Intron mobility in the T-even phages: high frequency inheritance of group I introns promoted by intron open reading frames

Perpetuating the homing endonuclease life cycle: identification of mutations that modulate and change I-TevI cleavage preference

Homing endonucleases are sequence-tolerant DNA endonucleases that act as mobile genetic elements. The ability of homing endonucleases to cleave substrates with multiple nucleotide substitutions suggests a high degree of adaptability in that changing or modulating cleavage preference would require relatively few amino acid substitutions. Here, using directed evolution experiments with the GIY-YIG homing endonuclease I-TevI that targets the thymidylate synthase gene of phage T4, we readily isolated variants that dramatically broadened I-TevI cleavage preference, as well as variants that fine-tuned cleavage preference. By combining substitutions, we observed an ∼10 000-fold improvement in cleavage on some substrates not cleaved by the wild-type enzyme, correlating with a decrease in readout of information content at the cleavage site. Strikingly, we were able to change the cleavage preference of I-TevI to that of the isoschizomer I-BmoI which targets a different cleavage site in the thymidylate synthase gene, recapitulating the evolution of cleavage preference in this family of homing endonucleases. Our results define a strategy to isolate GIY-YIG nuclease domains with distinct cleavage preferences, and provide insight into how homing endonucleases may escape a dead-end life cycle in a population of saturated target sites by promoting transposition to different target sites.

Homing endonucleases from mobile group I introns: discovery to genome engineering

Homing endonucleases are highly specific DNA cleaving enzymes that are encoded within genomes of all forms of microbial life including phage and eukaryotic organelles. These proteins drive the mobility and persistence of their own reading frames. The genes that encode homing endonucleases are often embedded within self-splicing elements such as group I introns, group II introns and inteins. This combination of molecular functions is mutually advantageous: the endonuclease activity allows surrounding introns and inteins to act as invasive DNA elements, while the splicing activity allows the endonuclease gene to invade a coding sequence without disrupting its product. Crystallographic analyses of representatives from all known homing endonuclease families have illustrated both their mechanisms of action and their evolutionary relationships to a wide range of host proteins. Several homing endonucleases have been completely redesigned and used for a variety of genome engineering applications. Recent efforts to augment homing endonucleases with auxiliary DNA recognition elements and/or nucleic acid processing factors has further accelerated their use for applications that demand exceptionally high specificity and activity.

Homing endonucleases: from genetic anomalies to programmable genomic clippers

Homing endonucleases are strong drivers of genetic exchange and horizontal transfer of both their own genes and their local genetic environment. The mechanisms that govern the function and evolution of these genetic oddities have been well documented over the past few decades at the genetic, biochemical, and structural levels. This wealth of information has led to the manipulation and reprogramming of the endonucleases and to their exploitation in genome editing for use as therapeutic agents, for insect vector control and in agriculture. In this chapter we summarize the molecular properties of homing endonucleases and discuss their strengths and weaknesses in genome editing as compared to other site-specific nucleases such as zinc finger endonucleases, TALEN, and CRISPR-derived endonucleases.

The monomeric GIY-YIG homing endonuclease I-BmoI uses a molecular anchor and a flexible tether to sequentially nick DNA

The GIY-YIG nuclease domain is found within protein scaffolds that participate in diverse cellular pathways and contains a single active site that hydrolyzes DNA by a one-metal ion mechanism. GIY-YIG homing endonucleases (GIY-HEs) are two-domain proteins with N-terminal GIY-YIG nuclease domains connected to C-terminal DNA-binding and they are thought to function as monomers. Using I-BmoI as a model GIY-HE, we test mechanisms by which the single active site is used to generate a double-strand break. We show that I-BmoI is partially disordered in the absence of substrate, and that the GIY-YIG domain alone has weak affinity for DNA. Significantly, we show that I-BmoI functions as a monomer at all steps of the reaction pathway and does not transiently dimerize or use sequential transesterification reactions to cleave substrate. Our results are consistent with the I-BmoI DNA-binding domain acting as a molecular anchor to tether the GIY-YIG domain to substrate, permitting rotation of the GIY-YIG domain to sequentially nick each DNA strand. These data highlight the mechanistic differences between monomeric GIY-HEs and dimeric or tetrameric GIY-YIG restriction enzymes, and they have implications for the use of the GIY-YIG domain in genome-editing applications.

Romulus and Remus, two phage isolates representing a distinct clade within the Twortlikevirus genus, display suitable properties for phage therapy applications

The renewed interest in controlling Staphylococcus aureus infections using their natural enemies, bacteriophages, has led to the isolation of a limited number of virulent phages so far. These phages are all members of the Twortlikevirus, displaying little variance. We present two novel closely related (95.9% DNA homology) lytic myoviruses, Romulus and Remus, with double-stranded DNA (dsDNA) genomes of 131,333 bp and 134,643 bp, respectively. Despite their relatedness to Staphylococcus phages K, G1, ISP, and Twort and Listeria phages A511 and P100, Romulus and Remus can be proposed as isolates of a new species within the Twortlikevirus genus. A distinguishing feature for these phage genomes is the unique distribution of group I introns compared to that in other staphylococcal myoviruses. In addition, a hedgehog/intein domain was found within their DNA polymerase genes, and an insertion sequence-encoded transposase exhibits splicing behavior and produces a functional portal protein. From a phage therapy application perspective, Romulus and Remus infected approximately 70% of the tested S. aureus isolates and displayed promising lytic activity against these isolates. Furthermore, both phages showed a rapid initial adsorption and demonstrated biofilm-degrading capacity in a proof-of-concept experiment.

A homing endonuclease and the 50-nt ribosomal bypass sequence of phage T4 constitute a mobile DNA cassette

Since its initial description more than two decades ago, the ribosome bypass (or "hop") sequence of phage T4 stands out as a uniquely extreme example of programmed translational frameshifting. The gene for a DNA topoisomerase subunit of T4 has been split by a 1-kb insertion into two genes that retain topoisomerase function. A second 50-nt insertion, beginning with an in-phase stop codon, is inserted near the start of the newly created downstream gene 60. Instead of terminating at this stop codon, approximately half of the ribosomes skip 50 nucleotides and continue translation in a new reading frame. However, no functions, regulatory or otherwise, have been imputed for the truncated peptide that results from termination at codon 46 or for the bypass sequence itself. Moreover, how this unusual mRNA organization arose and why it is maintained have never been explained. We show here that a homing endonuclease (MobA) is encoded in the insertion that created gene 60, and the mobA gene together with the bypass sequence constitute a mobile DNA cassette. The bypass sequence provides protection against self-cleavage by the nuclease, whereas the nuclease promotes horizontal spread of the entire cassette to related bacteriophages. Group I introns frequently provide protection against self-cleavage by associated homing endonucleases. We present a scenario by which the bypass sequence, which is otherwise a unique genetic element, might have been derived from a degenerate group I intron.

Divalent metal ion differentially regulates the sequential nicking reactions of the GIY-YIG homing endonuclease I-BmoI

Homing endonucleases are site-specific DNA endonucleases that function as mobile genetic elements by introducing double-strand breaks or nicks at defined locations. Of the major families of homing endonucleases, the modular GIY-YIG endonucleases are least understood in terms of mechanism. The GIY-YIG homing endonuclease I-BmoI generates a double-strand break by sequential nicking reactions during which the single active site of the GIY-YIG nuclease domain must undergo a substantial reorganization. Here, we show that divalent metal ion plays a significant role in regulating the two independent nicking reactions by I-BmoI. Rate constant determination for each nicking reaction revealed that limiting divalent metal ion has a greater impact on the second strand than the first strand nicking reaction. We also show that substrate mutations within the I-BmoI cleavage site can modulate the first strand nicking reaction over a 314-fold range. Additionally, in-gel DNA footprinting with mutant substrates and modeling of an I-BmoI-substrate complex suggest that amino acid contacts to a critical GC-2 base pair are required to induce a bottom-strand distortion that likely directs conformational changes for reaction progress. Collectively, our data implies mechanistic roles for divalent metal ion and substrate bases, suggesting that divalent metal ion facilitates the re-positioning of the GIY-YIG nuclease domain between sequential nicking reactions.

Redox-responsive zinc finger fidelity switch in homing endonuclease and intron promiscuity in oxidative stress

It is well understood how mobile introns home to allelic sites, but how they are stimulated to transpose to ectopic locations on an evolutionary timescale is unclear. Here we show that a group I intron can move to degenerate sites under oxidizing conditions. The phage T4 td intron endonuclease, I-TevI, is responsible for this infidelity. We demonstrate that I-TevI, which promotes mobility and is subject to autorepression and translational control, is also regulated posttranslationally by a redox mechanism. Redox regulation is exercised by a zinc finger (ZF) in a linker that connects the catalytic domain of I-TevI to the DNA binding domain. Four cysteines coordinate Zn(2+) in the ZF, which ensures that I-TevI cleaves its DNA substrate at a fixed distance, 23-25 nucleotides upstream of the intron insertion site. We show that the fidelity of I-TevI cleavage is controlled by redox-responsive Zn(2+) cycling. When the ZF is mutated, or after exposure of the wild-type I-TevI to H(2)O(2), intron homing to degenerate sites is increased, likely because of indiscriminate DNA cleavage. These results suggest a mechanism for rapid intron dispersal, joining recent descriptions of the activation of biomolecular processes by oxidative stress through cysteine chemistry.

Mobile DNA elements in T4 and related phages

Mobile genetic elements are common inhabitants of virtually every genome where they can exert profound influences on genome structure and function in addition to promoting their own spread within and between genomes. Phage T4 and related phage have long served as a model system for understanding the molecular mechanisms by which a certain class of mobile DNA, homing endonucleases, promote their spread. Homing endonucleases are site-specific DNA endonucleases that initiate mobility by introducing double-strand breaks at defined positions in genomes lacking the endonuclease gene, stimulating repair and recombination pathways that mobilize the endonuclease coding region. In phage T4, homing endonucleases were first discovered as encoded within the self-splicing td, nrdB and nrdD introns of T4. Genomic data has revealed that homing endonucleases are extremely widespread in T-even-like phage, as evidenced by the astounding fact that ~11% of the T4 genome encodes homing endonuclease genes, with most of them located outside of self-splicing introns. Detailed studies of the mobile td intron and its encoded endonuclease, I-TevI, have laid the foundation for genetic, biochemical and structural aspects that regulate the mobility process, and more recently have provided insights into regulation of homing endonuclease function. Here, we summarize the current state of knowledge regarding T4-encoded homing endonucleases, with particular emphasis on the td/I-TevI model system. We also discuss recent progress in the biology of free-standing endonucleases, and present areas of future research for this fascinating class of mobile genetic elements.

Better late than early: delayed translation of intron-encoded endonuclease I-TevI is required for efficient splicing of its host group I intron

The td group I intron interrupting the thymidylate synthase (TS) gene of phage T4 is a mobile intron that encodes the homing endonuclease I-TevI. Efficient RNA splicing of the intron is required to restore function of the TS gene, while expression of I-TevI from within the intron is required to initiate intron mobility. Three distinct layers of regulation temporally limit I-TevI expression to late in the T4 infective cycle, yet the biological rationale for stringent regulation has not been tested. Here, we deleted key control elements to deregulate I-TevI expression at early and middle times post T4 infection. Strikingly, we found that deregulation of I-TevI, or of a catalytically inactive variant, generated a thymidine-dependent phenotype that is caused by a reduction in td intron splicing. Prematurely terminating I-TevI translation restores td splicing, full-length TS synthesis, and rescues the thymidine-dependent phenotype. We suggest that stringent translational control of I-TevI evolved to prevent the ribosome from disrupting key structural elements of the td intron that are required for splicing and TS function at early and middle times post T4 infection. Analogous translational regulatory mechanisms in unrelated intron-open reading frame arrangements may also function to limit deleterious consequences on splicing and host gene function.

A unified genetic, computational and experimental framework identifies functionally relevant residues of the homing endonuclease I-BmoI

Insight into protein structure and function is best obtained through a synthesis of experimental, structural and bioinformatic data. Here, we outline a framework that we call MUSE (mutual information, unigenic evolution and structure-guided elucidation), which facilitated the identification of previously unknown residues that are relevant for function of the GIY-YIG homing endonuclease I-BmoI. Our approach synthesizes three types of data: mutual information analyses that identify co-evolving residues within the GIY-YIG catalytic domain; a unigenic evolution strategy that identifies hyper- and hypo-mutable residues of I-BmoI; and interpretation of the unigenic and co-evolution data using a homology model. In particular, we identify novel positions within the GIY-YIG domain as functionally important. Proof-of-principle experiments implicate the non-conserved I71 as functionally relevant, with an I71N mutant accumulating a nicked cleavage intermediate. Moreover, many additional positions within the catalytic, linker and C-terminal domains of I-BmoI were implicated as important for function. Our results represent a platform on which to pursue future studies of I-BmoI and other GIY-YIG-containing proteins, and demonstrate that MUSE can successfully identify novel functionally critical residues that would be ignored in a traditional structure-function analysis within an extensively studied small domain of approximately 90 amino acids.

Phage T4 mobE promotes trans homing of the defunct homing endonuclease I-TevIII

Homing endonucleases are site-specific DNA endonucleases that typically function as mobile genetic elements by introducing a double-strand break (DSB) in genomes that lack the endonuclease, resulting in a unidirectional gene conversion event that mobilizes the homing endonuclease gene and flanking DNA. Here, we characterize phage T4-encoded mobE, a predicted free-standing HNH family homing endonuclease. We show that mobE is promoterless and dependent on upstream transcription for expression, and that an internal intrinsic terminator regulates mobE transcript levels. Crucially, in vivo mapping experiments revealed a MobE-dependent, strand-specific nick in the non-coding strand of the nrdB gene of phage T2. An internal deletion of the predicted HNH catalytic motif of MobE abolishes nicking, and reduces high-frequency inheritance of mobE. Sequence polymorphisms of progeny phage that inherit mobE are consistent with DSB repair pathways. Significantly, we found that mobility of the neighboring I-TevIII, a defunct homing endonuclease encoded within a group I intron interrupting the nrdB gene of phage T4, was dependent on an intact mobE gene. Thus, our data indicate that the stagnant nrdB intron and I-TevIII are mobilized in trans as a consequence of a MobE-dependent gene conversion event, facilitating persistence of genetic elements that have no inherent means of promoting their own mobility.

Homing endonuclease I-TevIII: dimerization as a means to a double-strand break

Homing endonucleases are unusual enzymes, capable of recognizing lengthy DNA sequences and cleaving site-specifically within genomes. Many homing endonucleases are encoded within group I introns, and such enzymes promote the mobility reactions of these introns. Phage T4 has three group I introns, within the td, nrdB and nrdD genes. The td and nrdD introns are mobile, whereas the nrdB intron is not. Phage RB3 is a close relative of T4 and has a lengthier nrdB intron. Here, we describe I-TevIII, the H-N-H endonuclease encoded by the RB3 nrdB intron. In contrast to previous reports, we demonstrate that this intron is mobile, and that this mobility is dependent on I-TevIII, which generates 2-nt 3' extensions. The enzyme has a distinct catalytic domain, which contains the H-N-H motif, and DNA-binding domain, which contains two zinc fingers required for interaction with the DNA substrate. Most importantly, I-TevIII, unlike the H-N-H endonucleases described so far, makes a double-strand break on the DNA homing site by acting as a dimer. Through deletion analysis, the dimerization interface was mapped to the DNA-binding domain. The unusual propensity of I-TevIII to dimerize to achieve cleavage of both DNA strands underscores the versatility of the H-N-H enzyme family.

Self-splicing of the bacteriophage T4 group I introns requires efficient translation of the pre-mRNA in vivo and correlates with the growth state of the infected bacterium

Bacteriophage T4 contains three self-splicing group I introns in genes in de novo deoxyribonucleotide biosynthesis (in td, coding for thymidylate synthase and in nrdB and nrdD, coding for ribonucleotide reductase). Their presence in these genes has fueled speculations that the introns are retained within the phage genome due to a possible regulatory role in the control of de novo deoxyribonucleotide synthesis. To study whether sequences in the upstream exon interfere with proper intron folding and splicing, we inhibited translation in T4-infected bacteria as well as in bacteria containing recombinant plasmids carrying the nrdB intron. Splicing was strongly reduced for all three T4 introns after the addition of chloramphenicol during phage infection, suggesting that the need for translating ribosomes is a general trait for unperturbed splicing. The splicing of the cloned nrdB intron was markedly reduced in the presence of chloramphenicol or when translation was hindered by stop codons inserted in the upstream exon. Several exon regions capable of forming putative interactions with nrdB intron sequences were identified, and the removal or mutation of these exon regions restored splicing efficiency in the absence of translation. Interestingly, splicing of the cloned nrdB intron was also reduced as cells entered stationary phase and splicing of all three introns was reduced upon the T4 infection of stationary-phase bacteria. Our results imply that conditions likely to be frequently encountered by natural phage populations may limit the self-splicing efficiency of group I introns. This is the first time that environmental effects on bacterial growth have been linked to the regulation of splicing of phage introns.

Homing endonuclease genes: the rise and fall and rise again of a selfish element

Homing endonuclease genes (HEGs) are selfish genetic elements that spread by first cleaving chromosomes that do not contain them and then getting copied across to the broken chromosome as a byproduct of the repair process. The success of this strategy will depend on the opportunities for homing--in other words, the frequency with which HEG(+) and HEG(-) chromosomes come into contact--which varies widely among host taxa. HEGs are also unusual in that the selection pressure for endonuclease function disappears if they become fixed in a population, which makes them susceptible to degeneration and imposes a need for regular horizontal transmission between species. HEGs will be selected to reduce the harm done to the host organism, and this is expected to influence the evolution of their sequence specificity and maturase functions. HEGs may also be domesticated by their hosts, and are currently being put to human uses.

Intron-encoded homing endonuclease I-TevI also functions as a transcriptional autorepressor

Customary binding sites of intron-encoded homing endonucleases lie within cognate intronless alleles, at the so-called homing sites. Here, we describe a novel, high-affinity binding site for I-TevI endonuclease, encoded within the group I td intron of phage T4. This site is an operator that overlaps the T4 late promoter, which drives I-TevI expression from within the td intron. I-TevI binds the operator and homing sites with equal affinity, and functions as a transcriptional autorepressor. Distinct sequence and spacing requirements of the catalytic domain result in reduced cleavage activity on operator DNA. Crystallographic studies showed that the overall interactions of the DNA-binding domain with the operator and homing sites are similar, but have some different hydrogen-bonding contacts. We present a model in which the flexibility in protein-DNA interactions allows I-TevI to bind variant intronless alleles to promote intron mobility while facilitating its function in autorepression, and thereby persistence in its host.

Distribution, sequence homology, and homing of group I introns among T-even-like bacteriophages: evidence for recent transfer of old introns

Self-splicing group I introns are being found in an increasing number of bacteriophages. Most introns contain an open reading frame coding for a homing endo-nuclease that confers mobility to both the intron and the homing endonuclease gene (HEG). The frequent occurrence of intron/HEG has raised questions whether group I introns are spread via horizontal transfer between phage populations. We have determined complete sequences for the known group I introns among T-even-like bacteriophages together with sequences of the intron-containing genes td, nrdB, and nrdD from phages with and without introns. A previously uncharacterized phage isolate, U5, is shown to contain all three introns, the only phage besides T4 found with a "full set" of these introns. Sequence analysis of td and nrdB genes from intron-containing and intronless phages provides evidence that recent horizontal transmission of introns has occurred among the phages. The fact that several of the HEGs have suffered deletions rendering them non-functional implies that the homing endonucleases are of no selective advantage to the phage and are rapidly degenerating and probably dependent upon frequent horizontal transmissions for maintenance within the phage populations. Several of the introns can home to closely related intronless phages during mixed infections. However, the efficiency of homing varies and is dependent on homology in regions flanking the intron insertion site. The occurrence of optional genes flanking the respective intron-containing gene can strongly affect the efficiency of homing. These findings give further insight into the mechanisms of propagation and evolution of group I introns among the T-even-like bacteriophages.

SegG Endonuclease Promotes Marker Exclusion and Mediates Co-conversion from a Distant Cleavage Site

Bacteriophages T2 and T4 are closely related T-even phages. However, T4 genetic markers predominate in the progeny of mixed infections, a phenomenon termed marker exclusion. One region previously mapped where the frequency of T2 markers in the progeny is extremely low is located around gene 32. Here, we describe SegG, a GIY-YIG family endonuclease adjacent to gene 32 of phage T4 that is absent from phage T2. In co-infections with T2 and T4, cleavage in T2 gene 32 by T4-encoded SegG initiates a gene conversion event that results in replacement of T2 gene 32 markers with the corresponding T4 sequence. Interestingly, segG inheritance is limited, apparently because of the physical separation of its cleavage and insertion sites, which are 332 base-pairs apart. This contrasts with efficient inheritance of the phage T4 td group I intron and its endonuclease, I-TevI, for which the distance separating the I-TevI cleavage site and td insertion site is 23 base-pairs. Furthermore, we show that co-conversion tracts generated by repair of SegG and I-TevI double-strand breaks contribute to the localized exclusion of T2 markers. Our results demonstrate that the endonuclease activities of SegG and I-TevI promote the spread of these two endonucleases to progeny phage, consistent with their role as selfish genetic elements, and also provide a mechanism by which the genetic contribution of T2 markers to progeny phage is reduced.

Intein-mediated purification of cytotoxic endonuclease I-TevI by insertional inactivation and pH-controllable splicing

An intein-mediated approach was developed for expression and affinity purification of a protein that is lethal to Escherichia coli. The protein, I-TevI, is an intron-encoded endonuclease. The approach involved the insertional inactivation of I-TevI with a controllable mini-intein placed in front of a cysteine required for splicing (an I-TevI::intein fusion). The purification was facilitated by a chitin-binding domain inserted into the mini-intein. Affinity purification of the I-TevI::intein fusion precursor on a chitin column was followed by pH-controllable splicing to restore the structure and function of I-TevI. To study the impact of the insertion context on I-TevI inactivation, the chimeric intein was inserted independently in front of seven cysteines of I-TevI. One of the seven intein integrants yielded I-TevI of high activity. This technique is, in principle, generalizable to the expression and purification of other cytotoxic proteins and is amenable to scale-up.

Characterization of homing endonucleases

Homing endonucleases are a class of site-specific DNA endonucleases encoded by open reading frames within introns and inteins. They initiate the mobility of their host element by recognizing intronless or inteinless alleles of their host gene and making a double-strand break. The homing endonucleases are notable for their long target sites and a tolerance for sequence polymorphisms in their substrates. The methods used to study homing endonucleases are similar to those used to study protein-DNA interactions in general. However, some variations and specialized techniques are useful in characterizing homing endonucleases and these methods are discussed.

Heterogeneous yet similar introns reside in identical positions of the rRNA genes in natural isolates of the archaeon Aeropyrum pernix

Some archaeal ribosomal DNA (rDNA) introns carry homing endonuclease-like genes and are therefore assumed to propagate by "intron homing". A previous study demonstrated that three introns are located within the rRNA operon (arnSL) of Aeropyrum pernix strain K1, two of which, Ialpha and Igamma, harbor open reading frames (ORFs) encoding putative LAGLIDADG-type endonucleases. In an effort to understand further the rDNA intron distribution in natural A. pernix populations, 11 A. pernix strains were isolated from marine hydrothermal biotopes, and comparative nucleotide sequence analysis of the arnSL alleles was performed. Of the 11 isolates, eight contained multiple introns, and three patterns of intron insertion were found. Three novel introns, Idelta (62 bp in length), Ivarepsilon (122 bp) and Izeta (57 bp) were identified. They were all ORF-less, but their predicted RNA secondary structure at the exon-intron junctions was consistent with the bulge-helix-bulge motif. The insertion positions and the terminal inverted repeat sequences of Idelta and Izeta were in agreement with those of Ialpha and Igamma, respectively. This suggests that these intron variants were generated by large indels (insertions/deletions) during their evolution.

Evolution of rbcL group IA introns and intron open reading frames within the colonial Volvocales (Chlorophyceae)

Mobile group I introns sometimes contain an open reading frame (ORF) possibly encoding a site-specific DNA endonuclease. However, previous phylogenetic studies have not clearly deduced the evolutionary roles of the group I intron ORFs. In this paper, we examined the phylogeny of group IA2 introns inserted in the position identical to that of the chloroplast-encoded rbcL coding region (rbcL-462 introns) and their ORFs from 13 strains of five genera (Volvox, Pleodorina, Volvulina, Astrephomene, and Gonium) of the colonial Volvocales (Chlorophyceae) and a related unicellular green alga, Vitreochlamys. The rbcL-462 introns contained an intact or degenerate ORF of various sizes except for the Gonium multicoccum rbcL-462 intron. Partial amino acid sequences of some rbcL-462 intron ORFs exhibited possible homology to the endo/excinuclease amino acid terminal domain. The distribution of the rbcL-462 introns is sporadic in the phylogenetic trees of the colonial Volvocales based on the five chloroplast exon sequences (6021 bp). Phylogenetic analyses of the conserved intron sequences resolved that the G. multicoccum rbcL-462 intron had a phylogenetic position separate from those of other colonial volvocalean rbcL-462 introns, indicating the recent horizontal transmission of the intron in the G. multicoccum lineage. However, the combined data set from conserved intron sequences and ORFs from most of the rbcL-462 introns resolved robust phylogenetic relationships of the introns that were consistent with those of the host organisms. Therefore, most of the extant rbcL-462 introns may have been vertically inherited from the common ancestor of their host organisms, whereas such introns may have been lost in other lineages during evolution of the colonial Volvocales. In addition, apparently higher synonymous substitutions than nonsynonymous substitutions in the rbcL-462 intron ORFs indicated that the ORFs might evolve under functional constraint, which could result in homing of the rbcL-462 intron in cases of spontaneous intron loss. On the other hand, the presence of intact to largely degenerate ORFs of the rbcL-462 introns within the three isolates of Gonium viridistellatum and the rare occurrence of the ORF-lacking rbcL-462 intron suggested that the ORFs might degenerate to result in the spontaneous intron loss during a very short evolutionary time following the loss of the ORF function. Thus, the sporadic distribution of the rbcL-462 introns within the colonial Volvocales can be largely explained by an equilibrium between maintenance of the introns by the intron ORF and spontaneous loss of introns when the introns do not have a functional ORF.

Related homing endonucleases I-BmoI and I-TevI use different strategies to cleave homologous recognition sites

A typical homing endonuclease initiates mobility of its group I intron by recognizing DNA both upstream and downstream of the intron insertion site of intronless alleles, preventing the endonuclease from binding and cleaving its own intron-containing allele. Here, we describe a GIY-YIG family homing endonuclease, I-BmoI, that possesses an unusual recognition sequence, encompassing 1 base pair upstream but 38 base pairs downstream of the intron insertion site. I-BmoI binds intron-containing and intronless substrates with equal affinity but can nevertheless discriminate between the two for cleavage. I-BmoI is encoded by a group I intron that interrupts the thymidylate synthase (TS) gene (thyA) of Bacillus mojavensis s87-18. This intron resembles one inserted 21 nucleotides further downstream in a homologous TS gene (td) of Escherichia coli phage T4. I-TevI, the T4 td intron-encoded GIY-YIG endonuclease, is very similar to I-BmoI, but each endonuclease gene is inserted within a different position of its respective intron. Remarkably, I-TevI and I-BmoI bind a homologous stretch of TS-encoding DNA and cleave their intronless substrates in very similar positions. Our results suggest that each endonuclease has independently evolved the ability to distinguish intron-containing from intronless alleles while maintaining the same conserved recognition sequence centered on DNA-encoding active site residues of TS.

Intron homing with limited exon homology. Illegitimate double-strand-break repair in intron acquisition by phage t4

The td intron of bacteriophage T4 encodes a DNA endonuclease that initiates intron homing to cognate intronless alleles by a double-strand-break (DSB) repair process. A genetic assay was developed to analyze the relationship between exon homology and homing efficiency. Because models predict exonucleolytic processing of the cleaved recipient leading to homologous strand invasion of the donor allele, the assay was performed in wild-type and exonuclease-deficient (rnh or dexA) phage. Efficient homing was supported by exon lengths of 50 bp or greater, whereas more limited exon lengths led to a precipitous decline in homing levels. However, extensive homology in one exon still supported elevated homing levels when the other exon was completely absent. Analysis of these "one-sided" events revealed recombination junctions at ectopic sites of microhomology and implicated nucleolytic degradation in illegitimate DSB repair in T4. Interestingly, homing efficiency with extremely limiting exon homology was greatly elevated in phage deficient in the 3'-5' exonuclease, DexA, suggesting that the length of 3' tails is a major determinant of the efficiency of DSB repair. Together, these results suggest that illegitimate DSB repair may provide a means by which introns can invade ectopic sites.

Unexpected abundance of self-splicing introns in the genome of bacteriophage Twort: introns in multiple genes, a single gene with three introns, and exon skipping by group I ribozymes

Analysis of RNA that can be labeled with GTP indicates the existence of group I introns in genes of at least three transcriptional classes in the genome of Staphylococcus aureus bacteriophage Twort. A single ORF of 142 amino acids (Orf142) is interrupted by three self-splicing group I introns, providing the first example of a phage gene with multiple intron insertions. Twort Orf142 is encoded in a message that is abundant 15-20 min after infection and is highly similar to a late gene product (Orf8) of the morphologically related Listeria phage A511. The introns in orf142 are spliced in vivo and contain all the conserved features of primary sequence and secondary structure of group I introns in subgroup IA2, which includes the introns in Escherichia coli phage T4 and the Bacillus phages beta22 and SPO1. Introns I2 and I3 in orf142 are highly similar, and their intron insertion sites are closely spaced. The presence of transcripts with a skipped exon between these introns indicates that they may fold into a single active ribozyme resulting in alternative splicing. Alternatively, the cleaved 5' exon preceding I2 may undergo trans splicing to the 3' exon that follows I3. Regardless of the detailed mechanism, these results demonstrate a new means whereby a single gene can give rise to multiple messenger RNAs.

Explosive invasion of plant mitochondria by a group I intron

Group I introns are mobile, self-splicing genetic elements found principally in organellar genomes and nuclear rRNA genes. The only group I intron known from mitochondrial genomes of vascular plants is located in the cox1 gene of Peperomia, where it is thought to have been recently acquired by lateral transfer from a fungal donor. Southern-blot surveys of 335 diverse genera of land plants now show that this intron is in fact widespread among angiosperm cox1 genes, but with an exceptionally patchy phylogenetic distribution. Four lines of evidence-the intron's highly disjunct distribution, many incongruencies between intron and organismal phylogenies, and two sources of evidence from exonic coconversion tracts-lead us to conclude that the 48 angiosperm genera found to contain this cox1 intron acquired it by 32 separate horizontal transfer events. Extrapolating to the over 13,500 genera of angiosperms, we estimate that this intron has invaded cox1 genes by cross-species horizontal transfer over 1,000 times during angiosperm evolution. This massive wave of lateral transfers is of entirely recent occurrence, perhaps triggered by some key shift in the intron's invasiveness within angiosperms.

Retrohoming of a bacterial group II intron: mobility via complete reverse splicing, independent of homologous DNA recombination

The mobile group II intron of Lactococcus lactis, Ll.LtrB, provides the opportunity to analyze the homing pathway in genetically tractable bacterial systems. Here, we show that Ll.LtrB mobility occurs by an RNA-based retrohoming mechanism in both Escherichia coli and L. lactis. Surprisingly, retrohoming occurs efficiently in the absence of RecA function, with a relaxed requirement for flanking exon homology and without coconversion of exon markers. These results lead to a model for bacterial retrohoming in which the intron integrates into recipient DNA by complete reverse splicing and serves as the template for cDNA synthesis. The retrohoming reaction is completed in unprecedented fashion by a DNA repair event that is independent of homologous recombination between the alleles. Thus, Ll.LtrB has many features of retrotransposons, with practical and evolutionary implications.

Structure and activity of the mitochondrial intron-encoded endonuclease, I-SceIV

Starting with crude yeast mitochondria, the intron homing endonuclease, I-SecIV, was purified to near homogeneity. This highly purified enzyme differs from some other well-characterized yeast mitochondrial intron-encoded endonucleases in terms of its structure and DNA cleavage specificity. The enzyme is a heterodimer with a native molecular mass of 92 kDa. A small catalytic subunit (32 kDa) is probably encoded largely or entirely by intron 5 alpha of the cytochrome oxidase subunit I gene. A larger polypeptide subunit (60 kDa) may be a nuclear factor necessary for intron mobility. I-SceIV exhibits a low DNA sequence specificity as it cleaves a variety of DNA substrates. Analysis of kinetic parameters shows that the purified enzyme has a very high affinity for DNA and exhibits low turnover which may have implications for subsequent steps in the intron homing process.

Introns and intein coding sequence in the ribonucleotide reductase genes of Bacillus subtilis temperate bacteriophage SPbeta

The two putative ribonucleotide reductase subunits of the Bacillus subtilis bacteriophage SPbeta are encoded by the bnrdE and bnrdF genes that are highly similar to corresponding host paralogs, located on the opposite replication arm. In contrast to their bacterial counterparts, bnrdE and bnrdF each are interrupted by a group I intron, efficiently removed in vivo by mRNA processing. The bnrdF intron contains an ORF encoding a polypeptide similar to homing endonucleases responsible for intron mobility, whereas the bnrdE intron has no obvious trace of coding sequence. The downstream bnrdE exon harbors an intervening sequence not excised at the level of the primary transcript, which encodes an in-frame polypeptide displaying all the features of an intein. Presently, this is the only intein identified in bacteriophages. In addition, bnrdE provides an example of a group I intron and an intein coding sequence within the same gene.

A phage T4 site-specific endonuclease, SegE, is responsible for a non-reciprocal genetic exchange between T-even-related phages

The bacteriophage T4 segE gene encoding site-specific endonuclease lies between the hoc.1 and uvsW genes. The similar region of T-even-related phage RB30 lacks the segE gene. Here we demonstrate that the phage T4 segE gene is inherited preferably by progeny of mixed infection with RB30. The preferred inheritance of the segE gene depends on its own expression and is based on a non-reciprocal homologous recombination event providing the transfer of the gene from the segE-containing to the segE-lacking allele. The SegE endonuclease cleaves DNA in a site located at the 5' end of the uvsW gene in the RB30 genome. The T4 DNA is also cleaved by the enzyme, but less efficiently. The cleavage at the RB30 site appears to initiate the observed conversion, which is stimulated by DNA homology and accompanied by co-conversion of flanking markers. Our findings provide a novel example of endonuclease-dependent generation of genetic variation in prokaryotes.

Compilation and analysis of intein sequences

We have compiled a list of all the inteins (protein splicing elements) whose sequences have been published or were available from on-line sequence databases as of September 18, 1996. Analysis of the 36 available intein sequences refines the previously described intein motifs and reveals the presence of another intein motif, Block H. Furthermore, analysis of the new inteins reshapes our view of the conserved splice junction residues, since three inteins lack the intein penultimate His seen in prior examples. Comparison of intein sequences suggests that, in general, (i) inteins present in the same location within extein homologs from different organisms are very closely related to each other in paired sequence comparison or phylogenetic analysis and we suggest that they should be considered intein alleles; (ii) multiple inteins present in the same gene are no more similar to each other than to inteins present in different genes; (iii) phylogenetic analysis indicates that inteins are so divergent that trees with statistically significant branches cannot be generated except for intein alleles.

Double strand break-induced recombination in Chlamydomonas reinhardtii chloroplasts

The mechanisms of chloroplast recombination are largely unknown. Using the chloroplast-encoded homing endonuclease I-CreI from Chlamydomonas reinhardtii, an experimental system is described that allows the study of double strand break (DSB)-induced recombination in chloroplasts. The I-CreI endonuclease is encoded by the chloroplast ribosomal group I intron of C.reinhardtii and cleaves specifically intronless copies of the large ribosomal RNA (23S) gene. To study DSB-induced recombination in chloroplast DNA, the genes encoding the I-CreI endonuclease were deleted and a target site for I-CreI, embedded in a cDNA of the 23S gene, was integrated at an ectopic location. Endonuclease function was transiently provided by mating the strains containing the recombination substrate to a wild-type strain. The outcome of DSB repair was analyzed in haploid progeny of these crosses. Interestingly, resolution of DSB repair strictly depended upon the relative orientation of the ectopic ribosomal cDNA and the adjacent copy of the 23S gene. Gene conversion was observed when the 23S cDNA and the neighbouring copy of the 23S gene were in opposite orientation, leading to mobilization of the intron to the 23S cDNA. In contrast, arrangement of the 23S cDNA in direct repeat orientation relative to the proximal 23S gene resulted in a deletion between the 23S cDNA and the 23S gene. These results demonstrate that C.reinhardtii chloroplasts have an efficient system for DSB repair and that homologous recombination is strongly stimulated by DSBs in chloroplast DNA.

Intron mobility in phage T4 occurs in the context of recombination-dependent DNA replication by way of multiple pathways

Numerous group I introns in both prokaryotes and eukaryotes behave as mobile genetic elements. The functional requirements for intron mobility were determined in the T4 phage system using an in vivo assay to measure intron homing with wild-type and mutant derivatives. Thus, it was demonstrated that intron mobility occurs in the context of phage recombination-dependent replication, a pathway that uses overlapping subsets of replication and recombination functions. The functional requirements for intron homing and the nature of recombinant products are only partially consistent with the accepted double-strand-break repair (DSBR) model for intron inheritance, and implicate additional homing pathways. Whereas ambiguities in resolvase requirements and underrepresentation of crossover recombination products are difficult to rationalize strictly by DSBR, these properties are most readily consistent with a synthesis-dependent strand annealing (SDSA) pathway. These pathways share common features in the strand invasion steps, but differ in subsequent repair synthesis and resolution steps, influencing the genetic consequences of the intron transfer event.

Recombination apparatus of T4 phage

The substantial process of general DNA recombination consists of production of ssDNA, exchange of the ssDNA and its homologous strand in a duplex, and cleavage of branched DNA to maturate recombination intermediates. Ten genes of T4 phage are involved in general recombination and apparently encode all of the proteins required for its own recombination. Several proteins among them interact with each other in a highly specific manner based on a protein-protein affinity and constitute a multicomponent protein machine to create an ssDNA gap essential for production of recombinogenic ssDNA, a machine to supply recombinogenic ssDNA which has a free end, or a machine to transfer the recombinogenic single strand into a homologous duplex.

Evolution of mobile group I introns: recognition of intron sequences by an intron-encoded endonuclease

Mobile group I introns are hypothesized to have arisen after invasion by endonuclease-encoding open reading frames (ORFs), which mediate their mobility. Consistent with an endonuclease-ORF invasion event, we report similarity between exon junction sequences (the recognition site for the mobility endonuclease) and intron sequences flanking the endonuclease ORF in the sunY gene of phage T4. Furthermore, we have demonstrated the ability of the intron-encoded endonuclease to recognize and cleave these intron sequences when present in fused form in synthetic constructs. These observations and accompanying splicing data are consistent with models in which the invading endonuclease ORF is provided safe haven within a splicing element. In turn the intron is afforded immunity to the endonuclease product, which imparts mobility to the intron.

Interspecific transfer of mitochondrial genes in fungi and creation of a homologous hybrid gene

In eukaryotes, horizontal gene transfer is a rare event. Here we show that the mitochondrial genome of a lower fungus, Allomyces macrogynus, has an extra DNA segment not present in a close relative, Allomyces arbusculus. This insert consists of the C terminus of a foreign gene encoding a subunit of the ATP synthetase complex (atp6) plus an open reading frame encoding an endonuclease. The inserted atp6 portion is fused in phase to the resident gene, resulting in expression of a hybrid atp6 gene and the displacement of the original C-terminal atp6 region. We present evidence that this insertion may have been acquired by interspecific transfer and we discuss the possible role of the endonuclease in this process.

An intron in the thymidylate synthase gene of Bacillus bacteriophage beta 22: evidence for independent evolution of a gene, its group I intron, and the intron open reading frame

The thymidylate synthase gene (thy) (EC 2.1.1.45) of Bacillus subtilis bacteriophage beta 22 has a self-splicing, group I intron inserted into a highly conserved region of the coding sequence. The intron is very similar to one that is inserted 21 bp further downstream in the homologous thymidylate synthase gene (td) of Escherichia coli bacteriophage T4. In contrast, the amino acid sequences of the bacteriophage thymidylate synthases are highly divergent. The beta 22 intron has a fragmentary open reading frame (ORF) that encodes a putative helix-turn-helix DNA-binding motif, similar to one at the carboxyl terminus of the homing endonuclease (I-TevI) encoded by the T4 td intron. The td ORF and the thy ORF fragments are inserted into different regions of their respective intron structures. These results suggest that the thymidylate synthase genes, their introns, and their respective intron-ORFs all have separate evolutionary histories and that the acquisition of the intron could not have occurred by a simple homing event.

Self-splicing group I introns in eukaryotic viruses

We report the occurrence of self-splicing group I introns in viruses that infect the eukaryotic green alga Chlorella. The introns contained all the conserved features of primary sequence and secondary structure previously described for the group IB introns. The Chlorella viral introns (approximately 400 nt) self-spliced in vitro, yielding the typical group I intron splicing intermediates and products. Contrasting to eukaryotic nuclear group I introns, all of which are located in the rRNA genes, these introns were inserted in genes encoding proteins. In one case, the exons encoded a protein showing significant homology to the eukaryotic transcription factor SII (TFIIS), which may be important for viral gene expression. In another case, the gene for the open reading frame (ORF) of a 14.2 kDa polypeptide with unknown functions contained the intron. Scattered distribution of these introns among the viral species and their structural similarity to the group I introns of algae and protists indicated horizontal intron transmission. These eukaryotic viral introns offer an opportunity to understand how group I introns reach organisms of different phylogenetic kingdoms.

Escherichia coli proteins, including ribosomal protein S12, facilitate in vitro splicing of phage T4 introns by acting as RNA chaperones

To address the effect of host proteins on the self-splicing properties of the group I introns of bacteriophage T4, we have purified an activity from Escherichia coli extracts that facilitates both trans- and cis-splicing of the T4 introns in vitro. The activity is attributable to a number of proteins, several of which are ribosomal proteins. Although these proteins have variable abilities to stimulate splicing, ribosomal protein S12 is the most effective. The activity mitigates the negative effects on splicing of the large internal open reading frames (ORFs) common to the T4 introns. In contrast to proteins shown previously to facilitate group I splicing, S12 does not bind strongly or specifically to the intron. Rather, S12 binds RNA with broad specificity and can also facilitate the action of a hammerhead ribozyme. Addition of S12 to unreactive trans-splicing precursors promoted splicing, suggesting that S12 can resolve misfolded RNAs. Furthermore, incubation with S12 followed by its proteolytic removal prior to the initiation of the splicing reaction still resulted in splicing enhancement. These results suggest that this protein facilitates splicing by acting as an RNA chaperone, promoting the assembly of the catalytically active tertiary structure of ribozymes.

Interaction of the intron-encoded mobility endonuclease I-PpoI with its target site

Endonucleases encoded by mobile group I introns are highly specific DNases that induce a double-strand break near the site to which the intron moves. I-PpoI from the acellular slime mold Physarum polycephalum mediates the mobility of intron 3 (Pp LSU 3) in the extrachromosomal nuclear ribosomal DNA of this organism. We showed previously that cleavage by I-PpoI creates a four-base staggered cut near the point of intron insertion. We have now characterized several further properties of the endonuclease. As determined by deletion analysis, the minimal target site recognized by I-PopI was a sequence of 13 to 15 bp spanning the cleavage site. The purified protein behaved as a globular dimer in sedimentation and gel filtration. In gel mobility shift assays in the presence of EDTA, I-PpoI formed a stable and specific complex with DNA, dissociating with a half-life of 45 min. By footprinting and interference assays with methidiumpropyl-EDTA-iron(II), I-PpoI contacted a 22- to 24-bp stretch of DNA. The endonuclease protected most of the purines found in both the major and minor grooves of the DNA helix from modification by dimethyl sulfate (DMS). However, the reactivity to DMS was enhanced at some purines, suggesting that binding leads to a conformational change in the DNA. The pattern of DMS protection differed fundamentally in the two partially symmetrical halves of the recognition sequence.

Interaction of the intron-encoded mobility endonuclease I-PpoI with its target site

Endonucleases encoded by mobile group I introns are highly specific DNases that induce a double-strand break near the site to which the intron moves. I-PpoI from the acellular slime mold Physarum polycephalum mediates the mobility of intron 3 (Pp LSU 3) in the extrachromosomal nuclear ribosomal DNA of this organism. We showed previously that cleavage by I-PpoI creates a four-base staggered cut near the point of intron insertion. We have now characterized several further properties of the endonuclease. As determined by deletion analysis, the minimal target site recognized by I-PopI was a sequence of 13 to 15 bp spanning the cleavage site. The purified protein behaved as a globular dimer in sedimentation and gel filtration. In gel mobility shift assays in the presence of EDTA, I-PpoI formed a stable and specific complex with DNA, dissociating with a half-life of 45 min. By footprinting and interference assays with methidiumpropyl-EDTA-iron(II), I-PpoI contacted a 22- to 24-bp stretch of DNA. The endonuclease protected most of the purines found in both the major and minor grooves of the DNA helix from modification by dimethyl sulfate (DMS). However, the reactivity to DMS was enhanced at some purines, suggesting that binding leads to a conformational change in the DNA. The pattern of DMS protection differed fundamentally in the two partially symmetrical halves of the recognition sequence.