A review of mini-F plasmid maintenance

Real-time visualisation of the intracellular dynamics of conjugative plasmid transfer

Conjugation is a contact-dependent mechanism for the transfer of plasmid DNA between bacterial cells, which contributes to the dissemination of antibiotic resistance. Here, we use live-cell microscopy to visualise the intracellular dynamics of conjugative transfer of F-plasmid in E. coli, in real time. We show that the transfer of plasmid in single-stranded form (ssDNA) and its subsequent conversion into double-stranded DNA (dsDNA) are fast and efficient processes that occur with specific timing and subcellular localisation. Notably, the ssDNA-to-dsDNA conversion determines the timing of plasmid-encoded protein production. The leading region that first enters the recipient cell carries single-stranded promoters that allow the early and transient synthesis of leading proteins immediately upon entry of the ssDNA plasmid. The subsequent conversion into dsDNA turns off leading gene expression, and activates the expression of other plasmid genes under the control of conventional double-stranded promoters. This molecular strategy allows for the timely production of factors sequentially involved in establishing, maintaining and disseminating the plasmid.

Virotyping and genetic antimicrobial susceptibility testing of porcine ETEC/STEC strains and associated plasmid types

Introduction

Enterotoxigenic Escherichia coli (ETEC) infections are the most common cause of secretory diarrhea in suckling and post-weaning piglets. For the latter, Shiga toxin-producing Escherichia coli (STEC) also cause edema disease. This pathogen leads to significant economic losses. ETEC/STEC strains can be distinguished from general E. coli by the presence of different host colonization factors (e.g., F4 and F18 fimbriae) and various toxins (e.g., LT, Stx2e, STa, STb, EAST-1). Increased resistance against a wide variety of antimicrobial drugs, such as paromomycin, trimethoprim, and tetracyclines, has been observed. Nowadays, diagnosing an ETEC/STEC infection requires culture-dependent antimicrobial susceptibility testing (AST) and multiplex PCRs, which are costly and time-consuming.

Methods

Here, nanopore sequencing was used on 94 field isolates to assess the predictive power, using the meta R package to determine sensitivity and specificity and associated credibility intervals of genotypes associated with virulence and AMR.

Results

Genetic markers associated with resistance for amoxicillin (plasmid-encoded TEM genes), cephalosporins (ampC promoter mutations), colistin (mcr genes), aminoglycosides (aac(3) and aph(3) genes), florfenicol (floR), tetracyclines (tet genes), and trimethoprim-sulfa (dfrA genes) could explain most acquired resistance phenotypes. Most of the genes were plasmid-encoded, of which some collocated on a multi-resistance plasmid (12 genes against 4 antimicrobial classes). For fluoroquinolones, AMR was addressed by point mutations within the ParC and GyrA proteins and the qnrS1 gene. In addition, long-read data allowed to study the genetic landscape of virulence- and AMR-carrying plasmids, highlighting a complex interplay of multi-replicon plasmids with varying host ranges.

Conclusion

Our results showed promising sensitivity and specificity for the detection of all common virulence factors and most resistance genotypes. The use of the identified genetic hallmarks will contribute to the simultaneous identification, pathotyping, and genetic AST within a single diagnostic test. This will revolutionize future quicker and more cost-efficient (meta)genomics-driven diagnostics in veterinary medicine and contribute to epidemiological studies, monitoring, tailored vaccination, and management.

Discovery of small-molecule inhibitors of multidrug-resistance plasmid maintenance using a high-throughput screening approach

Carbapenem-resistant Enterobacteriaceae (CRE) are multidrug-resistant pathogens for which new treatments are desperately needed. Carbapenemases and other types of antibiotic resistance genes are carried almost exclusively on large, low-copy-number plasmids (pCRE). Accordingly, small molecules that efficiently evict pCRE plasmids should restore much-needed treatment options. We therefore designed a high-throughput screen to identify such compounds. A synthetic plasmid was constructed containing the plasmid replication machinery from a representative Escherichia coli CRE isolate as well as a fluorescent reporter gene to easily monitor plasmid maintenance. The synthetic plasmid was then introduced into an E. coli K12 tolC host. We used this screening strain to test a library of over 12,000 known bioactive agents for molecules that selectively reduce plasmid levels relative to effects on bacterial growth. From 366 screen hits we further validated the antiplasmid activity of kasugamycin, an aminoglycoside; CGS 15943, a nucleoside analog; and Ro 90-7501, a bibenzimidazole. All three compounds exhibited significant antiplasmid activity including up to complete suppression of plasmid replication and/or plasmid eviction in multiple orthogonal readouts and potentiated activity of the carbapenem, meropenem, against a strain carrying the large, pCRE plasmid from which we constructed the synthetic screening plasmid. Additionally, we found kasugamycin and CGS 15943 blocked plasmid replication, respectively, by inhibiting expression or function of the plasmid replication initiation protein, RepE. In summary, we validated our approach to identify compounds that alter plasmid maintenance, confer resensitization to antimicrobials, and have specific mechanisms of action.

Structural analysis of a replication protein encoded by a plasmid isolated from a multiple sclerosis patient

Bovine meat and milk factors (BMMFs) are circular, single-stranded episomal DNAs that have been detected in bovine meat and milk products. BMMFs are thought to have roles in human malignant and degenerative diseases. BMMFs encode a replication initiator protein (Rep) that is actively transcribed and translated in human cells. In this study, a Rep WH1 domain encoded on a BMMF (MSBI1.176) isolated from a multiple sclerosis human brain sample was determined to 1.53 Å resolution using X-ray crystallography. The overall structure of the MSBI1.176 WH1 domain was remarkably similar to other Rep structures, despite having a low (28%) amino-acid sequence identity. The MSBI1.176 WH1 domain contained elements common to other Reps, including five α-helices, five β-strands and a hydrophobic pocket. These new findings suggest that the MSBI1.176 Rep might have comparable roles and functions to other known Reps of different origins.

Transmission and persistence of IncF conjugative plasmids in the gut microbiota of full-term infants

Conjugative plasmids represent major reservoirs for horizontal transmission of antibiotic resistance and virulence genes. Our knowledge about the ecology and persistence of these plasmids in the gut microbiota remains limited. The IncF plasmids are the most widespread in clinical samples and in healthy humans and the main aim of this work was to study their ecology and association with the developing gut microbiota. Using a longitudinal (2, 10, 30 and 90 days) cohort of full-term infants, we investigated the transmission and persistence of IncFIA and IncFIB plasmids. The prevalence of IncFIB plasmids was higher than IncFIA in the cohort, while IncFIA always co-occurred with IncFIB. However, the relative gene abundance of IncFIA was significantly higher than IncFIB for all time points, indicating that IncFIA may be a higher copy-number plasmid. Through linear discriminant analysis effect size and operational taxonomic unit-level associations, we observed major differences in the abundance of Enterobacteriaceae in samples positive and negative for IncFIB. This association was significant at 2, 10 and 30 days and showed an association with vaginal delivery. From shot-gun analyses, we assembled de novo multi-replicon shared (IncFIA/IncFIB) and integrated (IncFIA/IB) plasmids that were persistent through the dataset. Overall, the study demonstrates the nature of IncF plasmids in complex microbial communities.

Customizable Cloning of Whole Polysaccharide Gene Clusters by Yeast Homologous Recombination

Cloning of whole polysaccharide biosynthesis gene clusters for expression in a common Escherichia coli tester strain has the major advantage of enabling direct functional comparisons between gene clusters that are normally found in different strains, where their expression is potentially under differential regulatory control. However, due to the large size of many of these gene clusters, classical cloning methods are highly inefficient, time-consuming, and/or labor-intensive. Here we describe a recently developed system, called the operon assembly protocol (OAP), in which yeast homologous recombination pathways are used to assemble overlapping PCR fragments onto a specially engineered yeast E. coli shuttle vector, resulting in full-length customizable gene cluster clones on single-copy plasmids. Multiple versions of the same gene cluster can also be assembled in parallel with genes deleted, replaced, or rearranged, allowing the function and/or specificity of individual genes to be examined. Since the vector can be easily modified to include other bacterial replicons, it can also be broadly applied to the functional analysis of a wide range of bacterial gene clusters and operons.

Wzx flippases exhibiting complex O-unit preferences require a new model for Wzx-substrate interactions

The Wzx flippase is a critical component of the O‐antigen biosynthesis pathway, being responsible for the translocation of oligosaccharide O units across the inner membrane in Gram‐negative bacteria. Recent studies have shown that Wzx has a strong preference for its cognate O unit, but the types of O‐unit structural variance that a given Wzx can accommodate are poorly understood. In this study, we identified two Yersinia pseudotuberculosis Wzx that can distinguish between different terminal dideoxyhexose sugars on a common O‐unit main‐chain, despite both being able to translocate several other structurally‐divergent O units. We also identified other Y. pseudotuberculosis Wzx that can translocate a structurally divergent foreign O unit with high efficiency, and thus exhibit an apparently relaxed substrate preference. It now appears that Wzx substrate preference is more complex than previously suggested, and that not all O‐unit residues are equally important determinants of translocation efficiency. We propose a new “Structure‐Specific Triggering” model in which Wzx translocation proceeds at a low level for a wide variety of substrates, with high‐frequency translocation only being triggered by Wzx interacting with one or more preferred O‐unit structural elements found on its cognate O unit(s).

Fate and Persistence of a Pathogenic NDM-1-Positive Escherichia coli Strain in Anaerobic and Aerobic Sludge Microcosms

The presence of emerging biological pollutants in treated wastewater effluents has gained attention due to increased interest in water reuse. To evaluate the effectiveness of the removal of such contaminants by the conventional wastewater treatment process, the fate and decay kinetics of NDM-1-positive Escherichia coli strain PI7 and its plasmid-encoded antibiotic resistance genes (ARGs) were assessed in microcosms of anaerobic and aerobic sludge. Results showed that E. coli PI7 decayed at a significantly lower rate under anaerobic conditions. Approximate half-lives were 32.4 ± 1.4 h and 5.9 ± 0.9 h in the anaerobic and aerobic microcosms, respectively. In the aerobic microcosms, after 72 h of operation, E. coli PI7 remained detectable, but no further decay was observed. Instead, 1 in every 10,000 E. coli cells was identified to be recalcitrant to decay and persist indefinitely in the sludge. ARGs associated with the E. coli PI7 strain were detected to have transferred to other native microorganisms in the sludge or were released to the liquid fraction upon host decay. Extracellular DNA quickly degraded in the liquid fraction of the aerobic sludge. In contrast, no DNA decay was detected in the anaerobic sludge water matrix throughout the 24-h sampling period. This study suggests an increased likelihood of environmental dispersion of ARGs associated with anaerobically treated wastewater effluents and highlights the potential importance of persister cells in the dissemination of E. coli in the environment during reuse events of treated wastewater.

IMPORTANCE This study examines the decay kinetics of a pathogenic and antibiotic resistant strain of Escherichia coli in microcosms simulating biological treatment units of aerobic and anaerobic sludge. The results of this study point at a significantly prolonged persistence of the E. coli and the associated antibiotic resistance gene in the anaerobic sludge. However, horizontal transfer of the plasmid encoding the antibiotic resistance gene was detected in the aerobic sludge by a cultivation method. A subpopulation of persister E. coli cells was also detected in the aerobic sludge. The findings of this study suggest potential areas of concern arising from pathogenic and antibiotic-resistant E. coli during both anaerobic and aerobic sludge treatment processes.

Stabilization of the Virulence Plasmid pSLT of Salmonella Typhimurium by Three Maintenance Systems and Its Evaluation by Using a New Stability Test

Certain Salmonella enterica serovars belonging to subspecies I carry low-copy-number virulence plasmids of variable size (50–90 kb). All of these plasmids share the spv operon, which is important for systemic infection. Virulence plasmids are present at low copy numbers. Few copies reduce metabolic burden but suppose a risk of plasmid loss during bacterial division. This drawback is counterbalanced by maintenance modules that ensure plasmid stability, including partition systems and toxin-antitoxin (TA) loci. The low-copy number virulence pSLT plasmid of Salmonella enterica serovar Typhimurium encodes three auxiliary maintenance systems: one partition system (parAB) and two TA systems (ccdAB_ST and vapBC2_ST). The TA module ccdAB_ST has previously been shown to contribute to pSLT plasmid stability and vapBC2_ST to bacterial virulence. Here we describe a novel assay to measure plasmid stability based on the selection of plasmid-free cells following elimination of plasmid-containing cells by ParE toxin, a DNA gyrase inhibitor. Using this new maintenance assay we confirmed a crucial role of parAB in pSLT maintenance. We also showed that vapBC2_ST, in addition to contribute to bacterial virulence, is important for plasmid stability. We have previously shown that ccdAB_ST encodes an inactive CcdB_ST toxin. Using our new stability assay we monitored the contribution to plasmid stability of a ccdAB_ST variant containing a single mutation (R99W) that restores the toxicity of CcdB_ST. The “activation” of CcdB_ST (R99W) did not increase pSLT stability by ccdAB_ST. In contrast, ccdAB_ST behaves as a canonical type II TA system in terms of transcriptional regulation. Of interest, ccdAB_ST was shown to control the expression of a polycistronic operon in the pSLT plasmid. Collectively, these results show that the contribution of the CcdB_ST toxin to pSLT plasmid stability may depend on its role as a co-repressor in coordination with CcdA_ST antitoxin more than on its toxic activity.

Identification of essential genes and synthetic lethal gene combinations in Escherichia coli K-12

Here we describe the systematic identification of single genes and gene pairs, whose knockout causes lethality in Escherichia coli K-12. During construction of precise single-gene knockout library of E. coli K-12, we identified 328 essential gene candidates for growth in complex (LB) medium. Upon establishment of the Keio single-gene deletion library, we undertook the development of the ASKA single-gene deletion library carrying a different antibiotic resistance. In addition, we developed tools for identification of synthetic lethal gene combinations by systematic construction of double-gene knockout mutants. We introduce these methods herein.

Molecular characterization of a multidrug resistance IncF plasmid from the globally disseminated Escherichia coli ST131 clone

Escherichia coli sequence type 131 (E. coli ST131) is a recently emerged and globally disseminated multidrug resistant clone associated with urinary tract and bloodstream infections. Plasmids represent a major vehicle for the carriage of antibiotic resistance genes in E. coli ST131. In this study, we determined the complete sequence and performed a comprehensive annotation of pEC958, an IncF plasmid from the E. coli ST131 reference strain EC958. Plasmid pEC958 is 135.6 kb in size, harbours two replicons (RepFIA and RepFII) and contains 12 antibiotic resistance genes (including the bla_CTX-M-15 gene). We also carried out hyper-saturated transposon mutagenesis and multiplexed transposon directed insertion-site sequencing (TraDIS) to investigate the biology of pEC958. TraDIS data showed that while only the RepFII replicon was required for pEC958 replication, the RepFIA replicon contains genes essential for its partitioning. Thus, our data provides direct evidence that the RepFIA and RepFII replicons in pEC958 cooperate to ensure their stable inheritance. The gene encoding the antitoxin component (ccdA) of the post-segregational killing system CcdAB was also protected from mutagenesis, demonstrating this system is active. Sequence comparison with a global collection of ST131 strains suggest that IncF represents the most common type of plasmid in this clone, and underscores the need to understand its evolution and contribution to the spread of antibiotic resistance genes in E. coli ST131.

Recombination-based DNA assembly and mutagenesis methods for metabolic engineering

In recent years there has been a growing interest in the precise and concerted assembly of multiple DNA fragments of diverse sizes, including chromosomes, and the fine tuning of gene expression levels and protein activity. Commercial DNA assembly solutions have not been conceived to support the cloning of very large or very small genetic elements or a combination of both. Here we summarize a series of protocols that allow the seamless, simultaneous, flexible, and highly efficient assembly of DNA elements of a wide range of sizes (up to hundred thousand base pairs). The protocols harness the power of homologous recombination and are performed either in vitro or within the living cells. The DNA fragments may or may not share homology at their ends. An efficient site-directed mutagenesis protocol enhanced by homologous recombination is also described.

Homologous Recombination-Experimental Systems, Analysis, and Significance

Homologous recombination is the most complex of all recombination events that shape genomes and produce material for evolution. Homologous recombination events are exchanges between DNA molecules in the lengthy regions of shared identity, catalyzed by a group of dedicated enzymes. There is a variety of experimental systems in Escherichia coli and Salmonella to detect homologous recombination events of several different kinds. Genetic analysis of homologous recombination reveals three separate phases of this process: pre-synapsis (the early phase), synapsis (homologous strand exchange), and post-synapsis (the late phase). In E. coli, there are at least two independent pathway of the early phase and at least two independent pathways of the late phase. All this complexity is incongruent with the originally ascribed role of homologous recombination as accelerator of genome evolution: there is simply not enough duplication and repetition in enterobacterial genomes for homologous recombination to have a detectable evolutionary role and therefore not enough selection to maintain such a complexity. At the same time, the mechanisms of homologous recombination are uniquely suited for repair of complex DNA lesions called chromosomal lesions. In fact, the two major classes of chromosomal lesions are recognized and processed by the two individual pathways at the early phase of homologous recombination. It follows, therefore, that homologous recombination events are occasional reflections of the continual recombinational repair, made possible in cases of natural or artificial genome redundancy.

Genetic assembly tools for synthetic biology

With the completion of myriad genome sequencing projects, genetic bioengineering has expanded into many applications including the integrated analysis of complex pathways, the construction of new biological parts and the redesign of existing, natural biological systems. All these areas require the precise and concerted assembly of multiple DNA fragments of various sizes, including chromosomes, and the fine-tuning of gene expression levels and protein activity. Current commercial cloning products are not robust enough to support the assembly of very large or very small genetic elements or a combination of both. In addition, current strategies are not flexible enough to allow further modifications to the original design without having to undergo complicated cloning strategies. Here, we present a set of protocols that allow the seamless, simultaneous, flexible, and highly efficient assembly of genetic material, designed for a wide size dynamic range (10s to 100,000s base pairs). The assembly can be performed either in vitro or within the living cells and the DNA fragments may or may not share homology at their ends. A novel site-directed mutagenesis approach enhanced by in vitro recombineering is also presented.

Replicon sequence typing of IncF plasmids carrying virulence and resistance determinants

OBJECTIVES

IncF plasmids are frequently encountered in clinical enterobacterial strains associated with the dissemination of relevant antimicrobial resistance and virulence genes. These plasmids are usually heterogeneous in size and carry multiple replicons, and technical difficulties can impair the comparison and detection of related plasmids by restriction fragment length polymorphism analysis. We devised a rapid sequence-based typing scheme to categorize the members of this plasmid family into homogeneous groups.

METHODS

We compared the available IncF replicon sequences, identifying the combination of the different IncF replicon alleles as the discriminating characteristic of these plasmid scaffolds. An IncF typing method based on PCR amplification and sequence typing of the IncF replicons was devised. A collection of IncF plasmids carrying resistance and/or virulence genes, identified in strains from different sources and geographical origins, was tested with this typing system.

RESULTS

We devised a replicon sequence typing (RST) scheme discriminating IncF plasmid variants. This system was tested on the collection of IncF plasmids, demonstrating that it was useful for the discrimination of plasmids carrying the same resistance gene (i.e. the bla(CTX-M-15) gene), but also recognized strictly related virulence plasmids (i.e. IncFIme plasmids). The PCR-based replicon typing (PBRT) system was also updated by including new primer pairs to allow the identification of the Salmonella, Klebsiella and Yersinia IncF plasmids.

CONCLUSIONS

The ability to recognize and sub-categorize IncF plasmids by RST in homogeneous groups on the basis of their phylogenetic relatedness can be helpful in analysing their distribution in nature and discovering their evolutionary origin.

Structural basis for regulation of bifunctional roles in replication initiator protein

DNA replication initiator protein RepE stringently regulates F plasmid replication by its two distinct molecular association states. A predominant dimer functions as an autogenous repressor, whereas monomers act as replication initiators, and the dimer requires actions of the DnaK molecular chaperone system for monomerization. The structure of the monomeric form is known, whereas the dimeric structure and structural details of the dimer-to-monomer conversion have been unclear. Here we present the crystal structure of the RepE dimer in complex with the repE operator DNA. The dimerization interface is mainly formed by intermolecular beta-sheets with several key interactions of charged residues. The conformations of the internal N- and C-terminal domains are conserved between the dimer and monomer, whereas the relative domain orientations are strikingly different, allowing for an efficient oligomeric transition of dual-functional RepE. This domain relocation accompanies secondary structural changes in the linker connecting the two domains, and the linker is included in plausible DnaK/DnaJ-binding regions. These findings suggest an activation mechanism for F plasmid replication by RepE monomerization, which is induced and mediated by the DnaK system.

Expression and purification of F-plasmid RepE and preliminary X-ray crystallographic study of its complex with operator DNA

The replication initiator factor RepE of the F plasmid in Escherichia coli is an essential protein that stringently regulates the F-plasmid copy number. The RepE protein has a dual function: its monomer functions as a replication initiator, while its dimer acts as a transcriptional repressor of the repE gene. The wild-type dimeric RepE protein was expressed as an N-terminal histidine-tagged protein, purified under native conditions with a high salt concentration and crystallized in complex with the repE operator DNA using the sitting-drop vapour-diffusion technique. The crystals diffracted to a resolution of 3.14 A after the application of dehydration and crystal annealing and belong to space group P2(1), with unit-cell parameters a = 60.73, b = 99.32, c = 95.00 A, beta = 108.55 degrees.

DNA phase transition promoted by replication initiator

DNA is flexible and easily subjected to bending and wrapping via DNA/protein interaction. DNA supercoiling is known to play an important role in a variety of cellular events, such as transcription, replication, and recombination. It is, however, not well understood how the superhelical strain is efficiently redistributed during these reactions. Here we demonstrate a novel property of an initiator protein in DNA relaxation by utilizing a one-molecule-imaging technique, atomic force microscopy, combined with biochemical procedures. A replication initiator protein, RepE54 of bacterial mini-F plasmid (2.5 kb), binds to the specific sequences (iterons) within the replication region (ori2). When RepE54 binds to the iterons of the negatively supercoiled mini-F plasmid, it induces a dynamic structural transition of the plasmid to a relaxed state. This initiator-induced relaxation is mediated neither by the introduction of a DNA strand break nor by a local melting of the DNA double strand. Furthermore, RepE54 is not wrapped by DNA repeatedly. These data indicate that a local strain imposed by initiator binding can induce a drastic shift of the DNA conformation from a supercoiled to a relaxed state.

Replication control of a small cryptic plasmid of Escherichia coli

The role of the RepA initiator protein in replication and copy-number control of pKL1, a small cryptic plasmid of Escherichia coli, was elucidated. The identified ori region encompasses a copy-number control element (cop) and an active single-strand initiation signal (ssi), n'-pasH, which were essential for efficient plasmid replication. The cop region also harbors a region of plasmid incompatibility, inc, encompassing a stem-loop structure, the repA promoter, Prep, as well as two distinct RepA binding sites, BD-1 and BD-2. RepA was shown to bind to these sites quite differently, binding primarily as a monomer or dimer to BD-1 to initiate RepA transcription and plasmid replication, and as higher oligomers to BD-2 to autoregulate repA transcription, the balance being reflected in plasmid copy number. An active integration host factor (IHF) binding sequence was located in the cop region and plasmid replication was shown to be dependent on host IHF encoding genes himA and himD. Low concentrations of IHF predisposed the cop region to RepA binding, although when highly expressed in trans RepA effectively displaced bound IHF and it overcame IHF dependency. Incompatibility was shown to be due to the titration of RepA at the cop locus but could be easily overridden by excess RepA. Both RepA binding sites were required to maintain incompatibility and effective pKL1 replication. Neither antisense RNA nor iterons were found to be involved in pKL1 regulation, thus pKL1 is a novel example of autoregulation of DNA replication. When produced in excess from a helper plasmid, RepA induced pKL1 replication to unusually high levels (>2500 copies/cell). In addition, pKL1 replication could be artificially modulated and a wide range of copy numbers maintained.

The MobA-linked primase is the only replication protein of R1162 required for conjugal mobilization

Cells newly transformed with plasmid R1162 DNA were used as donors in conjugal matings to determine if the plasmid replication genes are necessary for transfer. An intact system for vegetative replication is not required for transfer at normal frequency, but the plasmid primase, in the form linked to the nickase, must be present in donor cells.

Subcellular distribution of actively partitioning F plasmid during the cell division cycle in E. coli

F plasmid is partitioned with fidelity to daughter cells during cell division cycle owing to two trans-acting genes, sopA and sopB, and a cis-acting site, sopC. We visualized the subcellular distribution of mini-F-plasmid molecules by fluorescence in situ hybridization. Mini-F-plasmid molecules having the sopABC segment were localized at midcell in newborn cells. Replicated plasmid molecules migrated to cell positions 1/4 and 3/4 without coupling with cell elongation and were tethered to these positions until completion of cell division. In contrast, molecules of a mini F plasmid lacking the sopABC segment were distributed randomly in spaces not occupied by nucleoids. The sopABC system caused replicated plasmid molecules to be positioned and tethered at the cell quarter sites.

Characterization of the replicon of plasmid pSW500 of Erwinia stewartii

A 1.6-kb DNA region required for the replication of pSW500 from Erwinia stewartii SW2 has been identified. DNA sequencing analysis revealed that this DNA fragment consists of a DnaA box, seven 16-bp direct repeats, and a 1005-bp open reading frame. The seven direct repeats have been demonstrated to mediate the incompatibility function of the plasmid. Primer extension analysis showed that the 1005-bp ORF is transcribed in vivo and the +1 site of the transcript is located 113 bp upstream from the translation initiation codon of the ORF. Complementation studies showed that this ORF is required for the replication of the plasmid and may encode a replication protein, RepA. Gene fusion studies revealed that the expression of repA is autoregulated by RepA. We also found that the pSW500 replicon has a copy number of approximately two and that the plasmid is stably maintained in Escherichia coli, thus demonstrating that the replicon contains all the elements required for copy number control and plasmid stability in E. coli. Curing of pSW500 from E. stewartii SW2 revealed that loss of pSW500 did not have any obvious effect on morphology or physiology of the cells, suggesting that pSW500 does not encode a function that is indispensable for the survival of the organism.

A new vector for recombination-based cloning of large DNA fragments from yeast artificial chromosomes

The functional analysis of genes frequently requires manipulation of large genomic regions embedded in yeast artificial chromosomes (YACs). We have designed a yeast-bacteria shuttle vector, pClasper, that can be used to clone specific regions of interest from YACs by homologous recombination. The important feature of pClasper is the presence of the mini-F factor replicon. This leads to a significant increase in the size of the plasmid inserts that can be maintained in bacteria after cloning by homologous recombination in yeast. The utility of this vector lies in its ability to maintain large fragments in bacteria and yeast, allowing for mutagenesis in yeast and simplified preparation of plasmid DNA in bacteria. Using PCR-generated recombinogenic fragments in pClasper we cloned a 27 kb region from a YAC containing the Hoxc cluster and a 130 kb region containing the entire Hoxb cluster. No rearrangements were seen when the recombinants in the shuttle vector were transferred to bacteria. We outline the potential uses of pClasper for functional studies of large genomic regions by transgenic and other analyses.

A versatile low-copy-number cloning vector derived from plasmid F

We have constructed a cloning vector based on plasmid mini-F for use in Escherichia coli. Plasmid pZC320 consists of the ori-2 replication unit of F that confers very low copy number (lcn), and includes the sop partition functions to insure stable plasmid maintenance in the absence of selection. A multiple cloning site (MCS) containing 16 unique restriction sites is located within the 5' end of the lacZ alpha gene. Expression of lacZ alpha is under the control of the wild-type lactose operator/promoter (lacOP) region and is efficiently repressed by the lacI repressor. Clones containing inserts can be detected using the blue/white screen for beta-galactosidase (beta Gal). A T7 promoter allows transcription of cloned inserts in the presence of T7 RNA polymerase. We have demonstrated the use of this lcn vector for cloning the regulated tetracycline-resistance genes from Tn10, which confer only low-level resistance when present at high copy number.

DNA-binding domain of the RepE initiator protein of mini-F plasmid: involvement of the carboxyl-terminal region

The RepE initiator protein (251 residues) is essential for mini-F replication in Escherichia coli and exhibits two major functions: initiation of DNA replication from ori2 and autogenous repression of repE transcription. Whereas the initiation is mediated by RepE monomers that bind to the ori2 iterons (direct repeats), the autogenous repression is mediated by dimers that bind to the repE operator, which contains an inverted repeat sequence related to the iterons. We now report that the binding of RepE to these DNA sites is primarily determined by the C-terminal region of this protein. The mutant RepE proteins lacking either the N-terminal 33 (or more) residues or the C-terminal 7 (or more) residues were first shown to be defective in binding to both the ori2 and the operator DNAs. However, direct screening and analysis of mutant RepEs which are specifically affected in binding to the ori2 iterons revealed that the mutations (mostly amino acid substitutions) occur exclusively in the C-terminal region (residues 168 to 242). These mutant proteins exhibited reduced binding to ori2 and no detectable binding to the operator. Thus, whereas truncation of either end of RepE can destroy the DNA-binding activities, the C-terminal region appears to represent a primary DNA-binding domain of RepE for both ori2 and the operator. Analogous DNA-binding domains seem to be conserved among the initiator proteins of certain related plasmids.

A single 43-bp sopC repeat of plasmid mini-F is sufficient to allow assembly of a functional nucleoprotein partition complex

Stable maintenance of the low-copy-number mini-F plasmid in Escherichia coli is dependent on a functional partition system. The sop partition region encodes proteins SopA and SopB and a cis-acting element sopC, which contains multiple sites to which SopB binds. We have found that SopB protein acting at sopC in vivo is associated with a marked effect on plasmid DNA supercoiling, which may reflect the formation of a wrapped nucleoprotein complex. In this study, we demonstrate that a functional partition complex can form with a single 43-bp SopB binding site. Our experiments suggest that SopB bound at a single site nucleates the binding of additional SopB protein and wrapping of adjacent DNA sequences, such that approximately equal numbers of supercoils are restrained regardless of the number of tandem sopC repeats present. It is likely that this unusual nucleoprotein complex allows interaction of the plasmid with the partition apparatus.

Efficient generation of infectious recombinant baculoviruses by site-specific transposon-mediated insertion of foreign genes into a baculovirus genome propagated in Escherichia coli

The construction and purification of recombinant baculovirus vectors for the expression of foreign genes in insect cells by standard transfection and plaque assay methods can take as long as 4 to 6 weeks. This period can be reduced to several days by using a novel baculovirus shuttle vector (bacmid) that can replicate in Escherichia coli as a plasmid and can infect susceptible lepidopteran insect cells. The bacmid is a recombinant virus that contains a mini-F replicon, a kanamycin resistance marker, and attTn7, the target site for the bacterial transposon Tn7. Expression cassettes comprising a baculovirus promoter driving expression of a foreign gene that is flanked by the left and right ends of Tn7 can transpose to the target bacmid in E. coli when Tn7 transposition functions are provided in trans by a helper plasmid. The foreign gene is expressed when the resulting composite bacmid is introduced into insect cells.

Plasmid replication and maintenance in binary fissile microorganisms

The mechanisms of nonconjugative plasmid replication (in the single cell) and maintenance (at the population level) are of concern to the microbiologist and to the genetic engineer who wishes to exploit their ability to express cloned genes. This article concentrates mainly on Escherichia coli as the host organism and examines the mechanisms by which both naturally occurring and genetically engineered plasmids persist in populations during periods of growth. Additional strategies to ensure high yields of recombinant product are briefly considered.

Mini-F plasmid mutants able to replicate in Escherichia coli deficient in the DnaJ heat shock protein

A subset of Escherichia coli heat shock proteins, DnaJ, DnaK, and GrpE, is required for mini-F plasmid replication, presumably at the step of functioning of the RepE initiator protein. We have isolated and characterized mini-F plasmid mutants that acquired the ability to replicate in the Escherichia coli dnaJ259. The mutant plasmids were found to replicate in any of dnaJ, dnaK, and grpE mutant hosts tested. In each case, the majority of the mutant plasmids carried a unique amino acid alteration in a localized region of repE coding sequence and showed an increased copy number, whereas the minority contained a common single base change (C to T) in the promoter/operator region and produced an increased amount of RepE. All RepE proteins with altered residues (between 92 and 134) exhibited increased initiator activities (hyperactive), and many showed reduced repressor activities as well, indicating that this region is important for the both major functions of RepE protein. These results together with evidence reported elsewhere indicate that the subset of heat shock proteins serves to activate RepE protein prior to or during its binding to the replication origin and that the mutant RepE proteins are active even in their absence. We also found that a C-terminal lesion (repE602) reduces the initiator activity particularly of some hyperactive mutant RepE proteins but does not affect the repressor activity. This finding suggests a functional interaction between the central and C-terminal regions of RepE in carrying out the initiator function.

The amount of RepR protein determines the copy number of plasmid pIP501 in Bacillus subtilis

To prove the hypothesis that the amount of RepR protein is the rate-limiting factor for replication of plasmid pIP501 in Bacillus subtilis, the repR gene was placed under control of the inducible promoter pspac. The plasmid copy number of the pIP501 derivative pRS9 could be deliberately adjusted between approximately 1 and 50 to 100 molecules per cell by varying the concentration of the inducer isopropyl-beta-D-thiogalactopyranoside. Construction of a repR-lacZ fusion proved that the increase in copy number was due to a proportional increase in the amount of RepR protein.

Replication of mini-F plasmids during the bacterial division cycle

The cell-cycle replication patterns of two mini-F plasmids have been examined using the membrane-elution technique (to produce cells labelled at different times during the division cycle) and scintillation counting (for quantitative analysis of radioactivity incorporated into plasmid DNA). The mini-F plasmid pML31, which contains the oriV and oriS origins of replication, replicates in a cell-cycle-specific manner with a pattern and cell-cycle timing similar to the parental F plasmid. The mini-F plasmid pMF21, deleted for the region containing the oriV origin of replication, replicates more randomly throughout the division cycle. These results suggest that the oriV origin of replication may be related to cell-cycle-specific replication of the F plasmid.

Site-specific proteolysis of mini-F plasmid replication protein RepE destroys initiator function and generates an incompatibility substance

Plasmid F replication is controlled by a plasmid-specified Rep protein with both autorepressor and initiator functions. The mechanism by which these two functions of a Rep protein are balanced to achieve stable replication is unknown; however, we speculated in prior work that Rep protein modification could be involved. We report here that naturally proteolyzed F RepE protein has been detected and characterized. The processed molecule lost the first 17 N-terminal aminoacyl residues and initiator function but acquired increased specific DNA-binding affinity in the presence of Escherichia coli chromosomal DNA. When supplied in trans, the altered protein acts as an incompatibility substance and eliminates maintenance of F'lac. These findings indicate that protein processing has the potential to contribute to the overall control of DNA replication.

Identification of eleven single-strand initiation sequences (ssi) for priming of DNA replication in the F, R6K, R100 and ColE2 plasmids

Based on the ability to complement the poor growth of an M13 phage derivative lacking the complementary strand origin, eleven single-strand initiation sequences (ssi) for DNA replication are identified in the F, R6K, R100 and ColE2 plasmids. Six of them were from F, two from near the gamma and alpha origins (ori) of R6K, two from the vicinity of the basic replicon of R100 and one from near the ori of ColE2. They can be classified into two groups based on the morphology of the plaques and the length of nucleotide (nt) sequences required for ssi activity; one group that gives rise to larger and clearer plaques and can be reduced to nearly 100 nt (seven out of eleven), and another that generates smaller and less clear plaques and requires more than 200 nt for full activity (four out of eleven). Sequence homology is detected among some members from both groups. The possible biological roles of the ssi are discussed.

Partitioning of a mini-F plasmid into anucleate cells of the mukB null mutant

The partition-proficient mini-F plasmid pXX325 was stably maintained in the mukB null mutant, which is defective in chromosome partitioning into the two daughter cells. In the null mutant, the plasmid was partitioned into both nucleate and anucleate daughter cells, independently of host chromosomes.

A copy-number mutant of plasmid pSC101

Copy-number mutants of plasmid pSC101 were isolated by u.v. mutagenesis and selection for elevated expression of ampicillin resistance. Three independent mutations were identical and mapped in codon 93 of the initiation protein RepA. The mutated plasmids were maintained at a level four to five times higher than that of the wild type. For one of them, it was determined that: (i) the mRNA of the autoregulated repA gene, cloned onto a pUC19 plasmid under the control of its own promoter, was expressed at a level 1.7 times higher than that of the wild type; (ii) the RepA protein, under the same conditions, was expressed at a similarly higher level; (iii) the affinity of the mutated protein for three repeated sequences in the origin region of the plasmid was, on average, 3.4 times higher than that of the wild-type protein. We postulate that the copy-number effect is due to a combination of these two effects, i.e. higher protein concentration and increased affinity of the protein for the repeated sequences.

Possible involvement of the ugpA gene product in the stable maintenance of mini-F plasmid in Escherichia coli

The seg-3 mutant Escherichia coli does not support the maintenance of mini-F plasmid at 42 degrees C. We cloned the chromosomal DNA segment of the wild-type strain W3110 that complements the Seg- phenotype of this mutant. Cleavage mapping of this segment showed that it was derived from the 76-min region of the E. coli chromosome map. Complementation tests using plasmids carrying subcloned DNA segments suggested that the seg-3 mutant carried two mutations that additively affected the maintenance of mini-F plasmid; one was in the ugpA gene and the other was presumably in the rpoH gene. We generated a disrupted ugpA null mutant and found that the mini-F plasmid was unstable in this ugpA null mutant even at 30 degrees C. This suggests that the ugpA gene product is required for the stable maintenance of mini-F plasmid.

Inhibition of cell growth and stable DNA replication by overexpression of the bla gene of plasmid pBR322 in Escherichia coli

A composite plasmid comprising the mini-F and pBR322 replicons was found to inhibit cell growth of a host with conditional mutations in dnaA and rnh under restrictive conditions, where the normal initiation of replication from oriC was inactivated, but the alternative replication initiation from oriK was active. It was further shown that the composite plasmid inhibited stable DNA replication (SDR) which occurs constitutively in cells mutant for rnh. Neither pBR322 nor mini-F alone produced these inhibitory effects. Deletion analyses revealed that the mini-F segment responsible for the inhibition of both processes was the promoter region of the sopA gene which had been cloned into a site upstream of the bla gene on pBR322 in such an orientation as to cause overexpression of bla. Inserting the promoter of the Escherichia coli lac gene into the same site had the same effect. Introduction of a deletion and a frameshift mutation into bla abolished the inhibition. Thus, the inhibition of growth and SDR appear to be due to overproduction of the bla gene product, beta-lactamase.

Isolation of the replication and partitioning regions of the Salmonella typhimurium virulence plasmid and stabilization of heterologous replicons

Although the virulence plasmid of Salmonella typhimurium has a copy number of one to two per chromosome, plasmid-free segregants are produced at a rate less than 10(-7) per cell per generation. Three regions appear to be involved in the maintenance of this virulence plasmid. The first two, repB and repC, are functional replicons hybridizing with IncFII and IncFI plasmids, respectively, neither exhibiting the segregational stability of the parent virulence plasmid. The third region, par, cloned as a 3.9-kilobase Sau3A fragment, is not a functional replicon but exhibits incompatibility with the virulence plasmid. Subsequent tests revealed the ability of this 3.9-kilobase par insert to increase the stability of pACYC184 in S. typhimurium from less than 34% to 99% plasmid-containing cells after 50 generations. In addition, the par region increased the stability of oriC, R388, and repC replicons in both S. typhimurium and Escherichia coli hosts. The par region encodes 44,000- and 40,000-molecular-weight proteins essential for the Par+ phenotype but not for the Inc+ phenotype. Although actual sequestering of plasmids within the cell was not demonstrated, all results indicate that the par region described is an actual partitioning locus, similar in organization to those described for plasmids F, P1, and NR1.

Roles of Escherichia coli heat shock proteins DnaK, DnaJ and GrpE in mini-F plasmid replication

A subset of Escherichia coli heat shock proteins, DnaK, DnaJ and GrpE were shown to be required for replication of mini-F plasmid. Strains of E. coli K12 carrying a missense mutation or deletion in the dnaK, dnaJ, or grpE gene were virtually unable to be transformed by mini-F DNA at the temperature (30 degrees C) that permits cell growth. When excess amounts of the replication initiator protein (repE gene product) of mini-F were provided by means of a multicopy plasmid carrying repE, these mutant bacteria became capable of supporting mini-F replication under the same conditions. However, the copy number of a high copy number mini-F plasmid was reduced in these mutant bacteria as compared with the wild type in the presence of excess RepE protein. Furthermore, mini-F plasmid mutants that produce altered initiator protein and exhibit a very high copy number were able to replicate in strains deficient in any of the above heat shock proteins. These results indicate that the subset of heat shock proteins (DnaK, DnaJ and GrpE) play essential roles that help the functioning of the RepE initiator protein in mini-F DNA replication.

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

Involvement of DnaK protein in mini-F plasmid replication: temperature-sensitive seg mutations are located in the dnaK gene

The seg mutants (seg-1 and seg-2) of Escherichia coli cannot support the replication of the F factor and mini-F plasmids at 42 degrees C. We cloned the wild-type E. coli chromosomal DNA fragment complementing the seg-1 and seg-2 mutations and found that both mutations were complemented by the wild-type dnaK gene coding for a heat shock protein. Transduction with phage P1 indicated that the seg-2 mutation is located at about 0.3 min in the region containing the dnaK gene in the order trpR--thrA--seg-2--leuB, consistent with the locus of the dnaK gene. Cloning and sequencing of the dnaK gene of the seg mutants showed that there was one base substitution within the dnaK gene in each mutant causing an amino acid substitution. These results indicate that the seg gene in which the seg-1 and seg-2 mutations occurred is identical to the dnaK gene. The mini-F plasmid pXX325 did not transform a dnaK null mutant to ampicillin resistance at 30 degrees C in contrast to plasmids pBR322, pACYC184 and pSC101, which did. The active dnaK (seg) gene product is therefore essential for replication of the mini-F plasmid at both 30 degrees and 42 degrees C.

Chromosomal genes essential for stable maintenance of the mini-F plasmid in Escherichia coli

We have isolated mutants of Escherichia coli which do not support stable maintenance of mini-F plasmids (delta ccd rep+ sop+). These host mutations, named hop, were classified into five linkage groups on the E. coli chromosome. Genetic analyses of these hop mutations by Hfr mating and P1 transduction showed their loci on the E. coli genetic map to be as follows: hopA in the gyrB-tnaA region, hopB in the bglB-oriC region, hopD between 8 and 15 min, and hopE in the argA-thyA region. Kinetics of stability of the sop+ and delta sop mini-F plasmids in these hop mutants suggest that the hopA mutants are defective in partitioning of mini-F rather than in plasmid replication. The hopB, hopC, and hopD mutants were partially defective in replication of mini-F. The physical structure of the plasmid DNA was normal in hopA, B, C, and D mutants. Large amounts of linear multimers of plasmid DNA accumulated in mutants of the fifth linkage group (hopE). None of the hop mutations in any linkage group affected the normal growth of cells.

Ultraviolet light induces different spectra of lacI sequence changes in vegetative and conjugating cells of Escherichia coli

We have analyzed the nucleotide sequence changes responsible for mutations from lacIs to lacI- induced in ultraviolet light-irradiated, excision-deficient cells. Irradiated cells were either used as donors in the conjugational transfer of an F' lacIs plasmid to SOS-induced, excision-deficient recipients or allowed to continue vegetative growth. Although the types and proportions of premutagenic lesions are likely to have been very similar in these two circumstances, analysis of the sequence data shows that different spectra of mutations were induced. In vegetative cells there were about equal numbers of transitions and transversions, but transitions outnumbered transversions by about three to one in exconjugants. About 90% of the single nucleotide substitutions could be assigned to a bipyrimidine target sequence in both sets of data, but they differed with respect to the location of the substitution: more or less equal numbers were found at the 3' and 5' sites of the probable bipyrimidine target in vegetative cells, but in exconjugants over 80% were at the 3' site. It is also possible that mutations were targeted more commonly at T-C sequences in exconjugants than in vegetative cells, but the evidence for this is less secure. We conclude that these results reflect some dissimilarity between vegetative cells and exconjugants in the way damaged DNA is replicated or lesions tolerated, but the particular features of these processes responsible for the different mutational spectra have not yet been identified.

Identification and classification of bacterial plasmids

Images

Mutations at the cysteine codons of the recA gene of Escherichia coli

Each of the three cysteine residues in the Escherichia coli RecA protein was replaced with a number of other amino acids. To do this, each cysteine codon was first converted to a chain-terminating amber codon by oligonucleotide-directed mutagenesis. These amber mutants were then either assayed for function in different suppressor strains or reverted by a second round of mutagenesis with oligonucleotides that had random sequences at the amber codon. Thirty-three different amino acid substitutions were obtained. Mutants were tested for three functions of RecA: survival following UV irradiation, homologous recombination, and induction of the SOS response. It was found that although none of the cysteines is essential for activity, mutations at each of these positions can affect one or more of the activities of RecA, depending on the particular amino acid substitution. In addition, the cysteine at position 116 appears to be involved in the RecA-promoted cleavage of the LexA protein.