Photoracemization of Ru (Bipyridine)32+

Chiral Photocatalyst Structures in Asymmetric Photochemical Synthesis

Asymmetric catalysis is a major theme of research in contemporary synthetic organic chemistry. The discovery of general strategies for highly enantioselective photochemical reactions, however, has been a relatively recent development, and the variety of photoreactions that can be conducted in a stereocontrolled manner is consequently somewhat limited. Asymmetric photocatalysis is complicated by the short lifetimes and high reactivities characteristic of photogenerated reactive intermediates; the design of catalyst architectures that can provide effective enantiodifferentiating environments for these intermediates while minimizing the participation of uncontrolled racemic background processes has proven to be a key challenge for progress in this field. This review provides a summary of the chiral catalyst structures that have been studied for solution-phase asymmetric photochemistry, including chiral organic sensitizers, inorganic chromophores, and soluble macromolecules. While some of these photocatalysts are derived from privileged catalyst structures that are effective for both ground-state and photochemical transformations, others are structural designs unique to photocatalysis and offer insight into the logic required for highly effective stereocontrolled photocatalysis.

H/D solvent isotope effects on the photoracemization reaction of enantiomeric the tris(2,2′-bipyridine)ruthenium(ii) complex and its analogues

This work assessed solvent isotope effects on the photoracemization rate and emission lifetime for [Ru(bpy)₃]²⁺ (bpy = 2,2′-bipyridine) in water.

A Key Factor Dominating the Competition between Photolysis and Photoracemization of [Ru(bipy)3]2+ and [Ru(phen)3]2+ Complexes

Photolysis and photoracemization are two important photochemical phenomena of the prototype complexes [Ru(bipy)₃]²⁺ and [Ru(phen)₃]²⁺ (bipy = 2,2'-bipyridine, phen = 1,10-phenanthroline), but little is known about their relations. To solve this issue, the photoinduced chiral inversion Δ⇌Λ of the complexes was analyzed theoretically. The results indicated that the photoracemization reaction proceeds on the lowest triplet potential energy surface in three steps ³CT_Δ↔³MC_Δ, ³MC_Δ↔³MC_Λ, and ³MC_Λ↔³CT_Λ (CT = charge transfer state; MC = metal-centered state). Where the first and third steps are fast processes of picoseconds, the second is the rate-determining step (RDS) of microseconds. Such a slow step for the racemization leads to the excited molecule lingering around the bottom of ³MC state after the first step and, therefore, greatly enhances the possibility of deexcitation and photolysis mostly at the triplet-singlet crossing point. In other words, the photoracemization and photolysis of the complexes have a competition relation, not a slave relation as assumed by the photoracemization model suggested in literature. They are dominated by the RDS. This conclusion is also consistent with the Δ(δ S)⇌Λ(δ S) chiral inversion of the [Ru(bipy)₂(L-ser)]⁺ series complexes, which is reversible with no detectable photolysis, as its second step is a fast one. Note that, although the photoracemization of the prototype complexes is very slow, it passes through the three steps reversibly and ends with a photon emitting, which could be detected with the time-resolved circularly polarized luminescence and related techniques. These findings are helpful to understand and control the photochemical behavior of the complexes in practice.

Unusual Role of Excited State Mixing in the Enhancement of Photoinduced Ligand Exchange in Ru(II) Complexes

Four Ru(II) complexes were prepared bearing two new tetradentate ligands, cyTPA and 1-isocyTPQA, which feature a piperidine ring that provides a structurally rigid backbone and facilitates the installation of other donors as the fourth chelating arm, while avoiding the formation of stereoisomers. The photophysical properties and photochemistry of [Ru(cyTPA)(CH3CN)2]2+ (1), [Ru(1-isocyTPQA)(CH3CN)2]2+ (2), [Ru(cyTPA)(py)2]2+ (3), and [Ru(1-isocyTPQA)(py)2]2+ (4) were compared. The quantum yield for the CH3CN/H2O ligand exchange of 2 was measured to be Φ400 = 0.033(3), 5-fold greater than that of 1, Φ400 = 0.0066(3). The quantum yields for the py/H2O ligand exchange of 3 and 4 were lower, 0.0012(1) and 0.0013(1), respectively. DFT and related calculations show the presence of a highly mixed 3MLCT/3ππ* excited state as the lowest triplet state in 2, whereas the lowest energy triplet states in 1, 3, and 4 were calculated to be 3LF in nature. The mixed 3MLCT/3ππ* excited state places significant spin density on the quinoline moiety of the 1-isocyTPQA ligand positioned trans to the photolabile CH3CN ligand in 2, suggesting the presence of a trans-type influence in the excited state that enhances ligand exchange. Ultrafast spectroscopy was used to probe the excited states of 1-4, which confirmed that the mixed 3MLCT/3ππ* excited state in 2 promotes ligand dissociation, representing a new manner to effect photoinduced ligand exchange. The findings from this work can be used to design improved complexes for applications that require efficient ligand dissociation, as well as for those that require minimal deactivation of the 3MLCT state through low-lying metal-centered states.

Photoisomerization of ruthenium(ii) aquo complexes: mechanistic insights and application development

The perspective article highlights a new strategic synthesis of dinuclear ruthenium(ii) complexes acting as active water oxidation catalysts and also reports the development of unique visible-light-responsive giant vesicles, both of which are achieved based on photoisomerization.

New Series of Dinuclear Ruthenium(II) Complexes Synthesized Using Photoisomerization for Efficient Water Oxidation Catalysis

A new series of proximal,proximal-[Ru2(tpy)2(L)XY](n+) (p,p-Ru2XY, tpy = 2,2':6',2″-terpyridine, L = 5-phenyl-2,8-di(2-pyridyl)-1,9,10-anthyridine, X and Y = other coordination sites) were synthesized using photoisomerization of a mononuclear complex. The p,p-Ru2XY complexes undergo unusual reversible bridge-exchange reactions to generate p,p-Ru2(μ-Cl), p,p-Ru2(μ-OH), and p,p-Ru2(OH)(OH2) with μ-Cl, μ-OH, as well as hydroxo and aquo ligands at X and Y sites of p,p-Ru2XY, respectively. The geometric and electronic structures of these complexes were characterized based on UV-vis and (1)H NMR spectra, X-ray crystallography, and density functional theory (DFT) calculations. (1)H NMR data showed C2 symmetry of p,p-Ru2(OH)(OH2) with the distorted L chelate and nonequivalence of two tpy ligands, in contrast to the C2v symmetry of p,p-Ru2(μ-Cl) and p,p-Ru2(μ-OH). However, irrespective of the lower symmetry, p,p-Ru2(OH)(OH2) is predominantly formed in neutral and weakly basic conditions due to the specially stabilized core structure by multiple hydrogen-bond interactions among aquo, hydroxo, and backbone L ligands. The electrochemical data suggested that p,p-Ru2(OH)(OH2) (Ru(II)-OH:Ru(II)-OH2) is oxidized to the Ru(III)-OH:Ru(III)-OH state at 0.64 V vs saturated calomel electrode (SCE) and further to Ru(IV)═O:Ru(IV)-OH at 0.79 V by successive 1-proton-coupled 2-electron processes at pH 7.0. The cyclic voltammogram data exhibited that the p,p-Ru2(OH)(OH2) complex works more efficiently for electrocatalytic water oxidation, compared with a similar mononuclear complex distal-[Ru(tpy)(L)OH2](2+) (d-RuOH2) and p,p-Ru2(μ-Cl) and p,p-Ru2(μ-OH), showing that the p,p-Ru2 core structure with aquo and hydroxo ligands is important for efficient electrocatalytic water oxidation. Bulk electrolysis of the p,p-Ru2(OH)(OH2) solution corroborated the electrocatalytic cycle involving the Ru(III)-OH:Ru(III)-OH state species as a resting state. The mechanistic insight into O-O bond formation for O2 production was provided by the isotope effect on electrocatalytic water oxidation by p,p-Ru2(OH)(OH2) and d-RuOH2 in H2O and D2O media.

Proline as chiral auxiliary for the economical asymmetric synthesis of ruthenium(II) polypyridyl complexes

A straightforward method for the synthesis of virtually enantiomerically pure ruthenium(II) polypyridyl complexes [Ru(pp)(pp')(pp")](PF(6))(2), pp = bidentate polypyridyl has been developed. The synthesis draws from the readily available racemic starting material cis-[Ru(pp)(pp')Cl(2)] and the natural amino acids l- or d-proline and relies on a dynamic asymmetric transformation under thermodynamic control.

Stoichiometric photoisomerization of mononuclear ruthenium(II) monoaquo complexes controlling redox properties and water oxidation catalysis

Although various reactions involved in photoexcited states of polypyridyl ruthenium(II) complexes have been extensively studied, photoisomerization of the complexes is very rare. We report the first illustration of stoichiometric photoisomerization of trans-[Ru(tpy)(pynp)OH(2)](2+) (1a) [tpy = 2,2':6',2''-terpyridine; pynp = 2-(2-pyridyl)-1,8-naphthyridine] to cis-[Ru(tpy)(pynp)OH(2)](2+) (1a') and the isolation of 1a and 1a' for X-ray crystallographic analysis. Polypyridyl ruthenium(II) aquo complexes are attracting much attention related to proton-coupled electron transfer and water oxidation catalysis. We demonstrate that the photoisomerization significantly controls the redox reactions and water oxidation catalyses involving the ruthenium(II) aquo complexes 1a and 1a'.

On the factors influencing the performance of solar reactors for water disinfection with photosensitized singlet oxygen

Two solar reactors based on compound parabolic collectors (CPCs) were optimized for water disinfection by photosensitized singlet oxygen (1O2) production in the heterogeneous phase. Sensitizing materials containing Ru(II) complexes immobilized on porous silicone were produced, photochemically characterized, and successfully tested for the inactivation of up to 10(4) CFU mL(-1) of waterborne Escherichia coli (gram-negative) or Enterococcus faecalis (gram-positive) bacteria. The main factors determining the performance of the solar reactors are the type of photosensitizing material, the sensitizer loading, the CPC collector geometry (fin- vs coaxial-type), the fluid rheology, and the balance between concurrent photothermal--photolytic and 1O2 effects on the microorganisms' inactivation. In this way, at the 40 degrees N latitude of Spain, water can be disinfected on a sunny day (0.6-0.8 MJ m(-2) L(-1) accumulated solar radiation dose in the 360-700 nm range, typically 5-6 h of sunlight) with a fin-type reactor containing 0.6 m2 of photosensitizing material saturated with tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) (ca. 2.0 g m(-2)). The optimum rheological conditions require laminar-to-transitional water flow in both prototypes. The fin-type system showed better inactivation efficiency than the coaxial reactor due to a more important photolytic contribution. The durability of the sensitizing materials was tested and the operational lifetime of the photocatalyst is at least three months without any reduction in the bacteria inactivation efficiency. Solar water disinfection with 1O2-generating films is demonstrated to be an effective technique for use in isolated regions of developing countries with high yearly average sunshine.

Synthesis, Characterization, and Photochemical and Computational Investigations of Ru(II) Heterocyclic Complexes Containing 2,6-dimethylphenylisocyanide (CNx) Ligand

The isocyanide ligand forms complexes with ruthenium(II) bis-bipyridine of the type [Ru(bpy)(2)(CNx)Cl](CF(3)SO(3)) (1), [Ru(bpy)(2)(CNx)(py)](PF(6))(2) (2), and [Ru(bpy)(2)(CNx)(2)](PF(6))(2) (3) (bpy = 2,2'-bipyridine, py = pyridine, and CNx = 2,6-dimethylphenylisocyanide). The redox potentials shift positively as the number of CNx ligands increases. The metal-to-ligand charge-transfer (MLCT) bands of the complexes are located at higher energy than 450 nm and blue shift in proportion to the number of CNx ligands. The complexes are not emissive at room temperature but exhibit intense structured emission bands at 77 K with emission lifetimes as high as 25 micros. Geometry optimization of the complexes in the singlet ground and lowest-lying triplet states performed using density functional theory (DFT) provides information about the orbital heritage and correlates with X-ray and electrochemical results. The lowest-lying triplet-state energies correlate well with the 77 K emission energies for the three complexes. Singlet excited states calculated in ethanol using time-dependent density functional theory (TDDFT) and the conductor-like polarizable continuum model (CPCM) provide information that correlates favorably with the experimental absorption spectra in ethanol.

Octahedral Fe(II) and Ru(II) complexes based on a new bis 1,10-phenanthroline ligand that imposes a well defined axis

A bis-chelating ligand (L1), made of two 7-(p-anisyl)-1,10-phenanthroline (phen) subunits connected with a p-(CH(2))(2)C(6)H(4)(CH(2))(2) spacer through their 4 positions, has been prepared, using Skraup syntheses and reaction of the anion of 4-methyl-7-anisyl-1,10-phenanthroline with alpha,alpha'-dibromo-p-xylene. Its Fe(II) complex, [FeL1(dmbp)](PF(6))(2), was prepared in one step by reaction of L1 with [Fe(dmbp)(3)](PF(6))(2) (dmbp = 4,4'-dimethyl-2,2'-bipyridine). On the other hand, its Ru(II) complex, [RuL1(dmbp)](PF(6))(2), was prepared in two steps from Ru(CH(3)CN)(4)Cl(2) and L1, followed by reaction with dmbp. X-ray crystal structure analyses show that in the two octahedral complexes, ligand L1 coils around the metal by coordination of the axial and two equatorial positions. It defines a 21 A long axis (O.O distance) running through the central metal and the terminal anisyl substituents. The complexes were also characterized by (1)H NMR, mass spectrometry, cyclic voltammetry, electronic absorption, and, in the case of Ru(II), fluorescence spectroscopy.

Molecular Architecture of Polynuclear Ruthenium Bipyridyl Complexes with Controlled Metal Helicity

The synthesis of di- and trinuclear ruthenium(II) complexes is reported, where each metal center has a tris(bidentate) octahedral coordination sphere with predetermined stereochemistry. New members of the "Chiragen" ligand series, consisting of two linked chiral 4,5-pineno-2,2'-bipyridine groups, have been prepared, with small spacer units between the coordination centers (-(CH(2))(n)() {n = 0, 3} and -CH(2)(bpy)CH(2)-). X-ray structural data were obtained for the ligand Chiragen[3]. (Crystal data: orthorhombic, space group P2(1)2(1)2(1), a = 12.229(1) Å, b = 12.790(1) Å, c = 20.215(1) Å, V = 3161.8(4) Å(3), Z = 4.) Combination of the ligands with Ru(bpy)(2)Cl(2) (where bpy is 2,2'-bipyridine) led to a mixture of diastereomers, while the use of enantiomerically pure Delta- or Lambda-[Ru(bpy)(2)(py)(2)](dibenzoyltartrate) or Delta-Ru(CG[m-xyl])Cl(2) led to almost complete stereoselectivity in the products. Circular dichroism spectra show that the complexes are composed of one helical diastereomer, with the expected absolute configuration predetermined by the chiral building block used. Additionally, (1)H-NMR spectroscopy indicates C(2) point group symmetry for the structures in solution, confirming the absence of DeltaLambda diastereomers.

Effect of Delocalization and Rigidity in the Acceptor Ligand on MLCT Excited-State Decay

In its most simple form, the energy gap law for excited-state nonradiative decay predicts a linear dependence of ln k(nr) on the ground- to excited-state energy gap, where k(nr) is the rate constant for nonradiative decay. At this level of approximation, the energy gap law has been successfully applied to nonradiative decay in a wide array of MLCT excited states of polypyridyl complexes of Re(I), Ru(II), and Os(II). This relationship also predicts a dependence of k(nr) on the structural characteristics of the acceptor ligand. We report here a brief survey of the literature which suggests that such effects exist and have their origin in the extent of delocalization of the excited electron in the ligand pi framework and on acceptor ligand rigidity.