Characterization of the drug resistance plasmid NTP16

Characterization of a 3.3-kb plasmid of Escherichia coli O157:H7 and evaluation of stability of genetically engineered derivatives of this plasmid expressing green fluorescence

Enterohemorrhagic Escherichia coli (EHEC) O157:H7 (strain 86-24) harbors a 3.3-kb plasmid (pSP70) that does not encode a selectable phenotype. A 1.1-kb fragment of DNA encoding kanamycin resistance (Kan(r)) was inserted by in vitro transposon mutagenesis at a random location on pSP70 to construct pSP70-Kan(r) that conferred Kan(r) to the host E. coli strain. Oligonucleotides complementary to 5' and 3' ends of the fragment encoding Kan(r) were used for initiating nucleotide sequencing from the plus and minus strands of pSP70, and thereafter primer walking was used to determine nucleotide sequence of pSP70. Analysis of nucleotide sequence revealed that pSP70 contained 3306 base pairs in its genome and that the genome was almost 100% identical to nucleotide sequences of small plasmids identified in EHEC O157:H7 isolates from Germany and Japan. A DNA cassette encoding a green fluorescent protein (GFP), ampicillin resistance (Amp(r)), and a double transcriptional terminator (DT) was cloned in pSP70 either at the BamHI site (created by deletion of mobA by PCR) or at the NsiI site located downstream of mobA to generate pSP70 DeltamobA-GFP/Amp(r)/DT (pSM431) and pSP70-GFP/Amp(r)/DT (pSM433), respectively. Introduction of pSM431 or pSM433 into EHEC O157:H7 yielded ampicillin-resistant colonies that glowed green under UV illumination. Consecutive subcultures of EHEC O157:H7, carrying pSM431 or pSM433 under conditions simulating the environment of bovine intestine (no selective antibiotic, incubation temperature of 39 degrees C, with or without oxygen), demonstrated that these plasmids were highly stable as greater than 95% of the isolates recovered from these subcultures were positive for green fluorescence. These findings indicate that EHEC O157:H7 carrying pSM431 or pSM433 would be useful for studying persistence and shedding of this important food-borne pathogen in cattle.

A 3.3-kb plasmid of enterohemorrhagic Escherichia coli O157:H7 is closely related to the core region of the Salmonella typhimurium antibiotic resistance plasmid NTP16

A restriction enzyme map was constructed of a 3.3-kb plasmid derived from enterohemorrhagic Escherichia coli O157:H7 strain 4821 using the enzymes SmaI, HpaI, FokI, HaeIII, StyI, RsaI, Bg/II, ClaI, and EcoRV. The molecular size of p4821 was 3307 bp, determined by nucleotide sequencing. Homology searches in the EMBL database library revealed that the nucleotide sequence of P4821 is similar (> 98%) to the core region of the antibiotic resistance plasmid NTP16 of Salmonella typhimurium strains. Nucleotide sequence analysis showed that p4821 contains all the information necessary for its replication, stability, and mobilization. However, the lack of tra genes indicates that the plasmid is nonconjugative. A possible transposon insertion site was found in p4821 but two such sites were found at the boundaries between the core region and the antibiotic resistance encoding transposons in plasmid NTP16. Using a hybridization assay, we determined that of 50 E. coli O157:H7 strains isolated in 1996 in Würzburg, Germany from patients with diarrhea and hemolytic-uremic syndrome, 4 strains (8%) contained plasmid p4821-specific sequences.

Lateral transfer of rfb genes: a mobilizable ColE1-type plasmid carries the rfbO:54 (O:54 antigen biosynthesis) gene cluster from Salmonella enterica serovar Borreze

Plasmid pWQ799 is a 6.9-kb plasmid isolated from Salmonella enterica serovar Borreze. Our previous studies have shown that the plasmid contains a functional biosynthetic gene cluster for the expression of the O:54 lipopolysaccharide O-antigen of this serovar. The minimal replicon functions of pWQ799 have been defined, and a comparison with nucleotide and protein databases revealed this replicon to be virtually identical to ColE1. This is the first report of involvement of ColE1-related plasmids in O-antigen expression. The replicon of pWQ799 is predicted to encode two RNA molecules, typical of other ColE1-type plasmids. RNAII, the putative replication primer from pWQ799, shares regions of homology with RNAII from ColE1. RNA1 is an antisense regulator of DNA replication in ColE1-related plasmids. The coding region for RNAI from pWQ799 shares no homology with any other known RNAI sequence but is predicted to adopt a secondary structure characteristic of RNAI molecules. pWQ799 may therefore represent a new incompatibility group within this family. pWQ799 also possesses cer, rom, and mob determinants, and these differ minimally from those of ColE1. The plasmid is mobilizable in the presence of either the broad-host-range helper plasmid pRK2013 or the IncI1 plasmid R64drd86. Mobilization and transfer of pWQ799 to other organisms provides the first defined mechanism for lateral transfer of O-antigen biosynthesis genes in S. enterica and explains both the distribution of related plasmids and coexpression of the O:54 factor with other O-factors in different Salmonella serovars. The base composition of the pWQ799 replicon sequences gives an average percent G+C value typical of Salmonella spp. In contrast, the percent G+C value is dramatically lower with rfb0:54, consistent with the possibility that the cluster was acquired from an organism with much lower G+C composition.

Complete nucleotide sequence and gene organization of plasmid NTP16

We have determined the complete nucleotide sequence of the 8.3-kb multicopy plasmid NTP16 and produced a functional map of its gene organization. Sixty percent of the plasmid DNA comprises transposon-derived sequences; in the remaining 3320 bp, we have identified three protein coding regions. NTP16 has a ColE1-type replication system, a cis-acting stability locus and a mobilization system comprising an oriT site and one mobilization protein. The roles of the other two protein products of this plasmid are unknown, but they are possibly involved in the plasmid incompatibility system.

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

Conjugal mobility of the multicopy plasmids NTP1 and NTP16

Mobilization of the multicopy plasmid NTP16, like that of ColE1, is promoted by a range of conjugal plasmids. However, the mechanisms employed for NTP16 mobilization differ between groups. Mobilization by the IncI1 plasmid R64 requires trans-acting products from NTP16 plus a cis-acting region of the small plasmid. In contrast, this system is used inefficiently by the F plasmid and instead, a high-frequency conduction process occurs. Analysis of exconjugant cells reveals that F-mediated mobilization of NTP16 frequently involves rearrangements of NTP16 DNA, promoted by the Tn1000 transposon of F and/or by the kanamycin resistance transposon (Tn4352) of NTP16. Possible mechanisms for the high-frequency F-mediated mobilization of NTP16 are discussed. The plasmid NTP1, which is closely related to NTP16, is also mobilized efficiently by R64. It is not however efficiently mobilized by F, demonstrating the requirement for the Tn4352 element, which is not present in this plasmid, for effective F-mediated transfer.

A pathway for the evolution of the plasmid NTP16 involving the novel kanamycin resistance transposon Tn4352

The kanamycin resistance determinant of the drug resistance plasmid NTP16 has been characterized by DNA sequencing and has been shown to possess all of the structural features of a transposable element. It is made up of a 1040-bp central region encoding a protein identical to the aminoglycoside 3'-phosphotransferase of Tn903, flanked by direct repeats of an element identical to IS26. This novel transposon has been designated Tn4352. Analysis of the host sequences flanking the transposon reveal that they are derived from a Tn3-like element, and contain no 8 base pair target size duplications which are normally created by the insertion of IS26-like elements. Comparison to the Tn3 sequence shows that the flanking sequences are noncontiguous within Tn3, with the clear implication that NTP16 has evolved from a similar plasmid encoding only ampicillin resistance (presumably NTP1) by the insertion of Tn4352 into the Tn3-like element, followed by a substantial deletion. The sequence analysis suggests that the initial insertion was into the tnpR gene of the ampicillin transposon, followed by a deletion extending to a specific site within tnpA.