In vitro contact phase activation with haemodialysis membranes: role of pharmaceutical agents

In vitro Blood Compatibility Evaluation of Hollow Fibre Membrane Using a Controlled Flow System: A Comparative Study

A procedure has been established for the in vitro assessment of hollow fibre haemodialysis membranes. A 30 ml syringe containing 20 ml of fresh non-anticoagulated blood was mounted onto a non-pulsatile syringe pump and blood was perfused through minimodules constructed from 80 fibres retrieved from Cuprophan (Baxter ST15), cellulose acetate (M57-12, JMS Co Ltd, Hiroshima, Japan), and AN69HF (Filtral 20, Hospal, France) dialysers. Samples were collected before perfusion, 3, 6, 9 and 12 minutes. The modules were clamped vertically to minimise the effect of red cell pooling and the dialysate compartment was filled with 0.9% saline to minimise ultrafiltration. After sample processing, complement C3a, thrombin-antithrombin III complexes, prothrombin F1 + 2, and factor XII-like activity were evaluated. The results indicated that the system could discriminate between the membranes evaluated and therefore was a relevant procedure for the assessment of hollow fibre haemodialysis membranes.

Inhibition of Factors XI and XII for Prevention of Thrombosis Induced by Artificial Surfaces

Exposure of blood to a variety of artificial surface induces contact activation, a process that contributes to the host innate response to foreign substances. On the foreign surface, the contact factors, factor XII (FXII), and plasma prekallikrein undergo reciprocal conversion to their fully active protease forms (FXIIa and α-kallikrein, respectively) by a process supported by the cofactor high-molecular-weight kininogen. Contact activation can trigger blood coagulation by conversion of factor XI (FXI) to the protease FXIa. There is interest in developing therapeutic inhibitors to FXIa and FXIIa because these activated factors can contribute to thrombosis in certain situations. Drugs targeting these proteases may be particularly effective in thrombosis triggered by exposure of blood to the surfaces of implantable medical devices. Here, we review clinical data supporting roles for FXII and FXI in thrombosis induced by medical devices, and preclinical data suggesting that therapeutic targeting of these proteins may limit surface-induced thrombosis.

Polymers in nephrology. Characteristics and needs

Polymers employed as biomaterials in nephrology serve for different applications: they form membranes for dialysis and plasmapheresis, are used as materials for dialyser housings and as a potting mass for capillary membranes, they make up tubing-systems for extracorporeal circuits and - in the form of beads - act as parts of adsorber columns for hemoperfusion or immunoadsorption. However, generally speaking, many polymers have not yet been designed for their final application. To date, many polymers are still taken from the chemist's shelf according to their alleged performance properties or to their sterilisability. When used in medical application, polymers must show a high purity. Uncontrolled leaching of oligomers from the polymer backbone or of additives from or during the manufacturing process must be avoided. Blood and other body fluids are extremely effective in extracting any loosely bound polymers. During long-term application, e.g. in patients suffering from chronic diseases, these effects may lead to an accumulation of these compounds in circulating blood, tissue, or joints. Consequently, polymers should show an excellent biostability and not degrade during their ageing process. The amount of extractable material should be kept low in order to avoid inflammatory reactions. Polymers must have high blood compatibility in terms of minimized cell- and complement activation. Polymers for medical application should at best be able to stand high temperatures in order to survive steam sterilisation. If this is impossible, their release kinetics for residual quantities of sterilizing agents should be fast. Finally, protein adsorption should appear under controlled conditions, otherwise a reduced performance through protein adsorption will take place. Further, the uncontrolled activation of biochemical cascades, such as the coagulation, complement or contact phase cascade, following blood/material contact must be minimized. A final aspect has been recently made responsible for adverse patients reactions, the interaction between polymers and medicinal drugs. This drug/material interaction must be low, at best zero, apart form those situations, where a controlled drug-release is wanted. The chemical variety of polymers for medical application is large. However, all typical requirements cannot be met by one single polymer. Compromises have to be found between properties and application. Polymer selection for application in nephrology has always to be made under the premise of final application.

Role of contact system activation in hemodialyzer-induced thrombogenicity

BACKGROUND

The contact system is generally believed to be the main trigger of the coagulation cascade during extracorporeal circulation. However, the extent of contact activation, its role for intradialytic thrombin generation as well as the influence of different dialyzer membranes have not been well established.

METHODS

In a novel full-scale ex vivo recirculation dialysis model, we investigated the thrombogenicity of three widely used hemodialyzers (Cuprophan Renak RA15-U, Polysulfone F6HPS and AN69XT Nephral 200). The activation of the contact system was evaluated using a newly developed ELISA for factor XIIa-C1-inhibitor complexes. Additionally, we determined free FXIIa (ELISA), thrombin-antithrombin (TAT) complexes, platelet factor 4 (PF4), complement activation (C5a), granulocyte elastase and blood cell counts. The findings in blood from normal volunteers were compared with factor XII-deficient blood.

RESULTS

With normal blood AN69 exhibited the highest thrombogenicity in comparison to Cuprophan and Polysulfone, as assessed by TAT generation and platelet consumption. AN69 caused a rapid increase of the FXIIa-C1-inhibitor complexes and of free FXIIa. Despite significant TAT generation with Cuprophan and Polysulfone free FXIIa remained unchanged and the FXIIa-C1-inhibitor complexes stayed below the detection limit. With factor XII-deficient blood Polysulfone exhibited the same TAT generation, whereas the thrombogenicity of AN69 was greatly reduced.

CONCLUSIONS

Our data challenge the common assumption that activation of the contact system with generation of FXIIa is the main trigger for coagulation and thrombus formation in hemodialysis. Only the negatively charged AN69 membrane with enhanced thrombogenicity strongly induced contact activation.

In vitro investigation of the blood response to medical grade PVC and the effect of heparin on the blood response

This paper reports the results of an investigation into the blood response of polymers in vitro, using non-anticoagulated and heparinised blood and plasma. The materials studied were regenerated cellulose, (Cuprophan), an acrylonitrile-allyl sulphonate copolymer (AN69S), and medical grade polyvinyl chloride plasticised with di-2-ethyl-hexyl-phthalate (PVC/DEHP). Blood-material or plasma-material contact was achieved using a parallel plate flow cell, and C3a generation and FXII-like activity measured. The results of the study with non-anticoagulated human blood show that PVC/DEHP is a high complement activator. C3a concentration in the blood was higher after contact with PVC/DEHP than after contact with regenerated cellulose. The introduction of heparin in the blood induced complex alterations in the blood response. C3a generation could be elevated, decreased, or remain the same, depending on the material. The FXII-like activity on the surface of the PVC/DEHP after contact with plasma was also higher than the other two polymers. The introduction of heparin could increase or decrease FXII-like activity, depending on material. The patterns of response obtained with non-anticoagulated blood in vitro for AN69S and Cuprophan bore a strong resemblance with patterns of response obtained in the clinic, whereas those obtained with heparinised blood in vitro did not.

Blood compatibility of surfaces with immobilized albumin-heparin conjugate and effect of endothelial cell seeding on platelet adhesion

Endothelial cell (EC) seeding significantly improves the blood compatibility of artificial surfaces. Although a coating consisting of albumin and heparin (alb-hep) is a suitable substrate for seeded ECs, binding of ECs to the substrate further improves when small amounts of fibronectin are present in the alb-hep coating. Alb-hep conjugate was immobilized on carbon dioxide gas plasma-treated polystyrene (PS-CO(2)), thereby significantly increasing the recalcification time of blood plasma exposed to this surface. Furthermore, surface-immobilized alb-hep conjugate inhibited exogenous thrombin. Heparin activity was reduced by adding fibronectin on top of a monolayer of alb-hep conjugate, but not by simultaneous coating of fibronectin and alb-hep conjugate. Coating of PS-CO(2) with alb-hep conjugate significantly decreased contact activation (FXII activation). The number of platelets deposited from blood plasma on PS-CO(2) coated with alb-hep conjugate was twice as high as on PS-CO(2) coated with albumin. Addition of fibronectin to alb-hep conjugate-coated PS-CO(2) had no significant effect on the number of adhered platelets. Seeding of the substrates with ECs significantly reduced the number of adhered platelets under stationary conditions. Platelets deposited onto endothelialized surfaces were primarily found on endothelial cell edges, and sparingly on areas between ECs. In conclusion, alb-hep conjugate-coated surfaces display anticoagulant activity. ECs adhering to and proliferating on this coating significantly decrease the number of platelets which adhere to the surface. Therefore, alb-hep conjugate-coated surfaces form a suitable substrate for seeding of ECs in low density. Although application of fibronectin on top of the coating decreases the anticoagulant activity to some extent, it might be useful in view of the improved adherence of ECs to the coating.

The influence of biomaterials on inflammatory responses to cardiopulmonary bypass

The nature of cardiopulmonary bypass and the complexity of the inflammatory response make the detection and interpretation of a biomaterial influence difficult. However, if mediation of the inflammatory response is considered to be an appropriate clinical goal, alteration to the biomaterial influence merits further investigation.