Linker insertion mutagenesis as probe of structure-function relationships

Structure-function study of mammalian Munc18-1 and C. elegans UNC-18 implicates domain 3b in the regulation of exocytosis

Munc18-1 is an essential synaptic protein functioning during multiple stages of the exocytotic process including vesicle recruitment, docking and fusion. These functions require a number of distinct syntaxin-dependent interactions; however, Munc18-1 also regulates vesicle fusion via syntaxin-independent interactions with other exocytotic proteins. Although the structural regions of the Munc18-1 protein involved in closed-conformation syntaxin binding have been thoroughly examined, regions of the protein involved in other interactions are poorly characterised. To investigate this we performed a random transposon mutagenesis, identifying domain 3b of Munc18-1 as a functionally important region of the protein. Transposon insertion in an exposed loop within this domain specifically disrupted Mint1 binding despite leaving affinity for closed conformation syntaxin and binding to the SNARE complex unaffected. The insertion mutation significantly reduced total amounts of exocytosis as measured by carbon fiber amperometry in chromaffin cells. Introduction of the equivalent mutation in UNC-18 in Caenorhabditis elegans also reduced neurotransmitter release as assessed by aldicarb sensitivity. Correlation between the two experimental methods for recording changes in the number of exocytotic events was verified using a previously identified gain of function Munc18-1 mutation E466K (increased exocytosis in chromaffin cells and aldicarb hypersensitivity of C. elegans). These data implicate a novel role for an exposed loop in domain 3b of Munc18-1 in transducing regulation of vesicle fusion independent of closed-conformation syntaxin binding.

The mutation T477A in HIV-1 reverse transcriptase (RT) restores normal proteolytic processing of RT in virus with Gag-Pol mutated in the p51-RNH cleavage site

Background

The p51 subunit of the HIV-1 reverse transcriptase (RT) p66/p51 heterodimer arises from proteolytic cleavage of the RT p66 subunit C-terminal ribonuclease H (RNH) domain during virus maturation. Our previous work showed that mutations in the RT p51↓RNH cleavage site resulted in virus with defects in proteolytic processing of RT and significantly attenuated infectivity. In some cases, virus fitness was restored after repeated passage of mutant viruses, due to reversion of the mutated sequences to wild-type. However, in one case, the recovered virus retained the mutated p51↓RNH cleavage site but also developed an additional mutation, T477A, distal to the cleavage site. In this study we have characterized in detail the impact of the T477A mutation on intravirion processing of RT.

Results

While the T477A mutation arose during serial passage only with the F440V mutant background, introduction of this substitution into a variety of RT p51↓RNH cleavage site lethal mutant backgrounds was able to restore substantial infectivity and normal RT processing to these mutants. T477A had no phenotypic effect on wild-type HIV-1. We also evaluated the impact of T477A on the kinetics of intravirion Gag-Pol polyprotein processing of p51↓RNH cleavage site mutants using the protease inhibitor ritonavir. Early processing intermediates accumulated in p51↓RNH cleavage site mutant viruses, whereas introduction of T477A promoted the completion of processing and formation of the fully processed RT p66/p51 heterodimer.

Conclusions

This work highlights the extraordinary plasticity of HIV-1 in adapting to seemingly lethal mutations that prevent RT heterodimer formation during virion polyprotein maturation. The ability of T477A to restore RT heterodimer formation and thus intravirion stability of the enzyme may arise from increased conformation flexibility in the RT p51↓RNH cleavage site region, due to loss of a hydrogen bond associated with the normal threonine residue, thereby enabling proteolytic cleavage near the normal RT p51↓RNH cleavage site.

Characterization of the CI repressor protein encoded by the temperate lactococcal phage TP901-1

The gene regulatory mechanism determining the developmental pathway of the temperate bacteriophage TP901-1 is regulated by two phage-encoded proteins, CI and MOR. Functional domains of the CI repressor were investigated by introducing linkers of 15 bp at various positions in cI and by limited proteolysis of purified CI protein. We show that insertions of five amino acids at positions in the N-terminal half of CI resulted in mutant proteins that could no longer repress transcription from the lytic promoter, P(L). We confirmed that the N-terminal domain of CI contains the DNA binding site, and we showed that this part of the protein is tightly folded, whereas the central part and the C-terminal part of CI seem to contain more flexible structures. Furthermore, insertions at several different positions in the central part of the CI protein reduced the cooperative binding of CI to the operator sites and possibly altered the interaction with MOR.

Enterotoxigenic Escherichia coli EtpA mediates adhesion between flagella and host cells

Adhesion to epithelial cells1 and flagella-mediated motility are critical virulence traits for many Gram-negative pathogens, including enterotoxigenic Escherichia coli (ETEC)2, a major cause of diarrhoea in travellers and children in developing countries3,4. Many flagellated pathogens export putative adhesins belonging to the two-partner secretion (TPS) family5. However, the actual function of these adhesins remains largely undefined. Here we demonstrate that EtpA, a TPS exoprotein adhesin of enterotoxigenic Escherichia coli6, mimics and interacts with highly conserved regions of flagellin, the major subunit of flagella, and that these interactions are critical for adherence and intestinal colonization. Although conserved regions of flagellin are mostly buried in the flagellar shaft7, our results suggest that they are at least transiently exposed at the tips of flagella where they capture EtpA adhesin molecules for presentation to eukaryotic receptors. Similarity of EtpA to molecules encoded by other motile pathogens suggests a potential common paradigm for bacterial adhesion, while participation of conserved regions of flagellin in adherence has implications for development of vaccines for Gram-negative pathogens.

Probing the α-complementing domain of E. coli β-galactosidase with use of an insertional pentapeptide mutagenesis strategy based on Mu in vitro DNA transposition

Protein structure-function relationships can be studied by using linker insertion mutagenesis, which efficiently identifies essential regions in target proteins. Bacteriophage Mu in vitro DNA transposition was used to generate an extensive library of pentapeptide insertion mutants within the alpha-complementing domain 1 of Escherichia coli beta-galactosidase, yielding mutants at 100% efficiency. Each mutant contained an accurate 15-bp insertion that translated to five additional amino acids within the protein, and the insertions were distributed essentially randomly along the target sequence. Individual mutants (alpha-donors) were analyzed for their ability to restore (by alpha-complementation) beta-galactosidase activity of the M15 deletion mutant (alpha-acceptor), and the data were correlated to the structure of the beta-galactosidase tetramer. Most of the insertions were well tolerated, including many of those disrupting secondary structural elements even within the protein's interior. Nevertheless, certain sites were sensitive to mutations, indicating both known and previously unknown regions of functional importance. Inhibitory insertions within the N-terminus and loop regions most likely influenced protein tetramerization via direct local effects on protein-protein interactions. Within the domain 1 core, the insertions probably caused either lateral shifting of the polypeptide chain toward the protein's exterior or produced more pronounced structural distortions. Six percent of the mutant proteins exhibited temperature sensitivity, in general suggesting the method's usefulness for generation of conditional phenotypes. The method should be applicable to any cloned protein-encoding gene.

The helix-turn-helix motif of the coliphage 186 immunity repressor binds to two distinct recognition sequences

The CI protein of coliphage 186 is responsible for maintaining the stable lysogenic state. To do this CI must recognize two distinct DNA sequences, termed A type sites and B type sites. Here we investigate whether CI contains two separate DNA binding motifs or whether CI has one motif that recognizes two different operator sequences. Sequence alignment with 186-like repressors predicts an N-terminal helix-turn-helix (HTH) motif, albeit with poor homology to a large master set of such motifs. The domain structure of CI was investigated by linker insertion mutagenesis and limited proteolysis. CI consists of an N-terminal domain, which weakly dimerizes and binds both A and B type sequences, and a C-terminal domain, which associates to octamers but is unable to bind DNA. A fusion protein consisting of the 186 N-terminal domain and the phage lambda oligomerization domain binds A and B type sequences more efficiently than the isolated 186 CI N-terminal domain, hence the 186 C-terminal domain likely mediates oligomerization and cooperativity. Site-directed mutation of the putative 186 HTH motif eliminates binding to both A and B type sites, supporting the idea that binding to the two distinct DNA sequences is mediated by a variant HTH motif.

Comprehensive mutational analysis of the Moloney murine leukemia virus envelope protein

The envelope (Env) protein of Moloney murine leukemia virus is the primary mediator of viral entry. We constructed a large pool of insertion mutations in the env gene and analyzed the fitness of each mutant in completing two critical steps in the virus life cycle: (i) the expression and delivery of the Env protein to the cell surface during virion assembly and (ii) the infectivity of virions displaying the mutant proteins. The majority of the mutants were poorly expressed at the producer cell surface, suggesting folding defects due to the presence of the inserted residues. The mutants with residual infectivity had insertions either in the amino-terminal signal sequence region, two disulfide-bonded loops in the receptor binding domain, discrete regions of the carboxy-terminal region of the surface subunit (SU), or the cytoplasmic tail. Insertions that allowed the mutants to reach the cell surface but not to mediate detectable infection were located within the amino-terminal sequence of the mature Env, within the SU carboxy-terminal region, near putative receptor binding residues, and throughout the fusion peptide. Independent analysis of select mutants in this group allowed more precise identification of the defect in Env function. Mapping of mutant phenotypes to a structural model of the receptor-binding domain provides insights into the protein's functional organization. The high-resolution functional map reported here will be valuable for the engineering of the Env protein for a variety of uses, including gene therapy.

Linker insertion mutagenesis based on IS21 transposition: isolation of an AMP-insensitive variant of catabolic ornithine carbamoyltransferase from Pseudomonas aeruginosa

The bacterial insertion sequence IS21 when repeated in tandem efficiently promotes non-replicative cointegrate formation in Escherichia coli. An IS21-IS21 junction region which had been engineered to contain unique SalI and BglII sites close to the IS21 termini was not affected in the ability to form cointegrates with target plasmids. Based on this finding, a novel procedure of random linker insertion mutagenesis was devised. Suicide plasmids containing the engineered junction region (pME5 and pME6) formed cointegrates with target plasmids in an E.coli host strain expressing the IS21 transposition proteins in trans. Cointegrates were resolved in vitro by restriction with SalI or BglII and ligation; thus, insertions of four or 11 codons, respectively, were created in the target DNA, practically at random. The cloned Pseudomonas aeruginosa arcB gene encoding catabolic ornithine carbamoyltransferase was used as a target. Of 20 different four-codon insertions in arcB, 11 inactivated the enzyme. Among the remaining nine insertion mutants which retained enzyme activity, three enzyme variants had reduced affinity for the substrate ornithine and one had lost recognition of the allosteric activator AMP. The linker insertions obtained illustrate the usefulness of the method in the analysis of structure-function relationships of proteins.

Insertion of in-frame sequence tags into proteins using transposons

Several methods based on the use of transposons allow the efficient generation of relatively short (e.g., <35 residues) in-frame insertions in proteins. The analysis of such insertions has provided a simple means to identify sites that tolerate dramatic sequence changes without loss of function ("permissive" sites) and to dissect protein structure-function relationships. In addition, epitope and protease cleavage site "tags" introduced in such insertions have made it possible to analyze the oligomerization state and transmembrane topologies of several proteins. Finally, the DNA inserted by these methods generally carries restriction sites which may facilitate the construction of in-frame deletions and gene fusions encoding a variety of chimeric proteins.

Structure-function correlations in the XerD site-specific recombinase revealed by pentapeptide scanning mutagenesis

Xer-mediated site-specific recombination contributes to the stability of circular chromosomes in bacteria by resolving plasmid multimers and chromosome dimers to monomers prior to cell division. Two related site-specific recombinases, XerC and XerD, each catalyse one pair of strand exchange during Xer recombination. In order to relate the recently determined structure of XerD to its function, the XerD protein was subjected to pentapeptide scanning mutagenesis, which leads to a variable five amino acid cassette being introduced randomly into the target protein. This has allowed identification of regions of XerD involved in specific DNA binding, in communicating with the partner recombinase, XerC, and in catalysis and its control. The C-terminal domain of XerD, comprising two-thirds of the protein, contains the catalytic active site and comprises ten alpha helices (alphaE to alphaN) and a beta hairpin. A flexible linker connects this domain to the N-terminal domain that comprises four alpha helices (alphaA to alphaD). Pentapeptide insertions into alphaB, alphaD, alphaG, or alphaJ interfered with DNA binding. Helices alphaG and alphaJ comprise a pseudo helix-turn-helix DNA binding motif that may provide specificity of recombinase binding. An insertion in alphaL, adjacent to an active site arginine residue, led to loss of cooperative interactions between XerC and XerD and abolished recombination activity. Other insertions close to active site residues also abolished recombination activity. Proteins with an insertion in the beta hairpin turn bound DNA, interacted cooperatively with XerC and had a phenotype that is consistent with the protein being defective in XerD catalysis. This beta hairpin appears to be highly conserved in related proteins. Insertions at a number of dispersed locations did not impair XerD catalytic activity or DNA binding, but failed to allow XerC catalysis in vivo, indicating that several sites of interaction between XerD and XerC may be important for activation of XerC catalysis by XerD.

Pentapeptide scanning mutagenesis: random insertion of a variable five amino acid cassette in a target protein

A new insertion method for probing protein functional organization was developed. The method relies on the random insertion of transposon Tn 4430 and subsequent in vitro deletion of the bulk of the transposon after which a 15 bp insertion remains within the target gene. This results in pentapeptide insertions randomly distributed in the target protein. Characterization of 23 pentapeptide insertions in TEM-1beta-lactamase demonstrated the utility of the method. The phenotypes associated with the mutated beta-lactamase proteins equated both with the sorts of local peptide structures in which the pentapeptide insertions occurred and their position in the three-dimensional structure of the enzyme.

In vivo nickel insertion into the carbon monoxide dehydrogenase of Rhodospirillum rubrum: molecular and physiological characterization of cooCTJ

The products of cooCTJ are involved in normal in vivo Ni insertion into the carbon monoxide dehydrogenase (CODH) of Rhodospirillum rubrum. Located on a 1.5-kb DNA segment immediately downstream of the CODH structural gene (cooS), two of the genes encode proteins that bear motifs reminiscent of other (urease and hydrogenase) Ni-insertion systems: a nucleoside triphosphate-binding motif near the N terminus of CooC and a run of 15 histidine residues regularly spaced over the last 30 amino acids of the C terminus of CooJ. A Gm(r)omega-linker cassette was developed to create both polar and nonpolar (60 bp) insertions in the cooCTJ region, and these, along with several deletions, were introduced into R. rubrum by homologous recombination. Analysis of the exogenous Ni levels required to sustain CO-dependent growth of the R. rubrum mutants demonstrated different phenotypes: whereas the wild-type strain and a mutant bearing a partial cooJ deletion (of the region encoding the histidine-rich segment) grew at 0.5 microM Ni supplementation, strains bearing Gm(r)omega-linker cassettes in cooT and cooJ required approximately 50-fold-higher Ni levels and all cooC insertion strains, bearing polar or nonpolar insertions, grew optimally at 550 microM Ni.

Bipartite DNA-binding region of the Epstein-Barr virus BMRF1 product essential for DNA polymerase accessory function

The Epstein-Barr virus (EBV) BMRF1 gene product is necessary for DNA polymerase catalytic subunit (BALF5) activity in 100 mM ammonium sulfate. To map regions of BMRF1 necessary for polymerase accessory function, linker insertion and deletion mutant BMRF1 polypeptides were expressed by in vitro transcription-translation and assayed for DNA polymerase elongation activity and binding to double-stranded DNA (dsDNA)-cellulose. Amino-terminal deletions up to residue 303 were defective for stimulation of elongation. Deletions between residues 44 and 194 and residues 238 and 303 abolished binding to dsDNA-cellulose. The region from residues 194 to 238, therefore, is necessary for stimulation of BALF5 elongation but dispensable for dsDNA-cellulose binding. Deletion analysis also localized reactive epitopes of two neutralizing monoclonal antibodies to BMRF1 to a carboxy-terminal region which is dispensable for activity. These data suggest that a bipartite DNA-binding region is an essential component of the DNA polymerase accessory function and that the two noncontiguous regions are separated by a region (residues 194 to 217) which is essential for stimulation; therefore, it may interact with the BALF5 catalytic subunit of EBV DNA polymerase. Both EBV BMRF1 and herpes simplex virus UL42 gene products are DNA polymerase accessory proteins which bind dsDNA and increase the processivity of their corresponding catalytic components. Outstanding similarities between their primary amino acid sequences are not evident. However, it appears that their structural organizations are similar.

Identification of functional regions of herpes simplex virus glycoprotein gD by using linker-insertion mutagenesis

Glycoprotein gD is a component of the herpes simplex virus (HSV) envelope essential for virus entry into susceptible cells. Previous studies using deletion and point mutations identified a functional domain of HSV-1 gD (gD-1) from residues 231 to 244. However, many of the deletion mutations had global effects on gD-1 structure, thus precluding assessment of the functional role of large portions of the protein. In this study, we constructed a large panel of linker-insertion mutants in the genes for gD-1 and HSV-2 gD (gD-2). The object was to create mutations which would have only localized effects on protein structure but might have profound effects on gD function. The mutant proteins were expressed in transiently transfected L cells. Monoclonal antibodies (MAbs) were used as probes of gD structure. We also examined protein aggregation and appearance of the mutant glycoproteins on the transfected cell surface. A complementation assay measured the ability of the mutant proteins to rescue the infectivity of the gD-null virus, FgD beta, in trans. Most of the mutants were recognized by one or more MAbs to discontinuous epitopes, were transported to the transfected cell surface, and rescued FgD beta virus infectivity. However, some mutants which retained structure were unable to complement FgD beta. These mutants were clustered in four regions of gD. Region III (amino acids 222 to 246) overlaps the region previously defined by gD-1 deletion mutants. The others, from 27 through 43 (region I), from 125 through 161 (region II), and from 277 to 310 (region IV), are newly described. Region IV, immediately upstream of the transmembrane anchor sequence, was previously postulated to be part of a putative stalk structure. However, residues 277 to 300 are directly involved in gD function. The linker-insertion mutants were useful for mapping MAb AP7, a previously ungrouped neutralizing MAb, and provided further information concerning other discontinuous epitopes. The mapping data suggest that regions I through IV are physically near each other in the folded structure of gD and may form a single functional domain.