Regulation of SP60 mRNA during development of Dictyostelium discoideum

Analysis of a novel cyclic Amp inducible prespore gene in Dictyostelium discoideum: evidence for different patterns of cAMP regulation

The D7 cDNA clone hybridizes to a 2.8 kb mRNA which first appears at the mound stage of development in the cellular slime mold Dictyostelium discoideum. This gene which is cyclic AMP (cAMP) inducible and is expressed specifically in the prespore cells contains an open reading frame interrupted by only one intron. The predicted amino acid sequence indicates a novel prespore protein which differs from all of the previously described prespore proteins in that it contains no internal repeats and does not share any homology with any of the other prespore genes. The amino acid sequence predicts a protein of 850 amino acids with a molecular weight of 95,343 daltons and an isoelectric point of 4.25. The protein is very rich in glutamine (13.8%), asparagine (10.6%) and glutamic acid (10.4%) with one potential glycosylation site and 28 possible sites for phosphorylation. The amino terminus is hydrophobic with characteristics of a signal sequence while the entire carboxyl half of the protein is notable for its hydrophilicity. Comparison of cAMP regulation of the D7 gene with the regulation of two other cAMP regulated prespore genes, the PL3(SP87) gene and the Psa(D19), reveals some striking differences. Disaggregation in the presence of cAMP results in transient degradation of mRNA for all three genes. The transcription rate for the D7 and PsA(D19) genes remains relatively unaffected by disaggregation but there is a rapid although transient decline in the transcription rate of the PL3(SP87) gene. Although the accumulation of all three mRNAs is first detectable at mound stage, transcription of the D7 and PsA(D19) genes is detected earlier in development, at rippling aggregate stage several hours prior to the earliest time when transcription of the PL3(SP87) gene is detected. Analysis of the promoter region of the D7 gene reveals three CA like boxes flanked by direct repeats as well as four G rich regions that may serve as regulatory elements.

A prespore gene, Dd31, expressed during culmination of Dictyostelium discoideum

During culmination of Dictyostelium fruiting bodies, prespore and prestalk cells undergo terminal differentiation to form spores and a cellular stalk. A genomic fragment was isolated by random cloning that hybridizes to a 1.4-kb mRNA present during culmination. Cell type separations at culmination showed that the mRNA is present in prespore cells and spores, but not in prestalk or stalk cells. After genomic mapping, an additional 3 kb of DNA surrounding the original 1-kb fragment was cloned. The gene was sequenced and named Dd31 after the size of the predicted protein product in kilodaltons. Accumulation of Dd31 mRNA occurs immediately prior to sporulation. Addition of 20 mM 8-Br-cAMP to cells dissociated from Mexican hat stage culminants induced sporulation and the accumulation of Dd31 mRNA, while 20 mM cAMP did not. Dd31 mRNA does not accumulate in the homeotic mutant stalky in which prespore cells are converted to stalk cells rather than spores. Characterization of Dd31 extends the known temporal dependent sequence of molecular differentiations to sporulation.

Coordinate regulation of the spore coat genes in Dictyostelium discoideum

Genomic clones of the genes coding for the three major spore coat proteins, SP60, SP70, and SP96, were used to measure the accumulation of their respective mRNAs in mutant and wild-type cells allowed to develop under a variety of conditions. These prespore-specific mRNAs were found to be both temporally and quantitatively coordinate under all conditions indicating that they may be subject to identical regulatory processes. Accumulation of the spore coat mRNAs is dependent upon the function of both cAMP receptors and G alpha 2 proteins during the aggregation stage as well as upon concomitant protein synthesis. When cells are dissociated from aggregates at 10 hr of development and rapidly shaken in 0.1 mM EDTA they form clumps but do not accumulate any of the prespore-specific RNAs assayed. However, if either 0.1 mM Ca++ or 20 microM cAMP is added to these cells, the spore coat mRNAs accumulate. Lower concentrations of either Ca++ or cAMP had no effect. These results suggest that expression of the spore coat genes normally involves a Ca+(+)-dependent process, but the Ca++ requirement can be overcome by adding high concentrations of exogenous cAMP. Addition of 50 nM DIF to dissociated cell blocks the accumulation of the spore coat mRNAs even when cAMP or Ca++ is present. The upstream regions of the spore coat genes were compared to those of another gene, D19, that codes for the prespore-specific protein SP29. Short sequences related to CACCCAC were found at about the same position relative to the transcriptional start sites of these coordinately regulated genes.

Isolation and characterization of spore coat protein (sp96) gene of Dictyostelium discoideum

A cDNA library was constructed from poly(A)+ RNA isolated from slug cells of Dictyostelium discoideum, using lambda gt11 phage, and screened with an antiserum specific for the spore coat protein sp96. A positive clone was obtained and the gene product was identified as sp96. The sp96 mRNA is 2.2 kb in size, and it starts to accumulate at the tipped aggregate stage only in prespore cells. Southern analysis using nuclear DNA established that the sp96 gene is unique. Two genomic clones containing the sp96 gene were isolated and the sequence of the gene established. The coding region contains a long open reading frame interrupted by a single intron.

Developmental expression and characterization of the gene encoding spore coat protein SP60 in Dictyostelium discoideum

The complete coding sequence, upstream sequence and developmental expression of Dictyostelium discoideum AX2 spore coat protein gene SP60 is reported. The gene contains two exons, 154bp and 1121bp long, separated by a 119bp intron, and encodes a protein of 46,925 molecular weight plus a 23-amino-acid hydrophobic leader sequence. The N-terminus of the mature protein consists of four copies of a perfect hexapeptide repeat (GDWNNN). The central region is rich in cysteine residues, including four highly conserved cysteine-rich repeats with homology to 'EGF-like' repeats. The C-terminus is aspartate-rich and composed of multiple imperfect copies of a D(G/D)DYD repeat followed by several repeats of the tetrapeptide DNDW and derived sequences. A TATA box promoter motif juxtaposed to an oligo(dA) stretch lies 52bp upstream of the main transcriptional start site of the gene. Six AC-rich boxes occur in the region -327 to -556, all of which contain the consensus sequence CACAC. Two GC-rich boxes and a C-rich element (TTACCCCA) are also present upstream. Another open reading frame is positioned a short distance downstream of the SP60 gene in the opposite transcriptional orientation. Expression of the SP60 gene ceases upon disaggregation to single cells and cannot be restored by high levels of extracellular cAMP either alone or in combination with conditioned medium factors.

A spatial gradient of expression of a cAMP-regulated prespore cell-type-specific gene in Dictyostelium

Previously, we identified a class of genes in Dictyostelium that are prespore cell-type specific in their expression in the multicellular aggregate and are inducible by cAMP acting through cell-surface cAMP receptors. In this paper, we report the cloning and analysis of the regulatory regions controlling the expression of one such gene that encodes a spore coat protein, SP60. By use of a fusion of the firefly luciferase gene and Escherichia coli lacZ [expresses beta-galactosidase (beta-gal)], we have identified cis-acting regions required for proper spatial and temporal expression in multicellular aggregates and for cAMP induction in shaking cell culture. Deletion analysis suggests that a CA-rich element (CAE) and surrounding sequences present three times within the 5'-flanking sequence are required for proper regulation. SP60-lacZ fusions that include all three of these regions express lacZ only in the posterior approximately 85% of migrating slugs (prespore zone). Studies show that SP60 is expressed during mid to late aggregation, and SP60-lacZ-positive cells are spatially localized as a doughnut-shaped ring within the forming aggregate. Cells within the skirt that surrounds the aggregate and that are still migrating into the aggregate do not stain. Sequential 5' deletions of CAEs and surrounding regions affect the expression level of SP60-luciferase in response to developmental signals and cAMP, as well as the spatial pattern of SP60-lacZ. Deletion of the first (most 5') of these regions restricts the spatial expression of SP60-lacZ fusions to the anterior of the prespore zone. When both the first and second regions are removed, the expression level drops, and the staining is restricted to the prespore/prestalk boundary. Furthermore, the staining pattern that is seen with these two deletions is present as a gradient from anterior to posterior within the prespore zone. Deletion of all three regions results in a loss of both cAMP and developmentally induced expression. These results suggest the presence of a gradient within the prespore zone that differentially affects the activity of promoters containing different numbers of response elements.

Spore coat genes SP60 and SP70 of Dictyostelium discoideum

We cloned and sequenced the genes for two of the major proteins found in spore coats of Dictyostelium discoideum. The predicted translation product of each of these genes starts with a hydrophobic signal sequence that is subsequently cleaved. Expression of these spore coat genes is coordinate in prespore cells.

Spore coat genes SP60 and SP70 of Dictyostelium discoideum

We cloned and sequenced the genes for two of the major proteins found in spore coats of Dictyostelium discoideum. The predicted translation product of each of these genes starts with a hydrophobic signal sequence that is subsequently cleaved. Expression of these spore coat genes is coordinate in prespore cells.

Developmental consequences of the lack of myosin heavy chain in Dictyostelium discoideum

Two different Dictyostelium discoideum cell lines that lack myosin heavy chain protein (MHC A) have been previously described. One cell line (mhcA) was created by antisense RNA inactivation of the endogenous mRNA and the other (HMM) by insertional mutagenesis of the endogenous myosin gene. The two cell lines show similar developmental defects; they are delayed in aggregation and become arrested at the mound stage. However, when cells that lack myosin heavy chain are mixed with wild-type cells, some of the mutant cells are capable of completing development to form mature spores. The pattern of expression of a number of developmentally regulated genes has been examined in both mutant cell lines. Although morphogenesis becomes aberrant before aggregation is completed, all of the markers that we have examined are expressed normally. These include genes expressed prior to aggregation as well as prespore genes expressed later in development. It appears that the signals necessary for cell-type differentiation are generated in the aborted structures formed by cells lacking MHC A. The mhcA cells have negligible amounts of MHC A protein while the HMM cells express normal amounts of a fragment of the myosin heavy chain protein similar to heavy meromyosin (HMM). The expression of myosin light chain was examined in these two cell lines. HMM cells accumulate normal amounts of the 18,000-D light chain, while the amount of light chain in mhcA cells is dramatically reduced. It is likely that the light chains assemble normally with the HMM fragment in HMM cells, while in cells lacking myosin heavy chain (mhcA) the light chains are unstable.