Isolation and characterization of cloned fragments of bacteriophage P1 DNA

Type III restriction-modification enzymes: a historical perspective

Restriction endonucleases interact with DNA at specific sites leading to cleavage of DNA. Bacterial DNA is protected from restriction endonuclease cleavage by modifying the DNA using a DNA methyltransferase. Based on their molecular structure, sequence recognition, cleavage position and cofactor requirements, restriction-modification (R-M) systems are classified into four groups. Type III R-M enzymes need to interact with two separate unmethylated DNA sequences in inversely repeated head-to-head orientations for efficient cleavage to occur at a defined location (25-27 bp downstream of one of the recognition sites). Like the Type I R-M enzymes, Type III R-M enzymes possess a sequence-specific ATPase activity for DNA cleavage. ATP hydrolysis is required for the long-distance communication between the sites before cleavage. Different models, based on 1D diffusion and/or 3D-DNA looping, exist to explain how the long-distance interaction between the two recognition sites takes place. Type III R-M systems are found in most sequenced bacteria. Genome sequencing of many pathogenic bacteria also shows the presence of a number of phase-variable Type III R-M systems, which play a role in virulence. A growing number of these enzymes are being subjected to biochemical and genetic studies, which, when combined with ongoing structural analyses, promise to provide details for mechanisms of DNA recognition and catalysis.

The localization and orientation of specific genes in the chloroplast chromosome of Vicia faba

The genes for six chloroplast polypeptides have been localized on the map of Vicia faba chloroplast DNA using heterologous probes. These include the three subunits (α, β, ε) of CF1 of ATP synthase, subunit III of CF0 from ATP synthase, the 32 kilodalton thylakoidal membrane protein of photosystem II and cytochrome f of the electron transport chain. The direction of transcription has been determined for the three subunits of CF1 and the 32 kilodalton thylakoidal protein. The physical map of the chloroplast DNA has also been expanded to include Sma1 sites in addition to previously mapped restriction enzyme sites. Finally, the genetic arrangement of Vicia faba chloroplast DNA was compared to other known genetic maps.

Mapping the Chloroplast DNA of Vicia faba

A complete clone bank representing the chloroplast DNA from Vicia faba has been constructed. A total of 15 fragments (10 Pst1, 1 Pst1-EcoR1 and 4 Sal1 fragments) were inserted into the vector pBR322 and transformed into the E. coli strain HB101. The cloned fragments were used as the main tools in constructing the physical map of Vicia faba for the restriction endonucleases Pst1, Kpn1 and Xho1. The identity of the cloned fragments was demonstrated by restriction analysis and blot hybridization. The information generated was used to construct the map. The 16S and 23S rRNA genes and the gene for the large subunit of ribulose-1,5-bisphosphate carboxylase have been positioned on the map using heterologous probes. The orientation of the gene for the large subunit of RuBP carboxylase has also been determined.

Mutations in coliphage p1 affecting host cell lysis

A total of 103 amber mutants of coliphage P1 were tested for lysis of nonpermissive cells. Of these, 83 caused cell lysis at the normal lysis time and have defects in particle morphogenesis. Five amber mutants, with mutations in the same gene (gene 2), caused premature lysis and may have a defect in a lysis regulator. Fifteen amber mutants were unable to cause cell lysis. Artificially lysed cells infected with five of these mutants produced viable phage particles, and phage particles were seen in thin sections of unlysed, infected cells. However, phage production by these mutants was not continued after the normal lysis time. We conclude that the defect of these five mutants is in a lysis function. The five mutations were found to be in the same gene (designated gene 17). The remaining 10 amber mutants, whose mutations were found to be in the same gene (gene 10), were also unable to cause cell lysis. They differed from those in gene 17 in that no viable phage particles were produced from artificially lysed cells, and no phage particles were seen in thin sections of unlysed, infected cells. We conclude that the gene 10 mutants cannot synthesize late proteins, and it is possible that gene 10 may code for a regulator of late gene expression for P1.

Genome of bacteriophage P1

P1 is a bacteriophage of Escherichia coli and other enteric bacteria. It lysogenizes its hosts as a circular, low-copy-number plasmid. We have determined the complete nucleotide sequences of two strains of a P1 thermoinducible mutant, P1 c1-100. The P1 genome (93,601 bp) contains at least 117 genes, of which almost two-thirds had not been sequenced previously and 49 have no homologs in other organisms. Protein-coding genes occupy 92% of the genome and are organized in 45 operons, of which four are decisive for the choice between lysis and lysogeny. Four others ensure plasmid maintenance. The majority of the remaining 37 operons are involved in lytic development. Seventeen operons are transcribed from sigma(70) promoters directly controlled by the master phage repressor C1. Late operons are transcribed from promoters recognized by the E. coli RNA polymerase holoenzyme in the presence of the Lpa protein, the product of a C1-controlled P1 gene. Three species of P1-encoded tRNAs provide differential controls of translation, and a P1-encoded DNA methyltransferase with putative bifunctionality influences transcription, replication, and DNA packaging. The genome is particularly rich in Chi recombinogenic sites. The base content and distribution in P1 DNA indicate that replication of P1 from its plasmid origin had more impact on the base compositional asymmetries of the P1 genome than replication from the lytic origin of replication.

S-adenosyl-L-methionine is required for DNA cleavage by type III restriction enzymes

The requirement of S-adenosyl-L-methionine (AdoMet) in the cleavage reaction carried out by type III restriction-modification enzymes has been investigated. We show that DNA restriction by EcoPI restriction enzyme does not take place in the absence of exogenously added AdoMet. Interestingly, the closely related EcoP15I enzyme has endogenously bound AdoMet and therefore does not require the addition of the cofactor for DNA cleavage. By employing a variety of AdoMet analogs, which differ structurally from AdoMet, this study demonstrates that the carboxyl group and any substitution at the epsilon carbon of methionine is absolutely essential for DNA cleavage. Such analogs could bring about the necessary conformational change(s) in the enzyme, which make the enzyme proficient in DNA cleavage. Our studies, which include native polyacrylamide gel electrophoresis, molecular size exclusion chromatography, UV, fluorescence and circular dichroism spectroscopy, clearly demonstrate that the holoenzyme and apoenzyme forms of EcoP15I restriction enzyme have different conformations. Furthermore, the Res and Mod subunits of the EcoP15I restriction enzyme can be separated by gel filtration chromatography in the presence of 2 M NaCl. Reconstitution experiments, which involve mixing of the isolated subunits, result in an apoenzyme form, which is restriction proficient in the presence of AdoMet. However, mixing the Res subunit with Mod subunit deficient in AdoMet binding does not result in a functional restriction enzyme. These observations are consistent with the fact that AdoMet is required for DNA cleavage. In vivo complementation of the defective mod allele with a wild-type mod allele showed that an active restriction enzyme could be formed. Furthermore, we show that while the purified c2-134 mutant restriction enzyme is unable to cleave DNA, the c2-440 mutant enzyme is able to cleave DNA albeit poorly. Taken together, these results suggest that AdoMet binding causes conformational changes in the restriction enzyme and is necessary to bring about DNA cleavage.

ATP-dependent restriction enzymes

The phenomenon of restriction and modification (R-M) was first observed in the course of studies on bacteriophages in the early 1950s. It was only in the 1960s that work of Arber and colleagues provided a molecular explanation for the host specificity. DNA restriction and modification enzymes are responsible for the host-specific barriers to interstrain and interspecies transfer of genetic information that have been observed in a variety of bacterial cell types. R-M systems comprise an endonuclease and a methyltransferase activity. They serve to protect bacterial cells against bacteriophage infection, because incoming foreign DNA is specifically cleaved by the restriction enzyme if it contains the recognition sequence of the endonuclease. The DNA is protected from cleavage by a specific methylation within the recognition sequence, which is introduced by the methyltransferase. Classic R-M systems are now divided into three types on the basis of enzyme complexity, cofactor requirements, and position of DNA cleavage, although new systems are being discovered that do not fit readily into this classification. This review concentrates on multisubunit, multifunctional ATP-dependent restriction enzymes. A growing number of these enzymes are being subjected to biochemical and genetic studies that, when combined with ongoing structural analyses, promise to provide detailed models for mechanisms of DNA recognition and catalysis. It is now clear that DNA cleavage by these enzymes involves highly unusual modes of interaction between the enzymes and their substrates. These unique features of mechanism pose exciting questions and in addition have led to the suggestion that these enzymes may have biological functions beyond that of restriction and modification. The purpose of this review is to describe the exciting developments in our understanding of how the ATP-dependent restriction enzymes recognize specific DNA sequences and cleave or modify DNA.

Accessory genes in the darA operon of bacteriophage P1 affect antirestriction function, generalized transduction, head morphogenesis, and host cell lysis

Bacteriophage P1 mutants with the 8.86-kb region between the invertible C-segment and the residential IS1 element deleted from their genome are still able to grow vegetatively and to lysogenize stably, but they show several phenotypic changes. These include the formation of minute plaques due to delayed cell lysis, the abundant production of small-headed particles, a lack of specific internal head proteins, sensitivity to type I host restriction systems, and altered properties to mediate generalized transduction. In the wild-type P1 genome, the accessory genes encoding the functions responsible for these characters are localized in the darA operon that is transcribed late during phage production. We determined the relevant DNA sequence that is located between the C-segment and the IS1 element and contains the cin gene for C-inversion and the accessory genes in the darA operon. The darA operon carries eight open reading frames that could encode polypeptides containing >100 amino acids. Genetic studies indicate that some of these open reading frames, in particular those residing in the 5' part of the darA operon, are responsible for the phenotypic traits identified. The study may contribute to a better comprehension of phage morphogenesis, of the mobilization of host DNA into phage particles mediating generalized transduction, of the defense against type I restriction systems, and of the control of host lysis.

The tripartite immunity system of phages P1 and P7

Prophages P1 and P7 exist as unit copy DNA plasmids in the bacterial cell. Maintenance of the prophage state requires the continuous expression of two repressors: (i) C1 is a protein which negatively regulates the expression of lytic genes including the C1 inactivator gene coi, and (ii) C4 is an antisense RNA which specifically inhibits the synthesis of an anti-repressor Ant. In addition, C1 repression is strengthened by lxc encoding an auxiliary repressor protein. The repressors C1, C4 and Lxc are components of a tripartite immunity system of the two phages. Here, the mode of action of these regulatory components including their antagonists Coi and Ant is described.

ATP hydrolysis is required for DNA cleavage by EcoPI restriction enzyme

The type III restriction endonuclease EcoPI, coded by bacteriophage P1, cleaves unmodified DNA in the presence of ATP and magnesium ions. We show that purified EcoPI restriction enzyme fails to cleave DNA in the presence of non-hydrolyzable ATP analogs. More importantly, this study demonstrates that EcoPI restriction enzyme has an inherent ATPase activity, and ATP hydrolysis is necessary for DNA cleavage. Furthermore, we show that the progress curve of the reaction with EcoPI restriction enzyme exhibits a lag which is dependent on the enzyme concentration. Kinetic analysis of the progress curves of the reaction suggest slow transitions that can occur during the reaction, characteristic of hysteretic enzymes. The role of ATP in the cleavage mechanism of type III restriction enzymes is discussed.

DNA inversion regions Min of plasmid p15B and Cin of bacteriophage P1: evolution of bacteriophage tail fiber genes

Plasmid p15B and the genome of bacteriophage P1 are closely related, but their site-specific DNA inversion systems, Min and Cin, respectively, do not have strict structural homology. Rather, the complex Min system represents a substitution of a Cin-like system into an ancestral p15B genome. The substituting sequences of both the min recombinase gene and the multiple invertible DNA segments of p15B are, respectively, homologous to the pin recombinase gene and to part of the invertible DNA of the Pin system on the defective viral element e14 of Escherichia coli K-12. To map the sites of this substitution, the DNA sequence of a segment adjacent to the invertible segment in the P1 genome was determined. This, together with already available sequence data, indicated that both P1 and p15B had suffered various sequence acquisitions or deletions and sequence amplifications giving rise to mosaics of partially related repeated elements. Data base searches revealed segments of homology in the DNA inversion regions of p15B, e14, and P1 and in tail fiber genes of phages Mu, T4, P2, and lambda. This result suggest that the evolution of phage tail fiber genes involves horizontal gene transfer and that the Min and Pin regions encode tail fiber genes. A functional test proved that the p15B Min region carries a tail fiber operon and suggests that the alternative expression of six different gene variants by Min inversion offers extensive host range variation.

Bacteriophage P1 gene 10 encodes a trans-activating factor required for late gene expression

Amber mutants of bacteriophage P1 were used to identify functions involved in late regulation of the P1 lytic growth cycle. A single function has been genetically identified to be involved in activation of the phage-specific late promoter sequence Ps. In vivo, P1 gene 10 amber mutants fail to trans activate a lacZ operon fusion under the transcriptional control of promoter Ps. Several P1 segments, mapping around position 95 on the P1 chromosome, were cloned into multicopy plasmid vectors. Some of the cloned DNA segments had a deleterious effect on host cells unless they were propagated in a P1 lysogenic background. By deletion and sequence analysis, the harmful effect could be delimited to a 869-bp P1 fragment, containing a 453-bp open reading frame. This open reading frame was shown to be gene 10 by sequencing the amber mutation am10.1 and by marker rescue experiments with a number of other gene 10 amber mutants. Gene 10 codes for an 18.1-kDa protein showing an unusually high density of charged amino acid residues. No significant homology to sequences present in the EMBL/GenBank data base was found, and the protein contained none of the currently known DNA-binding motifs. An in vivo trans activation assay system, consisting of gene 10 under the transcriptional control of an inducible promoter and a gene S/lacZ fusion transcribed from Ps, was used to show that gene 10 is the only phage-encoded function required for late promoter activation.

Two-step cloning and expression in Escherichia coli of the DNA restriction-modification system StyLTI of Salmonella typhimurium

The StyLTI restriction-modification system is common to most strains of the genus Salmonella, including Salmonella typhimurium. We report here the two-step cloning of the genes controlling the StyLTI system. The StyLTI methylase gene (mod) was cloned first. Then, the companion endonuclease gene (res) was introduced on a compatible vector. A strain of S. typhimurium sensitive to the coliphage lambda was constructed and used to select self-modifying recombinant phages from a Res- Mod+ S. typhimurium genomic library in the lambda EMBL4 cloning vector. The methylase gene of one of these phages was then subcloned in pBR328 and transferred into Escherichia coli. In the second step, the closely linked endonuclease and methylase genes were cloned together on a single DNA fragment inserted in pACYC184 and introduced into the Mod+ E. coli strain obtained in the first step. Attempts to transform Mod- E. coli or S. typhimurium strains with this Res+ Mod+ plasmid were unsuccessful, whereas transformation of Mod+ strains occurred at a normal frequency. This can be understood if the introduction of the StyLTI genes into naive hosts is lethal because of degradation of host DNA by restriction activity; in contrast to most restriction-modification systems, StyLTI could not be transferred into naive hosts without killing them. In addition, it was found that strains containing only the res gene are viable and lack restriction activity in the absence of the companion mod gene. This suggests that expression of the StyLTI endonuclease activity requires at least one polypeptide involved in the methylation activity, as is the case for types I and III restriction-modification systems but not for type II systems.

The ImmC region of phage P1 codes for a gene whose product promotes lytic growth

The ImmC region of the temperate bacteriophage P1 contains c1, a gene that codes for a repressor of lytic growth. Located in the region upstream of c1 are four open reading frames capable of coding for low-molecular-weight proteins. The efficiency of lysogeny by P1+Cm was found to be reduced by almost 10(5)-fold when the host cells carry this region of ImmC on a multicopy plasmid. The sequences responsible for interfering with lysogen formation were localized to one of the small open reading frames (orf4) within ImmC. Insertions and deletions within orf4 suppress the virulent phenotype of P1virC mutants when introduced into the phage by recombination. These virC-suppressed mutant phage were found to be incapable of lytic growth unless the product of orf4 is provided in trans. The presence of orf4 was observed to interfere with repression by the c1 protein of ImmC-encoded promoters fused to lacZ. For this reason, we suggest that orf4 corresponds to coi, a gene previously proposed to code for an inactivator of c1-mediated repression.

The Min DNA inversion enzyme of plasmid p15B of Escherichia coli 15T-: a new member of the Din family of site-specific recombinases

Plasmid p15B is a bacteriophage P1-related resident of Escherichia coli 15T-. Both genomes contain a segment in which DNA inversion occurs, although this part of their genomes is not identical. This DNA segment of p15B was cloned in a multicopy vector plasmid. Like its parent, the resulting plasmid, pAW800, undergoes complex multiple DNA inversions: this DNA inversion system is therefore called Min. The min gene, which codes for the p15B Min DNA invertase, can complement the P1 cin recombinase gene. The Min inversion system is thus a new member of the Din family of site-specific recombinases to which Cin belongs. The DNA sequence of the min gene revealed that Min is most closely related to the Pin recombinase of the e14 defective viral element on the E. coli K12 chromosome. Like other members of the Din family, the min gene contains a recombinational enhancer element which stimulates site-specific DNA inversion 300-fold.

Organization of the immunity region immI of bacteriophage P1 and synthesis of the P1 antirepressor

The immI region of bacteriophage P1 includes the ant/reb gene, which encodes the antirepressor protein, and the c4 gene, which encodes a repressor molecule that negatively regulates antirepressor synthesis. The antirepressor interferes with the activity of the P1 repressor of lytic function, the product of the c1 gene. We have determined the DNA sequences of the immI region of P1 wild-type and the mutants virs, ant16, ant17, and reb22. Using suitable P1 immI DNA subfragments cloned into a vector of the T7 bacteriophage RNA polymerase expression system the antirepressor protein(s) was overproduced. On the basis of positions of immI mutations and the sizes of ant gene products, the following organizational feature of the P1 immI region is suggested: (1) the genes c4 and ant are cotranscribed in that order from the same promoter in the clockwise direction of the P1 genetic map; (2) an open reading frame for an unknown gene is located in between c4 and ant; (3) the site at which the c4 repressor acts is located within the c4 structural gene; (4) two antirepressor proteins of molecular weights 42,000 and 32,000 are encoded by a single open reading frame, with the smaller protein initiating at an in-frame start codon; (5) transcription of immI is regulated via a c1-controlled operator, Op51, indicating a communication between the immunity systems immC and immI.

Characterization of mutations of the bacteriophage P1 mod gene encoding the recognition subunit of the EcoP1 restriction and modification system

This study characterized several mutations of the bacteriophage P1 mod gene. This gene codes for the subunit of the EcoP1 restriction enzyme that is responsible for DNA sequence recognition and for modification methylation. We cloned the mutant mod genes into expression vectors and purified the mutant proteins to near homogeneity. Two of the mutant mod genes studied were the c2 clear-plaque mutants described by Scott (Virology 41:66-71, 1970). These mutant proteins can recognize EcoP1 sites in DNA and direct restriction but are unable to modify DNA. Methylation assays as well as S-adenosylmethionine (SAM) binding studies showed that the c2 mutants are methylation deficient because they do not bind SAM, and we conclude that the mutations destroy the SAM-binding site. Both of the c2 mutations lie within a region of the EcoP1 mod gene that is not conserved when compared with the mod gene of the related EcoP15 system. EcoP15 and EcoP1 recognize different DNA sequences, and we believe that this region of the protein may code for the DNA-binding site of the enzyme. The other mutants characterized were made by site-directed mutagenesis at codon 240. Evidence is presented that one of them, Ser-240----Pro, simultaneously lost the capacity to bind SAM and may also have changed its DNA sequence specificity.

Use of a biotinylated DNA probe to detect bacteria transduced by bacteriophage P1 in soil

Presumptive bacteriophage P1 transductants of Escherichia coli, isolated from soil inoculated with lysates of transducing phage P1 and E. coli, were confirmed to be lysogenic for phage P1 by hybridization with a biotinylated DNA probe prepared from the 1.2-kilobase-pair HindIII 3 fragment of bacteriophage P1. No P1 lysogens of indigenous soil bacteria were detected with the DNA probe. The sensitivity and specificity of the DNA probe were assessed with purified and dot blot DNA, respectively. In addition, two techniques for the lysis and deproteinization of bacteria and bacteriophages on nitrocellulose filters were compared. These studies indicated that biotinylated DNA probes may be an effective alternative to conventional radiolabeled DNA probes for detecting specific gene sequences in bacteria indigenous to or introduced into soil.

Type III DNA restriction and modification systems EcoP1 and EcoP15. Nucleotide sequence of the EcoP1 operon, the EcoP15 mod gene and some EcoP1 mod mutants

This paper presents the nucleotide sequence of the mod-res operon of phage P1, which encodes the two structural genes for the EcoP1 type III restriction and modification system. We have also sequenced the mod gene of the allelic EcoP15 system. The mod gene product is responsible for binding the system-specific DNA recognition sequences in both restriction and modification; it also catalyses the modification reaction. A comparison of the two mod gene product sequences shows that they have conserved amino and carboxyl ends but have completely different sequences in the middle of the molecules. Two alleles of the EcoP1 mod gene that are defective in modification but not in restriction were also sequenced. The mutations in both alleles lie within the non-conserved regions.

Multiple repressor binding sites in the genome of bacteriophage P1

After digestion of bacteriophage P1 DNA with EcoRI in the presence of P1 repressor, 6 repressor binding sites were identified in 5 of 26 EcoRI fragments. Binding sites were localized by the decreased mobility of DNA fragment-repressor complexes during electrophoresis and by DNase protection ("footprinting") analysis. The repressor binding sites, or operators, comprise a 17-base-pair-long consensus sequence lacking symmetrical elements. Three operators can be related to known genes, whereas the function of the others is still unknown. The mutant P1 bac, rendering ban expression constitutive, is identified as an operator-constitutive mutation of the ban operon.

Expression and proteolytic processing of the darA antirestriction gene product of bacteriophage P1

The darA gene coding for one of the two bacteriophage P1 antirestriction functions is expressed late after infection or induction. The protein is made as a high-molecular-weight soluble precursor. This is proteolytically cleaved to the mature form, which is a structural component of the phage head. Defective mutants of the phage have been found in which the synthesis of gpdarA is normal but processing does not take place. These mutations all map to the same region of the P1 genome and we propose that they lie in the structural gene for the processing protease.

High level expression of the EcoP1 modification methylase gene and characterisation of the gene product

We have cloned the gene coding for the EcoP1 modification methylase in an expression system based on the phage lambda pL promoter and the cI857-coded thermoinducible repressor. We have used this system to purify the enzyme on the 20-30-mg scale and have examined some of its enzymatic properties. The enzyme is a tetramer of Mr 72,000 subunits and is approx. 40% alpha-helical. Experiments with the methyl donor, S-adenosyl methionine, radioactively labelled in different positions indicate that a methyl group is transferred to the enzyme during the reaction in what is most likely a covalent bond.

Visualization of RNA polymerase bound to R-loop molecules improves electron microscopic analysis of in vitro transcription

An electron microscope method is described which allows improved analysis of in vitro transcription. Transcription complexes are fixed with glutaraldehyde, subjected to R-loop conditions which allow the nascent RNA chains to hybridize to the DNA templates, and mounted for electron microscopy by a protein-free preparation method. An RNA polymerase molecule (or parts of it) associated with only one end of the R-loop identifies the polarity of the transcript, thus determining the origin and direction of transcription. The method was evaluated using known in vitro promoters on the bacteriophage P1 genome and was used for mapping of additional promoters in their vicinity.

A phage P1 function that stimulates homologous recombination of the Escherichia coli chromosome

Recombination between two different defective lacZ genes in the Escherichia coli chromosome (lac- X lac- recombination) was stimulated 2- to 8-fold by prophage P1, depending on the nature of the phage c1 repressor. The P1 BamHI restriction fragment B8 in a lambda-P1:B8 hybrid phage, stimulated lac- X lac- recombination 90-fold in the absence of P1 repressor. A gene necessary for recombination enhancement, designated ref, was localized to one end of B8. Ref expression from lambda-P1:B8 was repressed in trans by a P1 c+ prophage. Two P1 regulatory mutations, bof and lxc, derepressed prophage expression of ref and depressed a prophage function that complemented an E. coli mutant (ssb) deficient in the single-stranded DNA binding protein. Ref stimulation was dependent on preexisting E. coli recombination functions (RecA-RecBC and RecA-RecF). However, other (phage and plasmid) recombination processes involving these functions were not stimulated. ref::Tn5 phages plated and formed lysogens normally. Thus ref appears to be an integral, but not essential, phage gene that stimulates recombination of the host chromosome specifically.

The localization of genes for ribosomal, cytochrome b6/f complex and photosystems I and II polypeptides on the chloroplast chromosome of Vicia faba

Detailed studies of rearranged chloroplast genomes such as Vicia faba should give insights into the constraints governing the positional organization of the various gene clusters on the chloroplast chromosome. Seven polypeptide genes have already been mapped on the Vicia faba chloroplast genome (21, 22). In this report, ten additional chloroplast DNA-coded polypeptide genes have been mapped by heterologous hybridization. These genes include cytochrome b6 and subunit 4 of the cytochrome b6/f complex, the two P700 chlorophyll a apoproteins of photosystem I, the two chlorophyll a-binding proteins of photosystem II, cytochrome b559, the D2 polypeptide and two ribosomal proteins. The direction of transcription for five of these gene sequences has been established by utilizing 5' and 3' end specific gene probes. The genetic organization of the Vicia faba chloroplast genome was compared with the chloroplast maps of the standard conserved genome of spinach and the more rearranged genome of pea.

Correlation of the genetic and physical maps of phage T1

A series of BglII- and Sau3A-derived fragments of phage T1 DNA were cloned into the plasmid vector pLV59 and the clones were tested for their ability to complement and recombine with infecting genomes of am mutants representing all known T1 essential genes. The resulting data were used to correlate the T1 genetic and physical maps. This analysis led to the following conclusions: the large map distances observed at the left (early) end of the genetic map arise partly from increased genetic recombination at the chromosomal left end and partly from increased physical distances between identified genetic markers in this region, the right chromosomal end is also recombinogenic, genes 3.5 to 18, which occupy the right two-thirds of the DNA molecule, are tightly compacted with little space for additional protein-specifying sequences in this region.

Expression of the bacteriophage P1 cin recombinase gene from its own and heterologous promoters

The cin recombinase of bacteriophage P1, a protein that catalyses site-specific DNA inversions, has been identified and its structural gene has been cloned under the control of different promoters. One of the DNA sequences used for the site-specific recombination, cixL, overlaps with the 3' end of the gene, but we show that the presence of this site does not affect cin gene expression from strong promoters. To assay cin activity we have constructed plasmids that carry antibiotic resistance genes within the invertible segment that are transcribed from promoters outside the segment. DNA inversion switches on or off genes for chloramphenicol or kanamycin resistance. These tester plasmids are used to study cin-mediated DNA inversion both in vivo and in vitro.

Location by DNA sequence analysis of cop mutations affecting the number of plasmid copies of prophage P1

The DNA sequence of six P1 cop mutants, which are altered in the control of copy number of the plasmid prophage, was compared to that of P1 wild type. Each cop mutant differs from the wild type by a single base substitution. All of these substitutions are located within a 400 base pair region of P1 DNA that also encodes rep, a gene whose product is required for P1 replication.

Shuttle cloning vectors for the cyanobacterium Anacystis nidulans

Hybrid plasmids capable of acting as shuttle cloning vectors in Escherichia coli and the cyanobacterium Anacystis nidulans R2 were constructed by in vitro ligation. DNA from the small endogenous plasmid of A. nidulans was combined with two E. coli vectors, pBR325 and pDPL13, to create vectors containing either two selectable antibiotic resistance markers or a single marker linked to a flexible multisite polylinker. Nonessential DNA was deleted from the polylinker containing plasmid pPLAN B2 to produce a small shuttle vector carrying part of the polylinker (pCB4). The two polylinker-containing shuttle vectors, pPLAN B2 and pCB4, transform both E. coli and A. nidulans efficiently and provide seven and five unique restriction enzyme sites, respectively, for the insertion of a variety of DNA fragments. The hybrid plasmid derived from pBR325 (pECAN1) also transforms both E. coli and A. nidulans, although at a lower frequency, and contains two unique restriction enzyme sites.

SOS induction by P1 Km miniplasmids

We have constructed (in vitro) a set of P1 miniplasmids. The smallest of these that could function as an independent replicon contained the right side of EcoRI-5 plus all of EcoRI-8. Those miniplasmids that lack EcoRI-6 induce the SOS pathway of the cell as shown by (i) increased expression of the recA operon, (ii) excision of the cryptic genetic element e14, (iii) spontaneous induction of lambda, and (iv) dependence of e14 excision on recA+ function. This induction was contingent upon the replication of the P1 Km miniplasmids from their P1 origin and, thus, was apparently caused by an aberrant initiation of DNA replication. When P1 EcoRI-6 was present in cis or trans with a P1 Km miniplasmid, neither e14 nor lambda was excised, but the expression of the recA operon was still induced. These results suggest that P1 EcoRI fragments 5 and 8 are insufficient for normal replication, and thus our P1 Km miniplasmids induced SOS functions. A product of EcoRI-6 may partially restore normal replication.

Physical analysis of the genomes of hybrid phages between phage P1 and plasmid p15B

The genomes of three plaque-forming recombinant phages between phage P1 and plasmid p15B were characterized by restriction cleavage analysis and electron microscopic heteroduplex studies. The structure of all three P1-15 hybrid genomes differs from that of P1 DNA in the res mod region coding for restriction and modification systems EcoP15 and EcoP1, respectively. P1-15 hybrid 2 shows an additional major difference to P1 around the site of the residential IS1 element of P1 and it does not carry an IS1 in its genome.

DNA restriction--modification genes of phage P1 and plasmid p15B. Structure and in vitro transcription

The EcoP1 and EcoP15 DNA restriction-modification systems are coded by the related P1 prophage and p15B plasmid. We have examined the organization of the genes for these systems using P1 itself, "P1-P15" hybrid phages expressing the EcoP15 restriction specificity of p15B and cloned restriction fragments derived from these phage DNAs. The results of transposon mutagenesis, restriction cleavage analysis. DNA heteroduplex analysis and in vitro transcription mapping allow the following conclusions to be drawn concerning the structural genes. (1) All of the genetic information necessary to specify either system is contained within a contiguous DNA segment of 5 x 10(3) bases which encodes two genes. One of them, necessary for both restriction and modification, we call mod and the other, required only for restriction (together with mod), we call res. (2) The res gene is about 2.8 x 10(3) bases long and at the heteroduplex level is largely identical for P1 and P15: it shows a small region of partial nonhomology and some restriction cleavage site differences. The mod gene is about 2.2 x 10(3) bases long and contains a 1.2 x 10(3) base long region of non-homology between P1 and P15 toward the N-terminus of the gene. The rest of the gene at this level of analysis is identical for the two systems. (3) Each of the genes is transcribed in vitro from its own promoter. It is possible that the res gene is also transcribed by readthrough from the mod promoter.

DNA restriction--modification enzymes of phage P1 and plasmid p15B. Subunit functions and structural homologies

We have purified the type III restriction enzymes EcoP1 and EcoP15 to homogeneity from bacteria that contain the structural genes for the enzymes cloned on small, multicopy plasmids and which overproduce the enzymes. Both of the enzymes contain two different subunits. The molecular weights of the subunits are the same for both enzymes and antibodies prepared against one enzyme cross-react with both subunits of the other. Bacteria containing a plasmid derivative in which a large part of one of the structural genes has been deleted have a restriction- modification+ phenotype and contain only the smaller of the two subunits. This subunit therefore must be the one that both recognizes the specific DNA sequence and methylates it in the modification reaction (the restriction enzyme itself also acts as a modification methylase). We have purified the P1 and P15 modification subunits from these deletion derivatives and have shown that in vitro they have the expected properties: they are sequence-specific modification methylases. In addition, we have demonstrated that strains carrying the full restriction/modification system also contain a pool of free modification subunits that might be responsible for in vivo modification.

Coliphage P1 morphogenesis: analysis of mutants by electron microscopy

We used electron microscopy and serum blocking power tests to determine the phenotypes of 47 phage P1 amber mutants that have defects in particle morphogenesis. Eleven mutants showed head defects, 30 showed tail defects, and 6 had a defect in particle maturation (which could be either in the head or in the tail). Consideration of previous complementation test results, genetic and physical positions of the mutations, and phenotypes of the mutants allowed assignment of most of the 47 mutations to genes. Thus, a minimum of 12 tail genes, 4 head genes, and 1 particle maturation gene are now known for P1. Of the 12 tail genes, 1 (gene 19, located within the invertible C loop) codes for tail fibers, 6 (genes 3, 5, 16, 20, 21, and 26) code for baseplate components (although one of these genes could code for the tail tube), 1 (gene 22) codes for the sheath, 1 (gene 6) affects tail length, 2 (genes 7 and 25) are involved in tail stability, and 1 (gene 24) either codes for a baseplate component or is involved in tail stability. Of the four head genes, gene 9 codes for a protein required for DNA packaging. The function of head gene 4 is unclear. Head gene 8 probably codes for a minor head protein, whereas head gene 23 could code for either a minor head protein or the major head protein. Excluding the particle maturation gene (gene 1), the 12 tail genes are clustered in three regions of the P1 physical genome. The four head genes are at four separate locations. However, some P1 head genes have not yet been detected and could be located in two regions (for which there are no known genes) adjacent to genes 4 and 8. The P1 morphogenetic gene clusters are interrupted by many genes that are expressed in the prophage.

Genome fusion mediated by the site specific DNA inversion system of bacteriophage P1

The genome of bacteriophage P1 contains a segment which is invertible by site specific recombination between sequences near the outside ends of the inverted repeats which flank it. Immediately adjacent to this C segment is the coding sequence for cin, the enzyme catalyzing inversion. We show that multicopy plasmids carrying cin and the sequences at which it acts (cix) can form dimers in the absence of the host recA function. Further, such plasmids can be cotransduced with P1 markers at high frequency from recA lysogens, indicating cointegration with the P1 genome. It is thus demonstrated that a system whose primary role is the inversion of a specific DNA segment can also mediate intermolecular recombination.

Isolation and characterization of P1 minireplicons, lambda-P1:5R and lambda-P1:5L

We have isolated two new classes of P1 miniplasmids, called lambda-P1:5R and lambda-P1:5L, by the in vivo extension of a cloned P1 fragment, EcoRI-5, which by itself is not capable of plasmid replication. The lambda-P1:5R plasmids contain EcoRI-5 plus a variable portion of the adjacent P1 EcoRI fragment 8. They have a copy number like that of P1 (about 1 per host chromosome), are faithfully segregated at cell division, and are subject to incompatibility exerted by either a single copy of P1 or a single copy of EcoRI-5. In contrast, the lambda-P1:5L plasmids contain EcoRI-5 and a portion of adjacent P1 DNA that includes at least P1 EcoRI fragments 15, 18, and 23 and a part of fragment 17. These plasmids have a copy number of about 15 per cell chromosome. Despite this they are segregated to daughter cells somewhat less faithfully than are lambda-P1:5R plasmids. They are sensitive to incompatibility exerted by a single copy of P1, but not to incompatibility exerted by a single copy of EcoRI-5. lambda-P1:5L plasmids are, however, sensitive to incompatibility exerted by multiple copies of EcoRI-5. These results show that the relative copy numbers of exerting and responding elements are important for the incompatibility phenotype and strongly suggest that lambda-P1:5L plasmids lack a repressor of replication that can be supplied in trans from P1 but not from EcoRI fragment 5. We suggest that P1 normally uses the 5R replicon and that the 5L replicon may be a backup system that ensures plasmid maintenance should the primary replication event fail to initiate.