Autoxidation and yellowing of methyl linolenate

Potential biomarkers for southern African hunter-gatherer arrow poisons applied to ethno-historical and archaeological samples

The detection of complex poison recipes applied to ancient hunting weapons has the potential to provide important insights into traditional pharmacological knowledge systems. Yet, recipes comprising many ingredients can be challenging to decipher, especially in older samples that have undergone biodegradation. We present the results of our attempt to analyze samples of poison collected from nineteenth and twentieth century arrowheads from southern Africa, and from a 1000-year-old archaeological bone point. The arrow poison residues and reference samples were analyzed by Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR FTIR) and Gas Chromatography Mass Spectrometry (GC-MS). The ATR FTIR analysis is primarily able to separate between different arrow poison binder recipes. The extractives identified by GC-MS analysis consist of a multitude of components from both binders and active substances, confirming and adding to the results from the ATR FTIR analyses. We discuss the results in terms of potential biomarkers for arrow poisons in organic residue analyses of archaeological artefacts; that residues of toxic cardiotonic glycosides can be detected on curated and excavated arrow tips of between about 1000 and 100 years old, serves as proof of concept for working with older materials in the future.

Synthesis and Properties of Fully Biobased Crosslinked Starch Oleate Films

Starch oleate (degree of substitution = 2.2) films were cast and crosslinked in the presence of air using UV curing (UVC) or heat curing (HC). A commercial photoinitiator (CPI, Irgacure 184) and a natural photoinitiator (NPI, a mixture of biobased 3-hydroxyflavone and n-phenylglycine) were used for UVC. No initiator was used during HC. Isothermal gravimetric analyses, Fourier Transform Infrared (FTIR) measurements, and gel content measurements revealed that all three methods were effective in crosslinking, with HC being the most efficient. All methods increased the maximum strengths of film, with HC causing the largest increase (from 4.14 to 7.37 MPa). This is consistent with a higher degree of crosslinking occurring with HC. DSC analyses showed that the T_g signal flattened as film crosslink densities increased, even disappearing in the case of HC and UVC with CPI. Thermal gravimetric analyses (TGA) indicated that films cured with NPI were least affected by degradation during curing. These results suggest that cured starch oleate films could be suitable for replacing the fossil-fuel-derived plastics currently used in mulch films or packaging applications.

The Evolution of Catalysis for Alkyd Coatings: Responding to Impending Cobalt Reclassification with Very Active Iron and Manganese Catalysts, Using Polydentate Nitrogen Donor Ligands

Autoxidation processes to achieve curing of alkyd resins in paints, inks, and coatings are ubiquitous in many applications. Cobalt soaps have been employed for these applications for many decades and most of the paint and ink alkyd resin formulations have been optimized to achieve optimal benefits of the cobalt soaps. However, cobalt soaps are under increased scrutiny because of likely reclassification as carcinogenic under REACH (Registration, Evaluation, Authorisation, and Restrictions of Chemicals) legislation in Europe. This is critical, since such coatings are available for regular human contact. Alternative manganese- and iron-based siccatives have been developed to address this need for over a decade. They often show very high curing activity depending on the organic ligands bound to the metal centers. Recently, new classes of catalysts and modes of application have been published or patented to create safe paints, whilst delivering performance benefits via their unique reaction mechanisms. Besides the use of well-defined, preformed catalysts, paint formulations have also been developed with mixtures of metal soaps and ligands that form active species in-situ. The change from Co-soaps to Mn- and Fe-based siccatives meant that important coating issues related to radical-based curing, such as skinning, had to be rethought. In this paper we will review the new catalyst technologies and their performance and modes of action, as well as new compounds developed to provide anti-skinning benefits.

Synthesis and characterisation of alkyd resins with glutamic acid-based monomers

Alkyd resins are versatile polymers which have applications in inks and various coatings like decorative paints. They are mainly composed of fatty acids, polyols and aromatic diacids. In this work, glutamic acid as well as N-acylated and N-alkylated derivatives there of were evaluated as bio-based substitutes for these aromatic diacid monomers in the synthesis of alkyd resins. The resins were characterised in terms of structure, molecular weight, viscosity, oxidative thermal stability and colour. N-Palmitoylglutamic acid dimethyl ester can be successfully incorporated when the polycondensation is performed in two steps. In this approach, the bio-based diacid monomer is only supplied in the second step, because the removal of water in the first step is essential to avoid hydrolysis of the monomer amide bond and the subsequent formation of pyroglutamate groups. The molecular weight, viscosity and oxidative thermal stability are lower than for conventional alkyd resins. The mechanism of the discolouration of alkyd resins during polymerisation is mediated by free radical species, which were generated easily in the presence of free amino groups and/or unsaturated fatty acids. Light-coloured resins could be obtained by using saturated fatty acids or radical scavengers during polymerisation.

Novel alkyd polyester resins for the paint industry using biobased glutamic acid instead of petrochemicals.

Antioxidant effects of pH-regulating agents on the thermal deterioration of vegetable oils

pH-Regulating agents, such as sodium tartrate, disodium succinate, and trisodium citrate, were investigated for their antioxidant activities during the thermal deterioration of vegetable oils. Refined rapeseed and rice bran oils, supplemented with pH-regulating agents and α-tocopherol (0.1%) were heated at 180℃. After heating, acid values (AVs), carbonyl values (CVs), polar material contents, and color (absorbance at 420 nm) of each sample were measured. All pH-regulating agents gave rise to reduced AVs, CVs, and polar material contents of vegetable oils during heating relative to samples not containing a pHregulating agent. Rapeseed and rice bran oils supplemented with sodium tartrate showed the lowest AVs, CVs, polar material contents and absorbances at 420 nm after heating. Sodium tartrate not only retarded the hydrolysis, thermal oxidation, polymerization, and coloration of both oils while heating at high temperatures, but it also showed antioxidant activity at the supplementation level of 0.01%. The antioxidant activity of sodium tartrate was higher than that of α-tocopherol during the deterioration of vegetable oils. Sodium tartrate was particularly effective retarding hydrolysis while heating at high temperatures, resulting in increase of AVs of vegetable oils. Sodium tartrate is therefore expected to be an effective antioxidant for the thermal deterioration of fats and oils during deep-fat frying.

Low temperature oxidation of linseed oil: a review

This review analyses and summarises the previous investigations on the oxidation of linseed oil and the self-heating of cotton and other materials impregnated with the oil. It discusses the composition and chemical structure of linseed oil, including its drying properties. The review describes several experimental methods used to test the propensity of the oil to induce spontaneous heating and ignition of lignocellulosic materials soaked with the oil. It covers the thermal ignition of the lignocellulosic substrates impregnated with the oil and it critically evaluates the analytical methods applied to investigate the oxidation reactions of linseed oil.

Initiation of radical chains by singlet oxygen (1Δg), and their propagation underpin the mechanism of oxidation of linseed oil, leading to the self-heating and formation of volatile organic species and higher molecular weight compounds. The review also discusses the role of metal complexes of cobalt, iron and manganese in catalysing the oxidative drying of linseed oil, summarising some kinetic parameters such as the rate constants of the peroxidation reactions.

With respect to fire safety, the classical theory of self-ignition does not account for radical and catalytic reactions and appears to offer limited insights into the autoignition of lignocellulosic materials soaked with linseed oil. New theoretical and numerical treatments of oxidation of such materials need to be developed. The self-ignition induced by linseed oil is predicated on the presence of both a metal catalyst and a lignocellulosic substrate, and the absence of any prior thermal treatment of the oil, which destroys both peroxy radicals and singlet O2 sensitisers. An overview of peroxyl chemistry included in the article will be useful to those working in areas of fire science, paint drying, indoor air quality, biofuels and lipid oxidation.