Microcomputer-based pulse stimulator

An HFAC block-capable and module-extendable 4-channel stimulator for acute neurophysiology

OBJECTIVE

This paper describes the design, testing and use of a novel multichannel block-capable stimulator for acute neurophysiology experiments to study highly selective neural interfacing techniques. This paper demonstrates the stimulator's ability to excite and inhibit nerve activity in the rat sciatic nerve model concurrently using monophasic and biphasic nerve stimulation as well as high-frequency alternating current (HFAC).

APPROACH

The proposed stimulator uses a Howland Current Pump circuit as the main analogue stimulator element. 4 current output channels with a common return path were implemented on printed circuit board using Commercial Off-The-Shelf components. Programmable operation is carried out by an ARM Cortex-M4 Microcontroller on the Freescale freedom development platform (K64F).

MAIN RESULTS

This stimulator design achieves ± 10 mA of output current with ± 15 V of compliance and less than 6 µA of resolution using a quad-channel 12-bit external DAC, for four independently driven channels. This allows the stimulator to carry out both excitatory and inhibitory (HFAC block) stimulation. DC Output impedance is above 1 M Ω. Overall cost for materials i.e. PCB boards and electronic components is less than USD 450 or GBP 350 and device size is approximately 9 cm × 6 cm × 5 cm.

SIGNIFICANCE

Experimental neurophysiology often requires significant investment in bulky equipment for specific stimulation requirements, especially when using HFAC block. Different stimulators have limited means of communicating with each other, making protocols more complicated. This device provides an effective solution for multi-channel stimulation and block of nerves, enabling studies on selective neural interfacing in acute scenarios with an affordable, portable and space-saving design for the laboratory. The stimulator can be further upgraded with additional modules to extend functionality while maintaining straightforward programming and integration of functions with one controller. Additionally, all source files including all code and PCB design files are freely available to the community to use and further develop.

A Closed-Loop Electrical Stimulation System for Cardiac Cell Cultures

An integrated electrical stimulation and recording system was designed for closed-loop control and analysis of cardiac cultures on planar microelectrode arrays. Stimulated action potentials from HL-1 clonal myocyte cultures were digitized, stimulation artifacts were removed using nulling and filtering methods, and analysis was performed to determine stimulation efficacy in real time. Results of this analysis were used to determine future stimulation waveform parameters such as polarity, amplitude, pulse duration, and rate or pattern. Algorithms were designed utilizing real-time analysis and control to maintain a desired electrophysiological response of the culture, such as an arbitrary capture fraction value. This paper presents the hardware and software design of the stimulus pulse circuitry, artifact extraction, analysis, and control components of the system. Applications of this technology include the study of cardiac cell physiology, improving the speed and accuracy of traditional open-loop stimulation protocols, pharmacological screening, and improving the performance of biosensors based on sensing electrical activity in cardiac cultures.

Pulser: user-friendly, graphical user-interface based software for controlling stimuli during data acquisition with Spike2 for Windows

This paper describes software that runs in the Spike2 for Windows environment and provides a versatile tool for generating stimuli during data acquisition from the 1401 family of interfaces (CED, UK). A graphical user interface (GUI) is used to provide dynamic control of stimulus timing. Both single stimuli and trains of stimuli can be generated. The pulse generation routines make use of programmable variables within the interface and allow these to be rapidly changed during an experiment. The routines therefore provide the ease-of-use associated with external, stand-alone pulse generators. Complex stimulus protocols can be loaded from an external text file and facilities are included to create these files through the GUI. The software consists of a Spike2 script that runs in the host PC, and accompanying routines written in the 1401 sequencer control code, that run in the 1401 interface. Handshaking between the PC and the interface card are built into the routines and provides for full integration of sampling, analysis and stimulus generation during an experiment. Control of the 1401 digital-to-analogue converters is also provided; this allows control of stimulus amplitude as well as timing and also provides a sample-hold feature that may be used to remove DC offsets and drift from recorded data.