appears to be triggered by the titration of a single residue with an anomalous pK(a) value in the unswollen particle.

Membrane activity of the southern cowpea mosaic virus coat protein: the role of basic amino acids, helix-forming potential, and lipid composition

Southern cowpea mosaic virus (SCPMV) is a spherical RNA virus with T = 3 icosahedral symmetry. The particle is composed of 180 subunits of the coat protein (CP) and one copy of the positive-sense viral RNA. The CP has two domains, the random (R) domain formed by the N-terminal 64 aa and the shell (S) domain (aa 65--260). The R domain is highly charged, with 11 of the N-terminal 30 residues being basic. It is localized to the interior of the native particle where it may interact with the viral RNA, but under certain pH and salt conditions the topology of the particle changes to externalize the R domain. Since the CPs of several spherical RNA viruses have been shown to interact with host membranes during infection, we have begun investigating the membrane interactions of the SCPMV CP using the artificial liposome membranes. Both the native CP and the R domain overexpressed in Escherichia coli were observed to interact with liposomes. The interaction between the R domain and liposomes required either anionic phospholipids or non-bilayer-forming lipids and involved electrostatic interactions since it was shown to be both pH and ionic strength dependent. The analysis of four different deletion and six different site-directed substitution mutations partially mapped the region responsible for this interaction to residues 1--30. Analysis of this region of the R domain by circular dichroism indicated that it assumes an alpha-helical structure when exposed to liposomes composed of anionic lipids. Mutations, which extend the helical nature of this region, promoted an increased interaction. The possible role of the CP/lipid interaction in the SCPMV infection is discussed.

Detecting structural changes in viral capsids by hydrogen exchange and mass spectrometry

Amide hydrogen exchange and mass spectrometry have been used to study the pH-induced structural changes in the capsid of brome mosaic virus (BMV). Capsid protein was labeled in a structurally sensitive way by incubating intact viral particles in D(2)O at pH 5.4 and 7.3. Deuterium levels in the intact coat protein and its proteolytic fragments were determined by mass spectrometry. The largest deuterium increases induced by structural alteration occurred in the regions around the quasi-threefold axes, which are located at the center of the asymmetric unit. The increased levels of deuterium indicate loosening of structure in these regions. This observation confirms the previously proposed swelling model for BMV and cowpea chlorotic mottle virus (CCMV) and is consistent with the structure of swollen CCMV recently determined by cryo-electron microscopy and image reconstruction. Structural changes in the extended N- and C-terminal arms were also detected and compared with the results obtained with other swollen plant viruses. This study demonstrates that protein fragmentation/amide hydrogen exchange is a useful tool for probing structural changes in viral capsids.

Structure of native and expanded sobemoviruses by electron cryo-microscopy and image reconstruction

Rice yellow mottle virus (RYMV) and southern bean mosaic virus, cowpea strain (SCPMV) are members of the Sobemovirus genus of RNA-containing viruses. We used electron cryo-microscopy (cryo-EM) and icosahedral image analysis to examine the native structures of these two viruses at 25 A resolution. Both viruses have a single tightly packed capsid layer with 180 subunits assembled on a T=3 icosahedral lattice. Distinctive crown-like pentamers emanate from the 12 5-fold axes of symmetry. The exterior face of SCPMV displays deep valleys along the 2-fold axes and protrusions at the quasi-3-fold axes. While having a similar topography, the surface of RYMV is comparatively smooth. Two concentric shells of density reside beneath the capsid layer of RYMV and SCPMV, which we interpret as ordered regions of genomic RNA. In the presence of divalent cations, SCPMV particles swell and fracture, whereas the expanded form of RYMV is stable. We previously proposed that the cell-to-cell movement of RYMV in xylem involves chelation of Ca(2+) from pit membranes of infected cells, thereby stabilizing the capsid shells and allowing a pathway for spread of RYMV through destabilized membranes. In the context of this model, we propose that the expanded form of RYMV is an intermediate in the in vivo assembly of virions.

Movement of rice yellow mottle virus between xylem cells through pit membranes

The translocation of rice yellow mottle virus (RYMV) within tissues of inoculated and systemically infected Oryza sativa L. leaves was characterized by Western immunoblotting, Northern blotting, and electron microscopy of thin sections. In inoculated leaves, RYMV RNA and coat protein first were detected at 3 and 5 days postinoculation, respectively. By 6 days postinoculation, RYMV had spread systemically to leaves, and virus particles were observed in most cell types, including epidermal, mesophyll, bundle sheath, and vascular parenchyma cells. Most of the virions accumulated in large crystalline patches in xylem parenchyma cells and sieve elements. Colocalization of a cell wall marker for cellulosic beta-(1-4)-D-glucans and anti-RYMV antibodies over vessel pit membranes suggests a pathway for virus migration between vessels. We propose that the partial digestion of pit membranes resulting from programmed cell death may permit virus migration through them, concomitant with autolysis. In addition, displacement of the Ca2+ from pit membranes to virus particles may contribute to the disruption of the pit membranes and facilitate systemic virus transport.

Expression of the human papillomavirus type 11 L1 capsid protein in Escherichia coli: characterization of protein domains involved in DNA binding and capsid assembly

The L1 major capsid protein of human papillomavirus type 11 (HPV-11) was expressed in Escherichia coli, and the soluble recombinant protein was purified to near homogeneity. The recombinant L1 protein bound DNA as determined by the Southwestern assay method, and recombinant mutant L1 proteins localized the DNA-binding domain to the carboxy-terminal 11 amino acids of L1. Trypsin digestion of the full-length L1 protein yielded a discrete 42-kDa product (trpL1), determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, resulting from cleavage at R415, 86 amino acids from the L1 carboxy terminus. Sucrose gradient sedimentation analysis demonstrated that trpL1 sedimented at 11S, while L1 proteins with amino-terminal deletions of 29 and 61 residues sedimented at 4S. Electron microscopy showed that the full-length L1 protein appeared as pentameric capsomeres which self-assembled into capsid-like particles. The trpL1 protein also had a pentameric morphology but was unable to assemble further. In an enzyme-linked immunosorbent assay, the trpL1 and L1 capsids reacted indistinguishably from virus-like particles purified after expression of HPV-11 L1 in insect cells. The carboxy terminus of L1 therefore constitutes the interpentamer linker arm responsible for HPV-11 capsid formation, much like the carboxy-terminal domain of the polyomavirus VP1 protein. The trypsin susceptibility of HPV-11 L1 capsids suggests a possible mechanism for virion disassembly.

Structures of the native and swollen forms of cowpea chlorotic mottle virus determined by X-ray crystallography and cryo-electron microscopy

BACKGROUND

RNA-protein interactions stabilize many viruses and also the nucleoprotein cores of enveloped animal viruses (e.g. retroviruses). The nucleoprotein particles are frequently pleomorphic and generally unstable due to the lack of strong protein-protein interactions in their capsids. Principles governing their structures are unknown because crystals of such nucleoprotein particles that diffract to high resolution have not previously been produced. Cowpea chlorotic mottle virions (CCMV) are typical of particles stabilized by RNA-protein interactions and it has been found that crystals that diffract beyond 4.5 A resolution are difficult to grow. However, we report here the purification of CCMV with an exceptionally mild procedure and the growth of crystals that diffract X-rays to 3.2 A resolution.

RESULTS

The 3.2 A X-ray structure of native CCMV, an icosahedral (T = 3) RNA plant virus, shows novel quaternary structure interactions based on interwoven carboxyterminal polypeptides that extend from canonical capsid beta-barrel subunits. Additional particle stability is provided by intercapsomere contacts between metal ion mediated carboxyl cages and by protein interactions with regions of ordered RNA. The structure of a metal-free, swollen form of the virus was determined by cryo-electron microscopy and image reconstruction. Modeling of this structure with the X-ray coordinates of the native subunits shows that the 29 A radial expansion is due to electrostatic repulsion at the carboxyl cages and is stopped short of complete disassembly by preservation of interwoven carboxyl termini and protein-RNA contacts.

CONCLUSIONS

The CCMV capsid displays quaternary structural interactions that are unique compared with previously determined RNA virus structures. The loosely coupled hexamer and pentamer morphological units readily explain their versatile reassembly properties and the pH and metal ion dependent polymorphism observed in the virions. Association of capsomeres through inter-penetrating carboxy-terminal portions of the subunit polypeptides has been previously described only for the DNA tumor viruses, SV40 and polyoma.

Nucleotide sequence of the bean strain of southern bean mosaic virus

The genome of the bean strain of southern bean mosaic virus (SBMV-B) comprises 4109 nucleotides and thus is slightly shorter than those of the two other sequenced sobemoviruses (southern bean mosaic virus, cowpea strain (SBMV-C) and rice yellow mottle virus (RYMV)). SBMV-B has an overall sequence similarity with SBMV-C of 55% and with RYMV of 45%. Three potential open reading frames (ORFs) were recognized in SBMV-B which were in similar positions in the genomes of SBMV-C and RYMV. However, there was no analog of SBMV-C and RYMV ORF 3. From a comparison of the predicted sequences of the ORFs of these three sobemoviruses and of the noncoding regions, it is suggested that the two SBMV strains differ from one another as much as they do from RYMV and that they should be considered as different viruses.

Calcium chelation induces a conformational change in recombinant herpes simplex virus-1-expressed rotavirus VP7

Rotavirus, strain SA11, glycoprotein VP7 that was expressed by a recombinant herpes simplex virus-1 or contained in purified rotavirus particles lost reactivity with the neutralizing monoclonal antibody (mAb) 159, but not with nonneutralizing mAbs, upon chelation of calcium by EGTA. Exposing VP7, but not the neutralizing mAbs, to a transient excess of EGTA over calcium eliminated VP7 neutralizing epitopes. Therefore, a calcium chelation-induced conformational change in VP7, not in the neutralizing mAbs, caused the epitope loss. Addition of excess calcium or strontium, but not magnesium or barium, to EGTA-treated VP7 restored its 159 epitope. These results suggest that VP7 binds calcium in the absence of other rotavirus proteins and that the calcium chelation-induced conformational change in VP7 may mediate uncoating of double-shelled rotavirus particles.

Southern bean mosaic virus RNA remains associated with swollen virions during translation in wheat germ cell-free extracts

L-[35S]Methionine-labeled translation complexes were prepared by incubating either swollen intact southern bean mosaic virus (SBMV) particles or unencapsidated SBMV RNA in a wheat germ extract. The complexes were analysed by sucrose gradient centrifugation and by electron microscopy and dot blot hybridization of fractions from these gradients. In these complexes, 80 S ribosomes appeared to be associated with intact or near intact particles, suggesting that SBMV particles disassemble only after their RNA has initiated translation. This is in contrast to some other isometric viruses, such as turnip yellow mosaic virus, which appear to release their RNA rapidly prior to translation.

Pressure-induced dissociation of brome mosaic virus

Brome mosaic virus reversibly dissociates into subunits in the pressure range of 600 x 10(5) to 1600 x 10(5) Pa, as demonstrated by studies of the spectral shift of intrinsic fluorescence, of filtration chromatography and of electron microscopy of samples fixed under pressure. Smaller shell particles (T = 1) were detected as intermediates in the dissociation pathway. Dissociation was facilitated by decreasing the concentration, as expected for a multimolecular reaction. The estimated change in volume upon dissociation into 90 dimer particles was -2960 ml/mol. Large increases in the intrinsic fluorescence intensity and in the binding of bis(8-anilinonaphthalene-1-sulfonate) occurred at pressures higher than 1400 x 10(5) Pa. The pressure-dependence profile of the different spectral properties shifted to lower pressures when 5 mM-MgCl2 was included in the buffer or when the pH was raised from 5.5 to 5.9. When the pressure was progressively increased above 1400 x 10(5) Pa, a value that led to 75% dissociation, the capsid subunits lost the ability to reassociate into regular shells and only amorphous aggregates were formed after decompression, as evidenced by both electron microscopy and gel filtration chromatography. The formation of these random aggregates of brome mosaic virus can be explained by a conformational drift of the separated subunits, similar in nature to that found in simpler oligomeric proteins.

The dynamical structure of the RNA in alfalfa mosaic virus studied by 31P-nuclear magnetic resonance

The structure of the viral RNA in alfalfa mosaic virus (AlMV) was investigated by means of 31P-nuclear magnetic resonance (NMR). It was found that the 31P-NMR line width of AlMV Top a particles is significantly smaller than that of the larger Bottom particles. At low temperatures, the totational correlation time of the 31P nuclei essentially equals the tumbling rate of the virus particle, indicating that the RNA is contained rigidly inside the virion. At more elevated temperatures, the NMR line width sharpens more than expected on the basis of viscosity changes and the RNA exhibits internal mobility. The occurrence of internal mobility is paralleled by an increased internal mobility of the N-terminal part of the coat protein, as could be observed by 1H-NMR spectroscopy. The influence of EDTA on the 31P-NMR line width appeared to be negligible, which is in agreement with the idea that AlMV does not 'swell' like several other RNA-containing plant viruses.

Refined structure of southern bean mosaic virus at 2.9 A resolution

The T = 3 capsid of southern bean mosaic virus is analyzed in detail. The beta-sheets of the beta-barrel folding motif that form the subunits show a high degree of twist, generated by several beta-bulges. Only 34 water molecules were identified in association with the three quasi-equivalent subunits, most of them on the external viral surface. Subunit contacts related by quasi-3-fold axes are similar, are dominated by polar interactions and have almost identical calcium binding sites. There is no metal ion on the quasi-3-fold axis, as previously reported. Subunits related by quasi-2-fold and icosahedral 2-fold axes have different contacts but nevertheless display almost identical interactions between the antiparallel helices alpha A. A dipole-dipole type interaction between these helices may produce an energetically stable hinge that allows two types of dimers in a T = 3 assembly. The temperature factor distribution, the hydrogen-bonding pattern, and the contacts across the icosahedral 2-fold axes suggest that one of the dimer types is present in the intact virion and probably also in solution; the other is produced only during capsid assembly. Interactions along the 5-fold axes are mainly polar and possibly form an ion channel. The beta-sheet structures of the three subunits can be superimposed with considerable precision. Significant relative distortions between quasi-equivalent subunits occur mainly in helices and loops. The two dimeric forms and the subunit distortions are the consequence of the non-equivalent subunit environments in the capsid.

Crystallization and preliminary X-ray diffraction analysis of foot-and-mouth disease virus

Foot-and-mouth disease virus has been crystallized with the objectives of (1) determining the composition and conformation of the major immunogenic site(s) and (2) comparing its structure with those of the related polio, rhino and Mengo viruses, representing the other three genera of the picornaviruses. Most of the work has been done with virus strain O1BFS 1860, which crystallized as small rhombic dodecahedra of maximum dimension 0.3 mm. Virus recovered from crystals was infectious, and was indistinguishable from native virus both in protein composition and buoyant density. The stability of the crystals in the X-ray beam was comparable with that of other picornavirus crystals and they diffracted to a resolution of better than 2.3 A. Initial analysis of the X-ray diffraction data shows the virus to be positioned on a point of 23 symmetry in a close-packed array so that examples of all the icosahedral symmetry elements, except the 5-fold axes, are expressed crystallographically. The cell dimensions are a = b = c = 345 A, alpha = beta = gamma = 90 degrees, with a space group of I23. The diameter of the virus particle is 300 A. Despite the small size of the crystals, diffraction data have been collected to a reasonable resolution using a synchrotron source. Phasing of the diffraction data will be attempted using the methods of molecular replacement.

The nucleocapsid of the lipid-containing double-stranded RNA bacteriophage phi 6 contains a protein skeleton consisting of a single polypeptide species

The nucleocapsid of the enveloped double-stranded RNA bacteriophage phi 6 was isolated by extraction with the nonionic detergent Triton X-114 and subjected to disruption analysis with chelating and protein-denaturing agents. The subnucleocapsid particles were separated in rate-zonal sucrose gradients, and their ultrastructure and protein composition were analyzed. The role of divalent cations in the nucleocapsid structure was studied by using a precipitation assay of the isolated nucleocapsid proteins. The phi 6 nucleocapsid had a cagelike skeleton consisting of a single polypeptide species (P1). Two other proteins (P2 and P4) were associated with the P1 cage. These three early proteins were previously known to be involved in the RNA synthesis machinery of the virus. The stability of the nucleocapsid surface lattice consisting of protein P8 was dependent on Ca2+ ions.

Virion orientation in cubic crystals of the human common cold virus HRV14

A new cubic crystal form (a = 445.1 A) of space group P23 is reported for human rhinovirus R14. There are four particles per unit cell, each situated on a crystallographic 3-fold axis. The orientation of these particles has been determined with a rotation function and their approximate positions have been derived from a Patterson map. The crystals diffract to at least 2.8 A resolution. Limitations to the possible surface features of the virus are set by a comparison of the cubic and orthorhombic crystal forms.

Structure of a T = 1 aggregate of alfalfa mosaic virus coat protein seen at 4.5 A resolution

A T = 1 empty aggregate of alfalfa mosaic virus coat protein had been crystallized in a hexagonal unit cell and its orientation was determined with the rotation function. A single heavy-atom derivative has now been prepared and the position of the two Hg atoms per protein subunit were determined using a systematic Patterson search procedure, given the particle orientation. Phases, initially determined by single isomorphous replacement, were refined by six cycles of electron density averaging and solvent leveling to produce a 4.5 A resolution electron density map. The protein coat is confined between 95 and 58 A radius. The subunit boundary could be delineated easily. It has a central cavity reminiscent of the beta-barrel in other spherical plant viruses, but its topology could not be determined unambiguously. The spherical particle has large holes at the 5-fold axes, consistent with previous observations. The subunits have substantial interactions at the 2 and 3-fold axes. The structure of the elongated particles is discussed in relation to these results.