Electrical effects on the proliferation of living HeLa cells cultured on optically transparent electrode surface

Rapid real-time monitoring of NO released from living cells using multi-walled carbon nanotube-7,7,8,8-tetracyanoquinonedimethyl-polylysine sensors

Nitric oxide (NO) is an important but short-lived signaling molecule that is released from living cells. Real-time monitoring of NO release is useful for understanding normal cellular physiology and pathology. Herein, a convenient and efficient NO sensor was developed using multiwalled carbon nanotubes (MWCNTs)-7,7,8,8-tetracyanoquinodimethan (TCNQ)-polylysine (PLL) modified screen-printed electrode (SPE). The construction of the sensor (MWCNTs/TCNQ/PLL/SPE) was based on the synergic effect of the good conductivity of TCNQ and the high surface area of MWCNTs. The introduction of the cell-adhesive molecule PLL significantly enhanced the cytocompatibility, resulting in excellent cell attachment and growth. The resulting MWCNTs/TCNQ/PLL/SPE was successfully used for the real-time detection of NO released from living human umbilical vein endothelial cells (HUVECs) cultured on it. The MWCNTs/TCNQ/PLL/SPE was further used to detect NO release from oxidative-injured HUVECs with and without resveratrol to also preliminarily assess the effect of resveratrol against oxidative damage. The sensor developed in this study showed good performance for the real-time detection of NO released by HUVECs under different conditions and has potential applications in the diagnosis of biological processes and the screening of drug treatment effects.

Planar carbon electrodes for real-time quantification of hydrogen sulfide release from cells

A planar electrode system was developed to permit the real-time, selective detection of hydrogen sulfide (H₂S) from stimulated cells. Planar carbon electrodes were produced via stencil printing carbon ink through a laser cut vinyl mask. Electrodes were preconditioned using a constant potential amperometry methodology to prevent sensor drift resulting from elemental sulfur adsorption. Modification with a bilaminar coating (electropolymerized ortho-phenylenediamine and a fluorinated xerogel) facilitated high selectivity to H₂S. To demonstrate the biological application of this planar sensor system, H₂S released from 17β-estradiol-stimulated human umbilical vein endothelial cells (HUVECs) was quantified in situ in real-time. Stimulated HUVECs released sustained H₂S levels for hours before returning to baseline. Cellular viability assays demonstrated negligible cell cytotoxicity at the electrochemical potentials required for analysis.

Electrical Stimulation and Cellular Behaviors in Electric Field in Biomedical Research

Research on the cellular response to electrical stimulation (ES) and its mechanisms focusing on potential clinic applications has been quietly intensified recently. However, the unconventional nature of this methodology has fertilized a great variety of techniques that make the interpretation and comparison of experimental outcomes complicated. This work reviews more than a hundred publications identified mostly from Medline, categorizes the techniques, and comments on their merits and weaknesses. Electrode-based ES, conductive substrate-mediated ES, and noninvasive stimulation are the three principal categories used in biomedical research and clinic. ES has been found to enhance cell proliferation, growth, migration, and stem cell differentiation, showing an important potential in manipulating cellular activities in both normal and pathological conditions. However, inappropriate parameters or setup can have negative effects. The complexity of the delivered electric signals depends on how they are generated and in what form. It is also difficult to equate one set of parameters with another. Mechanistic studies are rare and badly needed. Even so, ES in combination with advanced materials and nanotechnology is developing a strong footing in biomedical research and regenerative medicine.

Optically transparent electrodes to study living cells: A mini review

The use of electrochemical methods to study living systems, including cells, has been of interest to researchers for a long time. Thus, controlling the polarization of the electrode contacting living cells, one can influence, for example, their proliferation or the synthesis of specific proteins. Moreover, the electrochemical approach formed the basis of the biocompatibility improvement of the materials contacting with body tissues that use in carbon hemosorbents and implants development. It became possible to reach a fundamentally new level in the study of cell activity with the introduction of optically transparent electrodes in this area. The advantage of the using of optically transparent electrodes is the possibility of simultaneous analysis of living cells by electrochemical and microscopic methods. The use of such materials allowed approaching to the study of the influence of the electrode potential on adhesion activity and morphology of the different cell types (HeLa cells, endothelial cell, etc.) more detailed. There are a negligible number of publications in this area despite the advantages of the usage of optically transparent electrodes to study living cells. This mini-review is devoted to some aspects of the interaction of living cells with conductive materials and current advances in the use of optically transparent electrodes for the study of living cells, as well as the prospects for their use in cellular technologies.

Influences of electric field on living cells in a charged water-in-oil droplet under electrophoretic actuation

We experimentally investigate the effects of high electric field on living cells inside a charged droplet under electrophoretic actuation. When an aqueous droplet suspended in a dielectric liquid contacts with electrified electrode, the droplet acquires charge. This charged droplet undergoes electrophoretic motion under strong electric field (1-3 kV/cm), which can be used as a droplet manipulation method in biomicrofluidic applications. However, because strong electric field and use of dielectric oil can be a harmful environment for living cells, the biological feasibilities have been tested. Trypan blue test and cell growth test have been performed to check the viability and proliferation of cells in a droplet under various electric field strengths and actuation times. We have not observed any noticeable influence of electric field and silicone oil on the viability and proliferation of cells, which indicates that electrophoresis could be safely used as a manipulation method for a droplet containing living biological system.

Sensitivity to electrical stimulation of human immunodeficiency virus type 1 and MAGIC-5 cells

To determine the sensitivities to low electrical potential of human immunodeficiency virus type 1 (HIV-1) and its target cells, HIV-1 and MAGIC-5 cells were directly stimulated with a constant direct current potential of 1.0 V (vs. Ag/AgCl). HIV-1 was incubated for 3 h at 37°C on a poly-L-lysine-coated indium-tin oxide electrode, and then stimulated by an electrical potential. MAGIC-5 cells were seeded onto the electrically stimulated HIV-1 and cultured for 3 days at 37°C. HIV-1-infected cells were measured by multinuclear activation via a galactosidase indicator assay. MAGIC-5 cells were also stimulated by an electrical potential of 1.0 V; cell damage, proliferation and apoptosis were evaluated by trypan blue staining, cell counting and in situ apoptosis detection, respectively. HIV-1 was found to be damaged to a greater extent by electrical stimulation than the cells. In particular, after application of a 1.0-V potential for 3 min, HIV-1_LAI and HIV-1_KMT infection were inhibited by about 90%, but changes in cell damage, proliferation and apoptosis were virtually undetectable. These results suggested that HIV-1 is significantly more susceptible to low electrical potential than cells. This finding could form the basis of a novel therapeutic strategy against HIV-1 infection.

Application of conductive polymers, scaffolds and electrical stimulation for nerve tissue engineering

Among the numerous attempts to integrate tissue engineering concepts into strategies to repair nearly all parts of the body, neuronal repair stands out. This is partially due to the complexity of the nervous anatomical system, its functioning and the inefficiency of conventional repair approaches, which are based on single components of either biomaterials or cells alone. Electrical stimulation has been shown to enhance the nerve regeneration process and this consequently makes the use of electrically conductive polymers very attractive for the construction of scaffolds for nerve tissue engineering. In this review, by taking into consideration the electrical properties of nerve cells and the effect of electrical stimulation on nerve cells, we discuss the most commonly utilized conductive polymers, polypyrrole (PPy) and polyaniline (PANI), along with their design and modifications, thus making them suitable scaffolds for nerve tissue engineering. Other electrospun, composite, conductive scaffolds, such as PANI/gelatin and PPy/poly(ε-caprolactone), with or without electrical stimulation, are also discussed. Different procedures of electrical stimulation which have been used in tissue engineering, with examples on their specific applications in tissue engineering, are also discussed.

Development and application of a stable HeLa cell line capable of site-specific transgenesis using the Cre-lox system: establishment and application of a stable TNFRI knockdown cell line to cytotoxicity assay

Mammalian cell models for gene knock-out/knock-in experiments are important for functional analysis of genes and have a potential of useful tool for toxicological studies. However, uncontrolled insertion of transgenes has raised significant concerns over unwanted side effects. To address this issue, we established a stable HeLa55 cell line capable of site-specific transgenesis by means of Cre-mediated cassette exchange at a site on the long arm of human chromosome 9 containing no constitutive transcripts. We applied HeLa55 to transgenesis of the green fluorescent protein (GFP) gene based on recombinase-mediated cassette exchange. The transformants stably expressed GFP transgenes, even after cryopreservation, without compromising physiological properties. We produced an RNA interference (RNAi)-inducible knockdown stable cell line against human tumor necrosis factor (TNF) receptor I, and one cloned stable cell line (TNFRIKD cells) exhibited long-term gene silencing with significant reduction (ca. 85%) and markedly resisted cytotoxicity induced by TNFalpha. Furthermore, xenobiotics were exposed to stable TNFRIKD cells and different cytotoxicity was exhibited based on various toxicological properties. Thus, we showed the feasibility of RNAi-based stable knockdown cells for xenobiotics-induced cytotoxicity, and HeLa55 has wide application for the generation of stable knock-in and knock-down cells mediated by RNAi.

Effect of electrical stimulation on human immunodeficiency virus type-1 infectivity

We examined the effects of electrical stimulation on HIV-1-adsorbed MAGIC-5 (MAGIC-5/HIV-1) cells and unadsorbed MAGIC-5 (MAGIC-5) cells. When MAGIC-5 cells were stimulated by a constant d.c. potential of 1.0 V (vs Ag/Agcl) immediately after HIV-1(LAI) infection, infectivity was more affected by electrical stimulation than by cell membrane damage. In particular, after application of potential at 1.0 V for 5 min, about 1% of the membranes of the MAGIC-5/HIV-1(LAI) cells were damaged, but the infectivities of both HIV-1(LAI) and HIV-1(NL43-luc) cells decreased about 37 and 44%, respectively (p < 0.05). After application of potential at 1.0 V for 5 min, the mean fluorescence intensities (MFIs) of highly reactive oxygen species (hROS) and nitric oxide (NO) in MAGIC-5/HIV-1(NL43-Luc) cells were significantly increased compared with that of unstimulated MAGIC-5/HIV-1(NL43-Luc) cells (p < 0.01). However, the MFIs of hROS and NO in MAGIC-5 cells were also increased, to the same level, by electrical stimulation for 5 min. These results suggest that HIV-1 adsorbed onto or invading cells is damaged by direct or indirect effects of electrical stimulation, resulting in a decrease in HIV-1 infectivity. It is also suggested that hROS and NO induced by electrical stimulation are important factors for inhibiting HIV-1 infection.

Frequency change-induced alternative potential waveform dependence of membrane damage to cells cultured on an electrode surface

In the present study, alternative potential stimulation with rectangular pulse, sine and triangular waveforms at 10 and 100Hz was applied to cells cultured on an ITO electrode. As a result, we found that the alternating potential waveform dependence induced by the frequency on membrane damage of cells cultured on an electrode surface. The cell membrane damage was promoted by a rectangular pulse wave in comparison with sine and triangular waves, when alternating electrical potentials of 0 to +1.0V at 100Hz were loaded. In contrast, this waveform dependence was not observed when the frequency was 10Hz. Furthermore, it was found that cell membrane damage was induced at positive potentials more than +0.8V under the present experimental conditions.

Combined effect of electrical stimulation and cisplatin in HeLa cell death

The combined effect of electrical stimulation and cisplatin administration on HeLa cells was investigated. The combination of electric potentials (-0.5 V to 0.5 V) with 10-Hz frequency and 1000 ng/mL cisplatin decreased cancer cell viability by 32% and was more effective than either treatment given alone. Combined treatment with cisplatin and electrical stimulation also increased the number of apoptotic cells. It is shown that the efficacy of cisplatin was enhanced in electrically stimulated HeLa cells, and the addition of electrical stimulation amplified the chemotherapeutic effect of cisplatin in cervical cancer cells.

Electrically controlled proliferation of human carcinoma cells cultured on the surface of an electrode

Human carcinoma cells, MKN45, were cultured on the surface of a metal-coated plastic plate electrode the potential of which was controlled. The proliferation rate and cell morphology were altered depending on the applied potential. Cell proliferation was halted in the potential range above 0.4 V vs. Ag/AgCl, although cells started to proliferate again when the applied potential was shifted from 0.4 V to 0.1 V vs. Ag/AgCl. Fluorescence probe studies indicated that the fluidity of plasma membrane decreased in association with halting of cell proliferation. These results suggest that electrical stimulation causes cells to temporarily halt proliferation, and that cell proliferation was reversibly controlled by electrode potential. The mechanism is interpreted in relation to the change of plasma membrane structure represented by membrane fluidity.