Cloning and nucleotide sequence of the ColIb shufflon

Interference of ISEcp1-blaCTX-M-1 with the shufflon rearrangement in IncI1 plasmids

IncI1 plasmids are known disseminators of the extended-spectrum cephalosporin resistance (ESC) gene bla_CTX-M-1, among species of the Enterobacteriaceae family. In several IncI1 plasmids, this gene was found incorporated into the transposition unit, ISEcp1-bla_CTX-M-1-orf477, interrupting a shufflon region, a hallmark of IncI1 conjugative plasmids. The shufflon diversifies pilV gene that encodes the adhesine-type protein found on the tip of the conjugative pilus. To further elucidate the shufflon rearrangement, we examined to what extent the shufflon rearrangement was affected by the transposition-unit insertion. As expected, the interrupted shufflons generated a lower number of shufflon variants and exhibited an altered segment-deletion pattern compared to the non-interrupted shufflon. Interestingly, segment-loss frequency of the interrupted shufflons was distinctive in different plasmid hosts. Finally, the analysis of the 3' end of the pilV gene revealed that shufflon rearrangement favoured segment A to complete pilV partial open reading frame regardless of the shufflon. Thereby, it could be assumed that the A-segment has greater importance during conjugation, however, this remained a hypothesis. Further exploration of shufflon rearrangement and its importance in the plasmid-recipient selection during conjugation would be beneficial as the knowledge could be applied in developing a strategy to limit IncI1 mediated antimicrobial resistance dissemination.

The shufflon of IncI1 plasmids is rearranged constantly during different growth conditions

One of the factors that can affect conjugation of IncI1 plasmids, amongst others, is the genetic region known as the shufflon. This multiple inversion system modifies the pilus tip proteins used during conjugation, thus affecting the affinity for different recipient cells. Although recombination is known to occur in in vitro conditions, little is known about the regulation and the extent of recombination that occurs. To measure the recombination of the shufflon, we have amplified the entire shufflon region and sequenced the amplicons using nanopore long-read sequencing. This method was effective to determine the order of the segments of the shufflon and allow for the analysis of the shufflon variants that are present in a heterogeneous pool of templates. Analysis was performed over different growth phases and after addition of cefotaxime. Furthermore, analysis was performed in different E. coli host cells to determine if recombination is likely to be influenced. Recombination of the shufflon was constantly ongoing in all conditions that were measured, although no differences in the amount of different shufflon variants or the rate at which novel variants were formed could be found. As previously reported, some variants were abundant in the population while others were scarce. This leads to the conclusion that the shufflon is continuously recombining at a constant rate, or that the method used here was not sensitive enough to detect differences in this rate. For one of the plasmids, the host cell appeared to have an effect on the specific shufflon variants that were formed which were not predominant in another host, indicating that host factors may be involved. As previously reported, the pilV-A and pilV-A' ORFs are formed at higher frequencies than other pilV ORFs. These results demonstrate that the recombination that occurs within the shufflon is not random. While any regulation of the shufflon affected by these in vitro conditions could not be revealed, the method of amplifying large regions for long-read sequencing for the analysis of multiple inversion systems proved effective.

IncI shufflons: Assembly issues in the next-generation sequencing era

The shufflon is a site-specific recombination system first identified in the IncI1 plasmid R64. The R64 shufflon consists of four segments, separated by short repeats, which are rearranged and inverted by the recombinase protein Rci, generating diversity in the C-terminal end of the PilV protein. PilV is the tip adhesin of the thin pilus structure involved in bacterial conjugation and may play a role in determining recipient cell specificity during liquid mating. The variable arrangements of the shufflon region would be expected to make plasmid assembly difficult, particularly with short-read sequencing technology, but this is not usually mentioned in recent publications reporting IncI plasmid sequences. Here we discuss the issues we encountered with assembly of IncI1 sequence data obtained from the Roche-454 and Illumina platforms and make some suggestions for assembly of the shufflon region. Comparison of shufflon segments from a collection of IncI1 plasmids from The Netherlands and Australia, together with sequences available in GenBank, suggests that the number of shufflon segments present is conserved among plasmids grouped together by plasmid multi-locus sequencing typing but the different reported arrangements of shufflon segments may not be meaningful. This analysis also indicated that the sequences of the shufflon segments are highly conserved, with very few nucleotide changes.

PilV Adhesins of Plasmid R64 Thin Pili Specifically Bind to the Lipopolysaccharides of Recipient Cells

IncI1 plasmid R64 encodes type IV pili or thin pili, which contain PilV adhesins. The C-terminal segments of PilV adhesins are exchanged into seven types by shufflon multiple DNA inversion. PilV adhesins determine recipient specificity in R64 liquid matings through the recognition of lipopolysaccharides (LPSs) on the surface of recipient cells. Using various waa mutants of Escherichia coli R1 as recipient cells, liquid mating experiments suggest that PilVA adhesin recognizes the GlcNAc(beta1-3)Glc moiety of E.coli R1 type LPS. The direct binding of PilV adhesins to LPSs of the recipient bacterial strains was demonstrated using filter overlay assays. The specificity of PilV-LPS binding is in close agreement with the recipient specificity determined by R64 liquid matings. The C-terminal segments of PilVA, PilVC, PilVC', and PilVD' adhesins were expressed as fusion proteins with glutathione-S-transferase (GST). GST-A, GST-C, GST-C', and GST-D' proteins bound to their respective LPSs with the specificities identical with those determined in the R64 liquid matings, indicating that the C-terminal segments of PilV adhesins bind to specific moieties of LPS molecules.

Shufflons: multiple inversion systems and integrons

Conservative site-specific recombination functions to create biological diversity in prokaryotes. Simple site-specific recombination systems consist of two recombination sites and a recombinase gene. The plasmid R64 shufflon contains seven recombination sites, which flank and separate four DNA segments. Site-specific recombinations mediated by the product of the rci gene between any two inverted recombination sites result in the inversion of four DNA segments independently or in groups. The shufflon functions as a biological switch to select one of seven C-terminal segments of the PilV proteins, which is a minor component of R64 thin pilus. The shufflon determines the recipient specificity in liquid matings of plasmid R64. Other multiple inversion systems as well as integrons, which are multiple insertion systems, are also described in this review.

Purification and characterization of thin pili of IncI1 plasmids ColIb-P9 and R64: formation of PilV-specific cell aggregates by type IV pili

Thin pili of the closely related IncI1 plasmids ColIb-P9 and R64 are required only for liquid mating and belong to the type IV family of pili. They were sedimented by ultracentrifugation from culture medium in which Escherichia coli cells harboring ColIb-P9- or R64-derived plasmids had been grown, and then the pili were purified by CsCl density gradient centrifugation. In negatively stained thin pilus samples, long rods with a diameter of 6 nm, characteristic of type IV pili, were observed under an electron microscope. Gel electrophoretic analysis of purified ColIb-P9 thin pili indicated that thin pili consist of two kinds of proteins, pilin and the PilV protein. Pilin was demonstrated to be the product of the pilS gene. Pilin was first synthesized as a 22-kDa prepilin from the pilS gene and subsequently processed to a 19-kDa protein by the function of the pilU product. The N-terminal amino group of the processed protein was shown to be modified. The C-terminal segments of the pilV products vary among six or seven different types, as a result of shufflon DNA rearrangements of the pilV gene. These PilV proteins were revealed to comprise a minor component of thin pili. Formation of PilV-specific cell aggregates by ColIb-P9 and R64 thin pili was demonstrated and may play an important role in liquid mating.

Similarities and differences among 105 members of the Int family of site-specific recombinases

Alignments of 105 site-specific recombinases belonging to the Int family of proteins identified extended areas of similarity and three types of structural differences. In addition to the previously recognized conservation of the tetrad R-H-R-Y, located in boxes I and II, several newly identified sequence patches include charged amino acids that are highly conserved and a specific pattern of buried residues contributing to the overall protein fold. With some notable exceptions, unconserved regions correspond to loops in the crystal structures of the catalytic domains of lambda Int (Int c170) and HP1 Int (HPC) and of the recombinases XerD and Cre. Two structured regions also harbor some pronounced differences. The first comprises beta-sheets 4 and 5, alpha-helix D and the adjacent loop connecting it to alpha-helix E: two Ints of phages infecting thermophilic bacteria are missing this region altogether; the crystal structures of HPC, XerD and Cre reveal a lack of beta-sheets 4 and 5; Cre displays two additional beta-sheets following alpha-helix D; five recombinases carry large insertions. The second involves the catalytic tyrosine and is seen in a comparison of the four crystal structures. The yeast recombinases can theoretically be fitted to the Int fold, but the overall differences, involving changes in spacing as well as in motif structure, are more substantial than seen in most other proteins. The phenotypes of mutations compiled from several proteins are correlated with the available structural information and structure-function relationships are discussed. In addition, a few prokaryotic and eukaryotic enzymes with partial homology with the Int family of recombinases may be distantly related, either through divergent or convergent evolution. These include a restriction enzyme and a subgroup of eukaryotic RNA helicases (D-E-A-D proteins).

Generation of Campylobacter fetus S-layer protein diversity utilizes a single promoter on an invertible DNA segment

Wild-type strains of Campylobacter fetus contain a monomolecular array of surface layer proteins (SLPs) and vary the antigenicity of the predominant SLP expressed. Reciprocal recombination events among the eight genomic SLP gene cassettes, which encode 97- to 149 kDa SLPs, permit this variation. To explore whether SLP expression utilizes a single promoter, we created mutant bacterial strains using insertional mutagenesis by rescue of a marker from plasmids. Experimental analysis of the mutants created clearly indicates that SLP expression solely utilizes the single sapA promoter, and that for variation C. fetus uses a mechanism of DNA rearrangement involving inversion of a 6.2 kb segment of DNA containing this promoter. This DNA inversion positions the sapA promoter immediately upstream of one of two oppositely oriented SLP gene cassettes, leading to its expression. Additionally, a second mechanism of DNA rearrangement occurs to replace at least one of the two SLP gene cassettes bracketing the invertible element. As previously reported promoter inversions in prokaryotes, yeasts and viruses involve alternate expression of at most two structural genes, the ability of C. fetus to use this phenomenon to express one of multiple cassettes is novel.

Nucleotide sequence and characterization of the trbABC region of the IncI1 Plasmid R64: existence of the pnd gene for plasmid maintenance within the transfer region

A 6.72-kb DNA sequence between the exc gene and the oriT operon within the transfer region of IncI1 plasmid R64 was sequenced and characterized. Three novel transfer genes, trbA, trbB, and trbC, were found in this region, along with the pnd gene responsible for plasmid maintenance. The trbABC genes appear to be organized into an operon located adjacent to the oriT operon in the opposite orientation. The trbA and trbC genes were shown to be indispensable for R64 plasmid transfer, while residual transfer activity was detected in the case of R64 derivatives carrying the trbB++ deletion mutation. The T7 RNA polymerase-promoter system revealed that the trbB gene produced a 43-kDa protein and the trbC gene produced an 85-kDa protein. The nucleotide sequence of the pnd gene is nearly identical to that of plasmid R483, indicating a function in plasmid maintenance. The plasmid stability test indicated that the mini-R64 derivatives with the pnd gene are more stably maintained in Escherichia coli cells under nonselective conditions than the mini-R64 derivatives without the pnd gene. It was also shown that the R64 transfer system itself is involved in plasmid stability to a certain degree. Deletion of the pnd gene from the tra+ mini-R64 derivative did not affect transfer frequency. DNA segments between the exc and trbA genes for IncI1 plasmids R64, Colb-P9, and R144 were compared in terms of their physical and genetic organization.

Mating variation by DNA inversions of shufflon in plasmid R64

Gene organization of the 54-kb transfer region of IncI1 plasmid R64 was deduced from the DNA sequence. Forty-eight ORFs were found in this region. A unique DNA rearrangement designated shufflon is located at the downstream region of an operon responsible for synthesis of thin pilus. The shufflon of R64 consists of four DNA segments, designated as A, B, C, and D, which are flanked and separated by seven 19-bp repeat sequences. Site-specific recombination mediated by the product of the rci gene between any two inverted repeats results in a complex DNA rearrangement. An analysis of open reading frames revealed that the shufflon is a biological switch to select one of seven C-terminal segments of the pilV genes. The products of pilV genes were shown to be components of thin pilus which was required for liquid mating. Seven R64 derivatives where the pilV genes were fixed in the seven C-terminal segments were constructed and their transfer frequencies in liquid mating were measured using various bacterial strains as recipients. Transfer frequencies of R64 in liquid mating strongly depended on the combination of C-terminal segments of the pilV genes in donor cells and bacterial strains of recipient cells, suggesting that the shufflon determines the recipient specificity in liquid mating of plasmid R64.

Nucleotide sequence of the R721 shufflon

The shufflon is a DNA region that undergoes complex rearrangement mediated by the product of a putative site-specific recombinase gene, rci. The DNA sequences of the shufflon region and the rci gene of IncI2 plasmid R721 were determined. The R721 shufflon consists of three invertible DNA segments that are homologous to the shufflon segments found in IncI1 plasmid R64. Structural analysis of open reading frames indicated that the R721 shufflon possibly functions as a biological switch for selecting one of the six pilV genes in which the N-terminal region is constant and the C-terminal region is variable. The R721 rci gene was shown to encode a basic protein of 374 amino acid residues.