Microcapsules through polymer complexation. Part 3: Encapsulation and culture of human Burkitt lymphoma cells in vitro

Technology of mammalian cell encapsulation

Entrapment of mammalian cells in physical membranes has been practiced since the early 1950s when it was originally introduced as a basic research tool. The method has since been developed based on the promise of its therapeutic usefulness in tissue transplantation. Encapsulation physically isolates a cell mass from an outside environment and aims to maintain normal cellular physiology within a desired permeability barrier. Numerous encapsulation techniques have been developed over the years. These techniques are generally classified as microencapsulation (involving small spherical vehicles and conformally coated tissues) and macroencapsulation (involving larger flat-sheet and hollow-fiber membranes). This review is intended to summarize techniques of cell encapsulation as well as methods for evaluating the performance of encapsulated cells. The techniques reviewed include microencapsulation with polyelectrolyte complexation emphasizing alginate-polylysine capsules, thermoreversible gelation with agarose as a prototype system, interfacial precipitation and interfacial polymerization, as well as the technology of flat sheet and hollow fiber-based macroencapsulation. Four aspects of encapsulated cells that are critical for the success of the technology, namely the capsule permeability, mechanical properties, immune protection and biocompatibility, have been singled out and methods to evaluate these properties were summarized. Finally, speculations regarding future directions of cell encapsulation research and device development are included from the authors' perspective.

Synthetic strategies for the preparation of precursor polymers and of microcapsules suitable for cellular entrapment by polyelectrolyte complexation of those polymers

The production of microcapsules suitable for the entrapment of mammalian cell by means of polyelectrolyte complexation has, of a necessity, led to the development of novel strategies for the preparation of relatively bioinert polymers which complex efficiently under unique conditions to produce a mechanically resilient membrane with efficient transport properties. In this communication we relate a brief overview of capsule-membrane forming systems for the immunoisolation (or potential immunoisolation) of mammalian cells, which are based upon the complexation of polyelectrolyte (PE) polymers; with emphasis on precursor synthesis and relationships between precursor polymer structure and capsule membrane stability.

Effect of water vapor pressure and temperature on the amorphous-to-crystalline HA conversion during heat treatment of HA coatings

X-ray diffraction was used to characterize the increment of crystallinity of HA coatings after heat treatment. Coatings were heated over the temperature (T) interval of 300 degrees-460 degrees C with a partial water vapor pressure of 0.01 MPa and 0.001 MPa. Heat treatment also was done in air, as a contrast. It was found that the ratio (n) of the increment of crystallinity to the crystallinity of the as-received HA coatings was more significant for the coatings heated in atmosphere with water vapor than for those heated in air. This ratio also increased with water vapor pressure. The logarithm of the ratio increased linearly with 1/T, indicating that the ratio is exponential to T. The reason might be that recrystallization of the amorphous phase is a diffusion controlled process; the nucleation rate and growth velocity of the crystallites are in proportion to the diffusion coefficient, which is exponential to the temperature (T). Incorporation of water vapor in the atmosphere during heat treatment may decrease the activation energy for diffusion, which helps raise the diffusion coefficient of the atoms. Thus recrystallization of the amorphous phase can be accelerated.